finite control 中文意思是什麼

finite control 解釋
有限控制器
  • finite : adj. 有限的；【語法】限定的；【數學】有窮的，有盡的。n. 〈the finite〉 有限（性）； 〈集合詞〉有限物。adv. -ly ,-ness n.
  • control : n 1 支配，管理，管制，統制，控制；監督。2 抑制（力）；壓制，節制，拘束；【農業】防治。3 檢查；核...
  1. In addition, active constrained layer damping ( acld ) has attracted scholar ' s interests because it has the advantages of passive control and active control. the mechanism of vibration control of acld and the models of how to deal with the viscid - electric material are introduced. the finite element model of acld with ghm model is established in this paper

    此外，主動層阻尼結構（ acld ）由於兼有被動控制和主動控制兩者之優點也引起了國內外學者的興趣，本文給出了主動層阻尼結構（約束層採用壓電材料）抑振的工作機理，介紹了處理粘彈性層（ vem ）的幾種模型，並採用ghm模型建立了主動層阻尼結構的有限元模型。
  2. This paper addresses time - invariant gait planning and finite - time nonlinear control strategy for a five - link, four - actuator planar biped robot to realize dynamic walking

    摘要以五桿四驅動的平面雙足步行機器人為對象，研究了其動態步行的時不變步態規劃和限定時間的非線性控制策略。
  3. The numerical simulation equations of the border curves in term of and as well as the matching rules and the frequency dependence of microwave electromagnetic parameters of a broad - band homogeneous absorbing coating with a finite value of reflection loss are available. these results pointed out the direction to develop rams ". according to the radar - absorbing model, the optimized design of rams with thin - layer, light - weight, broadband and strong - absorbing is available by the simple genetic algorithms, which can effectively conduct the research work of rams to the detail. small but completely, the electromagnetic parameter ' s databases of rams that based on actual microwave absorbers have been set up, the object function has been constructed which conform to the involved goals, the adaptive coding measure is taken which extends the coding length dynamically adapting to the condition of the number of actual absorbers or the precision of thickness and absorber - volume - percentage, the decoding technique is initiated which satisfies light - weight and strong - absorbing as well as thin - layer and broadband by adopting of tracing variable restricting conditions dynamically to control total thickness. when decoding, the variable restricting conditions of thickness are dynamically traced, so gain the radar absorbing coatings of light - weight multiple - layer single - ingredient. similary, of thickness and absorber - volume - percentage, of light - weight multiple - layer multiple - ingredient. also, the rams ' demand to radar - absorb performance as frequency is met making use of the penalty function

    作為遺傳演算法的具體實施：根據本實驗室近來研製的吸波材料，建立了吸波材料的相關數據庫；構造了能真實體現「薄、輕、寬、強」優化目標的目標函數；根據材料的實際數量以及塗層厚度精度要求、吸收劑體積分數精度要求，建立了能動態擴展相應碼長的自適應編碼方法；首創了通過動態跟蹤變量的約束條件來控制塗層總厚度的解碼技術，以此實現了在不弱化寬頻、高強的吸波性能目標的同時，兼顧到薄層、輕質的使用性能要求；在解碼時通過動態跟蹤厚度變量的約束條件，實現了多層單組分吸波塗層對重量輕的要求；通過動態跟蹤厚度變量的約束條件和吸收劑體積分數的約束條件，實現了多層多組分吸波塗層對重量輕的要求；使用權重系數變化法，實現了吸波塗層的分頻段吸波性能要求。
  4. Some related techniques and applications on supply chain are described. through studying the order - decomposing process simulation, this dissertation defines the two agent classes : coordination & resource agent, maps the order - decomposing process into a real - time control process formed by a group of agents, proposes finite state machine as a kind of ideal modeling approach used to analyze the real - time control process, describes the conversation rules of agent conversation classes, identifies agents & conversation rules and develops the conversation models by using the framework provided by jafmas, jdk1. 1 integrated development environment & java. according to the structural characteristics, this dissertation transforms the optimization of series supply chain design into multi - stage decision - making problem and develops an optimization model for it

