solid-solid boundary 中文意思是什麼
solid-solid boundary
解釋
固-固相邊界-
In light of the elastic thin plate theory, the author induced equilibrium differential equation of bi - direction cellular slab, which was proved correct through analysis and comparison to result of ansys to with theoretical calculation. through the deflection and bending moment coefficient calculation of bi - direction cellular slab under various boundary conditions, the author brought forward the theory that the deflection of mid - span and bending moment coefficient calculation of mid - span and support of bi - direction cellular slab could be in accordance with solid plates ", which could satisfy the precision of engineering
本文根據彈性薄板理論，導出了雙向空腹板的平衡微分方程，並通過理論計算和通用有限元程序ansys結果對比，驗證了其正確性；通過對各類邊界條件下雙向空腹板撓度和彎矩系數的計算比較，本文提出：雙向空腹板跨中撓度及跨中、支座彎矩可使用本文空腹板剛度公式查找現有的實心板撓度彎矩系數表進行計算，完全能滿足工程精度要求。 -
Compared with the behavior of macromolecules in real solution system, the adsorption information in the monte carlo simulation system, such as adsorption isotherm, surface coverage, and bound fraction, was studied for discussing its relation to simulation parameters. five - selection simple cubic lattice, self - avoiding walk, and nearest interaction model were used to construct the homopolymer adsorption model on the solid - liquid interface. periodic boundary conditions were used to reduce the fixed error from limited cubic lattice in size
模擬中採用五選擇簡單立方格子上的自迴避行走和最近鄰相互作用模型；使用周期性邊界條件以減小有限大格子空間帶來的系統誤差；用鏈節間相互作用能、界面吸附能、體相濃度和鏈長約束體系中的高分子的吸附行為；用末端轉動、 l -翻轉、曲柄運動、蛇形運動和r - r切除-生長法對模擬體系進行擾動；用系統達到吸附平衡后的樣本來研究模擬體系中的高分子鏈在固液界面上的吸附。 -
All main ways of metal strengthening including grain refining strengthening, dislocation strengthening, grain boundary and substructure strengthening, second phase strengthening, solid solution strengthening, as well as trip strengthening and so on, have totally found expression in the adi
金屬強化的幾種主要方式：細晶強化，位錯強化，晶界與亞結構強化，第二相強化，固溶強化，細晶強化以及trip強化等都在等溫淬火球鐵中得到了體現。 -
This boundary is like the outer circumference of the escher print or the surface of the solid cylinder i considered earlier
這個邊界就類似艾雪版畫的外緣或者前面提過的圓柱體的表面。 -
China and russia have solved a historical legacy on the boundary issue, laying a solid foundation for greater development of bilateral ties in the future
中俄解決歷史遺留的邊境問題，所有這些都為中俄關系的發展奠定了基礎。 -
Hust - caid ( computer aided industry design system developed by harbin university of science and technology ) is a parametric modeling design system based on feature. this system describes entities based on mixed model of boundary representation 、 csg tree and feature description tree ( fdt ), in which the design of solid model and feature - editing can be completed with rebuilding csg tree and feature description tree. but, in the feature modeling, with the number of features increasing, the design model becomes more and more complex. the efficiency of designing is decreased
Hust - caid （哈爾濱理工大學計算機輔助工業造型設計系統）是一種基於特徵的參數化造型設計系統。該系統在基於b - rep 、 csg樹和特徵描述樹（ fdt ）的混合模型基礎之上，利用重用csg樹與特徵描述樹的技術，來完成實體模型的設計與編輯工作。但在特徵造型過程中，隨著造型體數目的增加，設計模型將變得越來越復雜，由此導致了系統設計效率的降低。 -
On the basis of prantel boundary layer idea, wind sand fluid of irreducible rare phase as research object, by the foundation of general equation of wind sand fluid, in the condition of basic hypothesis, the boundary layer equation of car roof surface is set up and the boundary condition the fluid slippage character in solid wall surface is given
摘要基於普朗特的邊界層思想，以不可簡化成稀相的風沙流體為研究對象，以風沙流的一般方程為基礎，在基本假設的條件下，建立了高速轎車車身頂部過流表面的邊界層微分方程並給出沙流在近壁表面以滑移為特徵的邊界條件。 -
In order to overcome the difficulty mentioned above, this paper provides an improved heat transfer equation and a mended bem for the problems. first of all, the enthalpy and the " virtual temperature " are introduced into the paper to eliminate several mutative thermophysical properties in the heat transfer equation. secondly, the movement of the boundary between the solid and liquid phases in the billet is educed by virtue of the laplace transform
這些改進包括：引入熱焓和「虛擬溫度」的概念，對非常數的熱物性參數進行整合：充分考慮鑄坯凝固潛熱釋放帶來的影響，利用「溫度回升法」來加以處理；利用拉氏變換和反拉氏變換的原理來對凝固過程中鑄坯內部固液相界面的移動方程進行了推導和求解，在凝固過程中充分考慮鑄坯內部的固液兩相的影響等等。 -
