applied plate 中文意思是什麼

applied plate 解釋
堵漏夾板
  • applied : adj. 適用的，應用的，實用的 （opp. pure, abstract, theoretical）。
  • plate : n 1 厚金屬板 〈cf sheet〉 板（片）；（記有姓名等的金屬）牌子，（尤指醫生的）招牌，藏書牌；【印刷...
  1. From the analysis, some suggestion about joint rigidity design is put forward : 1. joint initial rigidity can be enhanced within the limited range when to increase end - plate thickness ; 2. the rigidity and ultimate moment can be enhanced obviously when to adopt the beam with inclined section or to add axilla at the connections between beam and column ; 3. withm the permissive construction condition, exteriorly extended end - plate inclinedly placed is suggested to be applied firstly ; 4. when the rate of joint rigidity to beam rigidity, that is called, is less than 0. 1, the joints can be regarded as zero - rigidity joints ; on the other hand, if is more than 26, it is rigid connection joints

    採用斜截面梁並在樑柱交接處局部加腋能明顯提高節點剛度和梁的抗彎能力； 3在允許的施工條件下，應優先採用外伸式端板斜放節點，有利於提高節點剛度，進而提高節點的抗彎能力； 4節點剛度與其連接構件的剛度比值0 . 1時，可按鉸接節點設計； 26時，可按剛接節點設計。
  2. Hf - current in monopolar electrosurgery flows from an active electrode ( i. e. the instrument ) through the patient ' s body to a neutral electrode, patient plate, applied o his / her body

    在單極高頻外科手術中，高頻電流從活動電極（例如儀器本身）流經病人身體到達中性電極（附著在病人身體的病人板）
  3. Furthermore, in order to predict the force at beam tension flange when end - plate yields, kulak method, applied to determine the ultimate strength of the t - stub connections, are modified by introducing a parameter c. the general solution of parameter c is also provided in this paper

    在有限元計算的基礎上，本文分析了影響節點強度的主要因素，包括： （ 1 ）螺栓和端板的強度； （ 2 ）柱翼緣的抗壓強度； （ 3 ）柱腹板的抗壓強度。
  4. This machine is applied to sawing thread clearance during the course of making from quarto to super - largedie cutting plate

    本機適合於四開到超大全張的各種模切版製作時線縫的鋸制。
  5. In the thesis, sand packed glass plate model was applied to physical simulation of the macroscopic throats forming mechanism, studied effects of these factors as sedimental characteristics, petrophysical property, production process etc. on the forming of macroscopic throats

    摘要動用填砂玻璃板模型對疏鬆砂巖油層大孔道形成機理進行物理模擬，探討了沉積特徵、油層物性、開發過程等因素對大孔道形成的影響，歸納了大孔道形成的因素模型及大孔道形成過程中的產量壓力特徵。
  6. This paper focuses on the research of the stress mechanism of the ribbed shell structure in statics, dynamics and under the explosive load on the basis of the engineering practice of cave depot of single aircraft. in this paper, according to the classical shell theories, the basic differential equilibrium of the ribbed shell structure and the finite element analysis of 3d rippled plate are established, in which the function of annular ribs reinforcement bars and 3d ripped steel plates are distributed in the range of the steel, and the functions along the longitude direction of tension, bending, and torsion are neglected ; applied with dynamic analytical theory, the dynamic model of ribbed shell structure and the analytical theory model of elastic - plastic are set up ; the triangle series method is used to solve the displacement and stress under the distributed load and the concentrated load of the ribbed shell structure

    本文以軍用機場地面單機掩蔽庫工程建設為工程背景，首次對內襯三維波紋鋼板混凝土拱型復合結構的受力機理進行了靜力、動力和爆炸荷載的分析研究。根據將橫肋、鋼筋及三維波紋鋼板的作用均勻分佈在殼體范圍內的情況，忽略橫肋、鋼筋及三維波紋鋼板沿殼體母線方向的抗拉、抗彎及其抗扭作用，首次推導出了內襯三維波紋鋼板混凝土殼體的微分平衡方程，建立了有限元計算模型，並採用三角函數法，求解了三維波紋鋼板混凝土拱型復合結構在分佈荷載和集中荷載作用下的位移響應和應力響應，並與普通殼體進行了比較。
  7. The experiment procedure and analysis result about exteriorly extended end - plate connection with high strength bolt are introduced primarily ; each sample ' s dimension is given. the adding load equipment, measuring apparatus placed, measuring point established is detailed. adding load measure load and m - curve is produced ; the single span gabled frames horizontal displacement formula is deduced when the horizontal concentrated force is applied to it

