框支梁 的英文怎麼說

中文拼音 [kuàngzhīliáng]
框支梁 英文
kzl
  • 框 : 框名詞（框架; 框子） frame; case
  • 支 : Ⅰ名詞1 （分支; 支派） branch; offshoot 2 （地支） the twelve earthly branches3 （姓氏） a surname...
  • 梁 : 名詞1 （屋架中架在柱子上的長木） beam 2 （通常也指檁） purlin 3 （橋） bridge4 （物體中間條狀隆起...
  1. For reinforcement concrete corbel with the shear span to depth ratio ( a / ho ) less than 1, has its performance of mechanics that is close to cantilever deep beams, it is an important kind of components in architectural structure which sustains roof trusses, brackets, tray " beams, frame " beams, wall " beams and crane " beams

    剪跨比a h _ 0 1的短鋼筋混凝土牛腿，其受力性能接近於懸臂深梁，在建築結構中是支承屋架、屋面梁、托架、托架梁、框架梁、墻梁和吊車梁等的重要構件。
  2. Abstract : to account some difficult problems in theoretical calculation of blasting demolition of buildings, the criterion for disintegration of brick - concrete structures, blasting height of frame structure, counteracting force of supports are analyzed. a numerical simulation is demonstrated for structure ' s destabilization and dilapidation in the process of blasting demolition of buildings such as chimney and bridge, which services a guide for theoretical study and practice of blasting demolition of buildings

    文摘:針對建築物爆破拆除理論計算難以把握的幾個問題，如磚混結構解體的判據，框架結構建築的爆高、支座反力，以及框架結構失穩和煙囪、橋梁爆破拆除倒塌過程的數值模擬方法，進行了分析和說明，為建築物爆破拆除設計理論研究與施工提供了參考依據。
  3. According to these, applying the virtual work theory, this paper analyzed the influence of active beam link on the terminal carrying capacity, stiffness and ductibility of three types of ebsf

    接著在此基礎上應用虛功原理，分別研究了耗能梁段長度對d型、 k型和v型三種偏心支撐框架的極限承載力、剛度以及延性的影響。
  4. Eccentrically braced frames ( ebfs ) combines the strength and stiffness of concentrically braced frames ( cbfs ) with the inelastic behavior and energy dissipation of moment - resisting frames, especially inelastic deformation of link absorbs seismic energy

    偏心支撐框架結合了中心支撐框架的強度、剛度高和普通抗彎框架的延性、耗能性能好的優點，通過耗能梁段的非彈性變形耗散大量輸入結構的地震能量。
  5. The horizontal beam that forms the upper member of a window or door frame and supports the structure above it

    （門窗的）過梁構成門窗上部框架的平行梁木，並支持上面的構架
  6. This paper applies nonlinear finite element program bsnfem to analyze the behaviors of eccentrically braced steel frames under cyclic load. the study that comprehensive and systematic analyze the factor of links length, thickness of links flange, distance of links rib, thickness of links rib and angle of brace to be changed affect energy - dissipation capacity of d shape and k shape eccentrically braced steel frames have been some studied before. this paper fills the black in the filed factor of high - span ratio, brace stiffness and brace - to - beam connections to be changed affect energy - dissipation capacity of d shape and k shape eccentrically braced steel trames and any factor to be changed affect energy - dissipation capacity of y shape eccentrically braced steel frames

    對耗能梁段的長度、耗能梁段腹板的厚度、耗能梁段翼緣的厚度、耗能梁段加勁肋的間距、耗能梁段加勁肋的厚度、支撐的夾角等因素的改變對d形、 k形偏心支撐鋼框架耗能的影響，前人已有一些研究，本文對這些因素的影響進行了全面系統的分析，完善了理論分析的不足；而結構高跨比、支撐剛度、支撐與梁的連接形式等因素對d形、 k形偏心支撐鋼框架破壞機理的研究以及各種因素對y形偏心支撐鋼框架破壞機理的影響，則很少有人涉及，本文對此也進行了深入系統的分析，填補了這一研究空白。
  7. A support for a beam in the framework of a building

    柱，桿建築物框架中橫梁的支撐物
  8. Based on the quick development of computer network, this thesis deals with how to apply network technology to civil and architectural engineering. the finished research contains as follows : the research on reraote - network - monitor - system, the realization of the data collection of ddc ( direct digital controller, multi - loop data circuit monitor ), the communication, the real time control of remote network. moreover, the remote - network - monitor - system is applied in the engineering practice in which monitoring the security of high framed girder and plank

    其中包括：研究了遠程網路檢測系統基本結構，實現了下位機（多路數據巡迴檢測儀）現場數據採集、下位機與上位機通信、遠程網路實時控制採集過程等；成功編制了下位機與上位機通信軟體和用於動態更新、存儲數據的數據庫系統；將遠程網路檢測系統應用於工程實例，完成了高層建築框支梁安全性監測、不抽芯板專利技術檢測。
  9. In this paper, a new type of slim beams with steel sections encased in a prorietary sp slab were investigated experimentally and theoretically, including a simply - supported beam, a framed beam and a cantilever beam

