擬合製作 的英文怎麼說

中文拼音 [nǐgězhìzuò]
擬合製作 英文
make fit
  • 擬 : 動詞1. （設計; 起草） draw up; draft 2. （打算; 想要） intend; plan 3. （模仿） imitate
  • 合 : 合量詞（容量單位） ge, a unit of dry measure for grain （=1 decilitre）
  1. Virtual studio system, which is a hotspot research area in video frequency production field nowadays, its mostly research content is : shoot the histrionic " s perform in blue box, then by using chroma key, synthesize it with virtual scene produced by computer

    虛擬演播室系統，是當前視頻製作領域的一個研究發展的熱點，其主要研究內容是：在藍箱中拍攝演員的表演，然後通過色鍵將之與計算機製作的虛擬場景合成。
  2. Second, the imaging model built here has taken into account the tilt modulation, the hydrodynamic modulation, and current modulations of radar cross section. consequently, it has realized the imaging simulation of four kinds of wakes with the same imaging model. third, the orbital velocity of ocean wave was considered as the basic dynamic factor, and the imaging model calculates the influence on raw data by the wave m ovement according to the orbital velocity

    該模型的主要特點是： （ 1 ）它採用了三尺度復合表面模型的思想來計算海面的電磁散射，考慮了中等尺度波對紋波的進一步調製作用，彌補了傳統雙尺度模型的不足； （ 1 ）它考慮了海浪的傾斜調製作用、流體動力調製作用和流場對雷達截面的調製作用，實現了用統一的模擬模型對四種艦船尾跡特徵進行成像模擬； （ 3 ）它把海面長波的軌道速度作為基本的動態成分，並依此來考慮海面運動對sar回波信號的影響。
  3. Finally, the three dimensional configurations are imported to 3dmax software. making great use of powerful entity rendering and animating ability in 3dmax software realizes gear - spline mesh, gear - gear mesh and cam - block moving dynamic simulation

    最後，將三維實體傳遞到3dmax中，利用3dmax強大的實體渲染和動畫製作功能，實現了齒輪齒條嚙合、齒輪嚙合和凸輪滑塊運動的動態模擬。
  4. Virtual studio system, a novel technology of tv program making, combines the conventional chroma key system concept with the advanced camera tracking and graphic forming technology

    虛擬演播室系統，是一項新穎的電視節目製作方式，它結合了色鍵技術、攝像機跟蹤技術以及先進的圖形生成技術。
  5. The sort, material composite, structure properties and conduction mechanisms of eca ( electrical conductive adhesive ) were discussed in this paper. then three types of ega specimens were designed and made, on which temperature cycles test from - 55 ? to + 125 ? and thermal aging at + 125 ? were carried out. changes of the adhesive strength, eca ' s bulk resistance and contact resistance under the environment stress were summarized and a detailed evaluation on these specimens was given

    本文在全面闡述導電膠的分類組成、物理結構、導電機理的基礎上，設計並製作了三批導電膠樣品，通過對樣品進行長時間的- 55 ? ? + 125溫度循環和125高溫存儲試驗，總結了導電膠粘接強度、體電阻和接觸電阻在環境應力下的變化規律，對三類樣品的長期可靠性做出了全面的評價，並結合導電膠電阻率和「穿流閾值」的計算機模擬，給出了提高導電膠可靠性和電導率的建議，介紹了國內外在高電導率高可靠性導電膠研製方面的一些最新進展。
  6. The feasibility that kaufman ion source is applied in reactive ion beam etching is discussed. etching characteristics of materials, including pr, cr, quartz, are investigated. the etch rate and mechanisms of such materials are measured and analyzed as a function of ion energy, ion beam density and ion incidence angle in pure ar and chf3, respectively. the etch rate has shown a square root dependence on variation versus

    深入研究了光刻膠、鉻薄膜、石英等光學材料離子束刻蝕特性，分別以ar氣和chf3為工作氣體，研究光刻膠、鉻薄膜、石英等的刻蝕速率隨離子能量，束流密度和離子入射角度的變化關系，得到刻蝕速率與影響因素的擬合方程，為掩模的製作工藝路線提供了實驗依據和理論指導。
  7. The difference that my system differs from autolisp and ads which takes the design method facing to the process is to adopt the objectarx which designs procedure by facing to the object, and to study and exploit the software system of cad which is much more suitable for kitchen furniture, and the software system possesses some innovation and practicability ; at the same time, with the advanced developing language visual c + + 6. 0, and with the utilization of the openness of autocad 2000, the software is developed by the second exploitation ; and my system adopts the standard applied software style and the friendly designed dialogue interface about windows, this makes the users " operation easier ; finally the furniture that is designed is endowed with materials and rendering, and then put into the virtual environment for proceeding the animated show

