high strength composite 中文意思是什麼
high strength composite
解釋
高強度復合材料-
The particles distributed hi the matrix of grey cast iron, but some contact each other. the composite layer extend gradually into the substrate. when volume fraction of wc is 36 wt % and 27 wt %, the matrix of the composite is high chromium cast iron, consist of white carbide bars and the austenite. wc particles distributed uniformly, retaining approximately quondam granular form in the composite layer which has an evident interface area with the substrate, with good bonding strength
對不同碳化鎢體積分數的灰鐵和低鉻鑄鐵基復合材料的微觀組織結構分析表明：碳化鎢體積分數為52時，復合層內基體為灰口鑄鐵組織，顆粒直接分佈在灰鐵基體上，部分碳化鎢顆粒有相互接觸的現象，基材與復合層之間沒有明顯的過渡；碳化鎢體積分數為36 、 27時，復合層內基體為高鉻鑄鐵，由面塊狀的奧氏體和白條狀碳化物組成，碳化鎢顆粒表面固溶於基體組織中，粒形基本保持完整，分佈均勻，與基體構成冶金結合，基材與復合層之間存在一個明顯的平緩過渡區。 -
The binding principle in pelletizing covers a comprehensive model of interfacial reaction among particles inside green pellets, the formation of binding film during hardening of green pellets by baking to obtain enough strength for a volumetric catalyzed reduction model for cold - bound pellets bearing composite binder and corresponding high temperature reduction system in rotary kiln
提出了含復合粘結劑的生球強度界面作用力綜合模型，冷固球團礦強度的粘結膜機理，含復合粘結劑的冷固球團礦催化還原體積反應機制及全窯高溫快速還原熱工制度。 -
Fiber reinforced plastic rebar ( frp ) is a new composite, which is composed of fiber acting as reinforced material, synthetic resin acting as matrix, and some adequate auxiliaries, and is formed through a pultrusion process and necessary surface process. it has a high strength to weight ratio, excellent non - corrosive characteristic, fatigue - resistant characteristic, strong designability and magnetic neutrality, so it can be used in the applications with special performance requirements or where reinforcing bars are subjected to severe chemical attack
纖維增強塑料筋是以纖維為增強材料，以合成樹脂為基體材料，並摻入適量輔助劑，經拉擠成型技術和必要的表面處理所形成的一種新型復合材料，具有比強度高、耐腐蝕性能好、可設計性強、抗疲勞性能好、耐電磁等獨特優點。 -
It is high performance concrete of low water - binder ratio. with its own gravity and without any vibration, it can fill up the space automatically. with high adding quantity of fly ash and slag, high quality water reducing agent and other compound admixture is the most important technology of this kind of high performance concrete. scc focus on high workability at the same time on high strength and high durability through choosing the composite of aggregate, additives, content of cementions material, admixture reasonably and the optimum design of mix proportion
本文研究了採用吉林省本地原材料和常規生產工藝配製c40自密實混凝土的製作技術，採用水膠比、粉煤灰摻量、砂率、膠凝材料總量四個因素進行配合比的正交設計，試驗分析了自密實混凝土拌合物的工作性以及硬化后的力學性能、耐久性和生產與施工注意事項，並對其經濟性做出了客觀評價，本次試驗為吉林地區自密實混凝土的推廣應用提供了數據基礎。 -
Filament winding is an important technology in manufacturing high strength composite components and is first used in national defense and aerospace industry. now it has been gradually applied in civil use and has bright future
它最早應用於國防和航天工業中，現在已逐漸向民用擴展，在民用工業中有著廣闊的應用前景和推廣價值。 -
The results show that, composite could be fabricated on the complicated surface by means of sodium silicate sand mold combination with vacuum infiltration process. when the substrate was 10 mm, composite layers reached 3 mm to 5 mm in thickness with high strength interface and less casting defect. microstructures of grey cast iron and low chromium cast iron matrix composites with various volume fraction has been analyzed
結果表明：用水玻璃砂型（芯）加負壓鑄滲的工藝能夠實現復雜表面（曲面）顆粒增強復合材料的制備，澆注方式簡單可靠，基材厚度在10mm時，復合層厚度能達到3 5mm ，且復合層鑄造缺陷少，復合效果好，界面緻密而且結合強度高。 -
Pk prestressed composite slab is a new composite floor structure by improving the traditional prestressed composite slab, its precast slab is a prestressed ribbed panel of which prestressed steel is a spiral ribbed high - strength wire, which make the precast component a higher stiffness and buckling capacity
本文研究的pk預應力疊合樓板是通過不斷改進傳統預應力疊合板后研製的一種新型疊合樓板結構，其預制構件為帶肋薄板，預應力筋採用螺旋肋消除應力高強鋼絲。 -
The company ' s main production flexible graphite packing ring, metal winding pads, high - strength graphite composite pad, and all kinds of metal - coated fiber pad category pan - gen, and other sealing products
本公司主要生產柔性石墨填料環、金屬纏繞墊、高強石墨復合墊、金屬包覆墊及各種纖維類盤根等密封產品。 -
Study on high strength low auto - shrinkage concrete with composite aggregate - auto - shrinkage of high strength concrete with composite aggregate
高強低自收縮復合骨料混凝土的研究之二 -
Cfrp tendon is a new composite material manufactured by special technology, it has many advantages such as high - strength, low - density, better corrosion - resistant and so on, so it can potentially replace steel tendons in normal concrete structures and prestressed concrete str uctures, particularly in areas where corrosion is a problem
