延滯部分 的英文怎麼說

中文拼音 [yánzhìbùfēn]
延滯部分 英文
delay section
  • 滯 : Ⅰ動詞（使停滯; 使不流通） stagnate; block up Ⅱ形容詞（停滯; 不流通） sluggish; slow-moving; stagnant
  • 部 : Ⅰ名詞1 （部分; 部位） part; section; division; region 2 （部門; 機關或組織單位的名稱） unit; mini...
  • 分 : 分Ⅰ名詞1. （成分） component 2. （職責和權利的限度） what is within one's duty or rights Ⅱ同 「份」Ⅲ動詞[書面語] （料想） judge
  • 部分 : （整體中的局部或個體） part; section; portion
  1. In this thesis, four types of steel beam - rectangular cfst column connections, including normal welded flange plate ( wfp ) connection, bolted flange plate ( bfp ) connection, stiffened end plate ( sep ) connection and double split - tee plate ( dst ) connection, were designed based on the configuration of steel frame connection. total 8 models, 2 models of each kind of connections were tested under low - reversed cyclic loading at the end of cfst columns. the relationships between force and displacement at the end of columns, the relationships between the moment and rotation of the joints, degradations of strength and stiffness, ductility, failure mechanism and failure characteristics of these four connections under different axial - compression ratios were presented

    本文借鑒鋼框架節點構造，設計了四種類型矩形鋼管混凝土柱與鋼梁連接節點，包括常規栓焊（ wfp ）節點、翼緣全螺栓連接（ bfp ）節點、雙t板連接（ dst ）節點以及加勁端板連接（ sep ）節點，進行了四類節點8個模型試件在柱端低周反復荷載作用下的抗震性能試驗研究，比較了不同軸壓比下節點的滯回性能、強度與剛度退化、延性、破壞機理與破壞特徵，主要結論有： 1 、節點的位移滯回曲線與轉角滯回曲線為塊型分佈，沒有或略有捏攏現象，耗能能力強； 2 、軸壓比對節點滯回曲線有顯著影響，全部節點都有顯著的剛度退化； 3 、位移與轉角骨架曲線在峰值荷載後有較長的水平或下降段，具有良好的延性性能； 4 、從整體抗震性能上看，翼緣全螺栓連接節點、雙t板連接與加勁端板連接節點都優于常規栓焊節點，可在實際工程中加以推廣。
  2. Its hysteretic curve is plumper, its ductility coefficient and energy dissipation capacity have been improved remarkably. the inclined staff of the steel bar truss has a restraining faction to the development of the crack, and the phenomena is that there has more crak and larger distributing area on the shear wall, which is an important token of the improved seismic capacity. concealed steel bar truss has the faction of increasing the height of plastic hinge area, which is another important token of

    研究結果表明:內藏鋼桁架高剪力墻與普通高剪力墻相比:屈服荷載和極限荷載均比顯著提高;屈服剛度明顯提高;其滯回環相對飽滿，延性系數及耗能能力顯著提高;內藏鋼桁架高剪力墻，其鋼桁架斜桿對裂縫發展有控製作用，現象是墻體上的裂縫較多、分佈域較廣，這是抗震耗能能力增強的重要表徵;內藏鋼桁架高剪力墻有增大底部塑性耗能區域的作用，這是抗震耗能能力增強的另一重要表徵;內藏鋼桁架還有顯著提高抵抗剪力墻基地剪切滑移能力的作用。
  3. The low - cyclic reversed loading tests of two unbonded partially prestressed concrete frames with different ppr have been carried out. the aseismic behaviors are analyzed and compared, with emphases on failure mechanism, hysteretic property, displacement ductility, energy - dissipation capacity as well as stiffness degeneration, etc. the results show, when designed rationally, the unbonded partially prestressed concrete frames can form beam hinge energy - dissipation machine and total destroy mechanism

    通過兩榀不同預應力度的無粘結部分預應力混凝土扁梁框架結構的低周反復荷載試驗，分析研究了無粘結部分預應力混凝土扁梁框架結構的破壞形態、滯回特性、位移延性、耗能能力、承載力及剛度退化等抗震性能。
  4. Through setting interior drainage system, water saved in the pavement structure can be eliminated from subgrade and pavement structure, and it does good to improve the pavement performance and prolong the service life of pavement

    設置路面結構內部排水系統，能夠將積滯在路面結構內的水分迅速地排出路基、路面結構外，有利於改善道路的使用性能，延長路面的使用壽命。
  5. Made up of two - storied lower huge platforms and three - storied upper building structures in the scale of 1 / 4 from the prototype, the model is tested under cyclic loading, and thus conducting the experimental study of the structure ' s capacity, stiffness, ductility, hysteresis capacity, yielding mechanism and failure phenomenon

    通過對包括有大平臺兩層結構和上部三層結構的四分之一縮尺模型，在低周反復荷載作用下的試驗研究，重點分析了大平臺上部結構和下部結構的承載力、剛度、延性、滯回特性、屈服機制和破壞特徵等。
分享友人
分享到 Line

分享到臉書