cast temperature 中文意思是什麼

cast temperature 解釋
澆鑄溫度
  • cast : vt （cast; cast）1 投，扔，擲，拋。 ★此義動詞通常用 throw cast 只用於若干特殊句子。2 丟棄，拋棄；...
  • temperature : n. 1. 溫度，氣溫。2. 體溫。3. 〈口語〉發燒，高燒。
  1. The welding performance of homemade wear - resistant cast steel has been studied base on the weldability tests, the repair welding procedures of wean - resistant cast steel ( abrasion - plates ) have been made up, the results show that satisfying repair welding quality can be attained with such welding conditions as the low hydrogenous alkalescent welding rod, preheating and slow cooling, strictly maintaining the interbedded temperature of 250 ~ 300 and controlling welding technique

    通過對其焊接性能的試驗研究，制定了該類鑄鋼件（磨耗板）的補焊工藝：低氫型堿性焊條，預熱與緩冷相結合的工藝措施，嚴格控制層間溫度（ 250 ~ 300 ）及焊接工藝規范，可獲得滿意的修復質量。
  2. Study on cementite graphitization in cast iron at high temperature

    鑄鐵中滲碳體高溫石墨化研究
  3. At the same temperature, the as - cast lead brass has the finer prolongation at the higher velocity

    在溫度相同條件下，在較高的拉伸速度下獲得了大伸長率。
  4. Standard specification for centrifugally cast carbon steel pipe for high - temperature service

    高溫用離心鑄造碳素鋼管的標準規范
  5. Molten steel level in mould of continuous cast process and casting speed can directly effect temperature of molten steel in mould

    摘要結晶器液位和鑄坯拉速可直接影響結晶器內鋼液溫度。
  6. The influences of foundry process and method factors on combination effect was investigated including the influences of gating system design, pouring temperature, atmospheric pressure of mould cavity, thickness of cast - penetrated layer and so on

    作者就澆注系統、澆注溫度、型腔氣壓、鑄滲層厚度等工藝參數對鑄滲效果的影響進行了試驗研究。
  7. There exist two problems for brake rotors made of cast iron : overweight which affects dynamical properties of the train and excessively high temperature on friction surface during braking which deteriorates the mechanical properties of brake rotors

    以往採用的鑄鐵盤存在兩大問題:簧下重量大，影響機車車輛的動力學性能;表面溫度較高，影響制動盤的機械性能。
  8. The effect of compound casting technology and compound modification on the properties of high speed steel roll collar was studied. the results showed that compound high speed steel roll collar with high and even hardness and good bond between outer and inner layers could be gained when the modified colbalt free high speed steel in outer layer and nodular iron inner layer in connection with appropriate rotational speed of centrifugal machine, pertinent pouring interval between two kinds of the melt and moderate pouring temperature as well as surface induction heat treatment were chosen. it is indicated in industrial use that the service life of compound roll collar is higher by 5 times than that of high chromium cast iron collar

    研究了離心復合鑄造工藝和復合變質處理對高速鋼輥環性能的影響，結果表明，選用變質高碳無鈷高速鋼作外層，用球鐵作內層，選擇合適的離心機轉速、兩種金屬熔液澆注間隔時間和澆注溫度，結合採用表面感應熱處理工藝，可獲得硬度高、均勻性好、內外層結合良好的高速鋼復合輥環，用於工業生產其使用壽命比高鉻鑄鐵輥環提高5倍以上。
  9. The sensitivity algorithm is a knowledge of research on the affection of parameters varies to system performance. combination with pressing force and infuse time predicted model, by using sensitivity algorithm, the affection of cast temperature, mould temperature and infuse pressure on infuse time is researched deeply, and the affection of cast temperature, infuse time and infuse pressure on the pressing force in the origination stage of extrusion process. the sensitivity analysis has huge instructing significance to the selection of parameters

    靈敏度演算法是分析參數變化對系統性能影響的一種有效工具，所以本文引入靈敏度演算法，結合壓制力和浸滲時間預測模型，深入研究了澆注溫度、模具溫度和浸滲壓力對浸滲時間的影響關系，以及澆注溫度、模具溫度、浸滲時間和浸滲壓力對擠壓過程起始階段壓制力的影響，對于參數的選取，具有一定的指導意義。
  10. If coreless melting furnace mainly for steel ， alloy steel ， cast iron ， and other ferrous metal materials and stainless steel ， copper ， aluminum ， zinc and other non - ferrous metal materials melting ， melting with high efficiency ， energy - saving ， metal components uniform ， burning less temperature or block ， simple operation ， easy to supporting the advantages of production lines

