扭剪力 的英文怎麼說

中文拼音 [niǔjiǎnlì]
扭剪力 英文
torsional shear
  • 扭 : 動詞1 （掉轉; 轉動） turn round 2 （擰; 旋轉） twist; wrench 3 （擰傷） sprain; wrench 4 （走路時...
  • 剪 : Ⅰ名詞1 （剪刀） scissors; shears; clippers2 （姓氏） a surname Ⅱ動詞1 （用剪刀等使細的或薄片的東...
  • 力 : Ⅰ名1 （力量; 能力） power; strength; ability; capacity 2 [物理學] （改變物體運動狀態的作用） forc...
  1. Shear stresses and shear strains in prismatic members may be caused by either torsional moments, or by shear forces associated with flexure.

    在等截面桿件中，剪應力和剪應變可以由扭矩引起，或者由變曲相關的剪力引起。
  2. Shear force and torsion effects can be taken into account in a similar way, by the addition of further terms.

    相似地，追加更多項就可以考慮剪力和扭矩的影響。
  3. We are specialized in producing sets of large - hex high - strength bolts, sets of torshear type high - strength bolts, sets of dacrolon bolts and cheese head studs for arc stud welding

    我公司技術力量雄厚，生產設備精良，檢測設備完善，是生產鋼結構用高強度大六角螺栓連接副、扭剪型螺栓連接副、達克羅螺栓連接副和電弧螺柱焊用圓柱頭焊釘的專業公司。
  4. Saturated sand are testes in the laboratory under the undrained cyclic loading condition with static - dynamic dual purpose triaxial compression test apparatus, which is designed under the cooperation of hohai university and marui co. ltd japan. the results indicate that the stress path approaches from a initial stress point to the failure lines as cyclic loading goes on, and eventually converges on a certain limiting stress path in the vicinity of the failure lines. the stress - strain curve, however, does not converge on a closed hystersis loop ; the shear strain rapidly increases in looser sand or gradually and continually increases in denser sand

    利用河海大學與日本圓井株式會社共同研製的新型的多功能靜動三軸儀進行了飽和砂土循環扭剪不排水試驗，研究表明，對于松砂，剪應變幅度快速地由微小增加到百分之幾甚至百分之十幾，對于緊砂，剪應變幅度逐漸地由微小增加到百分之幾甚至百分之十幾；經試驗初步研究表明用初始有效平均正應力歸一化的有效應力路徑很好的一致性。
  5. Sakashita, m., kono, s., tanaka, h., and watanabe, f., " lateral force resistance mechanism of a multi - story shear wall and peripheral members, " proceedings of the 7th japan - taiwan - korea joint seminar on earthquake engineering for building structures ( seebus 2005 ), seoul, korea, pp. 11 - 20 ( 2005 )

    方一匡，張簡建良，林廷駿， 「自充填混凝土梁在彎矩，剪力及扭矩組合載重之承力行為」 ，高性能混凝土在結構工程應用之研討會論文集，臺南，第211 - 246頁（ 2005 ）
  6. Wind pressure on the construction surface. shearing force, bending moment and twisting moment come into being when wind acts on structures

    當風作用於結構時，在建築物表面形成風壓，從而對建築物形成剪力、彎矩和扭矩。
  7. Analysis of prototype with frame - bent in the longitudinal direction and frame - shear wall in the transverse direction under the earthquake with peak acceleration 50gal. is conducted. the following subjects are concerned : the dynamic properties, the torsional effect on the structure, split lever influence on the distribution of the shear forces in the columns, the mechanic of the frame corporation with the bent

    在試驗研究的基礎上，對橫向框排架、縱向框架?剪力墻結構的整體廠房進行平扭耦聯的地震反應分析，研究了該類結構的動力特性、扭轉對整體結構受力的影響、層間變形及扭轉效應、框架與排架的內力分配、錯層對該層各柱剪力分配的影響、相應的簡化計算方法等相關內容供設計時參照。
  8. The concept of the equivalent mode and the modal participation coefficient is introduced when the regulation structures are studied. as to the vertical irregular structural systems, the inter - story capacity spectrum method is used and the strength reduction coefficient 77 is put forward when the capacity method is used to evaluate the performance of the torsional irregular structures

