flange end 中文意思是什麼

flange end 解釋
法蘭端頭
  • flange : n. 1. 【機械工程】法蘭（盤）；凸緣；邊凸緣製造機。2. （鐵路軌的）寬底。3. 【建築】（梁）翼緣。vt. 在…上安裝凸緣。 a flanged wheel 凸緣輪。
  • end : n 1 端，尖，末端，終點。2 邊緣；極點，極限。3 結局，結果。4 目的。5 最後，死。6 【紡織；印染】經...
  1. As one kind of key equipment in piping work of large - scale turbo - generator set in power plant, the machine is especially applicable to various welding bevels, flat end and angle of outer & inner diameter of ascending pipe, elbow pipe, bend, flange and etc., which greatly meets demands in pipe processing of construction site and manufacturers

    本機床是電站大型汽輪發電機組的管道施工的關鍵設備，對直管、彎管、彎頭、法蘭等管體的各種型式焊接坡口，端平面，內外徑過緩斜度及直口，能滿足施工現場和製造廠家對各種管件的加工要求。
  2. Furthermore, in order to predict the force at beam tension flange when end - plate yields, kulak method, applied to determine the ultimate strength of the t - stub connections, are modified by introducing a parameter c. the general solution of parameter c is also provided in this paper

    在有限元計算的基礎上，本文分析了影響節點強度的主要因素，包括： （ 1 ）螺栓和端板的強度； （ 2 ）柱翼緣的抗壓強度； （ 3 ）柱腹板的抗壓強度。
  3. Specification for lap joint flange pipe end applications

    搭接法蘭管端規范
  4. Standard specification for lap joint flange pipe end applications

    搭接法蘭管端設備標準規范
  5. 2. pseudo - static force testing of twelve full - scale connections, including top - seat angle connections, two web flange and top - seat connections, extended - end - plate connections, slit - t steel connections and dog - bone connections are carried out for the first time in our country

    2首次在國內大規模地進行了頂底角鋼連接、帶雙腹板頂底角鋼連接、外伸端板連接以及短t型鋼連接等半剛性連接以及狗骨式剛性連接這五種連接類型共十二個原型試件的擬靜力試驗。
  6. The main popular theoretical method adopted to study end - plate connection is finite element technique under monotonic loading at present. this paper applies nonlinear ( material, geometry and contact ) finite element method to analyze the behaviors of connections under cyclic load at fist time. contact elements are set between end plate and column flange, screw cap and neighborhood plane, bolt bar and hole

    對于端板連接的理論分析，目前國內外的研究主要局限在單向加載有限元分析范疇，本文首次採用三維非線性（包括材料、幾何與狀態非線性）有限元對端板連接進行了循環加載分析，端板與柱翼緣間、螺栓頭（帽）與相鄰板件間、螺栓桿與孔壁間都設置了反映邊界狀態的接觸單元。
  7. In this thesis, four types of steel beam - rectangular cfst column connections, including normal welded flange plate ( wfp ) connection, bolted flange plate ( bfp ) connection, stiffened end plate ( sep ) connection and double split - tee plate ( dst ) connection, were designed based on the configuration of steel frame connection. total 8 models, 2 models of each kind of connections were tested under low - reversed cyclic loading at the end of cfst columns. the relationships between force and displacement at the end of columns, the relationships between the moment and rotation of the joints, degradations of strength and stiffness, ductility, failure mechanism and failure characteristics of these four connections under different axial - compression ratios were presented

    本文借鑒鋼框架節點構造，設計了四種類型矩形鋼管混凝土柱與鋼梁連接節點，包括常規栓焊（ wfp ）節點、翼緣全螺栓連接（ bfp ）節點、雙t板連接（ dst ）節點以及加勁端板連接（ sep ）節點，進行了四類節點8個模型試件在柱端低周反復荷載作用下的抗震性能試驗研究，比較了不同軸壓比下節點的滯回性能、強度與剛度退化、延性、破壞機理與破壞特徵，主要結論有： 1 、節點的位移滯回曲線與轉角滯回曲線為塊型分佈，沒有或略有捏攏現象，耗能能力強； 2 、軸壓比對節點滯回曲線有顯著影響，全部節點都有顯著的剛度退化； 3 、位移與轉角骨架曲線在峰值荷載後有較長的水平或下降段，具有良好的延性性能； 4 、從整體抗震性能上看，翼緣全螺栓連接節點、雙t板連接與加勁端板連接節點都優于常規栓焊節點，可在實際工程中加以推廣。
  8. Notes in installation : the scour - proof direction of measuring end marked in the flange is the same as the direction of flowing fluid at high temperature

    三安裝安裝時應注意：法蘭上標示的測量端耐沖刷方向與高溫沖刷介質的流向一致。
  9. The main shuchural features of the new electric single - girder overhead travelling crane presented in this paper is as follows : using a special gisder section to provide simple production technology and light weight ; dopting hinged connection at one end between main glrders and end carrages instead of the rigid connection at both ends, eliminating the three - point supporting problem with the crane and thus improving the travelling perfomance ; extending crane wheels life contributed to the combination of no - flange crane wheels and horizontal rollers

    提供種生產工藝簡單、自重輕的主梁截面，並將單梁起重機主、端梁的剛性連接改為端用鉸接連接，解決了在製造和軌道安裝時因誤差而造成的大車運行三條腿現象，提高了運行性能；用可調大車運行水平輪中心距的設計，代替帶輪緣的大車輪，提高大車輪的使用壽命。
  10. Visual observations showed that a horizontal displacement in the longitudinal direction of the bridge developed between the tie girder and the top flange of the floor beam at the end connection.

