design requirement 中文意思是什麼

design requirement 解釋
設計上的規定
  • design : vt 1 計劃，企圖，立意要…。2 指定，預定；留給，留著。3 設計，草擬，擬定，籌劃；起草，畫草圖，打（...
  • requirement : n. 1. 要求，需要。2. 要求物，必需品；需要量；必要條件，資格 （for）。
  1. Simultaneously, combine with his own work experience, the author gets an advanced detail and general design steps. and then illustrates an actual engineering which is designed with the article ’ s recommendatory method and steps. by combining with the test results, it is proved that the ground treatment result obtains the design requirement and the commendatory method is right, which is able to provide reference value to the engineering

    本文首先對加筋土的研究現狀做了詳細的介紹和分析，在此基礎之上，對加筋土地基設計方法做了一定的研究，對地基承載力力設計方法做了對比分析，選擇極限分析法作為本文的推薦方法，並結合作者自身的工作經驗，提出了加筋土地基詳細和全面的設計步驟，然後用一個加筋土地基實際工程為例，採用本文推薦的設計方法和步驟進行設計，並通過現場試驗結果，證明該地基處理達到設計要求，也證明了推薦方法計算的準確性，這對廣大工程師在實際工程操作中有較高的參考價值。
  2. An optimization example showed that the method was valid and satisfied the design requirement of some related structure and performance parameters on the conditions of minimum volume, concordant gears and rotors cavity structure

    實例分析證明，該方法可以在保證泵體積小、齒輪腔與轉子腔結構協調的情況下，滿足有關結構和性能參數的設計要求。
  3. So it is worth to researching the problem that how to rationally distribute generatrix, vacuum interrupter and other electric organs to make the better insulation cooperation and the design requirement with the highly reliable insulation property so that we can assure that the metalclad withdraw switchgear run safely in the distribution system and have smaller installation space

    因此如何能夠合理的配置母線、真空斷路器及其它電器元件，得到較佳的絕緣配合和設計要求，具有高度可靠的絕緣性能，保證中置櫃在配電系統中安全運行，並且有較小的安裝空間，是一個值得研究的問題。
  4. First, according to the design requirement of hydraulic valve, the particular parameter of the valve is put forward, and the navier - stokes equation of the two - dimension impressible viscid fluid in the hydraulic valve is set up

    本文選擇液壓閥中的溢流閥為具體研究對象。根據溢流閥的性能要求，確定了閥的具體參數，完成了溢流閥的設計。
  5. The design requirement for human body templet in sitting

    坐姿人體模板功能設計要求
  6. This paper researches the basic statistical rule of oil - gas dynamic system from the systematic theory, combining with the common characteristic and structure characteristic of oil - gas dynamic system, taking the design requirement of oil field development programming into consideration, by using of functional simulation principle ( including nn method, differential simulation method ) and historical data of oil field, establishes the in - out conjunctional relationship of dynamic index of oil field development, and researches the two level index prediction of development dynamic with both oil field and oil production plant on the basis of the in - out conjunctional relationship. furthermore, this paper analyzes the " decision - making variable ", " object " and " restriction terms " by the optimization theory and set up several optimal models which compose the oil field development programming, it is following : optimization model of the production composing ( solving the optimal composing of each subentry production and cor responding cost, workload, including the onshore thin oil production, the heavy oil thermal process production, tertiary oil recovery production, and the offshore production ) ; optimization model of measure production structure ( determining the optimal composing of each measure production and measure workload, which is composed of fracture, acidulation, capital repair and so on ) ; optimization model of the production distraction ( optimal distribution of the whole oil field production to each oil production plant ) and the integrated development programming model of oil field

