formed beam 中文意思是什麼

formed beam 解釋
壓制梁
  • formed : 成形的
  • beam : n 1 梁,棟梁,桁條;(船的)橫梁。2 船幅;(動物、人的)體幅。3 (秤)桿,杠桿,(織機的)卷軸,...
  1. Because the beam formed by a tapered coupler is produced by many rays that emerge at slightly different angles, the outgoing beam is characterized by a relatively large divergence.

    因為尖劈耦合器形成的光束是由許多出射角稍有不同的光線組成的,放出射光束的特點是具有較大的發散度。
  2. The system is composed with concrete filled cold - formed square steel tube column, the beam with two cold formed c type steel welded together back to back, the slab with profiled - steel and concrete, the beam and the slab joined into composite steel - concrete beam. they all together make up of the bearing members. and the house also includes the light economical - energy sources heatproof walls

    該體系是以冷彎薄壁方鋼管混凝土為柱、冷彎薄壁c型鋼背靠背高頻焊接組成工字型梁、壓型鋼板上現澆築混凝土組成組合樓板並與梁一起構成組合梁作為承重構件,以輕質節能保溫型墻體作為圍護結構組成。
  3. Elemental analysis based on the emission from plasma generated by focusing a powerful laser beam on a solid sample surface is known as laser - induced breakdown spectroscopy ( libs ). when the power density of laser on the sample surface is high enough, the sample is vaporized, and the neutral and ionic species are formed in excited states

    利用聚焦的強激光束入射固體靶表面產生激光等離子體,對等離子體中原子和離子發射譜進行雜質元素分析,這一過程叫做激光誘導擊穿譜( laser - inducedbreakdownspectroscopy ) ,簡稱( libs ) 。
  4. The ultra - thin er layers with the thicanesses in the range of 0. 5 ~ 3 monolayer ( ml ) are formed by electron beam evaporation on si ( 00l ) substrate at room temperature in an ultra - high vacuum system. after annealing at lower temperatures, ordered simcfores form on the surface. the trallsition of the surface reconsmiction pattem from ( 2 x l ) to ( 4 x 2 ) with the increase of er coverage up to l ml is observed by the reflective high energy electron diffraction ( rheed ) and low energy electron diffraction ( leed )

    本文是關于硅( 001 )襯底與電子束淀積的鉺、鉿原子反應形成的超薄膜的界面與表面性質的研究,以及在該襯底上出現的共振光電子發射現象,包括了以下四個方面的工作: 1鉺導致的硅( 001 )襯底上的( 4 2 )再構研究利用反射高能電子衍射和低能電子衍射,在室溫淀積了0
  5. Injun joe s bowie - knife lay close by, its blade broken in two. the great foundation - beam of the door had been chipped and hacked through, with tedious labor ; useless labor, too, it was, for the native rock formed a sill outside it, and upon that stubborn material the knife had wrought no effect ; the only damage done was to the knife itself

    他死前拚命用刀砍過那門下面的大橫木,鑿穿了個缺口,可是這沒有用,外面的石頭天然地形成了一個門框,用刀砍這樣堅固的門框,簡直是雞蛋碰石頭,根本不起作用,相反刀倒被砍得不成形了。
  6. Ultrasonic bio - instrumentation has several display modes used in medicinal field now, such as b - mode and m - mode, etc. b - mode uses the modulated brightness to represent the amplitudes of ultrasonic echoes, and the coordinates in the formed profiles correspond to positions of ultrasonic beam scans one by one

    B型顯示是用亮度調制來顯示回波脈沖幅度,顯示的橫軸和縱軸與聲束掃描的位置一一對應,形成超聲切面圖像。
  7. The recording system has been formed as in - line holography and only a single beam is used for recording, so an antivibration arrangement is not required

    該記錄系統僅需一束照明光束,記錄過程不需特定的防震裝置。
  8. Lognitudinal and transversal members of grillage, regarded as cuved - beam element and straight - beam element, are analyzed by finite element method, and the module for grillage static analysis is formed, by using table of information of nodal point restraint to assemble stiffness matrix for structure in restraint

    將梁格縱橫構件分別按曲梁和直梁兩種單元進行有限元分析,引入結點約束信息表進行約束結構剛度矩陣的組集,形成了曲桿梁格靜力分析模塊。
  9. The reference beam comes from the object wave itself and image of the object is formed by a lens on the plane of the holographic plate, therefore the hologram is named self reference image hologram

    用透鏡將物體的像成在記錄干板平面附近,參考光來自物光本身,因此稱之為自參考像全息圖。
  10. ( 2 ) the experiments of 8 full size cold - formed thin - walled c steel beam - to - column connections with self - drilling screws connecting

    ( 2 ) 8個足尺自攻螺釘連接的冷彎薄壁c型鋼樑柱節點的試驗。
  11. This thesis fetches cold - formed thin - walled c steel beam - to - column connections with self - drilling screw connecting for being researched object in cold - formed thin - walled light steel structure system, have done the following three parts of research work to the performance of beam - to - column connection : ( 1 ) the resisting shear strength experiments of 20 pieces of jointing connected by self - drilling screws

