two-position control 中文意思是什麼
two-position control
解釋
二位置控制-
Depend on the comprehensive analysis and study of the structure, principle, and exterior characteristic of the motor, through the methods of system modeling and digital simulation analysis, two kind of control device that work for the low voltage ( lvdc ) and the high voltage ( hvdc ) in avigation are researched respectively. point to the control technique of close - loop speed stabilization at a limited adjustment speed range, we bring out the close - loop speed control method that using the rotor position sensor indirectly measure the speed of the motor
在全面分析了稀土永磁無刷直流電動機的結構特點、工作原理、運行方式以及外部特性的基礎上，通過系統建模和數字模擬分析，分別針對航空低壓直流（ lvdc ）和高壓直流（ hvdc ）兩種電動機構用永磁無刷電動機，在小范圍轉速連續調節下的閉環穩速控制技術進行了詳細理論研究，提出了利用轉子位置傳感器信號間接測量電機轉速進行電機轉速閉環穩速控制的策略。 -
The author suggests that the three lithosphere - scale faults, lancangjiang fault, jinshanjiang - ailaoshan fault and axis fault in the middle of the basin, are the main geological structures that control the formation of basin, magmatism and metallogenic congregate district. the anticline structure with an axis of triassic strata and the related fault system within the basin, and gonglang arch - shaped folding structure in the south of the basin are the geological structure controlling the formation of ore fields. junctions of two or more faults with different orientation, interlayer cataclastic structural zone and oxidation - reduction ( redox ) boundary were the favorable position for the formation of ore bodies
認為瀾滄江斷裂、金沙江-哀牢山斷裂及盆地中軸斷裂這三條巖石圈斷裂是主要的控盆-控巖（巖漿巖）構造及礦集區尺度的控礦構造；盆地中以三疊系為軸的背斜構造及相關的斷裂系統、盆地西南緣公郎弧形構造等是礦田尺度的控礦構造；多組斷裂的交叉、層間破碎帶及地層柱中的氧化還原界面是形成礦體的有利部位。 -
After discussing the market risks based on the individual investor behaviors, it describes the connotation, materialized model, and explores the risk ' s position in china security market. it finally draws the two risk - control solutions : 1 ) fosterage of rational individual investor ; 2 ) information disclosure
本文提出了投資者風險決策中的理性判斷標準，認為理性概念是多層次多含義的，其精華是指一種最佳的、恰到好處的合理的狀態，一種最優化（ optimization ）的而非謀求數量最大化的方案就是理性選擇。 -
It adopts computer digital controlled system plc orientation mo dule touch scerrn to control, realizing x z w axis direction s precise orientation by ac servo system. in actual operation, just put the glass on the transmission belt, input drilling position data on the screen, press the start button, the machine will automatically position itself and finish all drilling operations, and automatically stop when the works is completed. this machine s two group drilling heads can work at the same time, one group drilling head is also ok. this machine has high drilling efficiency and accurate position, is an ideal choiceness equiment of scree - wall glass and other large specand volume production glass drilling
該機採用計算機數控系統plc定位模塊觸摸顯示屏控制，由交流伺服系統實現x z w軸三個方向的精確定位。操作時只需將玻璃放在傳送帶上，在顯示屏上輸入鉆孔位置，按啟動按鈕，自動定位鉆削所有孔位，完成工作后自動停機。本機兩組鉆孔機頭可以同時工作，也可以單組機頭工作。 -
Auv ' s position control and velocity control are researched and s imulation experiment i s carried out at two situations : in blue and whisht water and in water with current and adding noise
本文設計了auv位置控制器和速度控制器。並對深海靜水和有海流噪聲兩種情況進行了模擬試驗。 -
Two nonlinear simulation methods are designed by curve fitting method and anfis which seem simply and right in the simulation experiment. based on the model different control strategies also were realized in detail such as chopped current control ( ccc ), angular position control ( apc ), amplitude - change ccc and pi control. a simple torque sharing function ( tsf ) method and a tsf controller were designed which decreases torque ripple effectively
文章中還建立一種基於模糊神經網路的非線性模型，並對比分析了三種方法，模擬中確定了電機的最優開通關斷角，在此基礎上實現了電流斬波控制、角度位置控制、變幅值電流斬波控制以及分段雙閉環pi控制，模擬結果表明，它實現了電機的正常運行，很好的抑止了電機轉矩脈動，同時有效地降低了噪聲。 -
One robust compensation adjustment is presented, based on which and h ? mixed sensitivity control method, then a new h - control method is brought forward and is applied in the pressure - adjusting loop of this system. h mixed sensitivity control method is applied in the position - adjusting loop. system simulation and experiments prove that using these two control methods, performance of close - loop system is very good and excellent robustness is obtained too
在此基礎上，針對h _控制混合靈敏度優化策略的特點，提出了一種新的h _控制方法，並將其應用到卷取機步進控制系統的壓力控制環節，同時首次將h _控制混合靈敏度優化策略應用於卷取機步進控制系統的位置控制環節，系統模擬和物理系統模擬實驗證實這兩種控制方法不僅保證了閉環系統特性，還具有良好的魯棒性。 -
Single er valve ' s control equation is derived two mathematic models of er valve - cylinder actuator is constructed according to control methods of er valve - cylinder. and a position control system based on er valve - bridge actuator is simulated. the result shows that the system has good dynamic performance
根據電流變閥對液壓缸的控制方式，建立了兩種由電流變閥控制液壓缸組成的電流變閥控系統動力元件的數學模型，並對電流變閥橋路結構式的動力元件組成的閥控位置系統進行了模擬。 -
Guiding type two - position & two - port high - temperature solenoid valve adopts teflon hard seal structure, with reliable performance, large flow, high - temperature resistance, and corrosion resistance. it can control multiple fluid, with easy operation
先導式二位二通高溫電磁閥，採用聚四氟乙稀硬密封結構，耐高溫、耐腐蝕、性能可靠，流量大、使用方便，能控制多種流體。 -
The same contactors are used for ordinary two-position control.
