voltage fed 中文意思是什麼

voltage fed 解釋
電壓饋電
  • voltage : n. 【電學】電壓,電壓量,伏特數。 the working voltage (電氣的)耐壓限度。
  • fed : feed 的過去式及過去分詞。 upness1 過飽吃飽。2 極度厭倦。n 〈美俚,常作 F 〉聯邦調查局人員;聯邦政...
  1. It is fed into the grid at this voltage.

    它是以這種電壓饋入電力網。
  2. And the excitation voltage and output were also fed through the selector switch to the digital voltmeter.

    其激勵電壓和輸出也通過選擇開關接到數字電壓表上。
  3. As for it also has low working voltage and small power dissipation, it has became the ideal succedaneum of crt. furthermore, fed doesn ’ t need negative photo, large visual angle, wide working temperature extent

    另外, fed不需背光、視角大、工作溫度范圍寬等優點也對目前平板顯示器的主流產品有源矩陣液晶顯示器提出了嚴峻的挑戰。
  4. The study has completed the design of two - phase inverter and made up of the two - phase inverter - motor system for experimental use it is a variable frequency adjustable speed system with a open - loop control of rotational speed, which consists of voltage - controlled oscillator circulating assign device inverter circuit and two - phase induction motor a accurate mathematical model is set based on the whole system, and simulator program of dynamic and steady condition is established, which is used to calculate the dynamic and steady performance by kron and symmetrical coordinate converter by simulator calculation and experimental research with specific parameter of the system, a comparison is made between predicted and experimental characteristics, experimental measurements are shown to compare closely with corresponding theoretical result it is compared with some variable frequency adjus table speed system comprising inverter and single - phase induction motor from the system efficiency torque pulsation and the effect of two - phase inverter capacitance based on the conclusion, harmonic cancellation pulse width modulation control of a two - phase inverter - fed induction - motor drive system is researched, which cancelled the low harmonic and improve the system performance

    通過對電機的kron變換和對稱分量變換,建立了系統較精確的數學模型,編制了系統動態及穩態運行的模擬計算程序分別計算系統的動態和穩態性能。通過對系統的具體參數進行了模擬運算和實驗研究,實驗和模擬結果進行比較,說明實驗和理論較為一致,並從系統效率、轉矩脈動及兩相逆變器電容的影響等方面與各種逆變器和單相異步電動機組成的變頻調速系統加以比較。在此基礎上,對兩相逆變器供電-異步電動機系統使用諧波抑制pwm控制進行了研究,由於減少了低次諧波,改善了系統性能。
  5. Owners of premises having high voltage fixed installations that are fed directly from a high voltage supply are required to have their high voltage fixed electrical installations inspected, tested and certified at least once every year

    房產如設有由高壓電源直接供電的高壓固定電力裝置,則該房產的擁有人須安排該高壓固定電力裝置每年最少作一次檢查、測試及領取證明書。
  6. The stator of aceg is connected to the grid and the three symmetrical excitation windings in the rotor are fed by converter. the magnitude and frequency and phase and phase sequence of excitation voltage can be controlled, so the magnitude and position of excitation mmf as well as the speed of rotor can be controlled. therefore, acegs have superior performances by contrast with conventional synchronous generators and induction generators, such as upstanding stability, power generation of variable speed constant frequency ( vscf ), adjusting active power and reactive power independently, and absorbing lag reactive power deeply

    交流勵磁發電機的基本結構與繞線式異步電機相同,其定子側接電網,轉子上採用三相對稱分佈的勵磁繞組,由變頻器提供對稱交流電勵磁,且勵磁電壓的幅值大小、頻率、相位、相序都可根據要求加以控制,從而可以控制發電機勵磁磁場大小、相對于轉子的位置和電機的轉速,使得交流勵磁發電機具有良好的穩定性及轉速適應能力、獨立的有功與無功調節能力和較強的進相運行能力,性能超越傳統同步發電機和感應發電機,因而有著廣闊的應用前景。
  7. Chapter 2 compares the differences of the current - fed converter and the voltage - fed converter used in induction heating power, and give a special focus on the voltage - feed converter, these content is the base of all the following chapters, and is the guideline of the project i did

    第二章對感應加熱電源中的電流型逆變器和電壓型逆變器作了比較分析,重點介紹了關于串連型感應加熱的特點,是后續各章節的理論基礎,也是所作課題的主要依據。
  8. Chapter 2 compares the differences of the current - fed converter and the voltage - fed converter used in induction heating power, then induces the power regulation methods of the series resonant inverter and compares the characteristic of these methods. and then, a capacitive pwm & pfm control method which is suitable for medium and small power out induction heating is given

    第二章對感應加熱電源中的電流型逆變器和電壓型逆變器作了比較分析,歸納了串聯諧振逆變器幾種常用的調功方法,對這幾種控制方法的優缺點進行了比較,提出了適用於中小功率感應加熱的容性pwm & pfm控制方法。
  9. Calculation of transient voltage distribution in windings of inverter - fed traction motor

