machine equation 中文意思是什麼

machine equation 解釋
計算機運算方程式
  • machine : n 1 機（器），機械；機關，機構。2 印刷機器；縫紉機；打字機；汽車；自行車；三輪車；飛機；〈美俚〉...
  • equation : n. 1. 平衡，均衡；平均，相等。2. 【數學】方程式，等式。3. 【天文學】（時）差；均分，等分。4. 【化學】反應式。
  1. The effect of cutting speed, cutting thickness, cutting knife and materials on the working power capacity is discussed. finally tractive property of road plane milling machine is also studied. through the comparison of the results of theory calculation and experimental results the equation of working power capacity of milling machine is modified

    本文對冷式瀝青路面銑刨機的動力學工作過程進行了理論分析與試驗研究，並利用金屬材料切削的基本原理，研究了主切削力，並從能量轉化守恆的角度推導了銑刨機銑刨作業阻力和功率計算公式，討論了機器切削速度、銑刨厚度以及刀具與材料特性對銑刨作業阻力和功率的影響規律，最後討論了銑刨機牽引性能，且通過試驗研究驗證了銑刨作業阻力和功率公式。
  2. After generalizing the characteristic of modern equipment, the mission of equipment management and general situation of chinese equipment management, basied on two forms of equipment management - - - - - - practicality & value, the author combined quantitative & qualitative methods with example to analyze and discuss questions, especially the reasonable update & depreciation, accordingly achieving the optimization of the technical efficiency & economic benefit 0 one of emphases of the thesis is methods application of equipment reasonable update, that is starting with economic benefit to looking for reasonable using fixed number of year. the thesis used inferior - converted numeric method and rate equation which based on the theory square and combined with harbor loading machines & tugboat ' s actual facts, calculated the economic life of the same machine in order to make sure harbor machines " reasonable using fixed number of year. at the same time, the author made use of midpoint value regress method and stochastic trapeziform forecast method to calculate and analyze and gain the reasonable conclusion o the other emphases is questions of harbor equipment

    本文概括介紹了現代設備的特點、設備管理的任務以及我國設備管理發展的概況后，作者從設備經濟管理的兩種形態? ?實物形態和價值形態出發，採取定量與定性相結合，以定量為主，結合實例進行分析與論述，對港口設備的合理更新與折舊問題進行了著重研究，從而實現設備的技術效能和經濟效益的最優化。本文研究的重點之一是設備合理更新的方法應用，即從經濟效益出發，來尋求設備的合理使用年限。本文結合港口裝卸機械和港作拖輪的實際，運用以正方形理論為基礎的低劣化數值法和費用方程兩種方法，計算了同一種機械設備的經濟壽命，從而確定港機合理的使用年限，同時，運用了中點值回歸法和隨機梯形預測法進行計算和分析，得到了合理的結論。
  3. Abstract : the shaping equation of steamed bread in circular trough camber of shaping roller, the instantaneous velocity of its surface, and the strength by shaping roller were analyzed during shaping, then a theory base for the design of steamed bread shaping machine was provided

    文摘:分析了饅頭成型過程中成型輥上圓弧槽曲面內饅頭生坯的運動方程，饅頭表面動點瞬時速度及饅頭成型時受力分析，為饅頭成型機的設計提供了理論依據。
  4. The research aims at the demonstration and the mend of the design on the new purifier and presents a calculation method for solving the two - phase flow in fluid machine by the finite element method. after analyzing the two - phase flow in the new purifier by means of the continuum model, poisson equation, navier - stokes equation and continuous equation are derived and solved by using the finite element method. the solution on pressure, velocity and particle concentration simulates the departure well between oil and water, which proves the accuracy of the design on the new purifier

    本文採用兩相流連續介質模型，由兩相分離流動理論得到控制方程，採用chorin的直接速度-壓力mac法的思路，對新型油水分離裝置內油水兩相流動作了細致的分析，同時首次把科氏慣性力引入兩相流模型中，進行分析和計算，將研究擴展到三維，並用有限元法分別解poisson方程、 n - s方程、連續方程的方法，對流場內壓力場、速度場、濃度場進行了分析和計算，較好地模擬了新型油水分離裝置內油水分離的現象，證明了設計方案的正確性。
  5. The new sprocket, manufactured by means of this equation, can improve the logistic movement of the pallet cars, reduce the impact and establish the foundation of producing archless sintering machine

    利用該方程製造的新型星輪能夠改善臺車的邏輯運動，減小沖擊，為製造無起拱燒結機奠定了基礎。
  6. The acceptability our rejection and the depiction of some content in the course " mechanisms and machine theory " is discussed, ( e. g., group dividing, solving steps of the graphical method for vector equation, versions and methods for analytical kinematic analysis, inversion design for linkage mechanisms, crank angle between the two limiting positions, design formulae for cam mechanisms, classification of combined mechanisms, formula of the radius of addendum circle of gear, balancing of machinery, etc. ) and some new opinions are presented