In this thesis, the construction and monitoring general method of cable replacement work for qianwei minjiang river cable - stayed bridge is introduced firstly, then, using large - scale commercial finite elements analysis software, algor, a space solid model is developed. in order to give attention to internal force and deformation, the thesis simulates the factual situation of the bridge by adding boundary elements. the analyzed items include : cable forces, deflections, stress of box - girder and maximum horizontal deformation of tower under different cable - replacement cases, which can be used to tutor design and construction for other similar works
本文以犍為岷江大橋換索工程為背景，首先介紹了該橋換索施工與監控工作的大致情況，並應用大型商業有限元軟體algor建立了該橋空間計算模型，建模過程中為了真實地模擬結構換索前的內力狀態，實現內力與線形兼顧，本文使用了「添加邊界元還原結構內力」的方法。 -
Treating the soil as a two - phase mixture and considering the interactive influence of seepage and solid deformation, this paper analyzes the dynamic impedance of group piles in layered saturated porous media by indirect boundary element method and investigates the effects of pore fluid in saturated soils on dynamic impedance of piles
摘要將飽水軟土地基視為兩相介質，考慮水的滲流和土骨架變形的耦合作用，用間接邊界元法分析層狀飽水軟土地基中橫向受荷群樁動力阻抗，探討飽和土中孔隙流體對飽和土中橫向受荷群樁動力阻抗的影響。 -
In chapter two, according to n - s equation, considering the couple between liquid and solid, the double - fluid model is used to respectively set up momentum equations of two - phase fluids in condition of basic hypothesis, which are general equations of two - phase fluids. simplifying the equations in boundary layer, the momentum differential equations are required and the boundary conditions are given. in the same time, the simplifying equations and their solutions, in which solid grain satisfies in boundary layer
第二章依據n - s方程，考慮到液、固之間的相間耦合，在基本假設條件下，採用雙流體模型，分別建立液、固兩相的動量方程，它是固液兩相流體的一般方程式；對其在邊界層流區內進行量級比較，得到邊界層動量微分方程並給出其邊界條件，同時也得到固體顆粒在邊界層內所滿足的簡化方程及其解的表達式。 -
The main conclusions are summarized as follows : classical nucleation and growth mechanism only occurs near the phase boundary of the disordered phase, by which 8 " phase precipitates from supersaturated solid solution directly
主要研究發現：只有處在無序相界附近的合金沉澱機制基本為經典形核長大，相直接從過飽和固溶體中沉澱，序列為：過飽和固溶體化學計量比相長大。 -
A new fluid - structure coupling numerical method is developed in the present dissertation. 2d / 3d navier - stokes equations and low renolds number turbulence model are solved in the fluid zone, while the structure models are solved in the solid zone. the boundary conditions are transferred between the two zones after each time step
該方法採用了準確的數學物理模型，在流體區域求解二維、三維favre平均的非定常navier - stokes方程，在固體區域對于不同的問題求解體振動模型，每一個計算時間步完成後，流體和固體之間傳遞一次邊界條件。 -
Mgo and al2o3 can form mgal2o4 existing mainly on the grain boundary through solid phase reaction, which limited the migration of the grain boundary and thereby inhibited the abnormal growth of the alumina grain
Mgo能與al _ 2o _ 3發生固相反應生成主要存在於材料晶界處的mgal _ 2o _ 4 ，限制了晶界的遷移，從而抑制了氧化鋁晶粒的異常長大。 -
It is observed that considerable liquation microcracks and some other microffissures called solid - state microcrack initiate in the regions nearby the fusion line and propagate across the grain boundary
研究發現，熔合線附近的熱影響區產生大量液化裂紋和沿晶擴展的固相裂紋。 -
Abstract : in the course of deeply processing of nonmetal mineral, because of the compact structure of mineral, most liquid - solid phase reactions conform to shrinking core model, including unstable diffusion with boundary - moving
文摘:在非金屬礦的深加工過程中，由於礦石結構緻密，大多數液固相反應符合縮芯模型，其中包含有邊界移動的不穩定擴散。 -
When it was soaked in the semi - solid temperature, the preformed texture was accompanied with the part high - energy - area melting. its presentations were the honey combs at the grain boundary and the pools in the grain. it was the essence condition that the semi - solid metal maintained the solid character and had the thixotropy
5 、形變組織半固態保溫過程中伴隨著局部高能區的熔化，表現為晶界蜂巢狀結構和晶內液池現象，這是半固態合金保持固相特徵並具有觸變性的基本條件。 -
The microstructure observation in the microfissures suggests the liquation microcrack results from grain boundary liquation by constitutional liquation of mc carbides and formation of continuous and or semi - continuous low melting liquid films, however, the occurrence of the solid state microcracks can be attributed to the effect of ultrafast transit thermal shock introduced by high energy electron beam
液化裂紋起源於mc碳化物的組份液化而形成的晶界連續或半連續的低熔點共晶液化膜，固相裂紋形成的則是高能電子束流的快速瞬態熱沖擊效應的直接結果。 -
Wave propagation in a liquid - saturated porous solid with micropolar elastic skeleton at boundary surface
所對應的重力波拖曳比反向切變 -
The noise attenuation factor of the solid boundary wall for 282ep
在282ep號工程計劃下築建的實心圍墻在減低噪音方面的成效。
分享友人