普通雙位控制中採用相同的接觸器。 -
Two screens is the use of a system controller two screens, wiring and save face position control box cost savings
雙光幕系統是使用一個控制器控制兩套光幕，節省接線和面板位置，節省控制盒成本。 -
The innovative ideas in this paper are that robust h control theory based on conventional ip controller is applied to the high - precision feed of a single axis, and the controlled plant is composed of ip velocity loop and two - order model of linear motor. a constraint condition on y in the problem of h2 / h is deduced from the frequency criterion of riccati equation, which makes the repeated computation on r simple. considering the two - loops control problem, the h state feedback controller based on ip controller as the inner controller is applied to satisfy the velocity performance of the system, and a pi controller, the external controller, is used to satisfy the position performance
本文的創新之處在於將傳統的ip速度控制器和直線電動機的二階模型作為一個廣義的被控對象，利用魯棒h _控制理論設計了一個h _狀態反饋控制器，以此解決高精度進給的控制問題，並在此基礎上研究了h _ 2 h _混合控制問題，結合h _代數riccati方程正定鎮定解存在的頻率判據，推出了一個控制器存在的約束條件，使以往須反復試探的，有了更進一步的約束范圍，簡化了計算。 -
The background of this dissertation is the gantry synchronous control problem of numerical control gantry - moving type milling machining center drived by two linear permanent magnet synchronous motors with the same parameters. theory of dynamic precision synchronization traverse and research of realization methods for linear servo dual position loops system is researched
以兩臺永磁直線同步電機驅動的數控龍門移動式鏜銑加工中心同步控制問題為背景，對直線伺服雙位置環動態精密同步進給理論和實現方法進行研究。 -
Based on state space method of modern control theory, the mathematical model for the two way / two position hydraulic operated directional valve in thread cartridge is established
摘要基於現代控制理論的狀態空間法，建立了螺紋插裝式液控換向閥開、閉過程的動態特性數學模型。 -
Abstract : the tag - position equation and location differential algorithms of etc system with two arrangements of roadside equipments are deduced. the influence of installation tolerance on the dsrc communication results is analysed and a method of installation quality control is presented as well
文摘:推導在公路不停車電子收費系統常見的兩種路旁設備安裝方式中車輛標識卡的定位方程和坐標變化量的演算法，分析安裝誤差對dsrc通信的影響，提出控制安裝工藝質量的辦法。 -
In this system, the velocity and position synchronization of the two motors is the very important thing. in this sense, the improved cross - couple control algorithm for synchronized motor control is used to emphasize synchronization between the two motors at expense of following the command absolutely. in case of synchronization for multiple motors, the real time data communication is necessary
在這個系統中，兩臺電機速度和轉角的精確同步是最關鍵的，根據這一特殊要求，本文研究了已被廣泛應用的非耦合控制演算法和傳統的耦合控制演算法，提出了改進的耦合控制演算法對兩臺電機進行控制，並對幾種控制演算法進行模擬分析。 -
The direct lateral force control includes two ways : trajectory control and position control. this research aims at lateral force control
直接側向力控制分為軌跡控制與姿態控制兩種方式，本文研究姿態直接力控制。 -
Two position three way directional control valve
二位三通換向閥 -
Furthermore, because the three grades decelerate control method, which is used widely, in stack crane control in china has some shortcoming, two rbf neuron network applied in position error study and dot position control is put forward. because neuron network is of self - study, emendation and modification can be achieved in control and can remedy the shortcoming caused by shortage of sample
另外，本文還針對目前國內在對堆垛機控制方面普遍採用的三段式減速控制規律的弊病，提出用兩個rbf神經網路分別作為位置誤差學習器和點位位置控制器，由於神經網路的自學習功能，可以使得在控制當中不斷校正和修改在訓練時由於樣本不足造成的缺憾。 -
Recently, a new kind, two - position and three - way solenoid valve with great rate of flow and high speed as well as its test bed has been developed by school of energy and power engineering, wuhan university of technology. results have shown that it can control the injection of the diesel engine preferably. the research work in this paper has been done concerning on the solenoid valve and its test bed, which is listed as following
武漢理工大學能源與動力工程學院為其所配系統開發研製的一種二位三通大流量高速電磁閥，具有響應快、流量大等特點，能較好的實現對噴油過程的柔性控制，同時，該院還開發了電磁閥專用的測試裝置，本文的研究工作即是針對電磁閥及其測試裝置的進一步優化而展開的，分別如下。
分享友人