    重點介紹了外伸端板高強螺栓連接的實驗過程及實驗分析結果，介紹了各組試件的形狀尺寸、加載裝置、測量儀器安放、測點的布置等；給出加載方式及測出的m -曲線；計算出試驗節點的初始剛度；推導水平集中力作用下單跨門式剛架考慮節點半剛性的側移計算公式。
  8. They are applied to different situations and verified by experiments. analysis model of small ap oblique penetrating ceramic / metal light armor is established on the basis of energy model and the assumption of ellipse absorbing the same energy in back plate, giving the predictable formula about ballistic limit velocity. with energy model the optimization design in relation to ceramic / metal light armor is analyzed and the optimal coefficient of ceramic / metal composite armor is gained

    本文的主要研究內容如下： （一）建立了小型穿甲彈垂直侵徹陶瓷/金屬輕型裝甲的動量模型和能量模型，它們分別適用不同情況，並通過試驗驗證；基於能量模型和背板橢圓吸能相同假設，建立了小型穿甲彈斜侵徹陶瓷/金屬輕型裝甲的分析模型，給出了彈道極限速度預測公式；利用能量模型對陶瓷/金屬輕型裝甲的優化設計進行了分析，給出了陶瓷/金屬復合裝甲的最佳優化系數。
  9. Aiming at converting the loading problem in space into the one in plate, the theories of loading distribution along crosswise are applied

    作者對空間橋跨結構中的荷載橫向分佈理論進行了系統地論述。
  10. The shuttle plate and parts in this area at the front of the machine should be well dried and a little oil applied to prevent any rust.

    機器前面的梭形板及位於該處的各個零件應仔細擦乾並加少量的油，以防生銹。
  11. Equally obvious is that the force applied to move the plates must be capable, at least occasionally, of exceeding the tensile strength of the plate material and of breaking a larger plate into two smaller ones

    同樣顯而易見的是，用於移動板塊的力必須能超過板塊物質的拉力強度，並且能將一個較大的板塊分成兩個小板塊，至少有時會是這樣的。
  12. On the basic of a great of literature reading and research on safety of side impact of the car, according to requirement of ece r95, applied madymo6. 2. 1 software, established simulation model of side impact of the car, researched the relationship between side rigidity of the car and passenger injury in side impact, which showed that during first impact the bigger side rigidity was, the more advantaged protection for the car and passenger in a definite range, and which drew a conclusion that the most serious part of passenger injury was pelvis during first impact. then detailed the substructure model by defining bodies, joints, contact types and contact characteristic, researched some improvement approach for side safety of the car, and then analyses a particular case, that was to say to fix vehicle door bar fender on between inner and outer plate of the vehicle door, analyzed the influence of passenger injury when the bar fender was fixed on different position, the result showed that the passenger injury was less when the bar fender was fixed on the height of vehicle door decorate bar. finally, a set of tests were performed, contrasting the simulation result with the test, analyzed the influence of the side rigidity of the car to passenger injury, which showed the test

    本文在對汽車的側面碰撞安全性進行大量文獻閱讀和研究的基礎上，按照歐洲ecer95側面碰撞乘員保護法規的要求，應用多剛體動力學軟體madymo6 . 2 . 1 ，建立了汽車的側面碰撞模擬模型，研究了汽車的側面剛性對乘員損傷的影響，結果表明在「一次碰撞」中，在一定范圍內汽車側面剛性越大，越有利於汽車和乘員的保護，同時得出結論，即在「一次碰撞」過程中人體損傷最嚴重的部位是骨盆;然後通過定義各剛體、鉸鏈、接觸類型以及接觸特性，對該模型進行子結構細化工作，研究了加強汽車側面安全性的若干改進措施，並進行了一個特例分析，即在此模型的車門內外板之間安裝了車門防撞桿，分析了當車門防撞桿安裝在不同位置時對乘員損傷的影響，結果表明防撞桿位於車門裝飾條的高度時，對乘員的損傷較小;最後進行了一組側面碰撞試驗，通過試驗和模擬結果的對比，分析汽車的側面剛性對乘員損傷的影響，表明試驗和模擬結果是一致的，從而證明了模擬模型的有效性以及模擬結果的正確性。
  13. High voltage shunt capacitor installation is comprised of capacitor cabinets or steel racks capacitor, spe - cial fuses for capacitor overload protection, capacitor discharge device, air - cored reactor which is applied to restrain surge current and high freq. harmonic, zno arrester without gaps for overvolage - limiting and high voltage vacuum switch etc. capacitor cabinet is made of highquality cold - rolling steel plate

    高壓並聯電容器成套裝置主要由電容器櫃或鋼架電容器電容器過負荷保護專用熔斷器放電裝置抑制涌流限制高次諧波的空芯電抗器和限制過電壓的無間隙氧化鋅避雷器及高壓真空開關等設備組成。
  14. The fact that cufa ii based on fly ash is applied to whole plate portland cement concrete pavement rapid repair engineering has not been reported at home and abroad

