拉強筋 的英文怎麼說

中文拼音 [lāqiángjīn]
拉強筋 英文
brace
  • 拉 : 拉構詞成分。
  • 強 : 強形容詞（強硬不屈;固執） stubborn; unyielding
  • 筋 : 名詞1 （肌的舊稱） muscle2 [口語] （肌腱或骨頭的韌帶） tendon; sinew 3 [口語] （可以看見的皮下靜...
  1. He worked on the jump hooks and short jumpers he hopes will become staples of his game

    避免新賽季腳筋再次拉傷，他加強了勾手投籃和短距離跳投練習。
  2. Here the hsc of sompa is achieved through adding super - effective water reducer, fined slag and silicon fume, and decreasing the water / cement ratio. by varying the area ( spacing ) of tension bars, compressive bars, vertical links and distribution steel and embedding steel fiber and polypropylene fiber we try to improve the behaviors of reinforced high performance concrete one - way spanning slabs in bending, so that its ductility be greater than 5. with the same arrangement of steel the width of bending member is varied to observe the effect of the width / depth ratio on the ultimate compressive strain of concrete

    通過變化受拉筋含筋率和受壓筋、箍筋（鉤筋、分佈筋）含量，或摻加纖維使之成為鋼纖維高強混凝土（ sfrhsc ）和聚丙烯纖維高強混凝土（ pfrhsc ） ，對高強混凝土雙筋截面梁、板的受彎性能進行了試驗研究，試圖改善高強混凝土受彎構件的延性，使其延性比大於5 ；並在相同配筋情況下，通過變化截面寬度，研究了高強混凝土受彎構件的寬高比對壓區混凝土極限應變的影響；並對試驗構件的裂縫發展情況進行了觀測。
  3. Tensile ultimate strength of steel

    鋼材鋼筋抗拉極限強度18
  4. Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete

    混凝土預加應力用熱軋和熱軋並處理的高抗拉強度的合金鋼筋規范
  5. Fiber reinforced plastic rebar ( frp ) is a new composite, which is composed of fiber acting as reinforced material, synthetic resin acting as matrix, and some adequate auxiliaries, and is formed through a pultrusion process and necessary surface process. it has a high strength to weight ratio, excellent non - corrosive characteristic, fatigue - resistant characteristic, strong designability and magnetic neutrality, so it can be used in the applications with special performance requirements or where reinforcing bars are subjected to severe chemical attack

    纖維增強塑料筋是以纖維為增強材料，以合成樹脂為基體材料，並摻入適量輔助劑，經拉擠成型技術和必要的表面處理所形成的一種新型復合材料，具有比強度高、耐腐蝕性能好、可設計性強、抗疲勞性能好、耐電磁等獨特優點。
  6. The results indicate that the ratio of span to rise, the ratio of reinforcement and the stretching controlling stress are the three primary influencing factors to the failure pattern of the slab. in addition, the relationships between the ratio of deflection to span and the ratio of span to rise and the stretching controlling stress submit to linear curves, the relationship between the ratio of deflection to span and the ratio of reinforcement submits to a quadratic parabola curve

    運用數值分析程序計算了175組不同跨高比、配筋率、張拉控制應力的中強（ 1270mpa ）螺旋肋鋼絲預應力空心板，結果表明跨高比、配筋率、張拉控制應力是影響空心板破壞形態的主要因素，且構件撓跨比與跨高比和張拉控制應力呈線性關系，與配筋率呈二次拋物線關系。
  7. Taking an ultimate deflection more than 1 / 50 of calculating span as the determinant term, by the means of numerical analysis and regress equation respectively, this paper discusses the reasonable stretching controlling stress of usual span and reinforcement slabs for design reference

    以極限撓度達到跨度的1 50作為延性破壞的判定指標，本文分別運用數值分析程序試算和回歸方程得出了常用跨度、常用配筋的中強（ 1270mpa ）螺旋肋鋼絲預應力混凝土空心板的張拉控制應力的取值，供設計參考。
  8. It shows that the method suggested in the paper is simple, applicable for engineering and has good precision. on the bases of the formulas deduced, and combining with relative test datas, it studies in the paper several factors influencing the bearing performance of the simple beams, such as shape of the external tendons, the equal moment segment length, span - to - depth ratio of the beam, valid initial prestress of the external tendons, area of the internal tension reinforcement, strength of the concrete, vertical distance between