    在對國內外供需鏈研究與應用進行大量調研分析的基礎上，本文給出了供需鏈的定義；闡述了供需鏈管理范疇的內涵、外延及其管理目標；綜述了供需鏈研究的現狀；在對訂單處理流程分析的基礎上，定義了兩種代理類：協調代理和資源代理，創見性地把訂單分解?匹配過程映射為一個由多個代理組成的實時控制過程；針對實時控制過程瞬時狀態難以描述的特點，本文首次把有限狀態機fsm應用到訂單分解?匹配過程中，用以描述代理會話類的會話規則；在jafmas平臺上，利用jdk1 . 1集成開發環境以及面向對象編程語言java設計了jafmas的面向對象代理模型，實現了代理會話規則的有限狀態機模型。
  5. In this paper, at the cut - in spot of beam active vibration control and use the pzt material as the drive component, the main research works can be summarized as follows : 1 ) using the finite element theory, a general finite element formulation of piezoelectric media is derived, the direct and converse piezoelectric effects are considered in the formulation

    本文從梁的振動主動控制研究為切入點，利用了pzt材料作為驅動元件，作了如下幾個方面的研究： 1 ）利用有限元理論，考慮壓電材料的正、逆壓電效應的影響，導出了機電耦合壓電元件的有限元方程。
  6. The finite element resolution and simulation of heat transfer daring control cooling after bars rolling

    螺紋鋼筋控冷時傳熱行為的有限元解析與模擬
  7. The result can be used in control problems whether the time interval is finite or infinite, the control set is bounded or unbounded, and also for systems with a weak differentiable function, i. e., the function f is only strong continuously g - differentiable but not f - differentiable. so, th 6. 2. 7 is a uniform theory of optimal control, and it has wide - ranging applications

    可以看到，我們的結11摘要果可用於有限時域和無限時域、有界控制和無界控制、並且對系統中函數f的可微性要求也有較大的減弱? f對狀態變量x可以是僅有強連續的g一導數、不要求為f一可微。
  8. According to the shear - type floor model of frame structure, a basic control equation is constructed to analyze the nonlinear seismic responses of structure equipped with edd - bracing system. subsequently the dynamical finite element analysis are carried on to obtain the seismic response of a twelve - floor r. c frame with the three edd - bracing system under minute earthquake and disastrous earthquake, and the conclusions provide useful references for practical earthquake - resistant design

    基於框架結構剪切型層模型，建立了耗能阻尼器對建築結構非線性地震反應的基本控制方程，由此進行了某十二層鋼筋混凝土框架結構設置三種耗能阻尼器在多遇和罕遇地震下的動力有限元分析，為進行實際結構設置耗能阻尼器的抗震設計提供了有益的參考。
  9. Though adopting the - coordinate transformation in the control equations and mode - splitting technique, the external mode ( surface gravity waves ) is solved by the improved double - sweep - implicit finite difference method ; the internal mode ( internal gravity waves ) untilizes the eulerian - lagrangian method, which improves the implicit - difference scheme for the vertical direction. the newly developed 3d numerical tidal model with implicit scheme has been successfully applied in the radial sandbanks area

    基於過程分裂法及垂向坐標伸縮變換，外模式採用改進型雙步全隱有限差分dsi法，內模式採用歐拉?拉格朗日公式，改進了三維垂向隱式格式，成功地建立了南黃海輻射狀沙脊群海域三維全隱格式潮流數學模型。
  10. In chapter 4, various implementation issues associated with an acoustic echo cancellation system, such as double - talk detection, finite precision effects, nonlinear processing and howling detection and control are discussed

