均勻成本 的英文怎麼說

中文拼音 [jūnyúnchéngběn]
均勻成本 英文
smoothing cost
  • 均 : Ⅰ形容詞（均勻） equal; even Ⅱ副詞（都; 全） without exception; all
  • 勻 : Ⅰ形容詞（均勻） even Ⅱ動詞1. （使均勻） even up; divide evenly 2. （分出一部分） spare
  • 成 : Ⅰ動詞1 （完成; 成功） accomplish; succeed 2 （成為; 變為） become; turn into 3 （成全） help comp...
  • 本 : i 名詞1 （草木的莖或根）stem or root of plants 2 （事物的根源）foundation; origin; basis 3 （本錢...
  1. There are many defects in the tic preforms prepared by cold pressing, such as small air holes and cracks. the tic preforms prepared by hot pressing have better qualities

    冷壓成型預制體一般存在分層、裂紋等缺陷，未造粒的粉體壓制時流動性、均勻性差是根本原因。
  2. Powder materials can be made into even granules customer needs without adding any bonding anent when they run througnh the machine. as density of granules are larger, no any afterward process is needed so as to reduce technological process, reduce granulation cost and powder pollution and improve labor environment as well

    粉體物料經本設備，無需添加任何粘結劑即可直接製成用戶所需的均勻顆粒產品，顆粒密度大，城無需再進行后續加工處理，減少了工藝流程，不僅降低了造粒成本，並且減少了粉塵污染，改善工人的勞動環境。
  3. Based on studying of the unequal rainfall in space - time and the asymmetry physical geography parameters in space, which can influence the process of the runoff, this paper puts forward a sort of slope conflux and watercourse conflux simulating model based on grid, and that gains flux at random time and grid in basin

    本模型針對降雨時空分佈不均勻與下墊面自然地理參數空間分佈不均勻，對產匯流形成過程的影響，提出了一種基於柵格的坡面產匯流與河道匯流的數值模擬模型。
  4. In order to solve the above - mentioned problems, the present invention provides a method for plating a polymer material with a metal film, which can form the film on the surface of polymer materials, which are difficult to plate by the prior wet plating method, at a relatively low cost in comparison to the dry plating method and exhibits a uniform thickness and a good adhesion of the metal film and further, shows a good reproducibility

    為了解決上述問題，本發明提供了一種給聚合物材料上鍍金屬膜的方法，用該方法可以在聚合物材料表面形成膜層，這是原來的工藝難于做到的，而且比干鍍成本低，鍍層厚度均勻，金屬膜的粘附性好，最後，還顯示出好的重現性。
  5. However geological information is fully recorded in the remote sensing image, which made it possible for the choosing of this area as a dissection point to extract complex structural information of orogenic belt in west china. taking fully advantage of multi - band image richly bearing concealed geological information in combination with remote sensing analysis and structure analysis, to anatomy the supracrustal composition and structure of orogenic belt with the regional linear structures and their partitioned block and schistous geological masses as the macro - frame ( in corresponding to structure units and structure segments ) and with the rock masses, structure - rock assemblages, line - featured and belt - featured structures as well as penetrative and non - penetrative foliation ( primary stratum and trans position layering ) and folds as the texture and structure elements. the methods of how to distinguish granulite > ductile - shear zone, imposed fold, different deformed belts -

    因而，本文選擇這一地區作為我國西部地區從遙感圖像上提取造山帶復雜結構構造信息的解剖區，充分利用遙感圖像多波段反映物質屬性的特點和圖像處理提取隱含信息的優勢，採用遙感解析?構造解析相結合的研究方法，以區域線狀構造及由它劃分的塊狀、片狀地質體為宏觀骨架（對應于構造解析劃分的構造單元、構造均勻區段） ，以地質體中的巖石巖體、構造巖石組合，線狀、帶狀構造，透入性、非透入性面狀（原始層理、新生面理）和褶皺等構造作為用於解析的結構構造要素，進行造山帶表殼組成和結構構造解析研究。
  6. Led module is made with led of high brightness and wide viewing angle 60, it have great ray effect, energy saving and environmental - protecting. the life time is about 50000 - 80000hours, and work with low voltage dc12v. the imput current of each module is 25ma, red, yellow, blue, green, white etc color are available

    Led模組使用壽命長50000 - 80000hrs .模組省電低成本： 12vdc低電壓高光效能， led模組比霓紅燈節省電力70 % . led模組廣角度均勻色澤： led廣告發光模組角度范圍60 - 160度
  7. In recent years, plentiful and substantial fruits achieved by the lb method in simulations of hydraulics, multiphase flows, flows in porous media and heat transfer as well as magnetohydrodynamics, have revealed a broad perspective of application of this method, it will become a powerful competitor to the conventional approaches. in order to absorb the recent achievement in theory and application of the lb method, explore new ways in hydraulic computation to promote the development of practice, some work is car ried out in this thesis, as following : advances in the theory research and application, deductive process of the d2q9 model and some other commonly used models of the lb method are summarized. based on the hydrodynamic and general boundary conditions, a new joint boundary condition is presented, it integrates advantage of the two conditions above and obtains very good results in dealing with all kinds of boundaries of flow fields