    中頻無芯熔煉爐主要用於鋼、合金鋼、鑄鐵等黑色金屬材料以及不銹鋼、銅、鋁、鋅等有色金屬材料的熔煉，具有融化效率高、節電、金屬成分均勻、燒損少、溫升塊、操作簡單、易於配套生產線等優點。
  11. Being engaged in welding technique, including the study of repairing high temperature and high pressure cast workpieces, alloy steel parts, big axle parts and so on

    主要從事焊接技術咨詢，其中包括對大型高溫高壓鑄件，耐熱鋼零部件；及大型軸類零件的補焊修復的咨詢及研究。
  12. Centrifugally cast steel pipes for high temperature and high pressure service

    高溫高壓裝置用離心鑄造鋼管
  13. ( 2 ) the stress caused by heat of hydration during construction is mainly distributed in the beams, and girders and stress in slab was smaller ; during service process, the stress caused by difference in temperature in different seasons is mainly distributed in bottom components ; the stress caused by difference of inside and outside temperature is mainly distributed in peripheral components of building ; the stress caused by difference in temperature due to sunlight is mainly distributed in the components exposed to the sun. ( 3 ) the control methods brought forward such as setting the reasonable stripping time reducing cast temperature of concrete setting after - treatment joint inflicting prestress arranging steel for construction requirement and so on are effective and their application may be extended

    在使用期，由季節溫差作用引起的結構內力主要分佈在底層構件上；由內外溫差引起的內力主要分佈在建築物外圍構件上；由日照溫差引起內力主要分佈在向陽面的構件上； （ 3 ）在施工階段，可採取使用導熱性能較好的模板、合理設計拆模時間、降低澆築溫度等措施來減小水化熱引起的結構內力；採用設置后澆帶的措施來減小結構在整體降溫情況下產生的溫度內力。
  14. With the increase of the number of large - span large - area and large - space buildings in cities, temperature cracks of cast - in - place slab with large - area draw more and more public attentions. this problem has become a difficult nut in the engineering practice

    隨著大柱網、大空間結構形式的各種公共建築和工業廠房的不斷涌現，大面積現澆樓蓋結構也得到了日益廣泛的應用，而其裂縫引起的質量問題更是越來越受到各方面的重視，成為實際工程中急需解決的難題。
  15. Temperature and pressure limitations for piping systems manufactured from 20 % nickel 2 % chromium spheroidal graphite austenitic cast iron '

    鎳和鉻奧氏體球墨合金鑄鐵制管道系統的壓力和溫度極限
  16. Temperature and pressure limitations for piping systems manufactured from 23 % nickel 4 % manganese spheroidal graphite austenitic cast iron '

    .鎳和錳奧氏體球墨合金鑄鐵制管道系統的壓力和溫極限度
  17. 1 the rolls are made of chilled alloyed cast iron, their working surfaces are of high hardness and wear - resistant. the working temperature of the bored rolls is controllable by steam or cooling water that pass through them thus, to meet the requirements of milling process

    1輥筒用合金冷硬鑄鐵製成工作表面具有較高的硬度，耐磨耐用。輥筒內腔可通如蒸汽或冷卻水以便調節輥筒的工作溫度，以滿足煉膠工藝的要求。
  18. Frequent temperature fluctuations expose the valve to excessive stresses which cause surface cracks in the body bores of cast steel valves

    頻繁的溫度波動使閥門承受著過度的壓力，這種壓力容易造成鑄鋼閥門閥體孔內部表面裂縫。
  19. The phase composition and microstructure of sm - fe - zr alloy with different amount of zr are analyzed and the effect of zr content on the microstructure of as - cast sm - fe - zr alloy is studied. the results indicate that microstructure of as - cast sm - fe - zr alloy is improved obviously with 1. 0at % zr added, and that the long - time high temperature homogenization is unnecessary for the alloys with this microstructure. by this way, the purpose of the research to decrease the cost of preparation and optimize process is achieved

    分析了不同zr含量的sm - fe - zr合金的相組成和微結構，研究了zr含量對鑄態組織的影響，結果表明，添加1 . 0at的zr可以明顯改善合金的鑄態組織，從而可以避免昂長的高溫均勻化退火過程，取得了降低製造成本和優化工藝的效果。
  20. The influence of different structural parameters ( diameter and shape of cooling water pipes, distance between cooling water pipes, thickness of stave and cast in bricks ) on the steady state highest temperature and thermal stress of cooling stave was numerically simulated and analyzed by engineering software ansys

    摘要採用有限元分析軟體ansys計算並分析了不同結構參數（冷卻水管形狀和直徑、冷卻水管間距、冷卻壁鑲磚厚度及冷卻壁壁體厚度）對冷卻壁最高溫度及熱應力分佈的影響。
分享友人
分享到 Line

分享到臉書