    對于扭轉不規則結構體系，引入與結構偏心矩大小和結構平面整體尺寸有關的強度降低系數叮來考慮結構的扭轉效應，選取結構的基底剪力和邊軸線的最大反應位移為參數，應用能力譜方法進行抗震性能評估。
  9. Besides, on the basis of the test data under bending and torsion and the theoretical analysis on the tubular, the relative relationship between the bearing values is derived. second, based on the elastic theory, this paper deduces the rules of stress distribution and main physical and geometric parameters by analyzing the elastic stress distributions when the tubular is under such conditions as torsion, bending, shearing, combined bending and torsion, and combined shearing and torsion ; additionally, taking the strength criteria of concrete and steel as reference, the paper proposes a set of theoretic equations for the relative relationship between the bearing values

    本文利用彈性理論對扭轉、彎曲、剪切、彎扭聯合作用、剪扭聯合系列作用下的構件彈性應力分佈進行了研究，得出應力分佈與主要物理和幾何參數的規律；同時引入混凝土及鋼的強度準則，得出了彎扭、剪扭復合應力作用下的承載力相關關系的理論方程，可供工程設計使用。
  10. And a post - liquefaction test method has been put forward, in which the cyclic loading and the static loading courses are both controlled by stress mode. this method reflects the in - situ conditions well and truly, and a lot of tests have been done using this method. in these tests the effects of confining pressure, relative density, liquefaction severity etc. have been thoroughly investigated

    主要工作內容如下：參與研製了振動扭剪全自動多功能三軸儀，並利用其獨特試驗功能設計了一套飽水砂土液化后特性的試驗方法，試驗過程中模擬地震作用的動加載過程及模擬大變形發生的靜加載過程均採用應力控制的方式進行，試驗方法跟現場條件更為接近並用該試驗方法對相對密實度、固結壓力、液化度等對液化后變形特性的影響進行了研究。
  11. On the basis of comprehensive analyses and studies, now the centrifuge concrete filled thin - walled steel tubular is regarded as one of the ideal substitutes of the traditional concrete poles, and there has been a practical call for the researches on it unfortunately, present evidence is all for the capabilities of the tube under single load but there is hardly any datum relating to those under the combined loads of bending and shearing torsion that many members applied in electric power projects inevitably bear to different extent. this paper intends to improve this situation with the experimental researches and related theoretical analyses done on the subject

    在電力工程結構中，由於使用功能要求，許多結構中不同程度地存在著受扭工作狀況，及彎扭、剪扭聯合作用工作狀況，然而迄今為止，國內外對離心鋼管混凝土結構的工作性能的研究大多局限在單一荷載工況情況下，尚未見組合荷載作用的研究，因此，能否深入了解離心鋼管混凝土構件的扭轉和在組合作用下的受力特性，成為影響該結構形式能否進一步推廣應用和發展的關鍵技術問題。
  12. In the past, there were a large number of research studies on the behaviour of concrete - filled steel tubes ( cfst ) subjected to compression, bending or combined compression and bending, and there were a few research studies on the behaviour of cfst subjected to pure torsion, compression - torsion, bending - torsion, compression - bending - torsion and compression - bending - shearing. however, the behaviour of cfst members under complicated loading conditions still needs to be studied deeply

    以往，研究者對鋼管混凝土構件在軸壓、純彎和壓彎荷載作用下的性能進行了大量研究，對純扭、壓扭、彎扭、壓彎扭及壓彎剪受力狀態下的工作性能也有一些研究報道，但研究工作，尤其對壓彎扭剪構件的工作機理的研究仍有必要深入進行。
  13. In this paper, some aspects such as the behavior of pore pressure of unsaturated loess, the dynamic constitutive relationship and the characteristics of the dynamic modulus, dynamic strength and dynamic damping ratio are studied with the dynamic torsional shear test of loess

    在以上研究的基礎上，本文又通過黃土的動扭剪試驗研究了非飽和黃土的孔隙壓力特性、動本構關系、動剪切模量特性、動強度特性以及動阻尼比特性。
  14. The pore air pressure gradually goes up with the developing of axial strain in the process of the dynamic torsional shear test of loess, but the pore water pressure hold the line or goes up a little in the last. the stress - strain dynamic constitutive relationship of intact loess and man - made loess show the hyperbolic model. there are some remarkable differences of strength and strain between unsaturated loess and saturated loess

