plane joint 中文意思是什麼

plane joint 解釋
平面關節：一種滑膜關節，其關節接觸面是平的，或僅略有彎曲
  • plane : n 懸鈴木屬樹木。n 1 平面，水平面，面。2 （知識等的）發達程度，水平，階段。3 【航空】機翼面；〈常 ...
  • joint : n 1 接合，榫接合處，接合點。2 【解剖學】關節。3 【植物；植物學】節。4 【電學】接頭。5 【建築】接...
  1. The diffusion welding behavior of single - crystalline cu to single - crystalline - aio with a nb film interlayer and the joint microstructure properties were studied by tem, sem / eds analyses and four - point bend testing. the nb film interlayer deposited by electron beam evaporation on the ceramic side prior to diffusion welding was found to be olycrytalline and fiber - textured after diffusion bonding, with the close - packed plane ( 110 ) being parallel to the ( 0001 ) basal plane of - aio

    擴散連接技術是一門邊緣科學，涉及材料、擴散、相變、界面反應、接頭應力應變等各種行為，工藝參數多，雖然已經進行了大量的試驗研究，但卻對各種材料的連接機理尚未有明確的認識，為此人們試圖藉助于計算技術，對接頭行為進行數值模擬，以便找到共同規律，對擴散連接過程及質量進行預測與實時控制。
  2. And rock triaxial serve testing system is used, through model test involving bedded planes and a set of joint normal to the bedded planes in rock mass, multiple sliding failure affected by properties of joints and confining pressure is analysed, the condition triggering multiple sliding failure and characteristics of failure plane are given, under the co - action of inclination of connective joints ( bedded planes ), interlocking conditions of critical joints and confining pressure

    並在室內利用巖石三軸剛性伺服機，通過模型試驗對巖體的層面和一組與層面正交的節理的情況進行模擬研究，分析了結構面性狀和圍壓對復合式滑移破壞的影響，給出了在貫通性結構面（層面）傾角、非貫通性結構面以及圍壓等因素共同作用下，節理化巖體發生復合式滑移破壞的條件以及破壞面特徵。
  3. Fracture analysis of joint pole for front edge wing on boeing 735 - 500 plane

    500飛機前緣襟翼操縱連桿斷裂分析
  4. A study on the shear rheology of rock joint plane

    巖石節理面剪切流變的試驗研究
  5. Is 76 thousand sq. meter, which located in the yangjia economic development area in the south jinzhou district in the joint venture of development area and jinzhou district with the 16000 htousand dollars total investment amount and 600000 stere meter output per year. now it forms the japan advanced check up way and machine with japan 35 layers hot - press mainframe, and the product line of " plane, dry, cut " veneer product line. we won the high prize and credits for our advanced technology and high quality

    它採用日本的先進設備及世界上先進的生產工藝，現已形成以日本產九尺旋切機為主機的"刨干剪"單板加工生產線，以日本產三十五層熱壓機為主機，引進日本先進的化驗檢測儀器及檢測方法，從而使產品質量深為廣大用戶信賴，產品等級符合日本jpic美國ihpa英國bsi等先進國家標準及中國gb9846和gb13009標準
  6. This paper is focused on a series of experiments including two kinds of large - scale composite walls with different joint fashion under low cyclic loadings. the experiments are carried out in order to know the seismic of composite walls out - of - plane and research the impact of deformation out - of - plane on carrying ability in - plane, experimental design reference is expected to achieve and tech support provide

    為了彌補這方面的研究不足，本文對兩種連接方式足尺復合墻片進行了低周反復荷載作用下的恢復力試驗，以了解配筋砌塊復合墻的平面外抗震性能，同時研究平面外變形對墻體平面內抗震性能的影響，為配筋砌塊復合墻的設計提供依據。
  7. The programme can solve two - dimensional stresses, strains and axial symmetry problems with different yield criteria. a satisfying solution has been put forward to the contact boundary between reinforcements and soil. the special problem of two contact plane elements at the joint between plate and strip has been solved

    該程序能同時考慮平面應力、平面應變和軸對稱問題，並能運用不同的屈服準則，使其更具有通用性和適用性，成功地解決了筋材與土介質界面的接觸問題，較好地解決了墻面板與筋帶連接處出現兩個接觸面單元的特殊問題。
  8. Direct connect vias conduct so much heat away from the pin and into the plane that high temperature or long soldering time may be required to complete the joint - thermal damage could occur to both the board and the component from soldering or desoldering

