finite plane 中文意思是什麼

finite plane 解釋
有限平面
  • finite : adj. 有限的；【語法】限定的；【數學】有窮的，有盡的。n. 〈the finite〉 有限（性）； 〈集合詞〉有限物。adv. -ly ,-ness n.
  • plane : n 懸鈴木屬樹木。n 1 平面，水平面，面。2 （知識等的）發達程度，水平，階段。3 【航空】機翼面；〈常 ...
  1. Perfect pre - processing and post - processing function is one of the main factors to evaluate the vitality and market value of the finite element analysis system surveying today development of finite element analysis technology, most of which concentrate on establishing fine user interface, also has some limitation on application, and especially, the research on the visualization of arbitrary cut - plane is always in ascendants to realize the visual processing on cut - plane needs reprocessing the results of finite element analysis which have get, so the algorithm is two parts : seeking the physical value of cut - plane and drawing 2d contours, the former, based on the theory of stress on " arbitrary inclined plane " in physical mechanics, use the method of linear interpolation method to get the coordination and physical value of intersection between cut - plane and element arris ; the latter, based on the tables on elements, nodes, stress and strain, summarize a rapid algorithm of generating 2d contours based on the grid. this thesis synthesizes there two parts and get a visual processing program under fortran

    縱觀有限元分析技術的發展，目前大多集中在建立良好的用戶界面上的研究仍存在許多應用上的局限性，其中對任意剖面上可視化的研究仍處于方興未艾的階段。要實現任意剖面上可視化處理，必須先將得到的有限元計算結果進行再處理，因此在演算法上分為兩部分：求任意剖面上物理量值的演算法及二維等值線演算法。前一部分以彈性力學中「任意斜截面的應力」為理論基礎，利用線性插值方法得到截面與單元棱邊的交點坐標及交點物理量值；在此基礎上；根據已得到的單元及節點序號表、應力應變物理量表，總結出一種基於有限元剖分網格的快速生成二維等值線的演算法。
  2. Based on the real structure of the forewing and hindwing of dragonfly, the plane geometric models of biomimetic wings are created using some cad software. then the three - dimensional finite element models of biomimetic wings are built by choosing the suitable element types and characteristic parameters

    本文基於蜻蜓真實的翅翼樣本，利用相應cad軟體分別建立了前、后翅翼的幾何結構模型，並通過選擇適當的單元類型及設定特性參數，完成三維仿蜻蜓前、后翅翼的有限元建模。
  3. Because uav is smaller and lighter than normal plane, the miniature aerial rs system is easily effected by wind, its " stabilities of position and stance are not good. because the load of uav is so finite, the large professional aerial photogrammetry camera can not be installed

    微型無人機遙感由於受到無人機平臺體積小、重量輕、任務載荷有限等因素的制約，在飛行作業中傳感器位置和姿態受氣流影響大、穩定性差，而且目前是非專業攝影機成像，這些都大大增加了其影像幾何糾正處理的復雜性。
  4. Lastly the above stiffness matrix, the nodal variables of which are the dual of stress functions, is replaced by a new one with simple displacements vector regarded as unknown. such finite element satisfies homogeneous equilibrium equations and can pass the patch test as long as the original plane elasticity element can pass the corresponding patch test

    所得到的板彎曲單元在單元內部滿足齊次平衡方程，並且只要原始平面彈性單元能通過常應變分片試驗則轉換得到的板單元一定能通過常曲率分片試驗。
  5. In this paper, the finite - element numerical analysis calculation is applied to the foundation of high - rise and multi - floor building and the evolvement law of stress and displacement of tunnel used by urban traffic to explore the mutual influence between the wall rock of underground space and high - rise building foundation, taking account of the specific construction situation in the " sanmu garden " project in dadukou district in chongqing, from the perspective of underground space static - force structure stability analysis to open a underground tunnel with 6m in span and 7. 5m in height for track traffic 20m below the surface. this paper, taking considerations of three different states, i. e. the natural state without any artificial interference, the state of high - rise buildings on the surface, and the underground tunnel state with excavation for track traffic, and four plane lines and four vertical lines, analyzes and studies the distributing law of stress and displacement of calculation section from the following aspects : ( 1 ) the main stress vectorgraph, displacement distribution graph ( ux, uy ) and chromatogram graph of stress isoline ( 1, 2, xy ) of section under different states ; ( 2 ) the contrastive distribution curve of stress ( 1, 2, xy ) of different plane and vertical lines under the same state ; ( 3 ) the contrastive distribution curve of stress ( 1, 2, xy ) of the same plane and vertical lines under different states, wishing to provide references for underground space utilization and project designing and construction of the tunnel under high - rise buildings in the future