    研究結果表明：非飽和黃土在動力扭剪試驗過程中，隨著軸向變形的發展，孔隙氣壓力逐漸上升，而孔隙水壓力則基本保持不變或後期略有升高；原狀黃土和重塑黃土的應力應變本構關系呈雙曲線型；非飽和黃土和飽和黃土的強度及變形特性存在明顯差異；進而分析了含水量、固結應力和固結應力比對黃土動力特性的影響本文最後對非飽和土的有效應力計算公式進行了討論。
  15. Calculation method of torsion effect in frame - shear wall structures

    剪力墻結構扭轉計算方法
  16. From the point of the behavior of spandrel beam in the course of test, there are four clearly stages based on the three characteristic points : bending cracking of floor beams through the column, diagonal cracking of spandrel beams and / or bending cracking of floor beams above the spandrel beams ( including floor ) and bending yield of floor beams through the column. in the last stage, the torque of spandrel beams seems more like an equilibrium torque than a compatibility torque. the law of

    從邊主梁的受力看，以過柱子次梁的彎曲開裂、邊主梁的扭剪開裂以及樑上次梁（包括樓板）的彎曲開裂和過柱子次梁的彎曲屈服為受力特徵點劃分為四個受力階段，其中邊主梁在過柱子次梁的彎曲屈服后的受扭則更多地具有平衡扭轉的性質，而在這以前是協調扭轉。
  17. The ratio of story shear rigidity as well as the equivalent lateral rigidity ratio of story above the transfer story to the story under the transfer story should be designed properly to avoid the transfer story becoming weak story, thus the shear walls and the columns in the large base will not yield before the elements above the transfer story ; ( 2 ) the translation - torsion coupled effects and the vibration in the plane should be considered in analysis of structure with large base and muti - towers

    轉換層的設計除應控制層剪切剛度比外，還應控制轉換層上部與下部結構的等效側向剛度比以避免薄弱層出現在框支層，保證地震作用下落地剪力墻和框支柱不先於轉換層上部結構進入屈服狀態；大底盤多塔樓結構的分析必須考慮平扭耦聯振動和樓板平面內振動的影響。
  18. Through the test of the separating sieve ' s and beams vibration acceleration, the dynamic bending moment, torque and shearing force as well as the analyze of each parameter by dividing rotation speed range from 300 r / min to 600 r / min of the main shaft, the change regularity of the vibration of the separating sieve, the vibration and the dynamic load on dangerous cross section with the change of rotation speed of the main shaft is obtained. research shows that there exits apparent relevance between the vibration as well as the dynamic load of the main beam and the vibration of the separating sieve. the vibration of the separating sieve mainly affects the composition of low frequency of the vibratio n of the main beam, appropriately amending the vibration acceleration of the separating sieve, the loading and vibration of the mam beam can be directly improved

    通過分檔測試主軸轉速在300 600r min范圍內分離篩與梁的振動加速度、梁所承受的動態彎矩、扭矩和剪力以及各參量的時頻域分析，得到了主軸轉速與分離篩振動、主梁的振動及其危險截面的動態載荷間的變化規律，研究表明梁的振動和其所承受的動載與分離篩的振動之間具有明顯的相關性，分離篩的振動主要影響梁振動的低頻成分，適度改善分離篩的振動加速度，可直接改善梁的負載和振動特性。
  19. The whole building can be equivalent to a cantilever bar, and the structural total displacements can be divided into parallel displacement and rotational displacement based on the harmonize condition of displacement, and the parallel shear and the rotational shear of the elements can be accordingly obtained by selecting the renegade body from top to bottom in turn

    根據位移協調條件，將結構的位移分解成平動與轉動成分，得到相應的結構平動時構件所承擔的剪力與結構轉動時構件所承擔的剪力，再根據力的平衡條件，推導出雙向地震作用下考慮構件抗扭剛度時結構的線彈性扭轉角，並對構件的剪力及變形進行了修正。
  20. Based on the theory of thin - walled curved bar, reasonable hypothesized a third - ord parabolic curve, the paper adoptes variational method on energy, taking the coupled relationship of the effect of curvature radius, bend, torsion and shear - lag into consideration, establishes the elastic governing differential equation and boundary conditions for thin - walled curved box girders, which set the foundation of theoretical analysis of shear - lag effect in thin - walled curved box girders

    摘要文章以薄壁曲桿理論為基礎，合理地假設了三個剪力滯翹曲位移函數，應用能量變分法推導出考慮曲率半徑影響、彎、扭、剪力滯耦合的曲線箱梁彈性控制微分方程及其邊界條件，為薄壁大麴率箱梁剪滯效應建立了理論分析基礎。
分享友人
分享到 Line

分享到臉書