    系統不同於以往autolisp和ads都是面向過程的設計方法，而是採用了objectarx面向對象程序設計的方法，研究利開發出了更適合廚房傢具的cad軟體系統，具有一定的實用性和創新性；同時，結合先進的開發工具包軟體visualc + + 6 . 0 ，利用autocad2000對系統的開放性對其進行二次開發：採用標準的windows應用軟體風格、友好的對話框設計界面，使用戶的操作簡單容易；最後將設計好的傢具在3dviz軟體中進行材質的選擇和渲染，然後放置於利用3dviz製作的虛擬環境中進行動畫展示。
  8. ( 3 ) the author applied wavelet analysis in the data processing of airborne radioactive survey, and analyzed the effect of wavelet used in spectrum data processing, line data processing and region data processing. the author had proved that the wavelet used in spectrum data processing can gain more true and more ideal information than traditional data processing method, and can accurately identify information which is beyond main energy windows by practice data. the author considered it is effective to extract abnormal information when the wavelet used in line data processing, and it is effective to eliminate the belt of airborne radioactive survey data when the wavelet used in region data processing

    有效的融合了遙感航測信息，提高了工作效率； （ 2 ）根據光學有關物理性質，製作的模擬反射率圖，囊括了tm數據七個波段的信息，使得圖像質量、地物解析度得到了提高； （ 3 ）在航放數據處理過程中引入了小波分析，系統分析了小波在處理單點數據、測線數據、測區數據的應用效果；用試驗數據證明了小波處理單點數據可得到較傳統數據處理方法更為真實、理想的譜數據，能準確的識別主能量窗以外的信息；認為處理線數據，可以提取埋藏於噪音中的異常信息；處理測區數據，對消除航放數據的條帶有一定的效果。
  9. Based on the spectral irradiance measured with the sun - atmosphere ultraviolet spectrum radiometer ( sauvs ) developed by the institute of atmosphere physics and the changchun institute of optics and fine mechanics, chinese academy of sciences, measuring the direct and scatter irradiance spectrum of ultraviolet waveband which arrives in beijing global surface, giving a method of retrieving the aerosol optical depth ( aod ) and put up with primary results that exponential function can fit the retrieval results according to its visibility, putting forth different coefficients and functions on variable visibility, also giving a primary analysis on the aod in dust - storm day and some contrast between sun - day and dust - storm day, analyzing the ratio between scatter and total irradiance, and its relationship with atmosphere mass and total atmosphere optical depth, lastly contrasting with the survey results by aeronet beijing station, the results of retrieval is in reason, this work gives some help in researching the co - effect of aerosol - radiance - climate and makes preparation for further survey on the radiance characteristics of dust

    利用中國科學院大氣物理研究所與長春光學精密機械研究所合作研製的太陽?大氣紫外光譜輻射計（ sauvs ） ，測量到達北京地表的太陽直接和散射紫外光譜輻射，導出了大氣氣溶膠的光學厚度。初步結果表明：北京紫外波段大氣氣溶膠的光學厚度在絕大部分情況下隨波長的增加而單調減小，用指數函數可以較好地擬合反演結果，統計得到了三個水平能見度狀況下擬合函數的系數值和公式表達式；初步分析了揚沙、浮塵、沙塵暴天氣條件下氣溶膠光學厚度的特點，並與一般晴朗天氣條件下的氣溶膠光學厚度特點做了比較分析；分析了太陽紫外譜輻射中散射輻射與大氣質量、大氣總光學厚度的定性關系和定量表達式；最後與全球氣溶膠監測網路（ aeronet ）北京站的資料做比對，表明反演結果基本合理。
  10. The production team had already shot on location ; creating a battle scene involving thousands of soldiers and horses from the chinese military and cavalry posing as the mighty army of the qin dynasty, battling in the yellow river forest of rocks in faraway jinsu province and the jinxi plains of beijing

    電腦特技顧問在拍攝前期已開始參與研究電腦模型製作的程序，分析在質感及燈光效果上的相互配合動畫師則按照導演所拍攝的燈光效果套用於模擬之無重力實驗室，令場景的環境真假難分。
  11. Firstly, introduce the basic conception of the telemeter and the telecontrol system ; discuss the common department of the telemeter and the telecontrol system, and the angle modulation used by it ; summarize the structure and function of the telemeter and telecontrol

    首先，對遙測遙控系統的基本概念作了介紹；在此基礎上，對遙測遙控系統共有部分? ?信息傳輸部分進行了討論；對研發遙測模擬組合系統的中頻調制器所用到的角度調製作了介紹，它也是無線遙測遙控系統信息傳輸的一個重要組成部分；對遙測遙控系統的組成及其功用作了一定的概述。
  12. Developing the model which complies with the wheel trace coincidence of a steering full - trailer ; performing simulating tests and errors analysis

    設計製作了符合輪跡重合轉向全掛車的模型，並進行了模擬試驗及誤差分析。
  13. There are several aspects of work that was done in this thesis mainly. firstly, the theory of the under - water long - range remote control system was analyzed and the remote control instruction code was designed. secondly, decoding circuit of the under - water long - range remote control system was designed with fpga, including vhdl coding, simulation, synthesis, place & route, etc. besides, power consumption to fpga that is designed is estimated in this thesis. lastly, we designed and made one pcb to verify and test fpga decoding chip that is designed, and debugged and tested it finally

