柱載重 的英文怎麼說

中文拼音 [zhùzǎizhòng]
柱載重 英文
column load
  • 載 : 載Ⅰ名詞（年） year : 一年半載 six to twelve months; six months to a year; 三年五載 three to five ...
  • 重 : 重Ⅰ名詞（重量; 分量） weight Ⅱ動詞（重視） lay [place put] stress on; place value upon; attach im...
  • 載重 : load; carrying capacity
  1. The main components of the latter are multi - rib sandwich panels, including floor slabs and wall slabs. reinforced concrete conformation columns are set where the longitudinal walls and latitudinal walls intersect and copulative beams are set where floor slabs and wall slabs intersect. they play a role of linking and transferring loads, bearing a small part of loads at the same time

    無骨架體系的主要承重構件是密肋夾芯板（包括樓板和墻板） ，縱、橫墻相交處設鋼筋混凝土構造（連接）柱，墻板和樓板相交處設連系（圈）梁，連系梁和柱主要起連接和傳遞荷載作用，也承擔少部分荷載。
  2. Establishing an human spine dynamic model is an significan event to study spine injured biomechanics of pilot " s ejective injury, parachute opening, landing and study the endurance to impact loading on human spine. in this paper, the huston " s method of kane " s equations is developed so that it can be applied to the multibodysystem including translation between the bodyies. the dynamic model of human spine is provided basing on these theories, while the big movement of spine is considered. the deformation of vetebra is far smaller comparing with the intervetebra disc, so the spine is considered into multibodysystem including rigid bodies ( vetebra ) and the flexible bodies ( intervetebra disc ). the computer solution correspond with the results of the large scale human impact test. the rigid coefficient factors and the damping factor of intervetebra joints are obtained

    人體脊柱動力學模型的建立對研究飛行員彈射救生、傘兵跳傘開傘、著陸等脊柱損傷的生物力學以及研究人體脊柱耐受沖擊載荷的極限問題都具有重要意義.首先發展了凱恩方程的休斯頓方法，使其可應用於變形體連接的多體系統，並以此理論為依據建立人體整椎脊柱沖擊動力學模型，此時考慮脊柱的大位移運動，每個椎骨的變形相對椎間盤的變形小得多，把脊柱看成由剛體（椎骨）和變形體（椎間盤）組成的多體系統.並以大型真人坐姿沖擊實驗結果進行了擬合，最後得到腰椎間關節剛度系數因子和阻尼系數因子
  3. But during the 1994 northridge earthquke and 1995 hyogoken - nanbu earthquke, many steel beani - to - column connections were damaged which indicated that cognition on the capacity of this type of joints was rather inadequate. in order to avoid similar damages in the future, analysis on response of beam - to - column connections under cyclic loads is not only significant from the theoretical aspect, but also important in practice

    然而， 1994年美國northridge地震和1995年日本的阪神地震中，大量鋼框架樑柱連接發生破壞，顯示出人們對于剛性樑柱連接的受力性能和破壞機理認識還相當不足。為了避免人員傷亡和經濟損失，對鋼框架樑柱連接研究其在循環荷載作用下的反應，不僅具有重要的理論意義，更具有重大的工程實用價值。
  4. This paper related to a practical project that a high school is big bay building with teaching, experiment and studying, aim at the higher seismic fortification criterion region ( 8 degree of seismic fortification intensity ), aseismic disadvantageous building site ( iii type site ), and the building loading much ( the building " self - weight is over the 9. 0 kn / m2 ). compared to r. c. rectangle columns, studying the aseismic performance of the r. c. special - shaped columns pure frame structure, the r. c. special - shaped columns frame - truss structure and the r. c. special - shaped columns frame - shear wall structure

