有形輸出 的英文怎麼說

中文拼音 [yǒuxíngshūchū]
有形輸出 英文
visible export
  • 有 : 有副詞[書面語] （表示整數之外再加零數）: 30 有 5 thirty-five; 10 有 5年 fifteen years
  • 輸 : Ⅰ動詞1 （運輸; 運送） transport; convey 2 [書面語] （捐獻） contribute money; donate 3 （失敗） l...
  • 有形 : tangible; visible有形財產 tangible property; 有形動產 tangible personal property; 有形貨物 tangib...
  • 輸出 : 1 （從內部送到外部） export 2 [電學] output; outcome; outlet; out fan; fanout; 輸出變壓器 output ...
  1. Piezoelectric - stack can give more output displacement and pressure and have more rate of conversion and more stability than bimorph type. it has been used to all kinds of driving places. design of displacement amplification we design displacement amplification because of the little displacement output of the piezo - stack. this paper analyses the disadvantage and advantage of all sorts of amplification, and proposes a new type of displacement amplification based on

    鑒于壓電疊堆輸出位移小的特點，引入柔性鉸鏈位移放大機構，分析了各種放大機構的優缺點並結合實際問題，設計出基於三角形放大原理的橢圓形放大機構，利用有限元分析軟體ansys對放大機構的主要結構參數進行了分析，得出影響放大機構放大倍數的規律。
  2. Fluid noise mainly comes from out put pulsation of rate of flow, the main reason of out put pulsation of rate of flow is the instant high pressure return flow that obturation cubage produced when the big round curve pressure transition. the v trough on the port plate can reduce the fluid noise. in this paper, the author based on the acting of dam a river and condensability of liquid and used matlab language as tool to calculate the v trough on the original port plate and drew out the p - t diagrammatic curve and analyzed its shortcoming and improved the design of original v trough and got that the best size of its angle was 12. 3 and its length was 5mm and the cross section was an equilateral triangle

    流體噪聲主要來源於輸出流量脈動，造成輸出流量脈動的主要原因是閉死容積在大圓弧段壓力切換時產生的瞬時高壓迴流，在配流盤上開設v型尖槽可降低因高壓迴流而引起的流體噪聲，本文以截流作用和液體的可壓縮性為理論依據，以matlab語言為工具，對原配流盤上的v型尖槽進行了理論計算，繪制出p - t圖線，分析了它的不足，並對原有v型尖槽進行了優化設計，得出了v型尖槽的最佳幾何尺寸：配流盤平面上的v型尖槽的兩邊的夾角為12 . 3 ，槽長5mm ，槽的橫截面為等邊三角形。
  3. Just below threshold, consistel1t to theoretical analysis, there are numbers of comb - like narrow linewidth lights due to resonating of ifltr8 - cavity ase light. novel experimental results of the erbium - doped - fiber ring resonator behaviors operating near threshold are reported in the chapter

    首先理論分析了當有源環形腔無注入光，且有源光纖環形腔在閾值以下時，由有源腔內ase輸出光表現出的腔輸出特性。
  4. Carries created by ultra - fast laser pulse accelerate in the field of the photoconductor and form a transient photocurrent. the shape of the photocurrent lies on the movement of the carriers, as well as the movement of the carrier ' s lies on the field in the photoconductor

    光電導體中的載流子在光電導體內的運動情況決定了所輸出電脈沖的波形，而載流子的運動是在光電導體內部電場的作用下進行的，所以光電導體內的電場對光電導開關的性能有顯著的影響。
  5. A real rough set space and the concepts of real lower and upper approximation corresponding to real - valued attributes is studied. a rhombus neighborhood for som is proposed, and the combination of som and rough sets theory is explored in the dissertation. according to the distance between the weight of winner node and the input vector in the real rough sets space, some new weights learning rules are defined

    本文提出採用菱形鄰域代替一般的方形鄰域，可以減少待修正權重的數目;並利用實數粗糙空間的下、上近似集的精確概念劃分自組織映射的輸出結果，使得改進后的映射結果中各類樣本點之間有明顯的間隔，易於進行分類識別。
  6. A conventional edg design is based on the rowland circle on which the end points of the input and output waveguides located

