surface eddy 中文意思是什麼

surface eddy 解釋
表面渦流
  • surface : n 1 表面；地面；水面；廣場，空地。2 外觀，外表，皮毛。3 【幾】面；切口；【航空】翼面。adj 表面的...
  • eddy : n. 埃迪〈姓氏〉。n. （水，風塵等的）漩渦，渦流。vt. ,vi. （-died; -dying） （使）起漩渦；（使）旋轉。
  1. Induction heated oil tempered spring wire is a kind of new technical material which has been developed since 1980s. it can be heated by means of eddy induced into itself through electromagnetic coil and this method is mainly used in surface quenching. with correct designing and reasonable current frequency, induction coil and heat treatment process selected, as well as plc controlling applied, the wire can be uniform heated along cross - sectional and longitudinal direction and can be quenched and tempered continuously

    應加熱油淬火-回火彈簧鋼絲，是二十世紀八十年代發展起來的新技術材料，在國外稱為itw induction heat oil tempered spring wire 。是通過線圈電磁感應鋼絲本身產生的渦流進行加熱，通常主要用於表面淬火。經正確設計，選擇電流頻率，合理的感應線圈及熱處理工藝，並實施plc控制，可使鋼絲整個截面及長度上得到均勻加熱，進行連續整體淬火和回火。
  2. Aimed to realize the problem of quenched rail qualification forcast through quantitative analysis of quenched rail surface hardness by eddy current, and combined the eddy current theory with the computer image processing and signal analysis, the hardness testing model is established in this paper

    針對渦流無損檢測淬火鋼軌踏面硬度的定量分析來實現淬火鋼軌質量保證預報問題，將電渦流理論與現代計算機圖象處理和信號分析相結合，完成硬度測試模型建立。
  3. Abstract : aimed to realize the problem of quenched rail qualification forcast through quantitative analysis of quenched rail surface hardness by eddy current, and combined the eddy current theory with the computer image processing and signal analysis, the hardness testing model is established in this paper

    文摘:針對渦流無損檢測淬火鋼軌踏面硬度的定量分析來實現淬火鋼軌質量保證預報問題，將電渦流理論與現代計算機圖象處理和信號分析相結合，完成硬度測試模型建立。
  4. Eddy current testing is a method suitable for testing changes occurred in the surface or subsurface of specimen. when using this method to test carburized components, the variable of eddy current signal is depend on the change of constituents " physical property in carburized layer. so it can be used to test carburized components nondestructively

    渦流檢測是一種適用於試件表面和近表面變化的檢測方法，利用渦流方法檢測滲碳件時，渦流檢測信號的變化主要取決于滲碳層組織的物理特性的變化，所以渦流檢測方法可以對金屬表面滲碳層深度進行檢測而不構成任何破壞。
  5. Numerical analysis of eddy nondestructive test for surface hardness of rail

    渦流無損檢測淬火鋼軌踏面硬度的數值分析
  6. Abstract : a serial connection and complementary eddy current sensor hasbeen designed. the sensor can continually, quickly and accurately measure the thickness of metal fail, whether its surface is plainness or no

    文摘:設計了一種串聯順接互補型電渦流傳感器，能連續、快速、準確地檢測出金屬箔材的厚度，無論其表面是否平整。
  7. The strict solution of the eddy current distribution inside a conductor cylindrical boundary surface for quasi - state - state is obtained by derivation of maxwell ’ s equations ; meanwhile, the approximate solution of the eddy current and electromagnetic field in the condition of the low - frequency or the high - frequency are obtained. furthermore the penetration depth of the skin effect is achieved

    五、討論了似穩條件下導體圓柱面內的渦電流分佈的規律。我們採用圓柱界面條件下獲得的趨膚效應的穿透深度與採用平面條件下獲得的趨膚效應的穿透深度相一致，我們的研究可視為對傳統教材相關論述的有益補充。
  8. Surface layer ; large - eddy simulation ; turbulence

    近地面層大渦模擬湍流
  9. Large - eddy simulation for unstable surface layers large - eddy simulation for unstable surface layers