    本文，結合某中學大開間教學實驗綜合樓的具體工程，就抗震設防烈度較高地區（ 8度）和抗震不利的建築場地（類場地） ，並且建築物所受荷載較大的情況（建築物自重超過9 . 0kn m ~ 2 ） ，通過與矩形柱分析比較的方式，研究了異型柱純框架結構、異型柱框架-桁架結構，以及異型柱框架-剪力墻結構的抗震性能。
  5. The dynamic response of cylindrical shells and conical shells under radial non - uniform impulsive loading has an important application in the filed of military and civil engineering. in this dissertation, the problem of transient response of the cylindrical shell under longitudinal line - loading and that of the conical shell under cosinoidal impulsive loading are studied, and some useful conclusions that have important significances in both theoretic studies and engineering applications are obtained

    圓柱殼和圓錐殼在側向沖擊載荷作用下的動力響應具有重要的軍事和民用工程背景，本文對縱向線載荷作用下的圓柱殼瞬態響應問題和餘弦沖擊載荷作用下的圓錐殼瞬態響應問題進行了研究，取得了一些具有重要理論意義和實用價值的研究成果。
  6. Main product of this company includes more than 200 varieties and more than series such as mine shaft hoisting machine series, mine hoist series, dispatch hoist series, prop - pulling hoist series, building hoist series, flight conveyor series, heavy - load gear reducer series and electric equipment

    公司主要產品有：礦井提升機系列，礦用提升絞車系列，調度、回柱絞車系列，建築卷揚機系列，刮板輸送機系列，重載減速機系列，電氣控制設備等十幾個系列近200多個規格品種的產品。
  7. The elastic methods are beam - columns method, the pseudo load method, the pseudo lateral load method, the iterative gravity load method and the negative rigidity method

    常用彈性分析的方法有：樑柱法、虛擬荷載法、虛擬側向荷載法、迭代重力荷載法和負剛度法。
  8. The heavy walls of the structure transmitted their loads to the steel frame, the columns of which collapsed.

    建築物的重型墻壁把它的荷載傳送到鋼構架上面來，構架支柱已經被折斷。
  9. Among the results of these researches, cylindrical gears with curvilinear tooth trace have merits as follows : higher bending stress, low noise, better lubrication conditions, and no thrust forces. so this kind of gear can be considered to substitute the helical gear and herringbones

    本文提出的弧齒線圓柱齒輪是一種新型齒輪傳動形式，具有傳動平穩、噪聲低、潤滑性能良好、輪齒彎曲疲勞強度大的特點，因此該齒輪可以作為斜齒輪和人字齒輪的替代品用於高速重載場合。
  10. First, the dynamic stability of braid composite cylindrical shells with the influences of some main factors is introduced. the general governing equations for the nonlinear dynamic stability is obtained. by the hamilton principle. the creep buckling analysis of braid composite cylindrical shells under axial compression and the dynamic stability under nonconservation force are discussed as emphases. in creep buckling question, by means of theoretical analysis, the instaneous critical load and durable critical load of viscoelastic braid composite cylindrical shell under axial compression are obtained and the numerical example is given

    首先介紹了編織復合材料圓柱殼在幾種主要因素影響下的動力穩定性問題，用hamilton原理建立非線性動力穩定性問題的一般性基本方程。然後重點討論了編織復合材料圓柱殼軸壓下的蠕變屈曲問題及非保守力作用下的屈曲問題。對蠕變屈曲問題，通過理論分析來得到了編織復合材料圓柱殼的瞬時彈性臨界載荷和持久臨界載荷，給出了具體的算例。
  11. The center brace, also named guide pillar, serves a dual purpose, not only surpporting all the loads at stage of construction, but also transmitting upper loads down to the foundation, as a part of the column after the top down construction, its designing and construction are more strict

    中間支承柱又稱導柱，在逆作施工中起著雙重作用，既要支承逆作法施工中的各種荷載，又要在逆作法完工後，作為主體柱子的一部分，起著將上部荷載傳遞給基礎的作用，因而設計與施工均對其提出了較高的要求。
  12. The studies of the anchorage performances of steel column bases under uniaxial reversed loads are carried out through tests and theory