    摘要就《機械原理》課程的某些內容（如：拆桿組的方法、矢量方程圖解法的解題步驟、運動分析解析法的版本和方法、連桿機構的反轉法設計、極位夾角、凸輪機構設計公式、組合機構的分類、齒輪齒頂圓半徑公式、機械的平衡等）的取捨和敘述進行探討，提出一些新的看法。
  7. The error compensation software for cam precision grinding has been developed, and results show that the cam grinding accuracy can be ensured and the productive can be improved. ( 1 ) by using the method of movement error analysis of mbs, the geometric error model of sk - 21 nc machine tool has been established, and the calculation equation for precision processing of nc machine tool has been derived, which lays a good foundation of programming the error compensation software

    基於該磨床目前的狀態和已有的研究成果，本課題展開了以下主要研究工作: （ 1 ）以多體系統運動學理論為基礎，建立精確的sk - 21數控凸輪磨床運動模型，全面考慮各項結構誤差和運動誤差對加工精度的影響，推導出精密加工約束條件方程，揭示機床實精密加工的實質。
  8. The purpose of this subject was solving the problem of separation on working face. it can provide feasible source for separating coal and waste and some data for the choice of machine by researching the characteristics of waste rock and charcoal, i found a way to separate irregular waste rock from charcoal. by researching the strength of the irregular rock, got a strength equation for it and decided the feasibility by contrasting the regular assaying with the irregular assaying. in addition, using the theory of statistics, i can decide the suitable number of stylebook to ensure the feasibility of the experiment

    本課題主要是為了解決綜采工作面煤、矸分離問題，為煤、矸破碎分選提供可行性方法，為破碎分選機提供數據資料。通過對煤、矸各種特性的研究，找出一種能解決不規則煤、矸選擇性破碎分選的技術途徑。對不規則自然礦塊強度特性研究，找出一種計算不規則自然礦塊強度公式，通過規則試件與不規則試件的比較確定出其可靠性。
  9. By using the method of error analysis of mbs, the identification equation of geometric error parameters is derived and according to the condition that the rank of coefficient matrix of error measurement equation group must be full, we can get 18 terms geometric error of 3 - axis nc machine tools and three displacement error and three position error

    應用誤差辨識軟體，解得各測量點的十八個誤差參數，即每個運動方向的三個位移誤差和三個位置誤差，再根據實際情況獲得三項垂直度誤差，得到了所有的21項誤差。
  10. The apsp produced abroad is made by numerical controlled machine tool, which has noise level of 71db ( a ), the apsp produced in our country is made in the method of exploratory which has noise level of 73db ( a ) and 75db ( a ). in order to analyze the influence of stator curve to noise, the author used tri - coordinate measuring instrument to measured exactly the inside surface of stator and got the straddling point coordinate, and made curve fitting by using matlab as language and studied the fitting effect and then worked out the equation of stator transition curve in return seeking, then comparied this method with the standard style and made the conclusion : the equation of atator transiting curve of apsp made by numerical controlled machine tool is close to theorical 5 power curve standard style, but compared with it, the stator transiting curve of apsp produced in exploratory has a major error. combining the testing results of noise, one can know that the qualily of stator transition curve play an importance to t he noise of the pump

    國外生產的汽車動力轉向泵是用數控機床加工的，其噪聲值為71db （ a ） ，國內生產的汽車動力轉向泵是用靠模方法加工的，其噪聲值分別為73db （ a ）和75db （ a ） ，為了分析定子曲線對泵的噪聲的影響，本人用三坐標測量儀對定子內表面進行精密測量，獲得定子內表面的離散點坐標，以matlab語言為工具對離散點進行曲線擬合，觀察擬合效果，然後，用回歸方法求出了定子過渡曲線的方程，並把該方程與理論方程標準型進行了比較，得出如下結論：用數控機床生產的汽車動力轉向泵的定子過渡曲線方程非常接近理論5次曲線標準型，而用靠模方法加工的汽車動力轉向泵的定子過渡曲線與理論5次曲線標準型相比較，則存在著較大的誤差，結合噪聲測試結果可知，定子過渡曲線的優劣，對泵的噪聲大小有著重要的影響。
  11. The hydraulic hitch is the common means that the operator be joined with the prime motor in farm machine. the paper made the hitch ? vector equation and found the solutions by newton iteration method through the strong numerical calculation function of computer. so the analytical solution insteaded the graphic method, the design accuracy and efficiency were acceptable

