hysteretic 中文意思是什麼

From lots of models, this paper chooses seven models - model of mander, model of zhangxiuqin, model of sheikh, model of park, model of saatcioglu, model of fafitis and model of yuanjingen, which express the mechanics capability of confinement concrete perfectly and representatively. the paper modified some incorrect points of the models after studying them and some different hysteretic rules - hysteretic rules of park, hysteretic rules of blakeley, hysteretic rules of mander etc. were added to the models. on the base of above, the models were programmed and added in the program based on the column - beam element of the fiber model

本文從大量的約束混凝土本構模型中篩選出具有代表性的七種模型，即mander模型、張秀琴模型、 sheikh模型、 park模型、 saatcioglu模型、 fafitis模型和袁錦根模型作為考察和研究對象，對部分模型局部明顯不當的地方進行了修改，然後在各模型中添加了不同的滯回規則，包括park滯回規則、 blakeley滯回規則、 mander滯回規則、張秀琴滯回規則、袁錦根滯回規則以及本文提出的滯回規則等，使其能適用於結構地震反應動力分析。

By carrying out the experiment of five pieces of brick masonry walls with pilaster under low reversed cyclic loading, including four pieces strengthened with gfs and one piece un - strengthened, the seismic performance, such as the hysteretic behavior, rigidity degradations deformation and energy - dissipation, are studied systematically

摘要通過1片未加固磚墻體和4片玻璃纖維布加固磚墻體抗震性能的試驗，對墻體的滯回特性、剛度退化性能、變形性能及耗能性能進行系統分析。

For example, the pushover curve analysis has no way to consider the hysteretic energy and the energy dissipation in other ways, and to consider the material fatigue and the scathe in the structures " to - and - fro motion. the work done in this thesis is mainly as follows for trying to make better of the capacity - demand curve in existence : 1. confirm the factors those caused the discrepancy between the different capacity curves : the shape of lateral load distribution, assumption of member bars model, irregularity of the structures, p - effects

為此，本文有針對性地開展了一些工作：闡述了基於性態的設計方法和基於位移的設計方法的相關概念及發展歷程；介紹了幾種現有的能力-需求曲線法的原理及分析步驟並剖析了它們的不足；列舉了影響能力-需求曲線法計算準確性的主要因素，通過算例比較分析它們各自的影響程度從而得出了其中最為重要的影響因素；針對已有的分析結論提出了對現有能力-需求曲線法的改進方案，通過算例分析驗證了改進效果。

The sectionalized linearization method for problem of filtering of bilinear hysteretic structure

雙線性滯回結構濾波問題的分段線性化法

On this basis, sectionalized linearization of bilinear hysteretic structural characteristics and bilinear hysteretic filtering of structural system are put forward

在此基礎上，又提出了雙線形滯后體系的隨機分段線性化法和雙線形滯后體系的隨機分段線性濾波器。

Theoretical model for hysteretic behavior of sma - rubber bearings

橡膠支座滯回性能的理論模型

Based on extensive investigation of construction technique history of chinese ancient buildings, the structure method, structure developing history and seismic behavior of chinese ancient timber structure buildings are analyzed in several respects of the structural system and form. through a series of experiments on constituent parts of chinese ancient timber building structure, including the tests on the corbels and brackets called dougong subjected to low cyclic reversed loadings, the tests on the wooden frame using the tenon - mortise joints as connections of column and beam subjected to low cyclic reversed loadings, the tests on vibration isolation effect of friction and slippage between column footing and their socle base, and a series of shaking table tests on a chinese ancient timber structure palace building mode under artificial earthquake at serving conditions, destroyed conditions and reinforced conditions, many valuable results of structures such as moment - curvature hysteretic loops of dougong structure and tenon - mortise joints under low cyckc reversed loadings, the static function, the seismic performance, energy dissipation, vibration reduction, energy - loss mechanism, nechanicalmode and failure mode were studied. aplenty of valuable parameters of the structure system were obtained, such as the natural period of structure, vibration modes, damping ratio, factor of vibration isolation, oscillate amplitude of ineitial accebration, velocity and displacement, magnitude of slippage, and the mechanism of structure failure and collapse etc. based on these research, the complete analysis of ancient timber structure under earthquake were carried out in which including mechanism analysis method, calculating mode, strength analysis of members and joints, strengthening methods for serving damaged ancient timber structure buildings were also taken into account