    本文結合重慶市大渡口區「三木花園」開發建設項目，從地下空間靜力結構穩定性分析角度出發，針對在該項目中涉及的高層和多層建築物以及在其地下20米處開挖了一個用於軌道交通的跨度6米，高7 . 5米的地下隧道這一具體工程情況，採用2d - 3d -有限元結構分析程序對高層與多層建築物的地基基礎及其與城市軌道交通使用的地下隧道圍巖的應力與位移演變規律進行了有限元數值分析計算，探索了地下空間圍巖與高層或多層建築物地基基礎之間的相互影響，通過考慮未受到任何人為擾動影響的天然狀態、地表存在多層或高層建築物狀態和地下開挖用於軌道交通的地下隧道狀態等三種不同狀態以及4個水平剖線和4個垂直剖線等不同情況，從以下幾個方面具體分析研究了計算斷面的應力與位移分佈規律： （ 1 ）在各種不同狀態下計算斷面的主應力矢量圖、位移分布圖（ ux 、 uy ）以及應力等值線色譜圖（ _ 1 、 _ 2 、 _ （ xy ） ）等； （ 2 ）相同狀態下不同水平與垂直剖線的應力_ 1 、 _ 2和_ （ xy ）對比分佈曲線； （ 3 ）不同狀態下相同水平或垂直剖線的應力_ 1 、 _ 2和_ （ xy ）的對比分佈曲線等，為今後在對地下空間的開發利用以及在高層建築物地下開挖硐室時的工程設計和工程施工提供參考依據。
  6. The main popular theoretical method adopted to study end - plate connection is finite element technique under monotonic loading at present. this paper applies nonlinear ( material, geometry and contact ) finite element method to analyze the behaviors of connections under cyclic load at fist time. contact elements are set between end plate and column flange, screw cap and neighborhood plane, bolt bar and hole

    對于端板連接的理論分析，目前國內外的研究主要局限在單向加載有限元分析范疇，本文首次採用三維非線性（包括材料、幾何與狀態非線性）有限元對端板連接進行了循環加載分析，端板與柱翼緣間、螺栓頭（帽）與相鄰板件間、螺栓桿與孔壁間都設置了反映邊界狀態的接觸單元。
  7. First, using strip - partitoning method and programming in matlab language, the numerical caculations of the relation curve between moment and curvature are done for the beams strengthened with non - prestressed and pretressed cfrp sheets, base on the assumption of plane section, non - bonding slip and non - peeled destroy. secondly, nolinear finite elemeant analysis by ansys are done for the beams strengthened with prestressed cfrp sheets base on the three assumptions before mentioned, the analysis are all done for the relation curve between load and displacement, the distribution of material stress, the distribution of cracks. lastly, calculation formula of flexural capacity and deflection are proposed

    ）的全過程關系曲線。其次基於上面的三個假定，選擇合理的本構關系，利用ansys通用有限元分析程序對預應力碳纖維布加固梁進行非線性有限元分析，分析了加固梁的荷載-撓度關系、材料的應力情況、裂縫的分佈情況等。最後提出了承載力計算公式和正常使用狀態下撓度計算公式。
  8. Based on the fem program on fracture of plane structure developed by professor fu xiaoling of ho hai university, a two demension damage and fracture finite program package which is programed in fortran 90 language is developed. the paper adopts the plane - eight - nodes isoparameters element and compute the developing law of the damage and macro - damage of plane structure under load. considering the original damage and tension and compression damage at the same time, the paper adopts the more reasonable concrete constitute relation of two demension and exponent function model