    為此本文進行了單向重復加載下的鋼筋混凝土承臺-鋼柱腳試件錨固性能試驗研究和理論分析。
  13. Thus it is necessary to study moment resistance, rotation stiffness and rotation capacity of the joints. in this paper, six specimens on end - plate composite beam - to - column joints and two specimens on end - plate composite beam - to - column joints were designed to subject to static load. the factors of m - characteristics about semi - rigid composite joints, including bolts, profiled steel sheeting, beam, column, stiffen rib and reinforcement, are studied

    本文設計了6個端板型鋼-混凝土組合樑柱節點與2個端板型純鋼樑柱節點，通過對這些試件的靜力荷載試驗，重點研究了端板型鋼-混凝土組合節點的彎矩-轉角性能的影響因素，包括高強螺栓、壓型鋼板、型鋼梁、型鋼柱、加勁肋，以及混凝土板內縱向鋼筋配筋率等。
  14. Steel - concrete composite columns are the important load - bearing members in steel - concrete composite structures, in general cases, columns are subject to biaxially eccentric load and sometimes lateral load with its cross sections in various kinds of shape

    鋼-砼組合柱是組合結構中的主要承重構件，通常承受雙向偏心軸向荷載、有時還伴有橫向荷載的作用，其截面形式也多種多樣。
  15. Yingxian ancient wooden pagoda is a flat - form tall building, which was formed by the superposition of monolayer temples. the height of 67. 31 meters made it encountered two unprecedented puzzles : firstly, with the height increased whopping, wind resisting and aseismatic capability become the main question of the whole structure ; secondly, because of the weight increased unconventionally, members of the lower 1 ~ 3 floors hold overloading perpendicular to grain and they brought large vertical deformation

    相對於一般殿堂結構，高度和自重的成倍增加，使木塔遇到前所未有的兩項難題:其一是因自重增加，使承受上層柱軸向荷載的梁（普拍枋和梁? ）橫紋局壓應力成倍地超過設計強度而產生嚴重的壓縮變形甚至劈裂，導致木塔整體豎向變位。
  16. According to the results of this study, an ideal social support model that helps disadvantaged women to improve their quality of life was suggested : familial supports are the foundation of receiving other social supports ; community supports are in the core of the support system, and play the most strong functions in helping individuals to break away from plight ; market resources and occupational supports are the path that leads to a new life ; relatives, neighbors, friends and colleagues are the promoters of their interests, who form the basis of an individual ' s social support over the life course ; social security is the last support network that helps disadvantaged women to meet their basic needs in life

    根據研究結果，我們提出了一個有助於改善弱勢婦女群體生活狀況的理想社會支持模式：家庭支持是基礎，是獲取各種社會支持的出發點和歸宿；社區支持是支柱，是整個支持系統的核心部分，它發揮著最強大的作用；市場資源和職業支持是承重梁，承載著新生活的希望，是擺脫困境的重要途徑；親戚、鄰居、朋友、同事等是護航者，發揮著保駕護航的作用；社會保障是這個支持系統的最後一張安全網，它的健全完善將能為廣大弱勢婦女群體起著遮風避雨的作用。
  17. Weng, c. c., yin, y. l., wang, j. c., liang, c. y. and huang, c. m., “ experimental investigation on rectangular src columns with multi - spiral confinements, ” 4th international conference on earthquake engineering, taipei, taiwan, oct., 2006

    尹衍梁、翁正強、王瑞禎、梁景裕，預鑄五螺箍src柱之軸壓與反覆載重抗震試驗，第四屆海峽兩岸及香港鋼結構技術交流會，上海， 11月， 2006 。
  18. Specification for standard automatic roller - type coupling for semi - trailers of 7 tons to 143 4 tons laden weight

    裝載重量為7至14 . 25噸的半掛車用的標準自動滾柱式連接器規范
  19. Oa commonly affects the hands as well as the spine and large weight - bearing joints such as the hips and knees and less commonly the feet and ankles

    骨性關節炎通常累及手、脊柱和大的載重關節例如髖和膝關節，足和踝較少受到累及。
  20. Specification for standard automatic roller - type coupling for semi - trailers not exceeding 71 4 tons laden weight

    載重量不超過7 . 25噸的半掛車的標準自動滾柱式聯軸節規范
分享友人
分享到 Line

分享到臉書