接枝劑 的英文怎麼說

中文拼音 [jiēzhījì]
接枝劑 英文
grafting agent
  • 接 : Ⅰ動詞1 （靠近;接觸） come into contact with; come close to 2 （連接; 使連接） connect; join; put ...
  • 枝 : Ⅰ名詞1. （枝子） branch; twig 2. （姓氏） a surname Ⅱ量詞1. （用於帶枝子的花朵） 2. （用於桿狀物）
  • 劑 : Ⅰ名詞1 （藥劑; 制劑） a pharmaceutical or other chemical preparation 2 （某些有化學作用的物品） a...
  1. Study on ternary graft modification chloroprene rubber adhesive

    三元接枝改性氯丁橡膠膠粘劑的研究
  2. Preparation of adhesive of three - units graft copolymerization of cr mma sbs

    三元接枝共聚膠粘劑的研製
  3. The research progress in graft copolymers starch, ionized modified starch such as etherified starch and xanthate modified starch, and theirs application in water treatment were introduced

    針對接枝類改性澱粉絮凝劑、離子化改性澱粉絮凝劑如澱粉醚類化合物以及澱粉黃原酸脂類等天然改性澱粉絮凝劑的研究進展及在水處理中的應用進行了綜述。
  4. As to the high - density polyethylene, two strategies were performed : ( 1 ) after being modified by grafting polar groups on its backbone, polyethylene and organic montmorillonite were melt mixed directly, which could obtain the polyethylene / montmorillonite nanocomposites. the effect of groups grafted on the backbone on the efficiency of intercalation was investigated in this paper ; ( 2 ) choosing the grafters obtained in this experiment as the compatilizers, polyethylene / montmorillonite nanocomposites had also been prepared by melt mixing the polyethylene, grafter and organic montmorillonite. the difference of grafters and sequence of mixing on the intercalation result had also been analyzed

    對于高密度聚乙烯，採用以下兩種思路進行： （ 1 ）對聚乙烯首先進行功能化改性，使聚乙烯分子鏈上接枝上不同的極性基團，將改性后的聚乙烯再同有機蒙脫土直接熔融復合，成功的制備了聚乙烯蒙脫土納米復合材料，並考察了接枝到聚乙烯主鏈上基團的不同對最終插層效果的影響； （ 2 ）選用制得的接枝物作為相容劑，將聚乙烯，接枝物，有機蒙脫土三者熔融復合，也可以得到聚乙烯蒙脫土納米復合材料，並對選用不同的接枝物作為相容劑以及復合順序對最終插層效果的影響加以分析。
  5. The result showed that ( 1 ) organic modifier can reduce the polarity of na - bentonite, and compatilizer ( maleic anhydride grafted polyethylene ) can strengthen the polarity of polyethylene and the interface compatibility between polyethylene and bentonite. when the number of methylene groups in alkylamine was larger than 16, the intercalation nanocomposites were obtained

    研究結果表明， （ 1 ）有機改性劑能夠降低鈉基膨潤土的極性，相容劑（馬來酸酐接枝聚乙烯）對增強聚乙烯的極性，增強聚乙烯和膨潤土的界面相容性有很大作用。
  6. In attempt to prepare and investigate the novel high - performance electrically conductive polymer composites, the binary and multicomponent electrically conductive nanocomposites as well as the combined nano and in - situ composites were prepared with polypropylene ( pp ) served as the matrix, expanded graphite ( eg ) as a conductive filler, nylon 66 ( pa66 ) as a modifier, and maleic anhydride grafted polypropylene as an eg intercalater and the compatibilizer of pp - pa66, based on the state - of - art development in the realm of polymer / inorganic nanocomposites and polymer / polymer in - situ composites domestically and overseas. the main outcomes are obtained as follows : 1

    本論文以制備和研究新型高性能聚合物導電復合材料為目的，跟蹤和借鑒國內外在聚合物無機物納米復合、聚合物聚合物原位復合領域的最新研究成果，制備和研究了以聚丙烯（ pp ）為基體、膨脹石墨（ eg ）為導電填料、尼龍66 （ pa66 ）為改性劑、馬來酸酐接枝聚丙烯（ gpp ）為eg插層劑和pp ? pa66增容劑的二元及多元導電納米復合材料和納米復合與原位復合組合復合材料，取得了以下主要研究成果： 1
  7. This research regarded pp grafted mah as compatibilizer, took the method of masterbatch and use new technologies prepare into high relatively content masterbatch of ommt, finally, this kind of masterbatch and pp were mixing and melting together and pp / mmt nanocomposites were prepared through pairs of spiral pole, ( series pp - b ), meantime, pp / mmt nanocomposites without compatibilizer were compared to study ( series pp - a )