    肉眼觀察表明：在端節點處的系梁和橫樑上翼緣之間產生一種沿橋梁縱向的水平位移。
  11. Press tools - guide pillars - type d, end - locking pillars with flange

    沖壓工具.導柱. d型帶法蘭的端鎖式導柱
  12. Series of high pressure thermocouples thermalresistances and thermowells, the thermocouple take the form of spring - loaded, of which protective tube and flange are forged of special alloy, as well the thermowell are formed with bar stock drilled. more further, theconnecting between thermowell and flange can be compressed with tapered thread and the groove at the lower end of flange can be welded with argon arc. these thermocouples are usually used in high equipments of hydrogen cracking device, cracker and vaporizer etc for pressure - resistant in over 30 mpa, operating temperature from 0 up to 800

    系列高壓熱電偶阻及套管，熱電偶採用彈簧壓著式，保護套管和法蘭選用特殊合金材料鍛造，套管採用棒料整體鉆孔加工而成，與法蘭連接處以錐管螺紋配合併與法蘭下端渠槽處用氬弧焊接，耐壓30mpa ，使用溫度0800 ，可長期使用在加氫裂化裝置裂解裝置，氣化爐等高壓設備中。
  13. Apply silicon sealer / lubricant to the inner and outer diameters of the flange kit gasket, and press the gasket onto the valve body end

    將硅密封/潤滑劑施加在法蘭組件墊圈的內徑和外徑上，將墊圈壓在閥體埠上。
  14. Q41f - 10c catena pad fluorine valve, q41f - 10cf catena pad fluorine valve, j41f - 16 pad fluorine end - valve, j44f - 16 angle form pad fluorine end - valve, sj41f - 10c pad fluorine inspect - lens, the connect form is flange, the passing parts of valve - body lumen and valve - cover valve - core etc. are all metal pad fluorine plastic inside, rotproof excellently

    Q41f - 10c系列襯氟球閥， q41f - 10cf系列襯氟放料閥， j41f - 16系列襯氟截止閥， j44f - 16系列襯氟角式截止閥， sj41f - 10c襯氟視鏡，連接形式為法蘭式，閥體內腔及閥蓋閥芯等過流部件均為金屬內襯氟塑料，耐腐蝕性能優異。
  15. The catena products design for stsrting closing controling of diversified strong corrosive medium, configuration form is float through form, connect form is flange, the passing parts of valve - body lumen and valve - cover valve - staff etc. are all metal pad fluorine plastic inside, rotproof excellently. the product have son - catena j41f - 16 pad fluorine end - valve and j44f - 16 angle form pad fluorine end - valve choosing to use

    本系列產品是為各種強腐蝕性介質的啟閉控制而設計，結構形式為直通式和角式，連接形式為法蘭，閥體內腔及閥蓋閥桿等過流部件均為金屬內襯氟塑料，耐腐蝕性能優異。
  16. Lug body available with iso flange dimensions and metric bolt hole threads. for dead - end service use lug style ( rated 200 psi for this service )

    凸耳閥體也可配置iso法蘭尺寸和公制螺栓孔螺紋。用於終端位置可採用凸耳結構（此時額定壓力為200psi ） 。
  17. Position the two halves of the flange adapter onto the groove in the valve body end ( s ), making sure that the tab on each flange adapter half is located between the two locking lugs on the valve body ( fig. 3a )

    將法蘭適配器的兩半放置在閥體連接埠的溝槽上，確保每個半邊法蘭適配器上的孔位於閥體上兩個閉鎖凸榫上（圖3a ） 。
  18. The machine can not only process the u 、 v welding line of end sloping back ridging, edge cutting for carbon steel stainless steel and allayed steel pipes, but also can treat the welded convex flange and plain flange

    本機除對碳鋼、不銹鋼、合金鋼等材料管子的u ， v型焊縫的坡口、例棱、削邊等加工外，並能對焊后的凸面法蘭和平面法蘭進行加工。
  19. End flange - mounted fuel injection pump

    端部突緣安裝式燃油噴射泵
  20. By using the techniques including the zinc coating of cold rolled steel plate and the surface spray, the fiber cable distribution plate adopts spraying material doped with fire retardant materials. it is characterized as light, flexible, firm and durable. it has reliable cable inlet, grounding and fixing and the splicing between theterminal end and pigtail. users can select unit or ring flange amount according to their practical needs

    採用鍍鋅處理冷軋鋼板和表面噴塗的工藝，光纖分配盤採用摻雜阻烯材料的噴縮材質，輕便靈活，又結實耐用，具有光纜引入固定和保護功能光纜終端與尾纖熔接功能，用戶可根據實際需求選配單元數量或法蘭盤數量。
分享友人
分享到 Line

分享到臉書