impact tensile strength 中文意思是什麼

impact tensile strength 解釋
沖還拉強度
  • impact : n 碰撞；沖擊（力）；（火箭的）降落[著陸]；【軍事】彈著；影響，效力。 The point of impact彈著點。 ...
  • tensile : adj 張力[拉力]的；抗張的；能伸長的。 tensile force 【物理學】張力。 tensile strain 【物理學】張應...
  • strength : n. 1. 力，力量，體力。2. 強度，濃度；長處；（要塞等的）抵抗力。3. 實力；兵力；全體人數，額定人數，編制。4. 筆力；文勢。5. （證券等的）市價堅挺。6. 〈美俚〉（可能有的）利潤。
  1. With the filling of diabase, the mechanical properties of the composite increased first and then decreased with a top tensile strength of 56. 5mpa and a top impact strength of 70. 1mpa. these illuminated that the diabase fiber reinforced pvc composites could be used as structure materials

    復合材料的力學性能隨著輝綠巖的增加先升后降，復合材料拉伸強度最高可達56 . 5mpa ，復合材料沖擊強度最高可達70 . 1mpa ，說明輝綠巖纖維增強pvc復合材料作結構材料使用。
  2. The results from x - ray diffraction demonstrated that pp / mmtome was a fully intercalated nanocomposite, pp / mmtom and pp / ommt were partly intercalated nanocomposites, but the intercalation effect of pp / mmtom nanocomposite was better ; the crystallization characteristics of pure pp and pp / mmt nanocomposites were investigated by dsc, waxd and pom. the result of these testing showed that mmt nano - layers acted as nucleating agents for the crystallization of pp, the addition of mmt had effect on the crystallization process, leading the increasing of crystallization temperature crystallization rate and crystallinity, but also the dimension of spherulite reduced. but the formation of pp crystal did n ' t change, the formation of pp crystal in three pp / mmt nanocomposites and pure pp were a - form on the whole ; influences of three sorts of mmt on mechanical properties of pp / mmt nanocomposites were studied, as a result, the addition of mmt comprehensively improved mechanical properties of pp : notched impact strength, tensile strength and flexural properties were all increasing, but the extent of increasing were n ' t large

    通過xrd分析比較這三種pp mmt納米復合材料微觀結構得到， pp mmt _ （ ome ）屬于完全插層， pp mmt _ （ om ）與pp ommt的插層程度相近，但是pp mmt _ （ om ）相對較好；通過對純pp和三種pp mmt納米復合材料的結晶性能研究發現，蒙脫土納米片層對pp結晶產生明顯的異相成核作用，結晶能力增強，使pp的結晶溫度和結晶速率提高，結晶度增加，球晶晶粒細化，但是沒有改變pp的結晶形態，三種pp mmt納米復合材料的結晶形態都屬于晶；通過對pp mmt納米復合材料的力學性能測試得知，蒙脫土的加入全面提高了pp的力學性能，缺口沖擊強度、拉伸強度和彎曲性能都有一定程度的提高，浙江{ _業大學碩十學位論文摘要但是提高幅度都不是很大，不過ommt 、 mmtom和mmtc ） me三種蒙脫土對pp力學性能有著不同的改性作用，其中pp / mmtom最好， pp月邊mto崛次之， pp / ommt最低，這種情況主要是由蒙脫土對pp結晶性能的影響和蒙脫土的納米改性作用造成的。
  3. The mechanical tests result showed that when the mmt content is 2 % and the compatilizer content is 15 %, the pmc has best mechanical property. the izod impact strength is 16. 45 kj / m2 and the tensile strength is 35. 77 mpa, increasing 280 % and 4. 3 %, compared with pure pp. the pom photo indicated that the o - mmt can reduce the scale of spherical crystal of pp

    以am為插層劑得到的聚丙烯蒙脫土納米復合材料中，蒙脫土保持剝離狀態，但力學性能不理想，當土含量為0 . 5時，材料的沖擊強度為9 . 58kj m ~ 2 ，拉伸強度為25 . 5mpa 。
  4. Products function : put our “ sun shine ” brand carbon steel fiber evenly seep into concrete to form steel fiber reinforced concrete and it can decrease the thickness of reinforced concrete by half, it not only shorten the project time, save the material and manpower expense, bring distinct economic benefit, but also increase the performance of crack resistance, percussion resistance, tensile strength, bend resistance. scosspr resostamce amd wear resistance of the reinforced base materials. if the weight ratio of 2 % steel fiber seep into the concrete, it can solve the brittleness problem of the concrete, in the condition of 60 % ralative air humidity, after 21days air - dry, even 520 days air - dry, it ' s difficult to find any crack by eyesight, the bend resistance for the steel fiber concrete is 140 times stronger than the concrete without steel fiber, the capability of impact resistance increase 10 times