    第四章主要討論了聲回波抵消系統中的各種實現問題，比如雙講檢測、有限精度的影響、非線性處理和自激信號的檢測與控制。
  11. Reliability assessment of xi - luo - du underground water - power plant : the results have been used by the cheng - du surveying, design and research institute for the preliminary design ; （ 2 ） the stress and strain analysis for the xiao - guan - zi sluice and its foundation : the report has been applied for the reinforcement of the foundation ; （ 3 ） the thermal control procedure for the no. 7 - 14 power plant dam segments of the three gorge project ： the research report provides the effective and efficient methods for the controlling of the temperature field in the mass concrete structure ; （ 4 ） the software system development for the long - term monitoring for dikes ： the software can automatically give the results of the seepage field and the probability of soil piping of dikes and underground ; （ 5 ） reliability assessment of xiang - jia - ba underground water - power plant : the results have been used by the zhong - nan surveying, design and research institute for the preliminary design ； （ 6 ） fatigue reliability estimation of shipping berthing pillar : the results give the optimized design scheme and prediction of the structural age ; （ 7 ） 3 - d static and dynamic stochastic finite element analysis for the strength, stability and thermal control problem for xi - luo - du project

    溪洛渡水電站超大型地下洞室群圍巖穩定的安全可靠性分析：被成都勘測設計研究院應用於比選報告及可行性論證中； （ 2 ）小關子水電站攔河閘壩及地基的應力應變分析：被成都勘測設計研究院應用於地基加固處理方案； （ 3 ）三峽廠房7 # - 14 #壩段溫控並縫措施研究：為廠房壩段並縫方案的可行性提供了依據； （ 4 ）堤防工程體系的長期監控預報預警決策系統開發：為監控、預測預報堤防滲漏管涌破壞提供分析軟體； （ 5 ）向家壩地下洞室群圍巖穩定的安全可靠性分析：被中南勘測設計研究院應用於初步設計方案中； （ 6 ）靠船墩的疲勞可靠度研究：為廣東航運規劃設計院的靠船墩優化設計和加固提供依據； （ 7 ）溪洛渡高拱壩壩體壩基（壩肩）強度和穩定的三維靜動力隨機有限元分析及可靠度計算：為溪洛渡重大工程壩體的靜動力安全穩定性及溫控方案提供依據。
  12. Finite - time control for one kind of uncertain linear singular systems

    一類不確定線性奇異系統的有限時間控制問題
  13. In this paper, robust finite - time control problem of nonlinear systems with dynamic uncertainties is investigated

    摘要討論了一類帶有動態不確定項的非線性系統的魯棒有限時間控制問題。
  14. Finite state machine will be applied to the design of the lift, for the control of elevator control system to respond to the task order

    將有限狀態機應用到電梯的設計中，用於控制電梯控制系統的任務響應順序。
  15. From experimental result, i preliminarily know that eps is good thermal insulation material because the absorption of water is low and heat insulation is good, it is practicable at preserving temperature field of frozen earth roadbed and bringing frozen disaster under control ; second, according to the analysis of the eps that is applied into practical project, i have studied the practical effect which eps preserve roadbed temperature field, and the influence that was made after building field. i have get that eps can influence moisture content and frozen upper limit, through practical measuring data, i have studied freezing and expanding quantity and melting and submerging quantity during a complete frozen and melting cycle as well as have expanded and proved the practical application effect of eps with some reference significance to deep research of some connected problems. finally, through computer data analysis, setting up the analytical model of finite unit, i have simulated the temperature field of roadbed heat preservation, then expounded and proved that the height of embankment influenced the effect of thermal insulation material

