low-temperature sintering 中文意思是什麼

low-temperature sintering 解釋
低溫燒結
  • low : adj 1 低的;淺的,矮的。 low flight 低飛。 a low temperature 低溫。 low tide [water] 低潮。 The g...
  • temperature : n. 1. 溫度,氣溫。2. 體溫。3. 〈口語〉發燒,高燒。
  1. The influence of burning system on the properties and structure of the ceramic capacitors has been studied under the certain temperature system, the optimum sintering temperature of the ceramics was primarily decided by the content of bi2o3 ? 3tio2. the sintering temperature dropped with the adding of bi2o3 ? 3tio2. at the range of suitable sintering temperature, slow heating and low temperature sintering can obtain fine grain and dense structure. it results in the improving of the breakdown voltage for the middle - high voltage ceramic capacitors

    研究了燒成工藝制度對電容器陶瓷性能和結構的影響,結果表明:在一定的升溫保溫時間下,瓷料的最佳燒結溫度主要取決于組成中bi _ 2o _ 3 ? 3tio _ 2的含量, bi _ 2o _ 3 ? 3tio _ 2含量的增加將降低燒結溫度;在合理的燒結溫度范圍內,慢速升溫和低溫燒結將有利於得到細晶緻密結構,從而改善中高壓陶瓷電容器的耐壓強度。
  2. The expansion and dehiscence behavior during the vacuum reactive sintering below 660 of compact ti / al composite powders was experimentally investigated, and the reasons of expansion and dehiscence were theoretically analyzed. the method of low temperature reactive sintering was generalized, and the experiment testified the method effective. the rule of the expansion of the billets was generalized from the result of density of the billets

    低溫反應燒結工藝:研究了高能球磨ti / al復合粉體在溫度低於660下真空無壓反應燒結過程中的膨脹和開裂行為,分析了產生膨脹和開裂的主要原因;並提出了能夠有效預防坯料開裂的方法;通過測定坯料在低溫燒結后的密度,總結了其體積膨脹的規律;通過x射線衍射技術分析了隨球磨時間不同,金屬間化合物的生成情況。
  3. The high vacuum encapsulation of field emission display was realized with low - melting - glass encapsulation technology and high - temperature sintering process

    摘要通過採用低熔點玻璃封接技術和高溫燒結工藝,實現了穩定可靠的場致發射平板顯示器高真空封裝。
  4. The experimental data has been used to validate pdm and low temperature sintering mechanics. the advantage and disadvantage of pdm have been discussed also. for the first time, the pdm is used to study the low temperature sintering mechanics of uo _ 2, and the research results indicate : 1

    3 、基於燒結頸長大速率與緻密化動力學方程得出,影響二氧化鈾低溫燒結的因素有原始粉末粒徑、粉末堆積方式、坯塊原始密度、燒結溫度、燒結時間、燒結氣氛等;粉末壓坯一定時,燒結溫度、燒結時間和燒結氣氛就成為控制低溫燒結的關鍵因素。
  5. The liquid synthesis of nanocrystals titania at low temperature, due to avoiding the sintering process, brings superior physical and chemical properties

    低溫液相合成晶態納米二氧化鈦由於避免了高溫煅燒過程,可望賦予其更優越的特性。
  6. And the feasibility, necessary condition, affecting factors and densification process of low temperature sintering of uo _ 2 have been discussed

    2 、計算發現,溫度一定時x與氧分壓的1 / 6次方成比例。
  7. But there is a few findings in the study of low temperature sintering, which cries for more efforts putting into the mechanical study of low temperature, to find a method for technology promoting and enrich the known activation sintering theory

    然而國內外在低溫燒結機理方面的成果乏善可陳,這就迫切需要加大對低溫燒結機理研究的力度,為工藝提升找到一條路,並且豐富已知的活化燒結理論。
  8. Using continuous compacting progress dy2o3 / zro2 materials can be sintered at low temperature. 98. 8 % of theory density was obtained for ultrafine dy2o3 / zro2 ceramic power sintering at 1200, which is 400 lower than the sintering temperature of the common ceramic power. it studied the influence of sintering temperature on the crystalline grain of power by sem