    在公式推導的基礎上，結合相關試驗資料，研究了體外筋的形狀、等彎矩區長度、梁跨高比、有效張拉預應力、體內受拉筋配筋率、混凝土強度、錨固點到樑上邊緣在垂直方向上的距離、體外預應力筋水平段長度（雙折線型體外筋的情況）以及荷載類型等對體外預應力混凝土簡支梁受力性能的影響。
  9. The results of experiments shows that core column can increase flexural and shear resistant capacity and improve deformability and entirety of composite walls ; it is coordinate ductility of two composite walls joining wire or steels out - of - plane ; the seismic of composite walls joining with wire is fine than joining with steels ; the deformation of out - of - plane only affect the crack - loading, the ultimate carrying capacity and ductility in - plane nearly has no change

    墻片試驗表明:芯柱可以增加復合墻體的抗彎和抗剪承載能力，改善墻體的變形能力和整體性;分別應用鋼絲網片和鋼筋連接的兩種復合墻體的平面外延性大致相同，內外葉墻協同工作良好;內外葉墻之間的連接提高了外葉墻砂漿層抗拉強度，同時也提高了復合墻體向外葉墻方向的抗推和抗拉承載力。
  10. The research works and conclusions of this paper as following : 1. besed on the test results published over the word of reinforced concrete beams without web reinforcements and with stirrups, the systematically statistical analysis is carried out to set up the fomula of shear resistance of reinforced concrete beams using the uniaxial tensile strength of concrete. it provided the basis of strtistical analysis for shear resistance of steel fiber reinforced concrete beams

    根據收集到的國內外對鋼筋混凝土無腹筋梁和鋼筋混凝土有腹筋梁的斜截面承載力試驗研究成果，進行了比較系統的綜合統計分析，提出了採用混凝土軸心抗拉強度研究成果，進行了比較系統的綜合統計分析，提出了採用混凝土軸心抗拉強度指標的鋼筋混凝土梁斜截面承載力計算公式，為鋼筋鋼纖維混凝土梁受剪承載力試驗結果的統計分析提供了基礎。
  11. With the prerequisite of meeting requirement of its working performance, the mix design of common grades can be concluded though strength test if we check various property of the said concrete with the certain mix design, such as compressive strength, tensile strength, elastic modulus, reinforcement wrapping strength, leakage resistance, shrink property and charring resistance, and compare them with property of ordinary concrete, we will find that the various dynamic property of self - densifying high performance concrete is very satisfactory and the durability is quite ideal

    在滿足自密實高性能混凝土工作性能的前提下，通過強度試驗得出常用強度等級混凝土的配合比，檢測該配合比下的自密實高性能混凝土的抗壓強度、劈裂抗拉強度、彈性模量、鋼筋握裹力性能、抗滲性、收縮性、抗炭化性等性能，以及各種性能與普通混凝土的比較，驗證自密實高性能混凝土硬化后的各方面力學性能是完全能夠符合要求的，並且具有較高的耐久性。
  12. Gfrp bar is a new antisepsis material and it have many availabilities, such as the resistance to corrosion, high strength - to - weight ratio, low electromagnetic properties and so on. however, to fully replace steel by gfrp bar, some aspects of their behaviour have to be determined, include smooth surface, low bond strength, low modulus of elasticity

    玻璃鋼（ gfrp ）筋作為一種新型的防腐筋材，具有許多普通鋼筋所不能比擬的優點，如防腐性能好、抗拉強度高、絕電磁性、易於成型等，但也存在表面光滑、不易與混凝土的粘結、彈性模量較低等缺陷，因此解決玻璃鋼筋與混凝土的粘結強度問題是其技術關鍵。
  13. Have to out : 1 temperature constructional reinforcing not can place in heat area to mass concrete design. temperature constructional reinforcing of bottom of mass concrete need content that owing to temperature change produce bottom control stress smaller than anti - pull strength at the same. get minimum rate of reinforcing to content construct request