    不穩定近地面層湍流的大渦模擬
  10. Refined grids were utilized in a large - eddy simulation model for obtaining high - resolution planetary boundary data and analyzing surface layer turbulence. simulation results showed that refined meshes reduced turbulent contributions of subgrid scales, sensitivity of simulation results to sgs parameters decreased, and features of the whole boundary layer were explicitly resolved better. results also revealed flux - profile relationship correctly in surface layer and a good agreement of turbulent velocity characters with observation. therefore, it concluded that the les method was able for simulation of surface layer flow and turbulence, and might be used for further applications

    採用加密網格的大渦模式獲取邊界層風溫場的高解析度模擬結果，並據以分析近地面層大氣的湍流特性。結果表明，較小的網格尺度使次網格湍流貢獻率大為降低，模式計算結果對次網格參數的依賴性減小，邊界層整體特徵得到更好的反映。同時，模擬出的近地面層通量廓線關系及湍流速度特徵與實際觀測結果吻合甚好，表明模式具有反映近地面層平均運動和湍流特性的能力。
  11. It can still decrease influence of the eddy current greatly while contace surface of coil type double - pole amf structure is not need to be slotted, so it can also decrease surplus axial magnetic field when the current is at zero and axial magnetic field hysteresis time

    線圈式兩極縱向磁場觸頭結構的觸頭表面不需開槽仍能大大降低了渦流的影響，因此也減小了電流零點時的殘余縱向磁場和縱向磁場滯后時間。
  12. Eddy structure in south china sea from satellite tracked surface drifting buoys and satellite remote sensing sea surface height

    衛星跟蹤浮標和衛星遙感海面高度中的南海渦旋結構
  13. In this subject, a new method and technique that applied the error separation theory to test of the surface flaw of axis - like parts using eddy current is proposed for the first time. based on this method, a mathematical model of extracting the surface flaw of axis - like parts is established. then " an automation system for the eddy current examination of the surface flaw of axletree " is designed

    本課題首次應用誤差分離理論提出了對軸（孔）類工件表面缺陷進行渦流無損檢測的新方法和新技術，建立了基於該方法的提取軸（孔）類工件表面缺陷的數學模型，並設計了「軸承滾子表面缺陷渦流自動化檢測系統」 。
  14. Liquid penetrant testing, eddy current testing and magnetic particle testing are mainly used in the detection of surface flaws and near - surface flaws, radiographic testing and ultrasonic testing are mainly used in the detection of inner defects, ultrasonic testing is also used in the detection of spheroidization quality of smooth surface castings, while vibration testing is used in the detection of spheroidization quality of rough surface castings

    液體滲透檢測、渦流檢測和磁粉檢測常用於檢測鑄件表面和近表面缺陷，射線檢測和超聲檢測常用於檢測鑄件內部缺陷，超聲檢測可用於表面光潔鑄件的球化質量的檢測，振動檢測則用於表面粗糙鑄件的球化質量的檢測。
  15. Large - eddy simulations are carried out for the adjustment of convective boundary layer over heterogeneous surfaces. simulations are confined for zero mean - wind and flat terrain. surface heat - flux is set varying in

    研究限於無風平坦地形條件，地面熱通量在一個水平方向作非均勻變化平均地面熱通量為0 . 15kms
  16. The calculation to the eddy current on the contact surface and axial magnetic field of contact surface and center surface of contact gap are carried out while the current is at zero. after the iron core of ring type is put in, the eddy current on the contact surface will be increased, the axial magnetic field that the eddy current creates will be also increased

    對電流過零時觸頭表面的渦流和觸頭表面及觸頭間隙中心平面上的縱向磁場進行了計算，加入圓環型鐵芯后觸頭表面的渦流增大，渦流產生的縱向磁場增大，在鐵芯中開槽后渦流的平均水平降低，縱向磁場平均值降低。
  17. Skin effect is the tendency for alternating current to flow near the sruface of the conductor in lieu of flowing in a manner as to utilize the entire cross - sectional area of the conductor. this phenomenon causes the resistance of the conductor to increase. the magnetic field associated with the current in the conductor causes eddy currents near the center of the conductor which opposes the flow of the main current near the center of the conductor. the main current flow is forced further to the surface as the frequency of the alternating current increase

    表面疚是指交流電流較傾向于導體的表面傳導而非流經整個導體截面的趨勢，這些現象會造成導體的電阻提高，與導體中的電流有關的磁場在導體中心部位產生過電流而阻礙了中心部位的主要電流，當交流電的頻率增加時，主要電流的流向會進一步被推擠到導體表面。
分享友人
分享到 Line

分享到臉書