    產品功能：將本公司「雙興」牌碳鋼纖維系列產品均勻地摻入混凝土中，形成鋼纖維增強混凝土，可使工程中鋼筋混凝土的施工厚度降低一半，不僅縮短了施工工期，節省了材料和人工費用，帶來顯著的經濟效益，且增強了基體的抗裂、抗沖擊、抗彎、抗剪、耐磨擦等性能，如摻入本公司2 %鋼纖維的混凝土，不僅解決了混凝土的脆性問題，在空氣相對濕度60 %的條件下風干21天後，甚至在風干520天，肉眼很難發現裂縫，摻入鋼纖維后的增強混凝土比不摻鋼纖維的混凝土抗彎強度提高140倍，耐沖擊荷載提高10倍。
  5. The results show that the tensile strength and rupture strength of furan polymer concrete were improved when the durafiber was used ; and durafiber pretreated by wd - 60 silane coupling agent can enhance the strengths ( the tensile strength, rupture strength and impact toughness ) greatly,

    結果表明：在呋喃樹脂混凝土（砂漿）中加入杜拉纖維，可提高其抗拉強度、抗折強度和沖擊韌性；經硅烷偶聯劑wd - 60處理后的杜拉纖維對其抗拉強度、抗折強度有大幅度提高。
  6. At the same time, the impact and tensile strength enhanced adding nanocrystal pvc. scanning electron microscopy was utilized to observe the structure of nanocrystalline pvc

    利用掃描電鏡觀測了破碎所得納米晶pvc的結構，結果顯示破碎pvc粒子產生片狀結構。
  7. Special new outer plate construction with strong impact resistance force, high rigidity and high tensile strength design of tank chain, providing better outer plates performance than traditional ones

    全新特殊結構外鏈片設計、具有強化抗沖力、高鋼性、高拉力多元性能設計坦克鏈、並具有高於傳統外鏈片性能、特性。
  8. Compared with pure pmma, the thermal and mechanical properties of the nanocomposites are obviously improved at a very small amount of mmt ( ommt ) loading. the tgs of the composites via different methods are improved by 10 ~ 26 ?, the decomposition temperatures at weight loss of 5wt % are increased by 42 ~ 99 ?. in the bulk system, tensile strength, tensile modulus and impact strength are improved by 32. 2 %, 60. 3 % and 68. 6 %, respectively, without the loss of light transmittance

    相對于純pmma體系，懸浮法、乳液法及本體法復合材料的t _ g值提高了10 26 ；后兩種復合材料熱失重5wt的溫度提高了42 99 ；而本體法復合材料的拉伸強度、拉伸模量及沖擊強度值最大分別提高了32 . 2 、 60 . 3和68 . 6 ，而透光性能基本未受影響。
  9. Second, many mechanical properties are tested, for example, tensile strength and tensile modulus, flexural strength and flextural modulus and impact strength. by the analysis of the tensile stress - strain curves and the flexural stress - strain curves, the results are as follows : 1 ) the voluminal content of fibre of composite making by vacuum assistant resin injection is more than other composites. 2 ) the mechanical properties of the needlepunching nonwoven fabric reinforced polymer composite are superior to these of the calendering nonwoven fabric reinforced polymer composite

    首先，採用不同的增強材料（針刺非織造布和熱軋非織造布） 、不同的基體材料（ 961樹脂和306樹脂）和不同的成型工藝方法（手糊法、真空袋法和真空輔助成型法）製造出了一系列非織造布增強復合材料，然後對它們的拉伸強度、拉仲彈性模量、彎曲強度、彎曲彈性模量和沖擊強度等力學性能進行了測試，並分析了它們的拉伸載荷? ?位移曲線和彎曲載荷? ?位移曲線，結果表明真空輔助成型工藝能大大提高纖維的體積含量；針刺非織造布增強復合材料各項力學性能優于熱軋非織造布增強復合材料。
  10. Based on the characteristics of silicon whisker, the research on the modification of pa6 by silicon whisker sio2 - jx was made, and the result showed that the tensile strength, impact strength, brinell hardness, and heat resistance increased with the increase of the content of the whisker ; sio2 - jx could replace short glass fiber in the modification of pa6, improving the heat distortion temperature, removing the appearance of glass fiber, reducing shrinkage and the cost

    摘要利用晶須矽纖維狀的特性，對其填充于龍玻纖改性進行研究，結果表明，隨晶須用量的增加，材料的拉伸強度、沖擊強度，布氏硬度、耐熱溫度均得到提高；晶須矽可取代短玻纖使用，提高熱變形溫度、消除玻纖外露，降低收縮率及生產成本等。
  11. The method blending with rigid inorganic filler can improve tensile strength, while lowering impact strength of blends. so, the critic prohlem is how to increase impact strength and tensile strength simultaneously. recently hybrids of pp / clay but melting interca1ation method have been studied, and the results show that higher impact strength is obtained, while tensiie strength lost less