    在河海大學符曉陵副教授所編制的平面結構斷裂有限元程序（ dl08p4 ）基礎之上，本文用fortran90語言編制的二維損傷-斷裂有限元程序包，程序採用平面八結點等參數單元分析計算平面結構在外荷載作用下損傷及宏觀裂縫的發展規律，考慮了混凝土結構體內存在著初始損傷和同時存在的拉、壓損傷，並且採用更為合理的具有損傷含義的混凝土二維本構關系（即正交異性損傷模型中的本構方程）和指數函數模型建立的並可進行拉、壓損傷可比性換算的損傷演變方程，較為真實地反映了實際情況。
  9. Based on the design of hanpingzui rockfill dam with concrete facing slab, the stresses and deformations of the dam body and impervious system are calculated by using the elastoplastic plane finite element method

    摘要根據漢坪咀混凝土面板堆石壩的工程設計，用彈塑性平面有限元法，計算了堆石壩壩體、防滲體系的應力和變形。
  10. Application of finite volume method in plane 2 - dnumerical model for nonuniform sediment

    平面二維全沙數值模擬方法及其應用
  11. The finite element method incorporated with floquet theorem is used to solve the 2 - dimentsional scattering problem of dielectric electromagnetic bandgap upon which a plane wave is oblique or perpendicular incident

    採用有限元和floquet定理相結合的方法，對不同參量的二維介質電磁帶隙ebg結構的反射和傳輸特性進行了研究。
  12. The study about geometric properties of finite sets of points in the plane is one of the most famous and fundamental topics in combinatorial geometry

    平面點集幾何性質的研究是組合幾何中的一個重要內容。本文討論其中最為著名的erd （ ? ） s問題。
  13. This paper mainly aims at the strategic demands for large - aperture lightweight mirror proposed by high - tech development. its main research contents are : select material blank for lightweight mirror according to physical and chemical properties of optical glass ; analyze and calculate the deformation quantity of the mirror with finite element method ; design and optimize mirror body structure of 400 lightweight plane mirror and 450 lightweight spherical mirror, analyze glass cutting principle, design specisl - use grinding wheel structure, select reasonable technological parameters to implement the processing of weight reduction holes on 400 plane mirror ; analyze etching mechanism of hydrofluoric acid, look for the technological parameters such as the optimal acid concentration and etching time etc. ; eliminate the stress of weight reduction holes and micro - cracks on 400 lightweight plane mirror ; discuss the processing principle and

    本論文的研究主要是瞄準國家高技術對大口徑輕型鏡的戰略需求而開展的。主要研究內容是：根據光學玻璃的物理與化學性能，選擇輕型鏡坯材料；用有限元法對鏡子的變形進行分析、計算，找出變形規律，優化設計400mm輕型平面鏡、 450mm輕型球面鏡鏡體結構；分析玻璃切削原理，設計專用磨輪結構，選擇合理工藝技術參數，完成400mm平面鏡輕量化減重孔的加工；分析氫氟酸腐蝕光學玻璃機理，尋找最佳酸濃度、腐蝕作用時間等工藝參數，實現400mm平面鏡減重孔應力與微裂紋的消除；討論分離器加工原理和工藝技術特點，完成400mm平面輕型鏡面形加工。
  14. The regular growth of dirichlet series of finite order in the half plane

    級數在水平直線上的增長性
  15. In this paper, we first study the growth and regular growth of dirichlet series of finite order by type function in the plane and obtain two necessary and sufficient conditions ; and prove that the growth of random entire functions defined by random dirichlet series of finite order in every horizontal straight line is almost surely equal to the growth of entire functions defined by their corresponding dirichlet series. then we define the hyper - order of dirichlet series of infinite order respectively in the plane or in the right - half plane, study the relations between the hyper - order and regular hyper - order of dirichlet series of infinite order and the cofficients ; obtain the hyper - order of random entire functions defined by random dirichlet series of infinite order in every horizontal straight line is almost surely equal to the hyper - order of entire functions defined by their corresponding dirichlet series

    本文首先利用型函數研究了全平面上有限級dirichlet級數的增長性和正規增長性，得到了兩個充要條件；證明了有限級隨機dirichlet級數的增長性幾乎必然與其在每條水平直線上的增長性相同。對于無限級dirichlet級數，分別在右半平面及全平面上定義了其超級的概念，研究了它們的超級和正規超級與其系數間的關系；得到了平面上無限級隨機dirichlet級數的超級幾乎必然與其在每條水平直線上的超級相同。
  16. The explicit finite element method ( fem ) based on the varying time - step was selected to analyse the dynamic roll - pass process ; the nodes on the leading face of the steady - state elements set was extracted and projected onto a plane to give the required mesh, also called the origin mesh ; the implicit fem was selected to analyses the inter - pass transient thermal process ; a geometric part from the mesh was generated and meshed by using the quadrilateral elements, a heat transfer analysis was selected to transfer the node temperature data ; a new model was created by using hexahedral elements, mapping the node temperature and the equivalent plastic strain on the integration points