    本文取冷彎薄壁輕鋼龍骨住宅鋼結構中用自攻螺釘連接的c型鋼樑柱節點為研究對象,對節點的連接性能作了如下三部分研究工作: ( 1 ) 20個自攻螺釘連接試件的抗剪承載力試驗。
  12. Four groups of eight types of connection methods are suggested to be able to use for the joint of cold - formed rectangular tube - steel column and h - shaped beam by investigating the current research on the beam - to - column connection methods used at home and abroad, at the same time, a new type of connection is proposed in this article

    本文在對國內外冷彎矩形鋼管與焊接箱形鋼管節點型式研究的基礎上總結出四類八種適合於冷彎矩形鋼管柱與h型鋼梁連接的節點型式,並提出一種新型節點連接型式,分別給出了相關的設計規定和使用條件。
  13. Using the software of ansys, this thesis compares and analyzes the seismic behavior of the joint of cold - formed rectangular tube - steel column and h - shaped beam and the joint of welding box column and h - shaped beam, in order to research the influence for the cold forming process of the cold - formed rectangular tube - steel column

    利用大型通用有限元分析軟體,對冷彎矩形鋼管柱與h型鋼梁連接節點與焊接箱形鋼管柱與h型鋼梁連接節點的抗震性能進行對比分析,探討出冷彎矩形鋼管的特性對節點抗震性能的影響。
  14. In order to investigate the phenomenon that holograms tend to be deteriorated on baing recorded in photopolymers with shrinkage, a fourier hologram is taken with slant gratings formed by the reference beam and object beams of different space - frequency

    摘要為了分析光致聚合材料記錄的譜面全息圖在再現過程中發生「擦除」現象,將譜面全息圖看作由不同角譜的物光與參考光在光致聚合材料內形成的不同傾斜角度的光柵總和。
  15. At the different recording angles, the raman - nath diffraction and bragg diffraction phenomenon are observed, respectively. then, the wavelength selectivity and the relationship of diffraction efficiency and polarization state are discussed when the recording angle of 60 ? formed by two writing beam

    分別觀察到了寫入光束夾角不同時光柵的拉曼-奈斯衍射和布拉格衍射現象,並對雙光束夾角為60時寫入光柵的波長選擇性及衍射效率與入射光偏振態的關系進行討論。
  16. On structure design aspect, a closed magnetic route around the gmm is formed, so magnetic symmetry and intension of gmm are improving ; on analysis of electricmagetic characteristics aspect, ansys software is applied to analyze the gma to optimize its structure ; on ampliflcatory power system aspect, based on the characteristic of driving power of gma and the principle of constant current source, a power amplifier using power mosfet is designed ; on testing equipments aspect, measure bracket is designed including transom, stand beam, screw, pedestal ; on cooling system aspect, a constant temperature cooling system is designed theorily

    本文根據稀土超磁致伸縮材料的特點及其在工業元件、系統中的應用要求,在以往微位移致動器的基礎上,克服他們的不足,經過各方面的完善,設計出一種精確的、適合於主動控制的稀土超磁致伸縮位移致動器,主要在稀土超磁致伸縮致動器結構設計、電磁特性分析、功放系統以及最後的實驗測試系統方面進行了設計,同時對溫度冷卻系統也做了一些理論設計。
  17. Putting on their gloves all set to work in a row in front of the press, an erection formed of two posts connected by a cross - beam, under which the sheaves to be drawn from were laid ears outward, the beam being pegged down by pins in the uprights, and lowered as the sheaves diminished

    她們戴上手套,在機器的前面站成一排,就開始工作了。機器是由兩條腿支撐起來的架子,兩條腿中間用一個橫梁連接起來,下面放著一束束麥草,麥穗朝外,橫梁用銷子釘在柱子上,隨著麥束越來越少,橫梁也就越降越低。
  18. The results show that ti2n ( 200 ) tropism interplanar is obtained when the ion beam energy is 875ev and the current is 60ma. the ti2n crystals embed in the films deposited at low temperature, while tin crystals are formed at high temperature. the analyses of component show that the tiny films are rich - nitrogen

    結果表明:在能量為875ev 、束流為60ma時獲得取向較好的ti _ 2n ( 200 )晶面;低溫沉積的薄膜的主晶相為ti _ 2n ,高溫沉積時為tin ;成分分析表明tin _ y薄膜是富氮的。
  19. Thermal coefficient of resistance of vanadium oxide film formed by lon - beam - enhanced deposition

    離子束增強沉積氧化釩薄膜的溫度系數
  20. Via comparing chinese specification with aisc specification, some important factors that must involve in the design of floor system consisting of composite slab and composite beam are complemented. the two most important is the shape of formed steel deck that can be used in composite slab and the design shear strength of welded stud shear connectors

    在組合樓蓋體系設計中,筆者通過對中、美兩國規范、規程的對比,對在中國規范、規程中未曾明確提出卻需要在組合樓蓋設計中加以考慮的一些因素進行了說明,其中最主要的是壓型鋼板的選型依據和焊釘抗剪承載力的影響因素。
分享友人