    改善pp韌性的常用方法是與橡膠或彈性體共混復合，但在提高材料韌性的同時，拉伸強度損失嚴重；若用無機填料來改性pp ，材料的拉伸強度得到提高，但韌性下降較大，故提高即的韌性和拉伸強度似乎成了一對矛盾。
  12. The essay researched the compressive strength, bending strength, impact resistance and abrasion resistance of high strength polypropylene fibermesh concrete the mechanism of enhancing the properties of high strengh poloypropylence fibemesh road concrete composite was discussed and analyzed the regression on tensile strengh with portland cement mixed with fiber was derived using experiment the tensile strength of fiber soil stablization with porland cement was increased with dosage and length of fiber while the former was more effective than the latter test and analysis results indicate that polypropylene fiber can not only reinforce the strength of concrete, but also obviously promote the flexural fatigue life by the great stress the application of polypropylence fiber reinforced concrete in pavement construcion are also introduced

    文章研究了不同摻量有機纖維混凝土的抗壓、抗折強度、抗沖及性能、疲勞性能及耐磨性等各種路用性能，綜合論述了有機纖維對水泥混凝土路用性能的影響。通過試驗闡述了纖維水泥混凝土各種路用性能與纖維摻量、長度間的關系。分析表明纖維水泥混凝土隨著纖維摻量和長度增加而增加，且纖維摻量對纖維混凝土抗拉強度的影響比纖維長度的影響更大。
  13. The results show that, with the quenching temperature ( 270 ~ 380 ) increasing, the carbon content and percentage content of retained austenite increase first and then decrease, which are up to a maximum value at 360 ; the tensile strength of adi decreases ; the elongation and impact ductility of adi increase first and then decrease, which are up to a maximum value at 360 ; but the hardness of adi decreases first and then increases, which is up to a minimum value at 360

    結果表明，在試驗溫度范圍內（ 270 ~ 380 ） ，試樣中殘余奧氏體的含碳量及其含量隨著等溫淬火溫度的升高先增大后減小，均在360等溫淬火時出現最大值；抗拉強度隨著等溫淬火溫度的升高而逐漸降低；伸長率和沖擊韌度隨著等溫淬火溫度的升高先增大后減小，在360等溫淬火時出現最大值；硬度則隨著等溫淬火溫度的升高先減小后增大，當360溫淬火時硬度最低。
  14. The results showed that polyacrylate / caco3 is better dispersed in the pvc matrix. the notched impact strength of pvc and polyacrylate / caco3 blends is improved obviously. and the tensile strength of the blend has significantly unchanged

    Pba - pmma caco _ 3粉末與pvc共混后能較好地分散在基體pvc中，並能明顯提高共混材料的缺口沖擊強度。
  15. The results showed that the notched impact strength of pvc / acr blends was improved remarkably and the tensile strength and the flexural strength of the blends have not obviously changed. the notched impact strength of pvc / acr blends was increased to about 3 times more than the pure pvc when the ratio of pvc / acr is 100 / 6 ( wt )

    結果表明，所合成的acr和pvc共混后能提高pvc的抗沖擊性能，並呈現明顯的韌性斷裂特徵，而材料的拉伸性能和彎曲性能下降不大，當pvc acr = 100 6時，共混體系的缺口沖擊強度較純pvc提高3倍多。
  16. Compared to pure up, the tensile strength and impact strength of nanocomposites with about lwt % organic montmorillonite increase by 20 % and 100 %, respectively

    在有機蒙脫土加入量在1wt左右時，復合材料的拉伸強度提高了約20 ，抗沖擊強度提高約1倍。
  17. Through the characterization of the molecular weights of pam, sem and dsc of composite, the results clarified the change of mechanical properties of composites. the tensile strength and impact strength of pam2 / pa - 6 composite showed that were related to the content of initiator naoh for the polymerization of e - caprolactam. the intrinsic viscosity of pam, sem and the crystallinity of nylon phase carried out the results, which explained the change of mechanical properties of composites

    對于pam2 pa - 6體系，復合材料的拉伸強度與沖擊強度隨醛胺摩爾比的變化趨勢與引發劑用量有關，通過pam2分子量、尼龍結晶度、球晶形態、 sem以及dsc等表徵方法對這種變化趨勢的研究表明，復合材料的力學性能與上述因素有密切的關系。
  18. The izod impact strength was increased 48 % and the tensile strength was increased 12 % contrast with pure pp, achieved the highest value when 3 % nano - sio2 by weight modified with silicone coupling agent and pp - g - mah was added

    加入3納米sio _ 2粒子，復合增容劑5份時復合材料力學性能最佳，相比純pp其沖擊強度提高48 、拉伸強度增加12 。
  19. 434 we shall take the sample to test its physical properties ( mechanical properties, tensile strength, yield point, percentage elongation, reduction of area, impact value, brinell hardness )

    我們將取樣試驗其物理性能（機械性能、抗張強度、屈服點、延伸率、斷面收縮率、沖擊值、布氏硬度） 。
  20. The result showed with the increase of the acrylonitrile content, the density, tensile strength, and bending strength of the copolymer increased at the same time, while the impact strength, vicat softening temperature and hardness of the copolymer changed little

    結果表明，共聚物中丙烯腈含量增加，共聚物的密度、拉伸強度和彎曲強度均相應地提高，而沖擊強度、維卡軟化溫度及硬度變化不明顯。
分享友人
分享到 Line

分享到臉書