析水速率 的英文怎麼說

中文拼音 [xīshuǐsùlǜ]
析水速率 英文
drainage rate
  • 析 : Ⅰ動詞1. （分開; 散開） divide; separate 2. （分析） analyse; dissect; resolve Ⅱ名詞（姓氏） a surname
  • 水 : 名詞1 （由兩個氫原子和一個氧原子結合而成的液體） water 2 （河流） river 3 （指江、河、湖、海、洋...
  • 速 : Ⅰ形容詞（迅速; 快） fast; rapid; quick; speedy Ⅱ名詞1 （速度） speed; velocity 2 （姓氏） a surna...
  • 率 : 率名詞（比值） rate; ratio; proportion
  • 速率 : speed; rate; tempo
  1. Through the special studies on impacts to atomizing and humidifying effect from such factors as the firing pin type, centrifugal structure, higher spraying pressure, less aperture, initial water temperature and original state of the air, some conclusions are obtained, such as : the centrifugal nozzle with firing pin type, high pressure and little aperture has bigger air eddy and atomizing angle. the spaying liquid has high velocity. the droplet is small, and the heat and mass transfer velocity is high

    通過對撞針型結構、離心式結構、較高的噴水壓力、較小的噴嘴孔徑、噴水初溫及待加濕空氣初狀態對霧化加濕效果的作用原理的重點分析，得到：撞針型高壓小孔徑離心式噴嘴具有較大的空氣渦與霧化角，噴出的液體流速高、液滴小、水與空氣傳熱傳質速率高，撞針型結構提高了霧化加濕效率，高壓小孔徑的特點為霧化加濕提供了較大的能量，而噴水初溫的升高會減小水的粘性力和表面張力，從而優化加濕效果。
  2. The electronic moisture analyzer and the constant temperature and humidity equipments were used to study the influences of humidity to alfalfa drying velocity

    摘要採用紅外水分分析儀和恆溫恆濕箱研究了濕度對紫花苜蓿乾燥速率的影響。
  3. The basin - formed mechanism, evolution model and petroliferous geological features of compresso - shear basins in the world are analyzed, by which six aspects of the features are summarized as follows : 1 ) in the compresso - shear process, the sedimentary speed of basin is high, forming thicker coarse - grained clastic rocks which normally shape good petroleum reservoir ; 2 ) the source rocks of basin tend to coming from the organic matter - enriched rocks formed in pre - compresso - shear stages, except that in intense compresso - shear process, deep water - semi deep water source rocks are possibly developed in pre - compresso - shear stages, e4xcept that in intense compresso - shear process, deep water - semi deep water source rocks are possibly developed in frontal of deep depression ( fore deep ) of thrust belt ; 3 ) the en echelon folds ( including anticline and fault - nose structure ) are generally as good oil traps ; 4 ) the compresso - shear process is helpful to hydrocarbon accumulation ; 5 ) it may promote the maturity and hydrocarbon - generating process of organic matte, and 6 ) the thrust belts in the surrounding areas of compresso - shear basin are favorable are favorable domains for petroleum concentration

    摘要通過對世界上壓扭性盆地的成盆機制、演化模式和油氣地質特點分析，總結壓扭性盆地具有6個方面的石油地質特徵：壓扭作用期間盆地的沉積速率較高，一般形成較厚的粗碎屑沉積，它們常構成很好的油氣儲集層：盆地的烴源巖往住來自於前壓扭期砂成的富含有機質的巖石，但在強烈的壓扭作用期間，在沖斷帶的前緣深坳陷（前淵）中有可能發育深水半深水相的烴源巖；壓扭（張扭）作用期間形成的雁行式褶皺（包括背斜和斷鼻等）往住是很好的油氣圈閉；壓扭作用易於成藏；壓扭作用可以促進有機質的成熟生烴作用；壓扭性盆地的周邊沖斷帶是油氣賦存的有利部位。
  4. The monitoring result proved that although the surface settlement velocity was rather great during the initial phase of enrockment, the foundation still maintained firm based on the integrated analysis of lateral displacement, lamination settlement and pore water pressure measurement