    本文從系統理論出發研究油氣動態系統基本統計規律，結合油氣動態系統的一般特點，結構特點，兼顧油田開發規劃設計的要求，利用功能模擬原理（含神經網路方法、微分模擬方法） ，依據油田歷史數據，建立了油田開發動態指標間的輸入輸出關聯關系，並在此輸入輸出關聯關系的基礎上研究了油田及採油廠兩級的開發動態指標預測，同時利用最優化原理，在分析「決策變量」 、 「目標」及「約束條件」的基礎上建立了多個構成油田開發規劃的「優化模型」 ，這些優化模型包括：產量構成優化模型（解決陸上稀油產量、稠油熱采產量、三次採油產量、海上產量及對應的成本、工作量的最優構成問題） ；措施產量結構優化模型（解決壓裂、酸化、大修等各項措施產量及措施工作量的最優構成問題） ；產量分配優化模型（將油田的產量最優地分配到各採油廠）以及油田綜合開發規劃模型。
  7. The experiment demonstrates that the operation precision of a decubital human body and the response measurement instrument have satisfied the design requirement

    對照試驗表明：臥姿人體振動響應測量儀的運算精度達到了設計要求。
  8. This paper has mainly made a research on the aerodynamic configuration design of " w " tailless aircraft and the design idea has been presented here. according to the configuration design requirement of certain uav, aerodynamic configuration design has been carried out and two configuration projects are given out at last : forward - swept wing tailless configuration and " w " tailless configuration. the longitudinal and lateral aerodynamic characteristics are obtained by using two aided soft : ug to build up geometrical models and mgaero to calculate flow field

    本文研究了「 w 」型無尾布局的氣動外形設計，闡述了該布局的氣動設計思想，根據型無人機的總體設計技術指標，進行了氣動外形設計，提出了兩種氣動布局方案：前掠翼無尾氣動布局和「 w 」型無尾氣動布局，利用ug建模軟體和mgaero氣動分析計算軟體計算了兩種布局的縱、橫向氣動性能，分析了前掠翼前緣掠角和翼身融合對氣動性能的影響，計算結果表明， 「 w 」型氣動布局的設計思想是正確的，所設計的「 w 」型無尾氣動布局方案的氣動性能優越，超過了總體設計技術指標。
  9. The results of the experiments indicate that the main performance of the ladar prototype matches the design requirement theoretically. the ladar prototype has many advantages, such as high imaging speed, high image resolution, high ranging precision and high quality intensity image, which can be obtained simultaneously

    實驗結果表明，所研製的成像激光雷達的主要性能指標與理論設計基本一致，具有成像速率高、圖像解析度高、測距精度高以及可同時獲得高精度強度圖像等優點。
  10. The latest constructing machine and the newest technology were adopted to ensure that the borehole is perpendicular to the rock face of roof and that the depth of borehole and the torsional moment of the anchoring bolt meet the design requirement

    採用最新錨桿施工機具及工藝，保證鉆孔垂直於頂板巖面，孔深及錨桿扭矩滿足新型機械錨桿的設計要求。
  11. On the background of selecting an optimal combination of elastic pads " height between the two adjacent cylinders, which carry out the design requirement of combinative cylinders assembled structure, in this dissertation, the optimal design model is established ground on geometrical and mechanical model of the combinative cylinders assembled structure. the algorithm that integrates multi - objective ' s decision - making method with minimal distance between two points in euclid ' s space into the modified genetic algorithm to solute the optimal model is presented

    本文以選取層間彈性墊層厚度實現組合圓筒裱糊裝配結構的設計要求為研究背景，依據組合圓筒裱糊裝配結構的幾何模型與力學模型，建立組合圓筒裱糊裝配結構的優化模型，提出改進遺傳演算法與歐幾里德空間最短距離準則的多目標決策方法相結合的優化演算法。
  12. In the thesis, the design method of the diagonal flow fan impeller has detailedly researched different from the previous means borrowing and extending design methods for axial flow or centrifugal type, a complete design method has presented on the basis of quasi - three dimensional design idea. the course is mainly composed of such steps as meridional surface design, inverse problem computation in meridional surface, blade shaping on stream surface, and verifying through three dimensional computation, until the design requirement is met at last

    不同於以往的軸流式或離心式延長設計方法或經驗方法，本文按照準三元設計的思路給出了一套完整的設計方法，即子午面設計?子午面反問題計算?斜流流面上葉片造型?三維計算驗證優化，直至符合設計目標。
  13. Our plastic spirals are made of quality plastic filaments to meet the top quality requirements. a wide range of colours is available to match your any design requirement