    採用二次成型常壓燒結法對氧化鋯/氧化鏑的納米粉體進行燒結,在1200左右燒結得到燒結密度為理論密度的98 . 8的陶瓷體,其燒結溫度比常規陶瓷粉末的燒結溫度低四百度左右,通過掃描電鏡研究了燒結溫度對燒結體晶粒大小的影響。
  9. ( 2 ) the oxygen - rich spinel material from sintering the precursor at low temperature changed into perfect spinel structure due to releasing the excess oxygen when raised the sintering temperature slowly, which caused the lattice expanded and at the same time the system energy lowered and the bonding energy raised, and tansformed into the stoichiometric limn2o4 at 700

    ( 2 )低溫燒結合成的材料為富氧型尖晶石材料,隨著溫度的升高,結構中多餘的氧逐漸釋放,系統能量降低,結合能增加,品格發生膨脹,樣品向完整的尖晶石結構逐漸過渡。 700得到的材料為化學量的limn _ 2o _ 4 。
  10. To utility the low temperature sintering industry, some discoveries must be found in the mechanism of low temperature sintering. otherwise, the study of technology will be faced with bottleneck

    要想將低溫燒結工業實用化,就必須在低溫燒結機理上有所發現,否則工藝的研究將面臨瓶頸。
  11. In this paper, the alumina ceramic was prepared under normal pressure and low temperature, the mechanical properties, micromorphology, microstructure of grain boundary and phase composition of the alumina ceramic, and the precision shaping and cold processing of the femoral head were systematically studied ; the effects of the additives, the relation between microstructure and mechanical strength, the sintering mechanism of the material and the influence factors of the structure and properties of the alumina ceramic were discussed also

    本文在常壓低溫條件下制備了氧化鋁陶瓷,系統研究了氧化鋁陶瓷材料的力學性能、微觀形貌、晶界顯微結構、相組成和股骨頭的精密成型、冷加工,並討論了添加劑的作用、材料顯微結構與力學強度的關系、材料的燒結機理及影響氧化鋁材料結構與性能的因素。
  12. Aiming at the object of low - temperature sintering the low coercively lizn ferrite, the conventional ceramic process and sol - gel process were studied in this paper

    論文圍繞低溫制備低矯頑力lizn鐵氧體這個目標,對氧化物陶瓷工藝與溶膠-凝膠工藝分別進行了研究。
  13. P. durh, m. villegas, f. capel, p. recio & c. moure, “ low - temperature sintering and microstructural development of nanocrystalline y - tzp powders ”, j. eur. ceram. soc., 16, 945 ( 1996 )

    澎信文,添加微量氧化鋁對于氧化鋯陶瓷材料制備與燒結行為之研究,材料年會論文集, ( 2005 ) 。
  14. Research on low temperature sintering and piezoelectric properties of pmn - pt relaxor ferroelectric ceramics

    弛豫鐵電陶瓷的低溫燒結與壓電性能
  15. Pmn - pzn - pfw - pzt polynary system piezoelectric ceramics low - temperature sintering

    多元系統壓電陶瓷低溫燒結
  16. Through the research of the present stage, the researching results can provide the reference for low - temperature sintering the low coercively lizn ferrite which is important to improve the performance of microwave ferrite for phase shifter

    通過現階段的研究,可為低溫制備低矯頑力lizn鐵氧體材料提供工藝技術參考,對于改善微波移相器用鐵氧體材料性能有重要的作用。
  17. Studying the process of low - temperature sintering the low coercively lizn ferrite is important to optimize the performance index of phase shifter, improve the consistency of amplitude and phase, reform the process capability of material and increase the yield of microwave devices

    研究低溫制備低矯頑力lizn鐵氧體工藝技術對于提高我國微波移相器性能指標,改善幅相一致性;改變當前材料加工困難、器件成品率低的狀況有重要的意義。
  18. Firstly, the paper studied the dual effects of v2o5 in zno - v2o5 varistor ceramics during low temperature sintering. the binary varistor ceramic samples of v2o5 filled with zno at 2. 5 10 - 3mol were prepared, the valence of v ion was studied by esr ( electron spin resonance )

    本文首先研究了v2o5在zno ? v2o5壓敏陶瓷低溫燒結中的雙重作用,制備了v2o5含量為2 . 5 10 - 3mol的單組元zno壓敏陶瓷,採用電子自旋共振譜( esr )研究了v2o5中v離子的價態變化。
  19. Liquid phase sintering nano - zirconia toughened dental all - ceramics at low temperature

    低溫液相燒結納米氧化鋯增韌口腔全瓷材料的研究
  20. Advances in research on low temperature activated sintering technology of pzt piezoelectric ceramics

    壓電陶瓷低溫活化燒結的研究進展
分享友人