    在焊接時，直接連接的過孔會通過引腳把大量的熱傳導至內電層，因此完成焊接就需要很高的溫度或者延長焊接時間，這就會導致在焊接或拆焊時發生電路板或元件的損壞。
  9. All of these reveal the further properties of the wave propagating in one - dimensional elastic continuum. on phase plane, the qualitative analysis are made, which exhibits four kinds of orbits : the heteroclinic orbit of burgers equation, the homoclinic orbit of k - dv equation, and saddle - foci heteroclinic orbit or saddle - joint heteroclinic orbit of kdv - burgers equation

    說明burgers方程在相平面上有相應于激波解的異宿軌道; k ~ dv方程有相應于孤波解的同宿軌道: kdv一buegers方程有相應于振蕩孤波解的鞍一焦異宿軌道和相應于激波解的鞍一結異宿軌道。
  10. Many new methods, such as reduction of gravity data to a horizontal plane, wavelet analysis, higher order statistics, joint inversion and interactive inversion of gravity, magnetic, electric and seismic data, 3 - d visualized inversion, as well as bp artificial network method have been widely used in the integrated data processing

    山區重力資料曲化平，小波分析及高階統計量等現代信號處理方法，重震、重磁、電震的聯合反演與交互反演，三維可視化反演， bp人工神經網路方法等在綜合地球物理處理解釋中得到廣泛應用。
  11. In order to study the influence of some changes in patellar position and configuration on knee extensor mechanism in sagittal plane after total knee arthroplasty, a two - dimensional model of knee joint in sagittal plane based on crossed - four - bar linkage tibiofemoral joint model is developed, which includes patellofemoral joint model in addition

    摘要為研究全膝關節置換術后髕骨部分形位參數的變化對伸膝機構性能的影響，建立了以交叉四連桿股脛關節模型為基礎的、包含髕股關節模型的矢狀面膝關節模型。
  12. This paper, in allusion to damage of expansion joint of bridge, introduces a sort of new structure of jointless device - semi - integral abutment jointless bridge, and establishes model of general structure finite element of this bridge, and in details analyses its qualities of stress. the model considers the interaction of superstructure - substructure - soil. resistance of the soil behind abutment adopts still soil pressure and elastic resistance when the temperature rising, but active soil pressure when dropping. analysis of qualities stress of bridge includes of action of dead load, car load, temperature load of season character. taking an 100m length pc semi - integral abutment jointless bridge as instance, the paper establishes the model of plane frame by applying large common software - anasys, and analyses it by elastane and large deformation to imitate character of stress and deformation of general bridge. at the same time corresponding models of finite element of joint bridge and integral abutment bridge are established, and unique stress and performance of structure of semi - integral abutment jointless bridge are researched by comparing and analysing character of three different models under same loading, and controlling factor of design and constitution are generalized. in conclusion, for semi - integral abutment jointless bridge, on one hand shear, moment and deflection of the main beam and axis force of substructure are approximate with that of joint bridge, and integral stifmess of structure is increased and damage of expansion joint is eliminated, on the other hand there is axis force in main beam, shear and moment of substructure are bigger than that of joint bridge. in all this type of jointless bridge has rational stress and is worth of application and popularization

    半整體式橋臺無縫橋梁計算模型考慮了上部結構-下部結構-土的共同作用；臺後土抗力升溫時採用靜止土壓力加彈性土抗力，降溫時採用主動土壓力；分析橋梁受力性能時考慮了結構自重、車輛荷載和季節性溫變荷載的作用。以一座橋長100mpc半整體式橋臺無縫橋梁為實例，採用大型通用軟體ansys建立平面框架模型，進行彈性、大變形分析，模擬全橋受力和變形特點；同時建立與此對應的有伸縮縫橋梁和整體式橋臺無縫橋梁有限元模型，通過三種橋型同步加載對比分析，研究半整體式橋臺無縫橋梁獨特的受力特點和結構性能，總結其設計控制因素和構造要求。通過本文研究知：半整體式橋臺無縫橋梁主梁的剪力、彎矩、撓度和下部結構的軸力與梁式橋相近，結構整體剛度增大，併除去了伸縮縫病害；但主梁增加了軸力，下部結構剪力、彎矩較梁式橋大；綜合分析是一種受力合理有實踐和推廣價值的橋型。
  13. Then the behavior of the free joint when we bring the periodic perturbation through controlling the actuated joint is analysed, we can find in the result that the behavior of the free joint in the phase plane follows an ordered closed trajectory with the center equilibrium point + 2 in the case where the amplitude of the input is small, we can define a weakening factor to make the position of the free joint reach the center equilibrium point + 2