    以粉煤灰為基材的cufa用於水泥混凝土路面整板快速修補工程中，國內外未見報道。
  15. In designing and calculating plate of piled - raft foundation, thick - plate theory has been applied, that is, thick - plate finite element method is mainly used when load and deformation of plate are analyzed

    樁筏基礎筏板的設計、計算採用厚板理論分析，主要用厚板有限元法來分析筏板的受力、變形特點。
  16. These sensor prepared have been applied to analysis of different species. ( 1 ) carbazole is a promising pharmaceutical species. a novel optical sensor for determining doxycycline based on the fluorescence quenching of n - allylcarbazole immobilized on an quartz glass plate surface by covalent bonding has been described

    （ 2 ）用熒光基團2 -氨基苯並噻唑與對烯丙氧基苯甲醛合成了一種新的schiff堿類化合物，研製成了一種schiff堿新穎光化學傳感器，用於呋喃唑酮的測定。
  17. Based on the analysis about the test requirements and the saturated magnetization of the armor plate, the excitation magnetic circuit satisfying the testing condition and a validation system are designed. because the geometric, of the magnetic leakage at the direction of the normal of the roundness fault has the feature of two peaks : a positive and a negative, using the linear regression and the software matlab, two regression equation are proposed : one is about the peak value of the magnetic leakage and the diameter and depth of the roundness fault ; the other is the distance between the two peaks and the diameter of the roundness fault. the result of the validation system proves that the two equations are valid, and an applied method using for quantificationally inspecting the roundness faults is proposed according to the two equations

    根據實驗要求，通過對鋼板達到飽和磁化的必要性進行的分析，設計了符合試驗條件的勵磁磁路，並設計了一套實驗驗證系統；根據圓形缺陷法線分量漏磁場幾何圖形正負雙峰值的特點，採用線性回歸擬合的原理和matlab軟體及其統計工具箱中的相關函數，給出了圓形缺陷漏磁場幾何圖形的峰峰值與圓形缺陷的直徑和深度以及峰峰值間距與圓形缺陷直徑的兩個回歸擬合方程，並通過實驗驗證系統驗證了擬合方程的正確性，利用這兩個簡單實用的擬合方程，提出了一種工程定量檢測圓形缺陷的應用方案。
  18. Based on analysis and comparison of existing test data applied to existing ultimate strength prediction models, interfacial stress at the end of plate is deduced. after formulas for calculating the effective moment of inertia for frp - strengthened beams being revised and adjustment coefficient related to nominal main steel reinforcement ratio and curtailment length ratio being put forward, strength prediction formulas of compound beams under plate end debonding failure are established. in analysis of strength of compound beams under intermediate crack induced interfacial debonding failure mode, several bond strengths and their relation are introduced

    對于板端剝離破壞，在總結現有承載力模型的基礎上，利用已有試驗數據對各承載力計算公式進行了分析比較，進一步採用分階段分析法，推導了板端界面應力的計算公式，在此基礎上，採用加固復合梁有效慣性矩的修正公式，建立了考慮名義配筋率和板端偏移比影響的板端剝離破壞梁承載力的計算公式；對于跨中受彎裂縫導致的粘結破壞，闡述了常見的幾種粘結強度之間的區別和聯系，並基於拉剪粘結強度，提出了跨中受彎裂縫導致粘結破壞的承載力計算公式，並利用現有試驗結果確定了模型中的一些參數；最後，利用試驗數據對本文建立的兩種粘結破壞承載力計算公式進行了檢驗，結果基本吻合。
  19. Abstract : the 2 rock detonator dynamite cu - steel combined plate and testprocess of welding parameter are introduced. the particular semi - cylinder experiment method is introduced. the test result is applied in production and good benefit is obtained

    文摘:介紹了嘗試應用2巖石炸藥爆炸焊接銅鋼復合板及得出其工藝參數的試驗過程，採用了獨特的半圓柱試驗方法，試驗結果應用於實際生產中，獲得了良好的經濟效益。
  20. At the same time, the mathematical models of the electric field and the flow field distribution were established from the theory of electrostatic enhancement of heat transfer. employed finite differential method and over - relaxation iteration method, according to certain boundary conditions in the wire - plate electrode space, the electric field and the flow field in the wire - plate space were numerically simulated under different initial velocities of r11 stream and different magnitudes of applied voltage. the calculation results agreed with theoretical analysis satisfactorily

    同時從靜電強化換熱理論出發，建立了表徵線板電極間的電場和流場分佈的數學模型，並根據線-板電極間的邊界條件，利用有限差分法和超鬆弛迭代法，分別就不同氣流初速度和不同外施電壓的情況下，對線-板空間的電場和流場進行了數值模擬，計算結果與理論分析基本一致。
分享友人
分享到 Line

分享到臉書