    得出： 1在大體積混凝土結構的溫度構造鋼筋配置中，構造鋼筋不宜放置於高溫區；大體積混凝土的底部溫度構造鋼筋應滿足溫度變化產生的底部約束拉應力小於混凝土同齡期的抗拉強度的要求，從而求出抗拉要求的最小配筋率。
  14. The failure mechanism of anchoring system was analysed, and the failure form and chitical length of anchoring steel bar were determined, factors influencing the properities of anchoring were discussed, and engineering application was carried cent

    鋼筋的臨界錨固長度受錨固材料抗拉強度、鋼筋的相對保護層厚度和鋼筋凈間距、鋼筋的直徑和外形等諸多因素的影響，有效錨固深度一般為10d 15d 。
  15. A new method of evaluation of measurement uncertainty for steel bar tensile strength based on connection number

    基於聯系數的鋼筋抗拉強度測量不確定度評定新方法
  16. Uncertainty analysis of tensile strength of reinforcement and its application

    鋼筋抗拉強度不確定度分析及其應用
  17. The cleavage strength test has been carried out to investigate the effect of pour direction for the strength of specimen without mechanical joint element ; the effect of mechanical joint element for the cleavage strength ; the effect of different materials which were used to embedding bars for the cleavage strength

    對比了老混凝土表面處理相同的情況下，不同澆築方位對無機械連接件試件劈拉強度的影響；機械連接件對劈拉強度的影響；不同植筋材料對劈拉強度的影響。
  18. As a new structural engineering material, continuous carbon fiber sheet ( cfs ) has many advantages of excellent mechanical properties, such as high intension, convenience in use, low weight, non - dimensional increase, and immunity to corrosion, etc. in recent years, it has been put into use in the strengthening of reinforced concrete

    碳纖維布（ cfs ）作為一種具有良好力學性能的新材料，它具有抗拉強度高、重量輕、抗腐蝕、抗疲勞等優點，在鋼筋混凝土結構加固領域的應用越來越廣泛。近十幾年來，人們對用cfs進行鋼筋混凝土結構加固進行了大量研究，集中於利用cfs加固梁、柱、板等結構，證明了其具有很高的推廣價值和巨大的社會經濟效益。
  19. Die throat radial stress was analyzed during every phase of drawing when the round draw bead be used, the formula of even stress intension in every region are deduced, this work establish the theory base of software programming about drawing the curved surface part

    摘要以半圓筋為例，分析得到了使用拉深筋拉深曲面零件時，拉深各階段凹模入口的徑向應力公式，並且對拉深各位置段的平均應力強度進行了求解，為開發曲面零件拉深應用軟體奠定了理論基礎。
  20. 2. based on the test results published over the word of steel fiber reinforced concrete beams without web reinforcements and with stirrups, the effects of steel fiber to shear resistance and the relationship of steel fiber to stirrups are analyzed, the improvements of steel fiber to failure states of reinforced concrete beams without web reinforcements are discussed. it is proposed that the formula of shear resistance of steel fiber reinforced concrete beams based on the model of the current design and construction spectification of steel fiber reinforced concrete structures ( cecs38 : 92 ), used of the uniaxial tensile strength of steel fiber reinforced concrete, and combined with different formulas specified in current design codes of concrete structures issued by different trades

    根據收集到的國內外對鋼筋鋼纖維混凝土無腹筋梁和鋼筋鋼纖維混凝土有腹筋梁的斜截面受力性能試驗研究成果，對鋼纖維在增強鋼筋混凝土無腹筋梁和有腹筋梁斜截面承載力方面的作用及其在箍筋抗剪承載力的關系進行了總結分析，對鋼纖維改善鋼筋混凝土梁破壞形態方面的作用進行了分析討論，提出了採用鋼纖維混凝土軸心抗拉強度指標，基於現行cecs38 ： 92 《鋼纖維混凝土結構設計與施工規程》計算模式、能夠與目前國內各行業現行混凝土結構設計規范中不同的鋼筋混凝土梁受剪承載力設計方法配套使用的鋼筋鋼纖維混凝土梁受剪承載力設計方法。
分享友人
分享到 Line

分享到臉書