    監測結果表明：盡管拋石初期地表沉降速率很大，但綜合測斜、分層沉降、孔隙水壓力觀測結果分析，地基依然保持穩定。
  5. Under the different freezing - thawing cycle circumstance, three factors of water binder ratio, air content and mineral admixture are analyzed by using the method of orthogonal table. the test results show that the chief influencing factor is the water binder ratio in water freezing - thawing cycle circumstance, and in salt freezing - thawing cycle circumstance is the air content. this could illustrate that entraining air into concrete can improve the frost resistance of concrete effectively in salt freezing - thawing cycle

    分析了在純水和3 . 5 % nacl溶液中受凍后，水膠比、含氣量和摻合料對混凝土飽和系數及變化速率的影響規律，試驗結果表明水膠比對混凝土水凍時的飽和系數及變化速率影響顯著，而鹽凍情況下含氣量則是主要影響因素，說明引氣能顯著提高混凝土的抗鹽凍性能。
  6. In the low - temperature - freezing stage, the water is frozen as ice phase, while the solute precipitate as the salt phase. the velocity of ice phase growth ( vf ) in the solution and the velocity of solute diffusion ( vd ) decide that whether the heavy segregation of solute appears

    當低溫冷凍時，水以冰的形式凍結，溶質則以鹽的形式析出，形成冰鹽兩相;冰相生長速率和溶質擴散速率決定了溶質鹽是否發生大的偏聚。
  7. Through analyzing the figure of energy wasting of pump, the quality in pipes is direct proportion of the speed of pump if the speed of pump is reduced. the power of electromotor fell the cube of the speed of pump. so the energy wasting of constant pressure water supply based on variable frequency speed regulating technology is envident less than the traditional mode is used throttle to supply water

    分析水泵工況的能耗比較圖，可以看出利用變頻調速實現恆壓供水，當轉速降低時，流量與轉速成正比，功率以轉速的三次方下降，與傳統供水方式中用閥門節流方式相比，在一定程度上可以減少能量損耗，能夠明顯節能。
  8. Thermodynamic analysis on wet compression process is done in this thesis and studies are done on ideal wet compression process, actual wet compression process, water droplet evaporative rate, wet compression work, inlet evaporative cooling, wet compression efficiencies and water droplet breaking. and thermodynamic model of wet compression process is established, which gives out rules of and methods to calculate wet compression parameters

    本文從熱力學的角度對濕壓縮過程進行了分析，分別對理想濕壓縮過程、實際濕壓縮過程、水滴的蒸發速率、濕壓縮功、進氣蒸發冷卻、濕壓縮效率和水滴的破碎等進行了研究，建立了濕壓縮過程的熱力學模型，給出了濕壓縮過程狀態參數的變化規律和計算方法。
  9. In addition, according to difference between the top - level materials and the low - level materials, the model of leveling the mat erial flow is set up separately. furthermore, the model of leveling the material flow with constrain of resource supplying limit. in the model of optimization on the workload, the mutual effect of line balancing and scheduling is analyzed by an instance ; the factors of line balancing, scheduling, and system parameters, such as workstation length, the launch rate are taken into considered

    在基於負荷的多目標協同優化模型中，通過實例分析了平衡設計與排產設計對系統目標的交互影響，綜合了流水線的平衡設計和排產設計與工作站長度、產品投放速率等系統參數對系統的影響來優化混合流水生產系統設計，建立了在2種工作站類型與2種假設情形構成的4種組合下的優化模型，給出了一個優化實例。
  10. Based on comparison of several technical schemes, the method of sand bedding pre - elevating and step water - filling pre - compressing is adopted. so the dissertation is consist of two parts : ( 1 ) the applicability study for the method of sand bedding pre - elevating and step water - filling pre - compressing, including numerical analyses for the thickness of sand bedding, the consolidation, settlement and stability of foundation, drainage, possibility of foundation liquefaction under seismic loading, et al. ( 2 ) monitoring at construction stage and checking the effect of foundation treatment, including the measurements of the settlement velocity and non - uniform settlement of ring beam under the tank, pore pressures and horizontal displacements in foundation, the pressure distribution at the bottom of oil tank and the strength increase of soils