    鴻圖採用優質膠線，製造出質量上乘的膠線圈，確保能滿足客戶的嚴格要求。而豐富多姿的顏色選擇，更能迎合不同設計的需要。
  14. Abstract : an imidazole - catalyzed acylation method of phthalic anhydride is applied to the determination of hydroxyl values of reinforcing agent is211. the analytical error is 5. 0 10 - 3. the relative standard deviation of the method is less than 0. 04 and its coefficient of variation is not more than 5. 0 10 - 3. hydroxyl values determined in different batch samples meet the design requirement completely. this method is rapid and simple, it is adaptable to conventional analysis

    文摘:以咪唑催化鄰苯二甲酸酐酰化的方法測定增強劑is211的羥值，準確度高，分析誤差為5 . 0 10 - 3 ；方法精密度好，標準偏差小於0 . 4 ，變異系數不大於5 . 0 10 - 3 ，測定不同批號試樣的羥值完全符合商標值，方法快速、簡便，適用於常規分析。
  15. The exactment and stability of current and temperature for the instrument is achieved the aim and meet the design requirement

    驅動電流精度和溫度穩定度都達到了預定的目標，滿足了設計要求。
  16. Therefore, in this paper the multi - objective optimization design of aerodynamic and stealthy configuration for the fighter is discussed according to the geometrical characteristics of the advanced tactical fighter. the work is performed as follows : 1 according to the different design requirement in subsonic and supersonic state, with the multi - objective optimization method, the aerodynamic configuration optimization method for different design requirements has been obtained

    基於以上考慮，本文從研究氣動隱身多目標優化問題的角度出發，針對先進戰斗機的外形設計特點，完成了以下工作： 1 、針對現代戰斗機亞、超音速的不同設計要求，利用多目標優化設計方法建立了可進行滿足不同設計要求的氣動外形優化設計方法。
  17. In step of conceptual design, requirement analysis and actor analysis are discussed to analyze erp system using case diagrams and sequence diagrams. in step of logical design, database models and package diagrams are presented in definition of object class, user interface and object class diagrams. in step of physical design, design planning, deployment realization and technology environment of erp system are introduced

    在概念設計階段，重點探討需求分析和角色分析，並採用用例視圖和順序圖來分析erp系統；在邏輯設計階段，充分利用定義對象類、定義用戶介面、定義對象類圖等方法建立erp系統數據庫模型和包圖；在物理設計階段，重點探討系統的設計規劃、部署實現及技術平臺來實現erp系統。
  18. Mixture mixing : install and debug the mixing equipment before construction, take the trial mix according to the mixture ratio, and find out the turning on location of every hopper strobe as well as the relation among material flow of every kind, draw up the curve, and if there is adjustment because of factors like material batch, difference of moisture content and so on, it need to be confirmed by the laboratory so as to ensure the mixture ratio of construction meet the design requirement

    混合料拌和：施工前首先安裝、調試好拌和設備，根據確定的配合比進行試拌，找出各料斗閘門開啟位置與各種材料流量的關系，並繪製成曲線，如因材料批次、含水量不同等因素而調整，須由試驗室確定，以確保施工配合比符合設計要求。
  19. Preparation for construction : the surface of the under layer should be even and firm, and in accordance with the design requirement, without loose material and flaccid site, and need to reroll 2 3 times within full - width range of the subgrade with vibrating roller before the construction, as well as test the compaction and defecting, to check whether there is unqualified point in the soil base

    施工準備：施工前下承層表面要平整、堅實，符合設計要求，無鬆散材料和軟弱地點，施工前要用振動壓路機在路基全寬范圍內復壓2 3遍，同時進行壓實度及彎沉檢驗，檢查土基中是否有不合格點。
  20. Heat mirror insulating glass may use spectral selective film at various visible light transmittance, to satisfy different design requirement of natural lighting and solar heat rejection

    熱鏡中空玻璃產品可以運用各種可見光透過率的光譜選擇性反射薄膜，以滿足不同的採光和陽光遮蔽設計要求。
分享友人
分享到 Line

分享到臉書