    通過相平面分析的方法分析了當驅動臂施加周期擾動對非驅動臂運動的影響，其結論為通過調整驅動臂周期擾動的幅度及極性，可以使非驅動臂沿著圍繞平衡點2的極限環軌跡運動。在此基礎上，提出衰減因子的概念，通過衰減因子調整驅動臂擾動的幅度和周期，使非驅動臂能夠穩定在平衡點2 。
  14. The simulation results show that the real system and the average system have the same trajectory in the phase plane under the disturbance of periodic input of the actuated joint of the robot

    然後利用平均值法對真實系統進行平均化簡化，推導出真實系統的平均化模型。
  15. We have simplified the model through obtaining the average system of the underactuated robot using averaging method which is efficient to deal with nonlinear system. the simulation results show that the real system and the average system have the same trajectory in the phase plane under the disturbance of periodic input of the actuated joint of the robot

    將驅動臂的運動作為非驅動臂的擾動，建立了非驅動臂的動態模型，利用動態方程有效的近似解法?平均法，對非驅動臂的動態模型進行簡化，得到近似的平均系統，通過模擬計算驗證了二者具有相同的動力學特性。
  16. The opening stress and the life of crack growth is calculated and compared with the test results and the experience formula. the feasibility of the newman theory of opening stress used in the high strength steel is validated. then through the slice synthesis method, the three dimension surface crack of the weld joint of cone - cylinder is decomposed into many plane through cracks

    本文將基於裂紋閉合現象建立的帶狀屈服模型，用在平面貫穿裂紋中，計算此時的裂紋張開應力和疲勞裂紋擴展壽命，與試驗結果和經驗公式比較，驗證newman裂紋張開應力理論在高強鋼中的可行性；然後，用切片合成法，把潛艇結構凸錐柱結合殼焊縫處的三維表面裂紋分解成平面貫穿裂紋，用帶狀屈服模型的理論來分析平面貫穿裂紋，得到裂紋沿深度方向的擴展速率，進而得到潛艇結構的疲勞壽命。
  17. Ruian nanfang valve factory, set up in 1995, emerged with sanhuan group of hubei air valve plane is a joint stock cooperation enterprise. it adopts the kernel technology and many years production experiences from hubei air plant. its workmanship and quality are in the leading position in the same field at home

    瑞安市南方氣門廠屬股份合作制民營企業，始建於一九九五年，后與三環集團湖北氣門廠聯合，吸取了湖北氣門廠的技術精髓和多年生產氣門的生產技術工藝流程經驗，生產工藝產品質量名列國內同類產品前茅。
  18. On april 2002, we produce 2540 pieces lateral plane models " erj - 145 " for chengdu aircraft industry group. this plane was joint venture by harbin aircraft industry group and embraer s. a, production of anbowei plane industrial company, it will fly first in harbin on december 2003

    2002年4月為成飛公司生產erj - 145支線飛機模型2540架，該機型是中航第二集團哈飛公司與巴西航空工業合資，安博威飛機工業公司生產預計2003年12月在哈爾濱平房機場首飛
  19. Analysis of the angle of anterior cruciate ligament of knee joint to the coronary plane and the establishment of oblique coronary scanning

    膝關節前交叉韌帶與冠狀面成角分析和斜冠狀位掃描的建立
  20. Compared with the experiment data, the temperature field and the thermal stress field are discussed. the spacing, the time of sealing and the plane form of the later joint - filled slots are discussed especially, and it is found that the spacing, the time of sealing and the plane form of the later joint - filled slots are comprehensive indexes which are relevant to material, design and construction. the theory value of the spacing and the time sealing of the later joint - filled slots and some proposals on the plane form are presented on the basis of numerical calculation

    本文在綜合前輩的研究成果的基礎上，推導了粘彈性場的三維有限元解，對比實際工程實驗數據，對大體積混凝土結構內部的溫度場和應力場進行了分項研究，重點討論了后澆帶的留置間距、封閉時間和平面形狀，發現其留置間距、封閉時間和平面形狀都是綜合指標，是和材料、設計、施工有關的。
分享友人
分享到 Line

分享到臉書