    原有edg採用rowland圓設計，輸入輸出在圓弧曲線上由條形波導引出。
  7. In tins paper, a new type of standing - wave linear usm with square - ring vibrator was presented, which had two contact surfaces and a support structure with four flexure hinges for the power output

    摘要利用有限元分析軟體對方環形直線駐波超聲波電動機的振子進行了動態設計，提出了一種環梁式雙接觸面的振子結構，該振子採用柔性鉸鏈與支撐結構連接，實現力的輸出。
  8. We also propose a new subsidiary method for finesse measurement based on selfhomodyne by x m. using of resonating of the intra - cavity amplified spontaneous emission ( ase ) light, without extemal light source

    同時提出利用腔內ase輸出光的線寬來測量有源光纖環形腔濾波器的精細度，而不需要注入光。
  9. ( 2 ) ln the third chapter of this dissertation, the behaviors of intra - cavity amplified spontaneous emission ( ase ) light in the active fiber resonators are firstly studied by both theoretical and experiment8l ways, when it is operating near the threshold

    二、在本文第三章中，研究無注入光時，通過分析腔內ase光輸出特性來研究有源光纖環形腔在近閾值點附近的濾波特性。
  10. Measurement points include : over floor corresponding to the center of bogie truck, air return port, air feeding port, over coupler and draft gear, head acoustics measurement and analysis system is used in signal capture and data process

    採用headacoustics測量分析系統進行了噪聲測量，並利用該軟體對採集到的數據進行回放，截取有效數據進行數據處理，處理的結果，以圖表的形式輸出。
  11. However, due to the elastic deflection and vibration of the links, the flexible manipulator becomes an infinite dimension mimo system with distributed parameters, and is highly nonlinear and strong coupling. therefore, the model and the control of flexible manipulator are of great significance both in theory and in application

    然而也正是由於連桿存在彈性變形和振動，使得柔性機械手成為一個高度非線性的、分佈參數的、強耦合的無窮維多輸入多輸出系統， ，因此其建模和控制也具有重要的理論意義和應用前景。
  12. The main contribution of this paper is that it offers the software to analyze the detection performance and the combat efficiency of radar system taking advantage of visual c + + 6. 0. the software has very well graphics visualize output interfaces. the software can be used to expediently compare the detection performance of radar in existence, calculate and compare the max range and the detection precision of different radar under varying complex environment, calculate the radar detection probability and the radar false alarm probability. some new analyzing module can be added in this software easily

    論文的主要貢獻是利用visualc + +設計了「機載火控雷達性能分析與效能評估軟體」 ，該軟體具有良好的人機交互性和圖形化形象化的輸出界面，可以方便的分析對比現有國內外機載雷達系統的檢測性能，對比不同雷達系統在各種復雜環境下的最大發現距離，計算不同雷達系統在各種復雜環境下的測量精度，以及計算雷達的檢測概率和虛警概率等參數，並且可以方便地添加新的分析模塊，進一步增加軟體的功能。
  13. Each major type of analytical test or procedure should have a php class by the same name that contains input functions, functions that compute intermediate and summary values, and output functions functions that dump the intermediate and summary values to the screen in textual or graphic form

    每種主要的分析測試或過程應當有一個名稱與測試或過程名相同的php類，這個類包含了輸入函數、計算中間值和匯總值的函數和輸出函數（將中間值和匯總值用文本或圖形格式全部顯示在屏幕上） 。
  14. This machine is used for straight - line bevel cutting and bevel grinding and polishing for flat glass, in certain condition, it can be also used in bevel cuttig, bevel grinding and polishing for soft stone panel. the contrilling system adopts plc, it can accomplish automatic grinding cutting after entering processing parameter, convery speed adopts speed adjustment of fre quency conversion, direct drive of wheel head motor, all motions for joining in parameter adjustment completely adopt straight - rolling guide - track with front beam and wheel head lifting lntegrally. the transmission of input and output adopts synchronization tooth belt and photo - electricity switch positioning, and position limitation of two pass is much more reliable