    利用基於變步長中心差分格式的顯式積分方法分析瞬態軋制過程；提取穩態單元集節點形成截面網格；利用隱式積分方法分析軋制道次間隙瞬態溫度場；對型鋼斷面進行平面四邊形網格劃分並映射節點溫度數據；利用六面體單元構建有限元分析模型，映射單元節點的溫度、積分點的等效塑性應變，進行數值分析。
  17. Abstract : reviewed are five methods for the analysis of the penetration of jacked - in piles, namely, cavity expansion method, strain path method finite element method, slip line method and calibration model test. after analysis, it is pointed out that it is more rational to adopt sub - statical spatial axisy numerical formulas based on traditional plane - strain cavity expansion method in the analysis. after spatial closed - form solutions are obtained for soil movements, stresses and initial excessive pore pressures generated durihy pile penetration are found out. it is suggested that finite element analysis together with centrifugal model test be used in verifying the results

    文摘:在分析飽和粘土中靜壓樁的貫入機理的基礎上，對靜壓樁沉樁分析的圓孔擴張理論、應變路徑法、有限元分析、滑移線理論和模型槽試驗等五種方法逐一進行評述，並提出在傳統的平面圓孔擴張理論基礎上加以改進，採用準靜態空間軸對稱方程組對靜壓樁貫入過程進行模擬，從而得出土體位移、應力、初始超孔壓的空間解析解，同時採用有限元分析、模型槽試驗相互印證的研究方法
  18. The algorithm for convex hull set of plane finite point set

    平面有限點集最小凸包集的計算方法
  19. Based on the theories of hybrid / mixed finite element method, the generalized energy functional including stress, mechanical displacement, electric displacement, electric field and electric potential is used, with the electric - potential relations and the constitutive equations of piezoelectric materials constrained, hybrid energy functional including mechanical displacement, electric potential and stress is gained. moreover, splitting in - plane components and transverse components, the mixed energy functional in which mechanical displacement, transverse stresses and electric potential as basic variables is derived. with the use of surface stress parameters of sub - elements, the continuity of transverse stress at interfaces between layers is obtained

    在回顧雜交混合有限元理論的基礎上，從包括位移、應力、應變、電勢、電位移、電場強度六個未知量的廣義壓電材料能量泛函出發，通過約束電場強度?電勢關系、應力與應變及電場強度的關系，得到僅包括位移、電勢、應力三個未知量的雜交變分泛函，利用一般層合板的雜交混合變分原理，分離面內分量和橫向分量，導出以位移、橫向應力、電勢為未知量的壓電層合板的修正變分泛函，作為壓電層合板的雜交元列式的理論基礎。
  20. Using the complex potential method in the plane theory of elasticity of an anisotropic body, a series solution to the stress field of a finite plate containing multiple cracks subjected to arbitrary loads is obtained by means of the faber series expansion, and the stress intensity factors at the crack tips are calculated based on the theories of fracture mechanics. equivalence yield stress is introduced in order to consider the effects of the plastic zones, with which the strip yield criteria is developed in the article so that the effects of structural size and the crack interactions on the stress distribution can be considered accurately. the effects of plate size, crack size and crack distributions on the stress intensity factors as well as the residual strength of the plate are studied detailedly

    採用各向異性體平面彈性理論中的復勢方法，以faber級數為工具，得到了含多裂紋有限大板在任意載荷作用下應力場的級數解，並應用斷裂力學方法確定裂紋尖端的應力強度因子；引入當量屈服應力考慮裂尖塑性區的影響，提出基於帶屈服準則的剩餘強度分析模型，能夠充分考慮結構尺寸和裂紋之間相互作用對應力場的影響；通過數值計算詳細討論了結構尺寸和裂紋之間位置關系對應力強度因子和結構剩餘強度的影響規律，得到了一系列對工程應用具有實用價值的結論。
分享友人
分享到 Line

分享到臉書