    本研究以pp接枝馬來酸酐為相容劑，採取母粒法，運用新型工藝制備出蒙脫土含量較高的接枝母粒，然後將這種母粒與pp通過雙螺桿共混熔融擠出制備出pp蒙脫土納米復合材料（ pp - b系列） ，同時比較研究了不加相容劑的pp蒙脫土納米復合材料（ pp - a系列） 。
  8. Using water - soluble carbodiimide as condensation agent, biomacromolecules such as gelatin, collagen and chitosan were covalently grafted on the plla - g - pmaa membranes. solution of the biomacromolecules was further coated on the above membranes to increase the surface density of the biomacromolecules. this technology was designated " grafting and coating " method

    為了將生物大分子化學接枝于plla膜表面，首先在plla膜表面接枝pmaa ，將羧基引入plla表面，利用水溶性碳化二亞胺edac作為縮合劑，與含有氨基的生物大分子反應，可將生物大分子如明膠、膠原和殼聚糖化學接枝在plla膜表面。
  9. The synthesis of modified polyolefin which grafted polar groups ， effects on interfacial adhesion of glassfiber reinforced polyolefin composite systerm and applications in glass fiber sizing were introduced in this paper

    本文介紹了接枝極性基團的改性聚烯烴的合成及其對玻璃纖維增強聚烯烴復合體系界面結合的影響以及在玻璃纖維浸潤劑配方中的應用。
  10. Effect of initiation on the graft of lignosulfonate with acrylic acid

    引發劑對木質素磺酸鹽接枝丙烯酸的影響
  11. Abstract : unsaturated polyester with low shrinkage composied of anti - shrinking agent, thermoplastics, dispersion - stabilizer, a kind of graft copolymer made from styrene and saturated polyester, shaped like a comb for its molecular structure and upr in certain structure and some factors effecting on low shrinkage were introduced in this paper

    文摘:研究了當用熱塑性樹脂作為不飽和聚酯樹脂低收縮劑時，合成了以苯乙烯為主鏈，聚酯為枝鏈的梳狀接枝共聚物，作低收縮劑的分散穩定劑，配合相應組成的不飽和聚酯樹脂得到了具有低收縮特性的不飽和聚酯組成物。
  12. Through the research on the crystallite of the composites modified with silicone coupling agent and pp - g - mah, research showed that the size of the crystallite and oriented crystallization had obviously influence on the mechanical performances. the sem results showed that nano - sio2 was dispersed well in pp, which promoted the matrix undergo shear yielding rather than brittle fracture

    通過對硅烷偶聯劑?馬來酸酐接枝聚丙烯共聚物作為界面改性劑改性pp微晶的研究，表明微晶尺寸變化與復合材料的力學性能有關；在界面附近形成擇優取向的結晶層，促使基體發生屈服變形，提高了復合材料的韌性。
  13. In the paper, we use coupler kh570 to modify nanoparticles, bond coupler onto nanoparticles, and obtain alkylated nanoparticles ; then with the help of coupler on the surface of alkylated nanoparticles, we graft pmma onto nanoparticles through in - situ polymerization of mma monomer, and gain composited nanoparticles encapsulated by polymer, thereby nanoparticles are encapsulation modified

    本論文採用偶聯劑kh570對納米粒子進行改性，使之鍵接于納米粒子表面后，獲得烷基化納米粒子；然後在烷基化納米粒子表面通過單體mma的原位聚合，接枝聚合物pmma ，實現聚合物包覆納米粒子獲得復合納米粒子，以達到納米粒子的聚合物包覆改性。
  14. This article confirmed the grafting efficiency of starch grafted to acrylic acid and the structure of starch and its grafted matter through the separation, purification and analysis tests to the grafted copolymer and the grafted forked - chain matter produced from the process of this reaction ; and deduced the formula of the velocity of such reaction mentioned above with a calculated result of the apparent activation energy in this reaction by the curve showing the relationship among the consistency of starch, monomer and initiator and the velocity of the grafting copolymerization