    Sxm371pa型玻璃直線斜邊磨邊機是用於玻璃直線斜邊斜切，斜磨及光拋的專用設備，在一定條件下也可以用於軟石板材的斜切斜磨及拋光。控制系統採用plc控制。輸入加工參數后可自動完成磨削傳送速度採用變頻調速，磨頭電機直接傳動，所有加工參數調整運動副全部採用直線滾動導軌，前梁與磨頭整體升降，輸入輸出傳送採用同步形帶，光電開光定位，雙行程限位更安全可靠。
  15. But all designed software before in our country still have some weakness, for example, the conventional type of cam counld be projected by these software is very little, and used approximation by lines to curves of cam which have bigger error and more nodal points that result in chattering of principal axis. in furthermore, this software of designing cam in fact only has the function of cad. if you want to simulate and work over the designed cam in that software, you will find that you have to export it to other cad / cam system software ( e

    隨著數控加工在我國的深入開展，真正實現我國的凸輪cad cam就顯得非常必要，但以往的凸輪設計軟體還存在許多不足，如可設計的凸輪類型較少，大多集中於平面凸輪；且採用誤差較大、節點數過密的直線逼近法生成凸輪工作曲線，造成計算時間長，且加工中產生較大振動；同時這些凸輪設計軟體基本上只具有cad功能，如果想將設計好的凸輪進行模擬和加工，就必須將圖形輸出到其它通用cad cam軟體（如mastercam等）中，因此這些軟體在實際應用中總不盡人意。
  16. This technology broke the tra - ditional microwave therapy machine sole sine wave output treatment function, the newly creation had the pulse wave and the sine wave two kind of profiles outputs treatment function, thus has established okw series microwave therapy machine in the domestic leading status, has filled the domestic blank

    自行研發生產的奧克微微波治療機，擁有自主知識產權，已獲國家頒發發明專利證書。該項技術打破了傳統微波治療機單一正弦波輸出的治療功能，新創具有脈沖波和正弦波兩種波形輸出的治療功能，從而奠定了
  17. Due to its active probe heads including a trigger output for protocol - synchronous recording at the oscilloscope reactionless measuring under operating conditions of your plant can be executed

    通過帶有觸發與協議同步的波形輸出到記錄儀的激活探頭，人們可以測量運行中的設備。用戶可以獲得用於
  18. Firstly, this paper briefly describes the pda " s bsp, and summarizes the xgw system, including program schedule, memory management characterfe graphic output, then concentrates on perfecting the xgw system for meeting with the pda specific application requirements, including soft _ keyboard input, handwriting input and gui graphic modules. at the same time, the pda " s software structure, the answers to problems and pda " s interrupt process are given in details

    文章首先介紹了本pda系統的bsp模塊，而後概述了xgw平臺系統，包括程序調度、內存管理和字元圖形輸出，重點闡述了針對本pda系統的具體應用需求，對xgw原有平臺的完善，主要是軟鍵盤輸入、手寫體輸入、 gui圖形控制項的開發；同時給出本pda系統的軟體結構以及難點問題的解決方法和系統中的中斷處理。
  19. Subsequently, two kinds of basal movable element models actuated by sma are studied, they are bidirectional bending beam element which can yield bending deflection, and linear actuating element with linear displacement output

    研究了兩類基本的sma驅動單元模型：具有彎曲變形輸出的雙向彎曲梁單元和具有直線性位移輸出的軸向伸縮單元。
  20. The analyzer has the abilities of long - term online operating, real - time measuring and analyzing, managing of history data, etc. compared with the traditional analyzer, it has many advantages, such as easy controlling, strong processing and graphics output, etc. it is able to record the abundant and integrated data for the electric department, and provide the reference for selecting correct compensation technology. in this paper, some key technologies are discussed and analyzed

    它實現了可長期在線運行，實時測量分析，歷史數據管理等功能；與傳統的儀器相比，具有操作簡單，處理能力強，圖形輸出等優點；可為電力的生產、運行和管理部門提供豐富、完整的實測記錄資料，也為電力技術工作者選用補償方式、裝置和技術提供了重要依據。
分享友人
分享到 Line

分享到臉書