    首先，深入研究和分析了在頻域實現水下遠程遙控解碼的原理並進行了遙控指令編碼設計；其次，用altera公司的cyclone系列fpga晶元完成了水下遠程遙控fpga解碼晶元的設計工作，包括硬體描述語言（ vhdl ）編碼、電路前後模擬、綜合和布局布線工作，並對設計的fpga解碼晶元進行了初步的功耗估算；最後設計製作了一塊fpga解碼晶元電路驗證測試板，並完成了電路調試和測試。
  14. The sample with low emitter efficiency has completed as the method of above. this lead to the greatly decrease of the reverse recovery time and the low reverse leakage and forward voltage, especially the excellent temperature character of the leakage. the test date shows that the samples reach the first class of international level

    本論文作者通過模擬測試，驗證了課題研究的理論設想，並設計製作了具有低陽極發射效率結構的高壓功率frd ，利用局域鉑摻雜和電子輻照相結合的壽命控制方式，實現器件反向恢復時間的極大減小，並且反向漏電流、軟度因子、正向壓降等關鍵參數也較理想，且具有極佳的漏電溫度特性，達到器件綜合性能的優良折衷，達到國際先進水平。
  15. B ) equivalent circuit method and finite element analysis ( fea ) to compute the static force are presented, the results obtained by each method are compared one with the other. c ) the results of dynamic simulation by means of the software, ansoft show the hlfm " s characteristics when the motor works in the special frequency and single stroke and the conditions used for position control. d ) the measured static thrust - displacement characteristics and the dynamic characteristics during starting show good correlation with the calculated results

    在設計並製作了實驗樣機的基礎上所做的研究內容包括； （ 1 ）分別用能量法和麥克斯韋張量法推導電磁力的計算公式，並討論他們的不同應用范圍； （ 2 ）分別用等效磁路法和有限元法作直線力電機的靜特性分析，並比較分析它們的計算結果； （ 3 ）用有限元模擬軟體做直線力電機動態特性的模擬，分別分析直線力電機的頻率特性、動子開合閘特性和開環位置控制的工作特性； （ 4 ）做直線力電機的靜推力?位移特性實驗和動子開合閘的動態實驗，並將實驗結果與計算結果進行對比，實驗驗證了計算模型及計算方法的正確性。
  16. Therefore, the waveguide optical modes in the semiconductor lasers with different waveguide structures are investigated by means of optical waveguide theory. with the development of fabrication and packaging techniques, the dimensions of optoelectronic and photonic systems have become smaller and smaller. the far - field radiation models are no longer suitable for the near - field distribution of semiconductor lasers

    隨著製作工藝和封裝技術的發展，光電系統和光子系統的尺寸越來越小，半導體激光輻射的遠場模型不再適合其近場特性的分析；而且，半導體激光器可以作為近場虛擬光探針，應用於近場光學高密度存儲、納米光刻、近場光學成像以及光譜探測等領域。
  17. Further more, basedon the principles and methods of humanized interface design the thesispresented, the author has designed and developed the web - based course ofmachinery experiment, and has estimated the course three times with themethod of evaluation. web - based courses, researches the estimate method ofhumanized web - based courses. further more, basing on the theories this paperpresented, the author designs and develops the machinery experimentweb - basedcourseandestimatesthecoursethree timeswithdifferentmethods. at last, the thesis points out the prospect of humanized interface design ofweb - basedcourse

    本研究在理論研究基礎上，完成了《機械基礎實驗》網路課程的界面設計與製作，該界面以模擬真實實驗場景的三維虛擬界面為交互平臺，以網路課程學習者與指導教師的心理需求為設計的出發點，力圖在操作交互上符合用戶的操作習慣、信息獲取習慣，並符合用戶的審美要求，做到界面的人性化。
  18. In this paper, according to the equation of voltage vector of single - phase motor operating at symmetrical condition, author presents a new voltage - vector pwm method of variable frequency control for single - phase motor. in system, the voltage vector is used as a control parameter

    本文根據單相電動機對稱運行時的合成電壓矢量方程，提出了以合成電壓矢量為控制量的單相電動機電壓矢量式pwm變頻調速控制方法，並進行了計算機模擬及製作了單相變頻器。
  19. The third chapter proposed three ways in making three - dimensional animation based on collecting all databases, which are the key of developing cai software. the author built the animations of belt drive and chain drive independently using 3ds max and solidworks. at the same time, a general machine and moving of balls were animated by some program languages

    用3dsmax與solidworks結合製作了機械設計課程中的帶傳動、鏈傳動的三維動畫；用編程語言開發了機械原理課程中的鉸鏈四桿機構的動畫模擬；闡述了編程語言與應用軟體結合開發動畫的原理，且用vb與autocad結合開發球體沿正弦曲線運動的動畫的例子來說明二者結合的一般方法。
  20. In the dissertation, a micromechanical comb capacitive accelerometer having u - shaped supporting beams is designed, simulated and fabricated on the base of the anodic bonding between the silicon and glass, and bulk silicon micromachining process

    而改用體硅微機械製作可以改善這些問題。本文設計、模擬並製作了一種基於硅一玻璃鍵合工藝的u型梁支撐的微機械電容式加速度計。
分享友人
分享到 Line

分享到臉書