碳纖維塑料筋是採用特殊工藝製造的新型復合材料，它具有強度高，密度小，耐腐蝕等優點，能夠取代普通混凝土結構和預應力混凝上結構中的普通鋼筋和預應力鋼筋，尤其是在鋼筋銹蝕問題嚴重的地區。 -
Advanced composite is widely used in designing the structure of aircrafts, for it has some excellent performances such as excellent fatigue, high strength and stiffness ratio, etc
先進復合材料比強度、比剛度以及良好的抗疲勞特性等諸多優異性能為飛機結構工程設計實踐廣泛應用。 -
The frp honeycomb sandwich composite materials that has characteristics of light weight, high strength and easily made - up, is now extensively used in fieldwork. when the fieldwork that was made of frp honeycomb sandwich was shallow buried, the structure deformation and the relation between structure and medium under the explosive loading has been researched at present
玻璃鋼蜂窩夾芯復合材料以其輕質高強、易於成型和加工等特點，在野戰工事中正得到廣泛地應用，由該材料成型的野戰工事覆土后，並在爆炸荷載的作用下，結構變形以及結構和周圍介質的關系，目前仍在探索和研究中。 -
As a kind of advanced composite materials, 2d weave structural composites have advantages of capacity to withstand the high temperature, high strength and light mass ; and it can be designed in material and structure to meet the need of the environment. especially it has the potential to be used as the special parts of the aero crafts which are able to withstand the very high temperature
二維編織c sic復合材料作為一種新型高級材料，有其耐高溫、高強度、質量輕等優良特點，並能根據使用環境的要求進行材料和復合結構設計而成為最佳的高溫結構材料的候選者，尤其作為航空航天飛行器需要承受極高溫度的特殊部位結構用材料具有很大的潛力，日益受到人們的廣泛關注。 -
The essay researched the compressive strength, bending strength, impact resistance and abrasion resistance of high strength polypropylene fibermesh concrete the mechanism of enhancing the properties of high strengh poloypropylence fibemesh road concrete composite was discussed and analyzed the regression on tensile strengh with portland cement mixed with fiber was derived using experiment the tensile strength of fiber soil stablization with porland cement was increased with dosage and length of fiber while the former was more effective than the latter test and analysis results indicate that polypropylene fiber can not only reinforce the strength of concrete, but also obviously promote the flexural fatigue life by the great stress the application of polypropylence fiber reinforced concrete in pavement construcion are also introduced
文章研究了不同摻量有機纖維混凝土的抗壓、抗折強度、抗沖及性能、疲勞性能及耐磨性等各種路用性能，綜合論述了有機纖維對水泥混凝土路用性能的影響。通過試驗闡述了纖維水泥混凝土各種路用性能與纖維摻量、長度間的關系。分析表明纖維水泥混凝土隨著纖維摻量和長度增加而增加，且纖維摻量對纖維混凝土抗拉強度的影響比纖維長度的影響更大。 -
Relied on the scientific research fund project of the guangdong communication department : " the application research of high strength concrete in ultra - thin beam bridge ", the double - prestress ultra - thin beam composite structure is presented creatively by my tutor prof. shao xudong in the course of studying the ultra - thin beam bridge
本文依託于廣東省交通廳科研基金項目《高強混凝土在超薄梁橋中的應用研究》 ，本人導師邵旭東教授在超薄梁橋研究過程中創造性的提出了二次預應力超薄梁組合結構。 -
The high - pressure composite vessel usually consists of the inner metal lining and outer winding graphite fiber reinforced plastic with high strength
該復合容器通常由金屬內膽和外層纏繞的高強度纖維增強復合材料組成， 。 -
The rectangular concrete - filled steel tubular ( cfst ) composite structures have the special properties, such as high - strength, good ductility, better seismic behavior, and convenient construction, etc. study on the seismic performance of rectangular concrete - filled steel tubular column to steel beam connections has the important theoretical significance and huge engineering values, and also helps to understand the mechanic behavior and configuration of the connection, to promote the applications of this kind of composite structures in seismic area of china
矩形鋼管混凝土組合結構具有強度高、延性好、抗震性能優越、施工方便等特點。開展矩形鋼管混凝土樑柱節點的抗震性能研究，對于了解節點力學性能，改善節點構造，促進矩形鋼管混凝土組合結構在地震區的推廣應用具有重要的理論意義與工程應用價值。 -
Cu - al2o3 metal matrix composite is widely used as electronic packing material, or electrodes and contact terminals, because of the combination of high electrical and thermal conductivity as well as high strength
Cu - a1 _ 2o _ 3復合材料具有高的強度和高導電性及優良的抗電弧性能，廣泛應用於電子封裝材料、電極和電接觸材料。 -
Fiber reinforced polymer ( frp ) tendon, a new advanced composite material, has many advantages such as lightweight, high strength, corrosive resistance, fatigue resistance, and so on 。 frp tendons can do well with the corrosive problem of reinforcing steel bar in the concrect structure
纖維增強塑料筋（ frp ）是一種新型復合材料，具有輕質、高強、耐腐蝕、耐疲勞等許多優點。 frp能夠很好的解決現在混凝土結構中鋼筋銹蝕的問題，是較為理想的預應力材料。 -
In the few years, the high strength composite nonwoven made of web and filament has been widely used
摘要近年來使用長纖補強而成之高強力復合不織布有逐漸成長之趨勢。
分享友人