    變頻牽引電機定子繞組暫態電壓分佈的計算
  10. Based on the analysis of the control theory of the dtc of doubly fed induction machines, in this paper, two control schemes are proposed : the least mode of rotor current and the stator power factor adjustable mode. in the first control scheme, we may make the rotor voltage the same or opposite phase with the rotor current by throwing suitable rotor voltage vector

    在第一種控制方案中,通過施加轉子電壓矢量,使轉子電流與轉子磁鏈垂直,轉子勵磁全靠定子電流,即可保證轉子電流和轉子電壓同相或反相,從而實現了轉子側功率因數為1 ,可減小轉子側變頻器的容量。
  11. The contributions done are as follows : according to the mathematical model of doubly fed motor and the theory of vector control, a unit power factor of rotor control scheme is proposed. in the doubly fed adjustment system, in order to control magnetic torque of motor this scheme is designed by controlling the reverse direction between rotor voltage and current to keep the vertical direction between rotor current and flux. it is known from theoretical analysis that for partly decoupling this scheme is only effective under sub - synchronization speed, but not control the system and obtain steady state since speed adjustment system ca n ' t adjust the magnitude of rotor flux under sup - synchronization

    而傳統的無速度傳感器雙饋調速矢量控制系統,由於採用磁鏈定向方法,在同步速附近存在較大的工作死區,針對上述問題,本文做了如下的研究工作:本文從雙饋電機的數學模型出發,根據矢量控制的基本原理,提出了一種轉子側功率因數為1的雙饋電機矢量控制方案的設想,即在雙饋調速時採用轉子電流定向的方法,並控制外加轉子電壓與轉子電流始終反相,以保持了轉子電流與轉子磁鏈矢量垂直,通過控制轉子電流的大小來達到控制電機電磁轉矩的要求。
  12. Rotating electrical machines - part 18 - 41 : evaluation and qualification of electrical insulation systems used in rotating electrical machines when fed from voltage converters iec 2 1276 cd : 2003

    旋轉電機.第18 - 41部分:由電壓轉換器饋電的旋轉電機用
  13. It can improve the utilize of power by fed back the power generated by motor machine to power - net, has the benefit of improving power factor, reducing the harmonious feeding back to the power - net and can enhance the performance of converters for the constant voltage of dc - link

    該裝置能夠提高電能的利用率,把由電動機產生的再生能源回饋到交流電網,並且能提高裝置的功率因數,減少對電網的諧波污染。由於pwm整流,變頻器中間直流環節的電壓能保持穩定,提高了逆變器的調速性能。
  14. When the motorcycle is braking or slowing down, the kinetic and / or potential energy is fed back to the battery, so the running distance can be extended and the energy efficiency is improved. an asynchronous motor is employed in this new system which can overcome the traditional dc drive system bugs and to reduce the cost and maintenance. in addition, the switches of dc / dc converter switch under zero current and zero voltage conditions, which can also reduce the switch losses, electro magnetic interference ( emi ) and prolong its life

    該系統在功能上實現了車輛剎車減速或下坡制動時能量的回饋,達到節能、提高能量使用效率和增加車輛行駛距離的目的;採用交流異步電機,克服了傳統直流驅動系統的諸多缺陷,降低了成本,減少了維護;採用zczvs技術,降低了電磁干擾和損耗,提高了效率;另外,在逆變主電路中採用ipm模塊,簡化了系統結構,節約了空間,提高了整個系統的可靠性和經濟性。
  15. The doubly fed induction machines speed adjustment system has the advantage of good speed adjusting behavior, low harmonic pollution, high reliability and cheap productive price. due to these characteristics, it is especially suitable for those situations with high voltage level, high power and not large speed adjustment range, such as wind machines and pump load

    感應電機的雙饋調速系統具有調速性能好、低諧波污染、可靠性高及造價低廉等優點,特別適合於高電壓、大功率且調速范圍不大的場合,尤其適用於風機、泵類負載。
  16. These illuminate that voltage vector control of a low power tow phase inverter - fed induction motor driver as a pulse width modulation control of a two - phase inverter - fed induction motor driver system can effectively cancelled the low harmonic and improve the system performance

    相對于方波等其它供電方式的控制,採用電壓空間矢量技術在小功率兩相異步電動機的變頻調速控制上的應用可使轉矩脈動減少,效率提高,具有一定的經濟性和實用性。
  17. Chapter 4 presents the design method of igbt full - bridge voltage - fed series capacitor compensated resonant induction heating inverter used capacitive pwm & pfm control method

    第四章給出了igbt器件組成的全橋串聯逆變感應加熱電源中應用容性pwm & pfm控制方法時電路各元器件參數的設計及計算方法。
分享友人