conventional software 中文意思是什麼

conventional software 解釋
常規軟體
  • conventional : adj 1 因襲的，傳統的。2 習用的；平常的，常規的；形式上的。3 約定的，協定的；會議的。n ism 依從俗...
  • software : （電腦的）軟體，軟設備；程序設備；語言設備；程度系統；設計電腦方法；計算程序；程序編排手段；方案；資料圖紙；【航空】軟體〈指乘員、載重及燃料等，不包括機械硬體設備〉。
  1. A slot was cut in the back plate of the double - foil shield to improve the flow field with air diversion method. the flow field and droplets trajectory near the shield are simulated in wind tunnel by fluent software to analyze the wake flow affecting the spray drift. from simulation, the improved shield spray in reducing drift is better than double - foil shield spray and conventional spray in six types of wind velocity

    本文採用導流法在雙圓弧罩蓋上開口，利用fluent模擬分析和比較罩蓋噴霧流場，並模擬該流場下的霧滴運動軌跡來分析霧滴的飄失性，模擬結果表明：結構改進后的罩蓋噴霧流場得到改善，其減少霧滴飄失的效果好於原罩蓋，更優于常規無罩蓋噴霧。
  2. The conventional sphere model of earth and circle model of orbit are discarded, and the ellipsoid model and the ellipse model are selected for further research, which achieves a method to determine the target position through the antenna pointing direction. and the spaceborne sar system design and simulation software is brought forth. this software accomplishes sar system coefficients design for antenna area, pulse repetition frequency, signal bandwidth, downlink data rate, radar transmitter power and satellite platform yaw steering

    本文從星載雷達的星地幾何關系入手，舍棄傳統星載合成孔徑雷達研究中的球地球模型和圓軌道模型，研究了在地球橢球模型和橢圓軌道模型下由雷達天線確定目標坐標的方法，並在此基礎上研製了星載合成孔徑雷達系統設計與模擬軟體，完成雷達系統天線尺寸、脈沖重復頻率、信號帶寬、雷達信號數據率、雷達發射功率、衛星平臺的偏航牽引等幾個方面的系統參數設計以及雷達多普勒特性、雷達系統模糊、雷達定位及精度的分析，最後完成雷達回波信號的模擬。
  3. In addition, it had founded the database and universal post processing in the software for facilitating user to operate. the cam - designed cad / cam system software can design conventional types of cam, own the advanced curves approximation and complete function, so it should has great practical and theoretical value

    本篇論文從設計的原理、設計的方法和設計的步驟等方面詳細闡述了對各類凸輪的設計過程，並從軟體的整體設計和各組成模塊設計等方面說明了軟體的實現方法，同時通過軟體的使用和操作一章來讓用戶對軟體的操作更加明確。
  4. ( 2 ) respectively by elastic theory analyses and methods of structural mechanics, transverse static analytical equations for flexible pipeline rigid pipeline are established whose outcomes are applied in numerical example to compare those with that by finite element method. ( 3 ) considering interaction of filled soil, pipeline and foundation, with an eye to non - linear soil model, in view of the initial geo - stress field and the effects of interface between soil and pipeline, and by finite element method the calculational model and method are built for transverse stress in pipeline. then, by the great finite element analytical software ansys, those outcomes are applied in calculation example of positive buried pipe to educe the distribution of circumjacent soil pressure and stresses on cross section and to compare it with that calculated by conventional ways before those outcomes are applied in engineering case of positive buried pipe with flexible filled materials to confirm distribution of soil pressures after the measure for reduction and to compare it with measurements. as a result, the model set up in this paper is proved to be applicable after all above - mentioned analyses

    本文基於彈性理論和有限元原理與方法，分析了上埋式地下管道橫向力學計算方法和性狀並探討了上埋式地下管道的減荷等問題： （ 1 ）在分析現有幾種典型的管道垂直土壓力計算方法的基礎上，探討了影響垂直土壓力的主要因素以及改進的方法； （ 2 ）分別通過彈性理論分析法和結構力學的方法，建立了地下管道柔性圓環和剛性管涵的橫向靜力計算方程，並應用在算例中，把所得結果和有限元方法所得結果進行對比分析； （ 3 ）考慮填土、管道和基礎的共同作用、土體的非線性特性、初始應力場以及土體和管道的接觸面因素的影響，利用有限元的思路，建立了地下管道橫向力學有限元計算模型和方法，並且採用大型有限元分析軟體ansys ，針對上埋式管道工程算例，得出了管周土壓力以及管道橫截面應力的分佈狀況和規律，並和理論值進行對比；針對施加柔性填料的上埋式管道工程實例，得出了減荷后的土壓力分佈，並和實測值進行了對比。
  5. The training software of conventional motive system in rocket