依照宋代《營造法式》建造了抬梁式殿堂木結構構件及結構模型，對中國古代木結構中的典型構造如：柱腳在礎石頂面平擱簡支、柱架榫卯連接、柱高不越間之廣、側腳、生起、斗拱等的構造機理及結構功能進行了量化分析和實驗研究： （一）通過木柱石礎靜摩擦試驗，測定了柱腳與石礎古鏡面間的摩擦系數及摩擦力隨上部結構荷載變化的規律； （二）通過單柱承載力試驗，測定了古建築中木柱的受力變形特徵、破壞模式、及模型材料的變形模量、極限承載力、極限變形等參量； （三）通過柱架低周反復荷載試驗，測定了柱架的抗側移剛度、柱架恢復力特性及滯回曲線、榫卯張角剛度及其變化規律、柱架及榫卯的極限承載力和極限變形、及榫卯減振參數； （四）通過斗?低周反復荷載試驗和受壓試驗，測定了古建築木構件與木構件間摩擦系數，斗?抗側移剛度，斗?恢復力特性及滯回曲線，斗?抗壓極限承載力及受力變形規律； （五）通過抬梁式殿堂間架模型振動臺試驗，測定了殿堂木構架結構自振周期，地震反應振形、阻尼特性及阻尼比；按結構分層特點對柱腳、柱頭和斗?層上的屋蓋的地震反應採用多點同步測量，對柱根滑移、榫卯變形、斗?的變形、復位、耗能減振參數等進行了定量分析。

The damage performance - based aseismatic design method can calculate distortion and dissipating hysteretic energy under seismic action, and form intuitionistic aim matrix of damage performance by damage index

基於地震損傷性能的設計方法考慮了地震作用下結構的變形和累積耗能，並將性能量化為損傷指數，形成直觀的損傷性能目標矩陣。

S. consideration of interaction on the nonlinearity about the material, the geometry, and the boundary of the columns subject to axial force. biaxial hending, and torsion, an analytical model of hysteretic curve of columns is presented, based on the sectional cross - sectional discrete yieldsurface inodel, the bond slip in anchorage zones regarded as the boundary nonlinearity of a memher. and the iterative procedure of displacement of inner nodes on the basis of the hamonization of displacement

5 、根據構件分段截面離散的屈服面模型法，把錨固區粘結滑移看成構件的邊界非線，以及基於位移協調的內結點位移迭代法，建立了能考慮構件壓（拉） 、雙彎、扭的材料、邊界、幾何非線性相互影響的柱空間滯回曲線分析模型。

A novel low mechanical hysteretic ceramic capacitive pressure transducer has been made, by using of ceramic sealing technology ; integrate circuit ( ic ) technology and thick film plane fixing circuit technology. this transducer is made of a deformable ceramic diaphragm and a ceramic base plate, between which has an air cavum. a coaxial gold electrode was fired onto the diaphragm and the base plate

本文利用新型陶瓷技術、集成電路技術和厚膜平面安裝電路技術，採用零力學滯后的陶瓷和陶瓷密封材料進行設計製造了一種非充液乾式的電容式壓力傳感器，該壓力傳感器由較厚的陶瓷基體和較薄的陶瓷膜片構成，中間形成一空氣介質腔，在基座和膜片之間內置同軸的雙電極，組成兩個電容，當膜片承受壓力時發生位移，使電容量產生變化，經後置處理電路直接轉換為可輸出的直流電壓信號。

The bouc - wen differential equation model is used in modeling the hysteretic characteristics of these components. the pem ( pseudo excitation method ) combined with the elm ( equivalent linearization method ) is used to analyze the non - linear random vibration of such structures

採用bouc - wen等提出的微分方程模型描述進入非線性構件的滯變特性，運用虛擬激勵法結合等效線性化進行結構非線性隨機振動分析。

Through studying the working mechanism of the composing, the paper referred the bearing ' s analyzing model and designing flow. through shearing test of high damping rubber, the paper analyzes the influence of shearing shape, shearing strain range and inspiriting frequence on the characteristic parameters ( dynamic shear elastic module, dissipation engineering module, wasted gene ). according to the rule of equivalent energy, the paper gets the hysteretic curve of hdr ' s equivalent bilinear model and parameters ' calculating formula

本論文通過對這種分離式減震支座各組成部分工作機理的研究，提出了該分離式減震支座整體的計算分析方法和設計流程；通過高阻尼橡膠剪切試驗，分析了高阻尼橡膠剪切面形狀、剪應變幅值、激勵頻率和試件高度對特徵參數（動態剪切彈性模量、耗能模量、損耗因子）的影響。