    為了消化和吸收近年來lb方法在理論和應用方面的新成果，探索在水力計算方面的新途徑以促進lb方法實用化的發展，本文進行了下列研究工作：綜述了lb方法在理論研究和實際應用方面的新進展，以及d2q9模型的推導過程和其他一些常用的模型；在水動力邊界條件和通用邊界條件的基礎上提出了一種新的聯合邊界條件方法，它綜合了上述兩種邊界條件的優點，在流場的各種邊界處理中取得了非常好的效果，經過模塊化的處理以後這種邊界條件具有更好的實用性；針對均勻網格的lb方法計算效率較低的不足，提出了雙重網格的latticeboltzmann方法，通過二維poiseulle流動、后臺階流動和渠道方槽流動三個算例的模擬，證明這種方法能夠明顯地提高流場模擬的計算效率；此外，根據復雜區域流場的特徵提出了latticeboltzmann方法的分塊-耦合演算法，利用lb方法的計算特性實現塊與塊之間的數據交換，充分利用計算資源提高計算效率，通過對「 t 」型、 「十」型和「 x 」型分岔管道流場的模擬，展示了這種演算法的特徵和優點，以及它所具有的應用前景。
  8. One of our major products is a margarine or butter production machine suite that produces and forms homogeneous margarine using an original cutting method for forming strip - shaped pieces in any of 60 different sizes according to the user company s needs. the machine also packs these pieces in sheets and then stacks the packed sheets several layers deep in cardboard boxes

    質地均勻的麥淇淋經過加工整形製成帶狀成品輸送給各大企業，共有60種尺寸規格，採用獨特切斷法，包裝呈薄片，用多層組合瓦楞紙板裝箱的器械在日本全國史無前例，各器械均有專利權，在油脂行業擁有很高市場佔有率。
  9. At the same time, in the field of warm extrusion forming technique for pockety wall thickness forging, the research conclusion of this paper has important leading meaning and application value

    同時，本論文的研究成果對非均勻壁厚鍛件的溫擠壓成形工藝研究有重要的指導意義及實用價值。
  10. This dissertation emphasizes on the creation of image space, the author present a display system in which screen moves with a sinusoidal velocity profile to create image space. this paper uses linear approximation to make the system display homogeneous graphic and analyzes worst - case positional error due to linear approximation

    本論文重點分析了顯示單元中成像空間的構造，提出屏幕按正弦曲線運動的方式來構造成像空間，用線性近似的方法得到均勻的圖像，並分析了由於線性近似帶來的最大屏幕位置誤差。
  11. The particles distributed hi the matrix of grey cast iron, but some contact each other. the composite layer extend gradually into the substrate. when volume fraction of wc is 36 wt % and 27 wt %, the matrix of the composite is high chromium cast iron, consist of white carbide bars and the austenite. wc particles distributed uniformly, retaining approximately quondam granular form in the composite layer which has an evident interface area with the substrate, with good bonding strength

    對不同碳化鎢體積分數的灰鐵和低鉻鑄鐵基復合材料的微觀組織結構分析表明：碳化鎢體積分數為52時，復合層內基體為灰口鑄鐵組織，顆粒直接分佈在灰鐵基體上，部分碳化鎢顆粒有相互接觸的現象，基材與復合層之間沒有明顯的過渡；碳化鎢體積分數為36 、 27時，復合層內基體為高鉻鑄鐵，由面塊狀的奧氏體和白條狀碳化物組成，碳化鎢顆粒表面固溶於基體組織中，粒形基本保持完整，分佈均勻，與基體構成冶金結合，基材與復合層之間存在一個明顯的平緩過渡區。
  12. We found that if the coin is fair, you will be able to start from a very small capital, say ? > 0, by means of legal trading, to obtain a very large profit, say a / < < x >, with a probability very close to 1, say 1 - a. ve will call this situation an opportunity of essential arbitrage. we feel that it is unreasonable to consider such a financial market & perfect

    我們發現如果硬幣是公平的（均勻的） ，你就有可能「從任意小的初始資本0出發，經過合法的交易，以任意接近於1的概率（容許取極限，甚至可以達到概率1 ）獲得預先指定的（可以任意大的）目標盈利m 」 ，我們把這種可能成為「可本性套利」 。
  13. According to impurity inspection, spinning mill could accurately compute the amount of cotton required and through adopting the correct technologic methods, finished yarn could decrease the defects, reduce the cost, improve the quality and uniform the strips

