common simulation 中文意思是什麼

common simulation 解釋
普通模擬
  • common : adj 1 共通的，共同的，共有的。2 公眾的；公共的。3 普通的，通常的，尋常的，平常的。4 平凡的，通俗...
  • simulation : n. 假裝；模擬；裝病，裝瘋；【生物學】擬態，擬色。
  1. A common basic structure used in the simulation is an insulating chunnel

    在設計結構中，其基本結構是一倒置的內壁塗有絕緣材料的漏斗狀通道。
  2. At first, in the process of experiments, it were measured that dry plate pressures drop and point pressures in the flow fields around the single fixed - valve and double fixed - valves under different velocities by using of pitot tube. after that point pressure was transformed to point velocity, two dimensions flow plane of flow fields around fixed - valve were plotted to observe the difference between of the fixed - valve tray with fold edges and the common rectangular fixed - valve tray on the distributions of flow fields and pressures, to provide comparisons and refer - rence for cfd simulation

    在實驗中，利用測速管等儀器對在不同速度下的單閥和雙閥固定閥周圍的流場進行了點壓力測量，然後把點壓力轉化為點速度后繪出固定閥周圍流場的二維流線圖，同時測定了塔板的干板壓降，來考察新型固定閥帶折邊后對流場分佈和壓降的影響，為隨后的數值模擬提供對比和依據。
  3. This paper adopts linear interpolation to deal with data of wind tunnel experiment for sample uav and realizes modeling and simulation of the sample uav with c language in common aerodynamics and moment coefficient

    本文採用線性插值處理樣例無人機風洞試驗數據，採用正常情況下的氣動力及力矩系數數學模型，並用c語言實現樣例無人機建模與模擬。
  4. This paper researches the basic statistical rule of oil - gas dynamic system from the systematic theory, combining with the common characteristic and structure characteristic of oil - gas dynamic system, taking the design requirement of oil field development programming into consideration, by using of functional simulation principle ( including nn method, differential simulation method ) and historical data of oil field, establishes the in - out conjunctional relationship of dynamic index of oil field development, and researches the two level index prediction of development dynamic with both oil field and oil production plant on the basis of the in - out conjunctional relationship. furthermore, this paper analyzes the " decision - making variable ", " object " and " restriction terms " by the optimization theory and set up several optimal models which compose the oil field development programming, it is following : optimization model of the production composing ( solving the optimal composing of each subentry production and cor responding cost, workload, including the onshore thin oil production, the heavy oil thermal process production, tertiary oil recovery production, and the offshore production ) ; optimization model of measure production structure ( determining the optimal composing of each measure production and measure workload, which is composed of fracture, acidulation, capital repair and so on ) ; optimization model of the production distraction ( optimal distribution of the whole oil field production to each oil production plant ) and the integrated development programming model of oil field

    本文從系統理論出發研究油氣動態系統基本統計規律，結合油氣動態系統的一般特點，結構特點，兼顧油田開發規劃設計的要求，利用功能模擬原理（含神經網路方法、微分模擬方法） ，依據油田歷史數據，建立了油田開發動態指標間的輸入輸出關聯關系，並在此輸入輸出關聯關系的基礎上研究了油田及採油廠兩級的開發動態指標預測，同時利用最優化原理，在分析「決策變量」 、 「目標」及「約束條件」的基礎上建立了多個構成油田開發規劃的「優化模型」 ，這些優化模型包括：產量構成優化模型（解決陸上稀油產量、稠油熱采產量、三次採油產量、海上產量及對應的成本、工作量的最優構成問題） ；措施產量結構優化模型（解決壓裂、酸化、大修等各項措施產量及措施工作量的最優構成問題） ；產量分配優化模型（將油田的產量最優地分配到各採油廠）以及油田綜合開發規劃模型。
  5. Study of common simulation system of civil traffic in city

    城市交通通用模擬系統的研究
  6. The wrf ( v1. 2 ) system is used to simulate the landing process of winnie in 1997, and results show that the track, landing time, and landing position of winnie calculated using the common land model ( clm ) and the initial field of 0800 bst on 18th august 1997 are closer to the reality ( fig. 4. 3 ) than those in the other 7 experiments, indicating the better forecast and simulation capability of the wrf model than the others

    應用wrfv1 . 2版系統對1997年登陸臺風winnie進行了數值預報模擬研究，結果表明，用通用陸面模式（ clm ）對8月18日08時初始場計算得到的winnie移動路徑、登陸時間及地點（見圖4 . 3 ）比其它七個試驗的計算結果更接近實際情況。表明wrf模式有較強的預報模擬能力。
  7. Study on dynamic simulation system of common mechanism

    常用機構計算機動態模擬系統
  8. An idea, simulating the fuzzy model by establishing the fuzzy model and fuzzy control rule of the controlled object is proposed. generally, it is difficult to acquire the accurate mathematical description of the controlled object. a dynamic modulating factor is introduced in the designing of the fuzzy controller so as to improve the precision of the fuzzy control. and a more convenient defuzzify calculation method is adopted. the cart and the single inverted pendulum are taken so as to illustrate the simulation result. in addition, the detailed qualitative analysis of the fuzzy system is achieved. a kind of common method of qualitative analysis is proposed. it can be used to analyse the fuzzy system and describe the behavior of the system state precisely in the phase plane. the simulating results illustrated the method is feasible and available