Its hysteretic curve is plumper, its ductility coefficient and energy dissipation capacity have been improved remarkably. the inclined staff of the steel bar truss has a restraining faction to the development of the crack, and the phenomena is that there has more crak and larger distributing area on the shear wall, which is an important token of the improved seismic capacity. concealed steel bar truss has the faction of increasing the height of plastic hinge area, which is another important token of

研究結果表明:內藏鋼桁架高剪力墻與普通高剪力墻相比:屈服荷載和極限荷載均比顯著提高;屈服剛度明顯提高;其滯回環相對飽滿，延性系數及耗能能力顯著提高;內藏鋼桁架高剪力墻，其鋼桁架斜桿對裂縫發展有控製作用，現象是墻體上的裂縫較多、分佈域較廣，這是抗震耗能能力增強的重要表徵;內藏鋼桁架高剪力墻有增大底部塑性耗能區域的作用，這是抗震耗能能力增強的另一重要表徵;內藏鋼桁架還有顯著提高抵抗剪力墻基地剪切滑移能力的作用。

According to hysteretic properties under low - cyclic loading and some other suggestions, the moment - curvature restoring force computation model of unbonded partially prestressed concrete section, which considering the ppr, is given

此外由於施加了預應力，使得該結構具有良好的恢復力特性。本文還根據試驗結果和相關參考文獻提出了考慮不同預應力度的預應力扁梁截面彎矩?曲率恢復力計算模型。

Based upon the experimental study, the stiffness and its attenuation, bearing capacity, ductility, hysteretic property, energy dissipation and failure phenomena of each shear wall with different design parameters are contrastively analyzed and the seismic mechanism of this new shear wall has been opened out

對各不同設計參數剪力墻的承載力、剛度及其衰減過程、延性、滯回特性、耗能能力和破壞特徵等進行了較系統的分析，揭示了其抗震機理。

Based upon the experimental study, the stiffness and its attenuation, bearing capacity, ductility, hysteretic property energy dissipation and failure phenomena of each shear wall with different design parameters are contrastively analyzed and the seismic mechamism of this new shear wall has been opened out

通過試驗，對各不同設計參數剪力墻的承載力、剛度及其衰減過程、延性、滯回特性、耗能能力和破壞特徵等進行了較系統的分析，揭示了其抗震機理。

The aseismatic behaviors of the two frames are analyzed and compared, with emphases on failure mechanism, hysteretic property, displacement ductility, energy - dissipation capacity as well as stiffness degeneration, etc, to find the influence of steel - fiber concrete to the aseismatic behaviors of the prestressed concrete flat - beam frame structures

計算機模擬模擬結果和試驗結果的比較發現，在框架的開裂破壞形態、極限承載力等方面基本吻合。該研究成果可為扁梁框架結構體系的設計和有關規范的增補提供依據，具有很好的應用前景。

The low - cyclic reversed loading tests of two unbonded partially prestressed concrete frames with different ppr have been carried out. the aseismic behaviors are analyzed and compared, with emphases on failure mechanism, hysteretic property, displacement ductility, energy - dissipation capacity as well as stiffness degeneration, etc. the results show, when designed rationally, the unbonded partially prestressed concrete frames can form beam hinge energy - dissipation machine and total destroy mechanism

通過兩榀不同預應力度的無粘結部分預應力混凝土扁梁框架結構的低周反復荷載試驗，分析研究了無粘結部分預應力混凝土扁梁框架結構的破壞形態、滯回特性、位移延性、耗能能力、承載力及剛度退化等抗震性能。

Regarding the hysteretic properties and time - varying of the system, the scan round performance of the controller, adopt incremental pid algorithm in constant - pressure controlling and combine it with the integral - separated dead - zone algorithm as appropriate for the situation of the measuring system and applies fuzzy self - tuning to control pid controller parameters

由於系統的滯后時變性和控制器的循環掃描工作方式，恆壓控制採用增量式pid控制演算法，結合測量系統實際情況加入積分分離帶死區改進演算法，並對pid參數進行模糊自整定控制，設計了一種參數自整定模糊pid控制器。

Based on the model experiment of 9 normal - strength concrete specimens and 12 high - strength concrete specimens in this case, the hysteretic property and seismic performance of normal - strength and high - strength concrete frame column are analyzed, and factors that affect the seismic performance of combined torsion member are also studied. in this paper, seismic performances of reinforced concrete members are discussed

在9根普通混凝土、 12根高強鋼筋混凝土框架柱在雙向壓彎剪反復扭矩復合作用的模型試驗研究的基礎上，對普通和高強混凝土框架柱的抗震特性和滯回特性進行了分析，研究了各影響因素對鋼筋混凝土復合受扭構件抗震性能的影響。