    棉紡廠可以據此正確計算用棉量，採用相應工藝措施，使成紗疵點減少，條干均勻，提高成品質量，降低成本，所以雜質檢驗具有重要意義。
  14. When the atomic ratio of nb is one, the structure is homogeneous and almost composed of the single sm2fe17 phase. it ' s nearly the same structure as that after annealing. so it can reduce the production cost and increase the stability of magnetic properties

    當nb的原子比為1時的鑄態組織基本為均勻的接近單相的sm _ 2fe _ （ 17 ）組織，已接近於退火后的組織，從而可以避免冗長的均勻化退火化過程而直接用於製造永磁體，極大的降低了生產成本，並能有效的提高磁性能的穩定性。
  15. The highlights of this paper include : hoop toughness criterion for longitudinal heat checking of tool joint was introduced firstly ; failure criterion for crescent - shaped wear casing was established according to the results of full - scale collapse tests ; new - typed alloy for hardbanding of tool joint was developed, its property has showed good performance in the tests

    本文的主要創新點在於：以現場失效案例分析為基礎，提出了鉆桿接頭縱向熱裂的橫向韌性判據；通過對已磨損套管的實物擠毀試驗研究，確定了不均勻磨損套管的擠毀失效準則；設計出了具有獨立知識產權的鉆桿接頭硬化帶用新型耐磨減摩合金的成分，經實驗室試驗表明其性能可以達到或超過國外同類產品。
  16. Numerical test shows that the method presented in this paper can be applied in the lateral inhomogeneity study of the earth interior

    數值檢驗表明，本文所提出的橫向非均勻介質接收函數的數值模擬與偏移成像可用於地球內部介質橫向不均勻性的研究。
  17. From this point, whether even design method could accomplish the task of pusher - dimension is still a question. in this paper, even design method has been used in both pusher - dimension optimization and fleet assignment, exploring its effectuation

    通過查閱大量文獻，本論文給出了許多初估推船主尺度的經驗公式，船型方案的組成則在此基礎上，採用均勻設計法來完成，這是本論文具有創造性的一處。
  18. In a situation that various kinds of concrete material, admixture and match ratio certainly, in order to be up to various kinds of even distribution which make up the material, form good inside micro organization and structure, vibration is it as concrete making lawing of filling a prescription basic, play an extremely important role to mix

    在混凝土各種組成材料、外加劑和配合比一定的情況下，為了達到各種組成材料的均勻分佈，形成良好的內部微觀組織和結構，振動攪拌作為混凝土基本的制配方法，起著極為重要的作用。
  19. Inorganic salts, such as a1 ( no3 ) 3, zrocl2, ticl3, et al. was used as raw materials and corresponding hydroxides were deposited on the surface of graphite particle with heterogeneous nucleation process ; composite particles of graphite / oxides were obtained after heat treatment. in this paper, preparing conditions and properties of composite particles were studied

    本論文以無機鹽（硝酸鋁、氧氯化鋯、三氯化鈦等）為原料，在石墨的稀懸浮液中應用非均勻成核技術，使水解產物（水合氧化物）沉積到微米級鱗片石墨表面，經洗滌、烘乾和熱處理制備出石墨氧化物復合粉體。
  20. This part emphasizes the synthesis of nanoarrays, aiming at controlling the size and distance of nanocrystallites using calixarene derivatives by altering the size, length and chemical structure of the organic molecules ; 2. this part emphasizes in situ synthesis strategy for fabrication of polymer network of zns based nanopowder, aiming at size controls, coating and preventing agglomeration following " one - pot " synthesis ; this method fits to low cost, large scale production ; 3. according to development in zno nanomaterials, we first report on the synthesis, characterization of amorphous zno, aiming at describing the principles and approaches of synthesis techniques, optical properties, spatial structure and doped effect ; the amorphous zno displays cage - like structure, showing a strong ultraviolet emission while the visible emission is nearly fully quenched, a potential uv - emission material ; 4

    本論文以量子結構自組裝為出發點，提出利用杯芳烴及其衍生物的化學受限反應實現尺寸可調半導體納米粒子自組裝；提出有機聚合網路原位組裝zns基納米熒光粉方法，把熒光粉的納米化、包敷、防團聚在「一鍋」反應中完成，適于低成本，批量生產；根據當前zno的研究情況，我們首次合成了非晶zno ，研究了它的光學性質，確定了它的結構，並對其摻雜進行了初步的研究，非晶zno表現出強的深紫外發光特性，而可見發射非常弱，是一種有巨大潛在應用價值的深紫外發光材料；利用非晶zno的亞穩特性，對晶化過程中非晶zno納米晶zno三維受限量子結構特性，界面特性進行了深入的研究；利用固相熱分解一般受擴散控制特性，實現了尺寸可控的zno三維量子結構的自組裝；利用非晶zno的高度分散性，容易均勻成膜特性，實現了非晶籽晶誘導低溫液相外延自組裝生長高取向zno晶體薄膜。
分享友人
分享到 Line

分享到臉書