    提出了在難以精確描述控制對象數學模型的情況下，通過建立控制對象的模糊模型來確定系統的模糊控制規則，並對模糊系統進行模擬分析的思想.利用連續系統定性分析的思想，提出一種對模糊系統進行定性分析的可行方法，在相平面內較為準確地刻畫模糊系統的動態行為.在模糊控制器的設計中，引入動態調節因子來提高模糊控制的精度，並採用了一種便於實際運算操作的解模糊運算方法.在一種簡單的控制對象情況下進行了具體的模擬計算，得到較理想的控制效果.此外對具有精確數學模型的一級倒立擺系統進行此種模糊控制，亦取得很好的模擬結果
  9. Accurate simulation of switch circuit is needed in pin switch design, while limited by assembling techniques, serial resonance and channel inter - coupling exist in the common joint that bring a lot of difficulties for simulation. 2 - dementions simulation software can not establish accurate circuit mode for pin diode switch which gives simulation error, and it costs much more time with 3 - dementation simulation software, which is not applicable in practice for pin switch design

    Pin開關的設計中需要對開關電路進行準確模擬，然而高頻、寬帶、多擲pin開關受裝配工藝的限制，開關公共結點附近存在著串聯諧振和相互耦合，給pin開關的準確模擬帶來了困難:二維模擬軟體很難對電路進行準確建模，模擬誤差較大;三維模擬軟體耗時過長，難以在實際設計中應用。
  10. In this paper, according to the need of developing new style column, new style fixed - valve tray - rectangular fixed - valve tray with fold edges and common rectangular fixed - valve tray were studied from experiments and cfd simulation

    本文針對開發塔設備新類型的需要，從實驗和cfd模擬兩方面對新型的固定閥塔板-帶折邊矩形固定閥塔板以及普通的矩形固定閥塔板進行了研究。
  11. An analytical mosfet threshold voltage shift model due to radiation in the low - dose range has been developed for circuit simulations. experimental data in the literature shows that the model predictions are in good agreement. it is simple in functional form and hence computationally efficient. it can be used as a basic circuit simulation tool for analysing mosfet exposed to a nuclear environment up to about 1mrad. in accordance with common believe, radiation induced absolute change of threshold voltage was found to be larger in irradiated pmos devices. however, if the radiation sensitivity is defined in the way we did it, the results indicated nmos rather than pmos devices are more sensitive, especially at low doses. this is important from the standpoint of their possible application in dosimetry

    該模型物理意義明確，參數提取方便，適合於低輻照總劑量條件下的mos器件與電路的模擬。並進一步討論了mosfet的輻照敏感性。結果表明，盡管pmos較之nmos因輻照引起的閾值電壓漂移的絕對量更大，但從mosfet閾值電壓漂移量的擺幅這一角度來看，在低劑量輻照條件下nmos較之pmos顯得對輻照更為敏感。
  12. Hi this paper, a common air conditioner simulation program which has been verified by experiments results before has been improved. comparing the calculation and the experiment results at the same state indicates the accuracy and reliability of the improved mathematics model

    本文首先對經過了實驗驗證的定頻空調器數學模型進行了改進，用空氣焓差法對樣機進行了實驗，提出了對空調器變頻控制器的設計建議。
  13. Research of vector control system ' s common simulation model

    矢量控制系統通用俯真模型的研究
  14. According to the characters and simulation desire of the distribution center operation system, this article adopts a common simulation language, that is gpss ( general process simulation system ), to simulate

    第二章是對配送中心作業管理系統模擬方法的選擇。根據配送中心作業管理系統的特點和模擬要求，本文採用一種通用模擬語言? ? gpss來進行模擬。
  15. In this paper we dissertate the common structure cross forms and excavating methods of highway double - arc tunnel home and abroad at the first part, and study common simulation methods of tunnel construction afterwards. based on the method of reversing and releasing the stress, and combined with the capacity of simulating continuous construction of ansys programme, we come up with the thought of using the method of applying virtual support force to release the stress step by step to realize the step - by - step release of initial stress during the tunnel construction simulation. with the help of design language of ansys, we develop a command to apply the virtual support force

    探討了應用平面應變模型進行隧道施工過程模擬的常用方法，在「反轉應力釋放法」的基礎上，結合ansys軟體可以模擬連續施工的特點，提出利用「施加虛擬支撐力逐步釋放法」來實現隧道施工過程中地應力隨工序的逐步釋放的思路，並且利用ansys的apdl設計語言，開發出施加虛擬支撐力的命令，實現了施工過程中應力的逐步釋放，從而找到了一種模擬隧道施工過程的好方法。
  16. Study on common simulation system of land traffic amp; transportation

    建立地面交通通用模擬系統的研究
  17. As the principal need of federation observation, the procedure does not confine in any specified federation. it can be used in common simulation application

    且根據聯邦觀測概念的的基本要求，這種處理方式並不僅僅拘泥於某個具體的模擬聯邦的應用，它對於一般的模擬需求都是適用的。
  18. Especially for linear and nonlinear analog circuit fault diagnosis as well as a large scale integrated circuit, there are no generally proper maths model and common simulation program for networks

    故障識別時需要得到最能反映故障分類的本質特徵，提取合理的故障特徵是模擬電路故障診斷的核心問題之一。
  19. Then the author discusses the differences of teaching simulation system and the common simulation system, and introduces several kinds of information technique which may be used in the system, and then the author gives explanation of three important mechanical experiments, followed by some advises to improving these teaching simulation systems

    本文論述了教學模擬系統和普通模擬系統的不同點，介紹了系統可能使用的各種計算機技術。並且詳細地分析了機械專業的三個重要實驗，提出了對這三個實驗進行模擬教學的一些看法。
  20. Through the introducing of common simulation software of hev in world, and takes advisor as an example, show the advantage and disadvantage of working the simulation software in china. the fact point out that we must develop the simulation software of hev suitable for the china ' s actual condition

    接著對當前世界上的常用模擬軟體作了介紹，以advisor為例，說明了國外混合動力模擬軟體在中國使用的優缺點，指出必須開發出適合中國國情的混合動力電動汽車模擬軟體。
分享友人
分享到 Line

分享到臉書