    某型火箭常規動力系統測試工作過程模擬訓練系統
  6. However, that kind of design method makes develop, debug and maintenance longer and difficult, which also results low systematism. and the linear program will breakdown whenever there is something wrong because of badly disturbance. with the complexity of embedded system software improving, the conventional design methodology will not meet our demands, it is hard to be transplanted from one platform to another

    目前在嵌入式實時系統開發中，還較多的採用傳統的單線程的開發方式，這種開發方式使開發、調試和維護過程都顯得冗長和復雜，系統化的程度也比較低，且這種線性程序，遇到強干擾時，程序在任何一處出錯都會引起系統崩潰；並且隨著嵌入式系統軟體復雜性的增加，這種傳統的軟體開發模式將不能滿足要求，可移植性差，顯然它已不是一個很正規化的系統開發方案。
  7. ( 4 ) the graph compiler of power system single - line graph is independently developed. employing standard modeling technique uml and multimode, presenting the concept of joint and leg to describe the relationship of graphs and realizing the auto - routing of devices except bus, the compiling of graph objects, including bus, transformer and line, is more convenient than conventional software

    （ 4 ）獨立設計開發了電力系統主結線網路的圖形編輯平臺，在設計中採用了標準化建模技術uml和多態技術，並創建了關節和腿的概念來描述圖形之間的關聯關系，且實現了非母線設備的自動布線功能，使主結線對象（母線、線路和變壓器等）的編輯相對傳統軟體更加方便、快捷。
  8. The patients were evaluated with harris hip score and radiographic analysis. results : dr - based surgical planning software had better proximal fit on postoperative x rays than the conventional method. in the clinical results the harris hip score using both methods was not significantly different between patients, 94. 5 % of patients had excellent or good results evaluated by harris hip scores post - operation

    再利用開發的基於數字x線股骨假體置換術前計劃軟體對11位患者共12例髖術前預估后進行全髖關節置換術，術后進行平均9個月的隨訪，上述兩組均通過harris評分及x線片評價臨床效果。
  9. Research of integrating conventional simulation software with hla

    的傳統模擬軟體集成技術研究
  10. But all designed software before in our country still have some weakness, for example, the conventional type of cam counld be projected by these software is very little, and used approximation by lines to curves of cam which have bigger error and more nodal points that result in chattering of principal axis. in furthermore, this software of designing cam in fact only has the function of cad. if you want to simulate and work over the designed cam in that software, you will find that you have to export it to other cad / cam system software ( e

    隨著數控加工在我國的深入開展，真正實現我國的凸輪cad cam就顯得非常必要，但以往的凸輪設計軟體還存在許多不足，如可設計的凸輪類型較少，大多集中於平面凸輪；且採用誤差較大、節點數過密的直線逼近法生成凸輪工作曲線，造成計算時間長，且加工中產生較大振動；同時這些凸輪設計軟體基本上只具有cad功能，如果想將設計好的凸輪進行模擬和加工，就必須將圖形輸出到其它通用cad cam軟體（如mastercam等）中，因此這些軟體在實際應用中總不盡人意。
  11. This thesis is composed of seven chapters : the first chapter is the introduction of this thesis. it is summary of the background, the technology method, and the significance of research ; in the second chapter, the writer propounded the new method for speed regulating to realize the mainland method. the introduction of the foundation of fuzzy control is the content of the third chapter. the main content of the fourth chapter is the theoretical foundation of fuzzy control ; in the fifth chapter, the writer propounded a kind of self - adaptive fuzzy controller according to the defnult of the conventional fuzzy controller and its properties and structure are alse illustrated at the same time ; the main content of the sixth chapter is the design of sa fuzzy controller ; the seventh chapter is the summary of hardware and software of vfsr for controlling system

    本論文共分七章：第一章是緒論，簡介課題研究的背景、技術方法及研究意義；第二章簡單分析了傳統pid調速技術存在的問題，提出新的調速實現方案；第三章給出了模糊集合論中的一些基本概念、運算定理等；第四章主要介紹模糊控制的工作原理，並指出常規模糊控制的缺陷及其多種改進方案；在第五章中，作者根據常規模糊控制器的不足，設計了自適應模糊控制器，並闡述了它的性能結構和工作原理；第六章的主要內容是自適應模糊控制器的設計；第七章是船模純粹自航試驗調速系統的實現。
  12. Genetic algorithm is applied to the software reliability allocation. also, the allocation technique based on genetic algorithm is compared with the conventional allocation techniques