    其一是對聚苯乙烯泡沫塑料（ eps ）保溫板以及天然路基土層、路堤填料進行了室內試驗分析，結合國內外現在的有關科研成果，綜合確定其各項特徵參數；從試驗結果初步認識到聚苯乙烯泡沫塑料是一種吸水率低，隔熱性好的保溫材料，在凍土路基溫度場的保護和凍害治理方面是可行的；其二通過eps保溫板在現場工程實踐中的應用分析，研究了保溫板在保護路基土層溫度場的實際效果以及修築路堤后造成的影響，保溫板對土體含水量、凍結上限的影響，通過實測資料，研究了在一個完整的凍融周期內整個路基的凍脹量和融沉變形量，論證了保溫板的實際應用效果，對有關問題的進一步研究和相關工程設計具有參考意義；其三，通過計算機數值分析，建立有限元分析模型，對保溫路基的溫度場進行了模擬計算，論證了路堤高度對保溫材料效果的影響。
  16. B ) equivalent circuit method and finite element analysis ( fea ) to compute the static force are presented, the results obtained by each method are compared one with the other. c ) the results of dynamic simulation by means of the software, ansoft show the hlfm " s characteristics when the motor works in the special frequency and single stroke and the conditions used for position control. d ) the measured static thrust - displacement characteristics and the dynamic characteristics during starting show good correlation with the calculated results

    在設計並製作了實驗樣機的基礎上所做的研究內容包括； （ 1 ）分別用能量法和麥克斯韋張量法推導電磁力的計算公式，並討論他們的不同應用范圍； （ 2 ）分別用等效磁路法和有限元法作直線力電機的靜特性分析，並比較分析它們的計算結果； （ 3 ）用有限元模擬軟體做直線力電機動態特性的模擬，分別分析直線力電機的頻率特性、動子開合閘特性和開環位置控制的工作特性； （ 4 ）做直線力電機的靜推力?位移特性實驗和動子開合閘的動態實驗，並將實驗結果與計算結果進行對比，實驗驗證了計算模型及計算方法的正確性。
  17. Based on the dynamic analysis of the three - dimensions finite element model of three - gorges ship lift structure, the equivalent reduced mechanical model is established. the comparisons beween the dynamic characteristics and seismic response of these two models demonstrate that the reduced mechanical model can be used in the research on the seismic whipping effect control in the top machinery building of the ship lift structure

    本文基於三維有限元模型的動力分析建立了等效的簡化力學模型。兩種模型的動力特性和地震反應表明，升船機頂部廠房地震鞭梢效應的磁流變智能自適應減震控制可以採用本文建立的簡化力學模型模型。
  18. The formulation for the flow model is given using the finite element / control volume ( fe / cv ) technique based on darcy ' s law of creeping flow through a porous media. the heat transfer model is based on the two - dimensional, transient heat conduction equation, including heat generation. the cure kinetics model is based on kamal ' s model, and the degree of the resin cure as a function of temperature and time

    樹脂流動階段的模擬是根據牛頓流體在多孔介質中的滲流理論，應用darcy定律並使用有限元/控制體技術建立起來的；熱傳遞模型是一個二維瞬態熱傳導方程，考慮樹脂反應放熱；樹脂的固化模型利用了kamal提出的固化動力學方程，將固化度取為時間和溫度的函數。
  19. In the numerical methods section, a finite element / control volume mold filling simulation, a tensor representation of fibre orientation and a finite element solution of the transient fibre orientation equations are combined in the program. the input data and output results are visualized by means of finite element software

    程序中用有限單元控制體方法模擬模壓流動，用表徵纖維取向的張量和有限元伽遼金方法來解決瞬時纖維取向方程，用計算機圖形原理編程實現對smc流動軌跡、纖維取向分佈的計算機模擬。
  20. The purpose of this dissertation is to study the lagrangian method and conservative rezonning algorithm. finite volume scheme is used for lagrangian equations of hydrodynamics. because of the pressure gradients " influence upon velocities and energy, computational scheme is proposed for momentum equation on two control volumes in order to suspend the time when the mesh becomes distorted

    本文的目的是研究lagrange方法及重映演算法，主要內容可分為以下幾個方面：首先從積分形式的二維lagrange流體力學方程組出發，用有限體積格式進行計算，考慮壓力梯度分佈對速度和能量改變的影響，構造了在兩個控制體上的動量方程的計算格式，使得速度的改變受其周圍八個壓力的影響，在一定程度上推遲了網格相交的進程。
分享友人
分享到 Line

分享到臉書