    通過多種技術方案比較，最終選擇了技術先進的砂墊層預抬高分級充水預壓法，論文工作主要由以下兩部分組成： （ 1 ）砂墊層預抬高分級充水預壓法的適用性研究，其中包括砂墊層厚度、地基沉降與固結度、地基穩定性、降水、地震作用下砂土液化的可能性等方面的計算分析； （ 2 ）施工監測與地基處理效果檢驗，其中包括油罐環梁基礎沉降速率與不均勻沉降程度、各分級充水加載階段地基超靜孔壓與深層水平位移、油罐底板壓力分佈及地基土強度增長等方面的實測與數據分析。
  11. For the real time performance need of the low speed speech compress algorithm and the asic implement of the transfer process between programs, the design is put forward in the paper, in which state registers control the cross access between operator and memory, register windows are used for the parameters transfer, and the technique of hardware controlling is used to avoid pipeline conflict, so that the main problems of the transfer process in tr600 are solved effectively

    摘要針對低速率語音壓縮演算法對處理器系統實時處理復雜運算的性能要求，就程序調用過程的asic實現問題進行了對比與分析，進而提出了用層次狀態寄存器控制存取運算元對存儲體交叉訪問的方法，並結合運用寄存器窗口傳遞參數的功能，以及利用空指令硬布線處理流水線沖突的方法，有效地解決了tr600晶元中調用過程存在的主要問題。
  12. In view of the poor thermal stability of polyoxymethylene ( pom ) induced by the residual catalyst and unstable end groups formed in the synthesis of pom. the pom was treated by amine, and the effects of the variety of amine compounds, treatment technology and water content on the thermal stability of pom were investigated ; the effect of triethanolamine on the thermal stability of pom was further studied by means of isothermal mass loss, isothermal mass loss rate, and formaldehyde emission amount

    摘要針對聚甲醛由於合成中殘留催化劑及不穩定端基導致其熱穩定較差的問題，採用胺對聚甲醛進行處理，並考察了胺種類、胺處理工藝及水用量對聚甲醛熱穩定性能影響；採用等溫熱質量損失率、等溫熱質量損失速率、甲醛釋放量分析等方法對三乙醇胺對pom的熱穩定作用進行了進一步研究。
  13. The redox of v ( ) / v ( ), v ( ) / v ( ) couple on the graphite displayed one electron quasi - reversibility. it is proved that trace in3 +, sb3 + can inhibit cathodic hydrogen evolution during the charge process by increasing the hydro - gen overvoltage in addition that sb3 + is a stabilizing / kinetic enhancing ion. during the charge / discharge process, cross - mix and self - discharge rarely happened. the maximal energy density of the lab - level vanadium battery is 21 wh / kg. the capacity efficiency of the lab - level vanadium battery is as high as 94. 7 %

    釩電池充電末期，會發生水的電解反應，痕量銦離子的加入提高了析氫過電位，抑制了充電過程中負極氫氣的析出；銻離子的加入不僅可以抑制氫氣的析出，還提高了正極反應速率，增強了正極表面的穩定性。實驗中得到的最高質量比能量為21wh / kg ，充放電過程中僅有極少的交叉混合和自放電發生，自製釩電池的容量效率可高達94 . 7 %
  14. Degradation dynamics of the herbicide butachlor were investigated in nonrhizosphere soil, and various crops rhizosphere soils with or without inoculation treatment. the population dynamics of the cultureable microorganisms capable of utilizing butachlor as sole c and energy source were estimated with most probable number method in the process of butachlor degradation

    本文考察主要作物棉花、小麥、玉米、水稻等作物根際土壤、接種后根際土壤和非根際土壤中除草劑丁草胺的降解速率，同時採用最大可能數（ mpn ）法測定分析丁草胺降解過程中丁草胺降解菌的變化動態。
  15. In the macroscopical field : ( 1 ) the relationship between the moisture and the speed of average collapse was attained, that is, the speed of average collapse will increase with increasing of the moisture at first, but it will decrease when the value get to certain max with increasing of the moisture ; ( 2 ) the model of relationship between the pressure and the speed of average collapse was established on the basis of experiment. the conclusion of that the speed of average collapse bouncing increase with increasing of the pressure was attained and the relationship between stress and distortion was established ; ( 3 ) the method of synthetical evaluation for collapsibility loess under the effect of time, pressure and moisture was offered