    本研究推導了懸掛機構的矢量方程，並藉助于計算機強大的數值計算功能，用牛頓迭代法解決了解矢量方程的問題，從而用解析法取代了圖解法設計此類機構，提高了設計精度和效率。
  12. By studying the vibration signal characteristics in periodic loading machine system, vibration signal model including state equation and observed equation was constructed

    通過研究周期性負載機械繫統振動信號的特點，構造了包括狀態方程和觀測方程的振動信號模型。
  13. The two key factors, machining methods and machine - setting parameters of sbg, which are related with the generation of theoretical tooth surface and topographic deviation for sbg, are analyzed in details. after building the machine - tool mathematical model and computing the tooth surface parameters, using the given conditions and mesh equation, the coordinates of the theoretical tooth surface of sbg can be computed, and, then, the theoretical tooth surface model of sbg is derived

    本文詳細地分析了形成螺旋錐齒輪理論齒面及產生拓撲誤差的兩個關鍵因素，即螺旋錐齒輪的切齒加工方法和機床調整參數;通過建立機床數學模型，計算齒面參數，用已知條件和嚙合方程進行聯合求解，得出了理論齒面的坐標值，從而獲得了螺旋錐齒輪的理論齒面模型。
  14. Then according to the mrf machine ’ s structure and motion mode, the function and assignment of mrf machine cnc system are analyzed. the design and implementation of cnc system are researched, and a set of pc - based open architecture cnc system is developed. a trace interpolated algorithm of mrf machine cnc system is advanced according to the characteristic of mrf. the symmetry axis curve surface, such as aspheric surface, which is fit for optics general equation can be machined with mrf machine by using this interpolated algorithm

    然後根據磁流變拋光機床的結構和運動方式，從工程實際應用出發，分析了磁流變拋光機床數控系統的功能和任務，研製了一套基於pc的具有開放式體系結構的數控系統，同時針對磁流變拋光的特點，提出了磁流變拋光數控系統的軌跡控制插補演算法，運用該演算法可對非球面等適用於光學通用方程表示的回轉對稱曲面進行磁流變拋光加工。
  15. The torsional vibrations dynamic model of corrugating machine system was established utilizing the transition matrix method to solves the dynamic equation and gets natural frequencies and circular frequencies of the torsional vibration

    摘要利用傳遞矩陣建模方法，建立了瓦楞機系統扭轉振動的動力學模型，進行了動力學方程求解，得到了系統扭轉振動的固有頻率和圓頻率。
  16. Vibration equation of two - plane balancing rotor is derived. non - linear error of bearing support of hard bearing balancing machine is analysed and relation curve is presented

    推導了雙面平衡轉子的振動方程，分析了硬支承動平衡機的支架非線性誤差對振動幅值與相位的影響，並繪制了關系曲線。
  17. Their safe margin functions are established from the angle of the automated machine ' s moving differential equation and the transform of energy, after the relation among the members of the machine has been attained

    在分析了啟動階段各構件的運動關系以後，利用自動機的運動微分方程及能量轉換關系建立了上述階段兩種可靠性計算的安全余量方程。
  18. The thesis is one sub - item of machine vision system, is aimed to study the application of image processing and recognition technique in vision system, and to fit curvilinear equation. then, computer communicate with dsp controller through com communications and dsp control two stepping motors to realize cross motion and longitudinal motion. for this, the paper mainly includes two aspects as follows : the first aspect is the design of image processing and recognition

    本文是機器視覺的研究項目中的子項目，主要研究圖像處理與識別技術在機器視覺系統上的應用，以及對識別出曲線擬合成方程，作為上位機採用串口通信輸出到下位機，下位機由dsp控制兩臺步進電機進行橫向和縱向運動，本論文主要研究上位機部分，包括以下兩個方面的內容。
  19. A theoretical analysis of the dynamical characteristics, such as equation of dynamics, transfer function and the inertia of the system, of the injection system of full - motor injection molding machine is made, and analysis on living examples was also made

    摘要對全電動注塑機射膠系統動力學和控制特性進行了理論分析，並分析了各環節的動力學方程、傳遞函數及系統的慣量，同時還進行了實例分析。
  20. The sib of differential - algebra equation ( dae ) can be interpreted as one mechanism of transient voltage unstable or voltage collapse, and this mechanism is illustrated under multi - machine system. moreover, the algorithm for search sib point under multi - machine system is proposed. the study of dae model and its singularity - perturbed model shows that they are different in essence

    微分-代數方程下的奇異誘導分岔可作為暫態電壓崩潰的一種機理解釋，在典型系統中詳細地分析了該機理，並在多機系統中構造出相應的算例，此外還提出了在多機系統中計算奇異誘導分岔點的演算法設想。
分享友人
分享到 Line

分享到臉書