    摘要對澱粉接枝丙烯酸所得接枝共聚物及接枝側鏈物進行分離提純和分析測試，確定了其接枝效率並表徵了澱粉及其接枝物的形態結構；通過分別測定接枝共聚反應速率與澱粉、單體、引發劑濃度的關系曲線，確定了該接枝共聚反應的速率關系式；推算出了反應的表觀活化能。
  15. Secondly, the grafted membranes were prepared by grafting 2 - acrylamido - 2 - methyl propane sulfonic acid ( amps ) on pretreated membranes using cetric ammonium nitrate ( can ) as an initiator in the aqueous medium. the surface compositions of the grafted membranes were determined by fourier transform adsorption spectrum ( ftir ) and x - ray photoelectron spectroscopy ( xps ). and the morphology of the grafted membranes was studied by scanning electron microscopy ( sem ) and atomic force microscopy ( afm )

    然後，選用硝酸鈰銨作為引發劑， 2 -丙烯酰胺- 2 -甲基丙磺酸（ amps ）為接枝單體，在水溶液體系中進行接枝共聚反應制備pvdf ? g ? amps中空纖維膜，並利用傅立葉紅外光譜（ ftir ） 、 x光電子能譜（ xps ） 、掃描電子顯微鏡（ sem ）及原子力顯微鏡（ afm ）等檢測手段證實了接枝共聚物的存在。
  16. ( 1 ) in chapter 5, palladiumphthalocyanine and palladium 4, 4 ', 4 ", 4 ' " - tetranitrophthalo - cyanine were synthesized according to condensation method with high yield and high product purity. the structures of products were characterized by element analysis and ir spectra

    為此，分別考察了不同引發劑及用量對pvp甲殼糖接枝共聚物的反應性能、接枝分子量、接枝效率以及產物的基本性狀等的影響。
  17. In this paper, the nanometer - sized silica was organically grafted with tdi and ethylene glycol monobutyl ether, or by treated with silicohydride coupling agent ( k. h - 560 )

    本文分別用tdi與乙二醇單丁醚接枝法和硅烷偶聯劑kh - 560對納米sio _ 2進行有機化處理。
  18. In this thesis two kinds of coupling agents and maleic anhydride ( mah ) grafted polypropylene ( pp - g - mah ) were employed to act as interface compatibilizers for pp / nano - sio2. master batches from pp ( 90 ), nano - sio2 ( 10 ) and coupling agent ( 1 ) were prepared by twin - screw extruder firstly

    本課題選用硅烷偶聯劑、鈦酸酯偶聯劑以及自製的馬來酸酐接枝聚丙烯作為pp sio _ 2復合體系的界面增容劑，採用母粒法擠出工藝制備了改性pp 。
  19. The content of styrene was found to be dependent on the investigated grafting conditions, of which the dose rate and monomer concentration were the major conditions, and the dependence of the initial rate of grafting on the dose rate and the monomer concentration was found to be of 0. 4286 and 1. 1662 orders, respectively. the results indicate that the grafting reaction is competitive and the copolymerization and the graft - copolymerization are existing at the same time. the grafting proceeds by the so - called front mechanism in which the grafting starts at the surface of the films and moves toward the middle of the film by successive diffusion of the styrene through the grafted layers

    我們對輻射接枝反應中的各個因素如：單體濃度、輻射劑量率、輻射劑量以及反應時間進行了研究分析，結果表明：單體濃度和劑量率是反應的兩個主要影響因素，它們對反應速率的影響指數分別為1 . 1662和0 . 4269 ；反應的動力學方程為： rg k [ d ] ~ （ 0 . 4269 ） [ m ] ~ （ 1 . 1662 ） ；認為接枝反應是一競爭反應，單體的均聚反應和在聚合物上的接枝反應同時存在，單體濃度的高低決定著競爭反應的方向；輻射接枝反應是從聚合物表面開始的，隨著溶劑的溶脹和單體的擴散最後在整個膜體中形成接枝產物。
  20. Solubility of product was tested in 12 usual solutions and it shown all graft copolymers were water - soluble, the excellent film - forming performance made it more extensive applications in practice

    考察了不同接枝率的產物在12種常見溶劑中的溶解性，結果表明，不同接枝率的接枝共聚物都有良好的水溶性，可以形成無色透明的膜，擴大了其實際應用價值。
分享友人
分享到 Line

分享到臉書