    在宏觀角度上： （ 1 ）以遼寧阜新地區黃土試樣的固結試驗數據為分析對象，得到了黃土濕陷速率與含水量的關系曲線呈單峰狀態的結論，即黃土濕陷速率在土體浸水初期會隨著含水量的增加而增大，但當含水量超過某一數值趨于飽和含水量時，黃土濕陷速率卻隨著含水量的增加而減小； （ 2 ）立了黃土濕陷速率與壓力之間關系的數學模型，得出了黃土濕陷速率隨壓力的增大而呈階越增長的結論以及阜新地區濕陷性黃土的本構關系； （ 3 ）提供了在時間、含水量及壓力等因素共同作用下，對黃土濕陷性進行綜合評價的方法。
  16. Three kinds of inflows with different combination of temperature and salinity are studied. results show that difference of diffusion between temperature and salinity have little effect on mean flow fields. but significant effects will arise when components are distinct in contribution to water density

    成果分析指出了溫鹽共同作用引起的高雷諾數紊動浮力流動受溫度和鹽度的分子擴散速率差異的影響很小：但是因各組分對環境水體密度影響差異會造成不同的浮力流動特徵。
  17. This article takes hanging off and wide fluctuation of transmition velocity of adsl as example, then analysis centers on the discerte multiple tone and the principle of channel load assignation. from analysis above article points out the root of adsl being sensible of noise signal. at last, reserches effects that window function and barrier effect on frequency and adopts fft to work out the noise power of adsl

    本文以電信現在推出的adsl傳輸中鏈路經常掉線和傳輸速率經常大范圍波動為例，重點分析了adsl所使用的dmt調制方式和注水演算法分配通道載荷方式原理，由此指出adsl對噪聲信號敏感的根源，在得到問題的根源之後，分析了窗函數和柵欄效應對頻譜的影響，採用fft方法計算adsl線路的噪聲功率譜，為adsl線路測試提供了可靠的理論依據。
  18. We select crm without coal as reference ; select semi - dynamic atmosphere to operate machine ; use the method fixing the temperature of hearth and that of sample holders when the analysis begins, which ensures the consistency of heating samples ; adopt the dta curve of " at - t " to analyzing crm heat, which decreases possible influences from the fluctuation of heating velocity ; draw conclusions that crm proportion and granularity influence the analysis little, but not crm moisture and coal species ; advise that there be a warm - up to the crm with much moisture before analysis and a modification to the crm with variable species of coal ; then obtain the feasible operation conditions and operation curve ( together with the curve function )

    選用白生料作標樣；選用準動態測定氣氛；採用恆定爐膛溫度（ 650 ）和固定支持器初始溫度（ 60 ）的方法，確保了樣品受熱過程的一致性；採用「 t ? ? t （時間） 」 dta曲線分析生料熱，減少了升溫速率的微弱變化對測定結果的可能影響；得出生料配比和細度對差熱儀測定結果影響小、生料水分和煤品種影響大的結論，並提出對大水分生料測定前要進行預熱處理、對不同品種煤的測定結果要進行修正的建議。最終，得到了差熱儀適宜的工況條件和工作曲線（及方程） 。
  19. The raw cement slurry is a kind of two - phase solid - liquid suspension. from the relation of shear stress and shear velocity, it ' s belong to noi ? ncwtonian fluid

    水泥生料漿是一種固液兩相懸浮液，從流體的剪切應力與剪切速率的關系來分析，它是屬于非牛頓液體范疇。
  20. This paper analyzes the influences of rainfall on soil nail support system, and reveals stabilization characteristics of earth fill prototype body in supporting or non supporting not related to the conditions of rainfall but be controlled by velocity increment of bulging and its critical value

    分析了降雨與非降雨條件對土釘支護體系的影響，並揭示了填土體在無支護或支護情況下的穩定性不與降雨條件有關，而是受控于滲水速率增量及其臨界值。
分享友人
分享到 Line

分享到臉書