    本論文將遺傳演算法應用於軟體可靠性分配中，對基於遺傳演算法的可靠性分配技術和傳統的可靠性分配方法進行了比較。
  13. This paper discusses the design and implementation of remote management software based on telnet protocol of network access server. the software realize whole telnet protocol, establish and maintain a group of communication access, so that remote manager or maintenance man can manage and configure the nas. besides, improve on fsm - conventional method realizing network protocol - is presented

    本文給出了基於telnet協議的接入服務器遠程管理軟體的設計思想和實現方法，該軟體實現了完整的telnet協議，建立並且維護一組與接入服務器的通信鏈路，使得遠程以tlenet協議登錄的用戶可以對接入服務器設備進行管理和監控。
  14. From interdisciplinary view of structure dynamic and control, based on engineering background, considering defect and deficiency of conventional design method, structure / control integrated design, that is, system synthesis is discussed in this paper. matlab and i - deas based general simulation system of vibration control of piezoelectric laminated shell and its software architecture is also presented, by which, a system prototype environment - rsde, has been developed in order to provide high efficient ways and means for active vibration control. the systematical researches on the satisfactory vibration control of piezoelectric laminated shell are presented in this dissertation

    本文基於結構動力學與控制理論交叉的獨特視角，結合工程實際背景，針對常規設計方法中的不足，就結構控制一體化設計，即系統設計方法，闡述了自己的見解；並採用此方法，提出了基於matlab和i - deas平臺的壓電層合殼振動控制的通用模擬系統設計方案，並根據這一方案編制了軟體模擬環境? rsde ，為壓電層合殼的振動主動控制設計，提供了高效率的技術開發手段。
  15. The software can design many conventional type of cam, concluding cam - plate with middle follower, cam - plate with offset follower, cylindrical cam, dividing cylindrical cam, and cylindrical cam with space curve, etc. in forming working curves of cam - plate, used the approximation by arcs which can lessen the nodal points on curves of cam uttermostly in same error, so it reduce the computation time and relieve the chattering of principal axis. in former times, to cam mechanism, the follower only has one direction motion

    本軟體可以設計的凸輪類型較多，包括了對心移動從動件盤形凸輪、偏置移動從動件盤形凸輪、圓柱凸輪、圓柱分度凸輪和空間曲線柱形凸輪等，其中對盤形凸輪的工作曲線採用了難度較大的圓弧逼近演算法和等誤差演算法，這樣就可以在相同的允許誤差內最大限度的減少生成曲線的節點數，減少計算時間，同時可以大大減輕加工中的振動現象。
  16. Compared with conventional methods, the method applied in this research is simpler, exacter and has a better all - purpose ability. the software designed during the study can do kinematics simulation optimized design of the double - wishbone suspension system

    與傳統的方法相比，運用多體系統運動學對汽車雙橫臂獨立懸架進行運動學分析，具有簡明、精度高和通用好的特點。
  17. This thought is better than the conventional software thought ; 2. the slrcp construction of no. 9 steel - tube dam monolith of three - gorges hydropower station left workshop is studied

    對左廠9 #鋼管壩段壩後背管進行了混凝土施工模擬計算，得到了壩後背管混凝土施工期典型的溫度場與應力場。
  18. The first part, this paper discuss the basic ideology of groupware, and we talk about the characteristics of groupware in erp software, then we transform the conventional software designing process into a new groupware building process, and the result of transforming enlarge the least cell of software making to the groupware cell

    文章首先探討了組件技術的基本思想，並詳細分析了erp軟體中運用組件的一般特點，將軟體構建的過程映射為組件建立的過程，使傳統的軟體製作的最小單元擴大為組件。
  19. In the power - amplifying grade of drive circuit, the system adopts a method of high / low voltage drive that is different to the conventional drivers. so the high frequency performance of the system is improved and the load support capability of step motor is increased. by the software method, the control principle of the optimum increasing / decreasing frequency of step motor is achieved

    在驅動電路的功放級採用了一種不同於傳統驅動器的高低壓驅動方式，改善了系統的高頻性能，增加了步進電機帶負載能力，以軟體方法實現步進電機最佳升降控制規律，實現了步進電機的快速啟、停控制。
  20. In this thesis, a kind of software method is researched to realize the functions of fast acquisition, tracking and demodulation of pcm - cdma - bpsk intermediate frequency signals. conventional research on spread spectrum signals is in the case of ideal conditions, such as low code rate, narrow dynamic range, narrow frequency - changing range and so on

    本論文將介紹一種軟體模擬硬體的方法來實現pcm - cdma - bpsk中頻信號的快捕、跟蹤和解調。關于擴頻信號的傳統的研究是在理想的條件下，比如低碼率、窄動態范圍、窄頻率變化范圍等等。
分享友人
分享到 Line

分享到臉書