    摘要對一種新型組合梁鋼混凝土組合扁梁的承載力性能進行了試驗研究，共完成3根不同形式的構件：簡支組合扁梁、框架組合扁梁和懸臂組合扁梁。
  10. Then calculate the member individually, including the calculation of load - behavior capacity, the calculation of high strong bolt with the method of connection with beam, the design method of stiffening rib, etc. the text educed the above - mentioned formula theoretically. 5. linking with windmill flat engineering example in the third youth flat engineering of yi zhuang development area, beijing, it and steel frame constitute the steel frame ? steel shear wall with slit system respectively are analyzed the whole structure by ansys and satwe

    既利用剛度等效的原則，把其轉換為工程計算軟體可以計算的支撐體系，然後對構件進行單獨計算，包括承載力的計算、和梁接合方法? ?高強螺栓的計算、加強肋的設計方法等內容； 5 、帶縫鋼板剪力墻與鋼框架形成鋼框架? ?帶縫鋼板剪力墻結構體系，結合北京亦莊經濟開發區青年公寓三期工程中的風車公寓工程實例，分別採用ansys和satwe進行了結構整體分析，兩者的計算結果相吻合。
  11. First of all, the paper carried out test study on four two - spanned model members of fsmrcwb, including three 1 / 2 - scaled two - storeyed models and one 1 / 3 - scaled three - storeyed model. the study considered such factors as span ratio - l1 / l2, height - span ratio - hb / l of the beam, and cavity etc. the paper analyzed the test results, including analysis on mechanical property of the composite wall beam under vertical loads, and failure mode, deformation capacity, aseismic performance under horizontal loads and constant vertical loads

    首先，進行了三個兩跨兩層和一個兩跨三層的框支密肋復合墻梁的模型試件試驗研究，主要內容包括：框支密肋復合墻梁在豎向荷載作用下的受力性能，在豎向荷載與水平低周反復荷載共同作用下的受力性能、變形性能、滯回性能和破壞形態，並將框支密肋復合墻梁試驗與框支砌體墻梁試驗進行對比分析。
  12. Then at the elastic - plastic state taking advantage of the brace and eccentric distant, we can control the inelastic deformation of the braced frame. the reinforced concrete frames with eccentric brace conform with the earthquake - resistant principle and its seismic properties have improved remarkably. during the lowly circular and repeated loading, the load - bearing, deformation, and ductility of the eccentrically braced reinforced concerete frames were measured

    偏心支撐鋼筋砼框架的設計意圖是當結構在抵抗外力作用時，在彈性階段結構有較高的抗側剛度，而當結構進入彈塑性階段時，利用支撐和耗能段梁的變形使結構的非彈性變形可控，體現了抗震結構「先剛后柔」的原則，使鋼筋砼框架的抗震性能得到有效地改善。
  13. According to the pseudo static tests on two specimens of transfer floor from inclined column to framed short - leg shear wall, which are subjected to the vertical loads and the horizontal cyclic loads, in this paper the stress distributions, final failure model of the specimens, paths of the load transfer and the mechanical behaviors of the transfer beam are studied in detail, the ductility and energy dissipation of the specimens are also specially studied

    摘要通過對兩榀框支短肢剪力墻斜柱轉換結構在豎向荷載及水平低周反復荷載共同作用下的擬靜力試驗，分析了試件的應力分佈狀態、破壞形態、荷載傳遞規律以及轉換梁的受力性能和試件的抗震性能。
  14. For three - short - pier shear wall under vertical loads, the results remain the same, and transfer beam at this moment will work with the middle pier, constituting a t - shape beam to sustain the moment and axial tensions together. 4. under the horizontal loads, the inner stress distribution in the frame supported short - pier shear wall shows similarities with that of the short - pier shear wall underneath the fastened supports

    4 、水平荷載作用下，框支短肢剪力墻墻肢內的應力分佈形式接近於下部固支的短肢剪力墻的應力分佈;轉換梁承受上部墻肢傳遞的拉力、剪力和彎矩，當短肢剪力墻墻肢數量較多時，轉換樑上、下邊緣拉、壓應力交替出現，剪應力的最大值處于洞口下方的轉換梁體內。
  15. Basing on the feature of the structure member, the structure is simplified to a 3 - d model consist of space beams and shells, so we can make response spectrum dynamic analysis on the finite - element models. at last nonlinear finite element dynamic analysis was made about the structures. the calculated results reveal the rule of dynamic response about model the and show that the aseismic behaviour and failure mechanism of shear wall structure with src supporting frames and src girder transfer floor is better than that of rc one

    在7度多遇和罕遇地震力作用下，通過對振型、側向位移、傾覆力矩和剪力在給定抗側力結構間分配的比較，以及對框支柱和剪力墻的地震響應、轉換層樓板應力比較等模擬分析，得到型鋼混凝土梁式轉換層框支剪力墻結構較鋼筋混凝土梁式轉換層框支剪力墻結構抗地震力特性上有較明顯的改善的結論。
  16. The paper also compared fsmrcwb with frame - supported masonry wall beam ( fsmwb ). secondly, by means of finite element method ( fem ), the paper studied stress distribution in fsmrcwb under vertical loads and under elastic earthquake force with constant vertical loads respectively

    其次，進行了框支密肋復合墻梁的線彈性有限元分析，主要研究框支密肋復合墻梁在豎向荷載作用下的應力分佈，以及在豎向荷載與小震水平地震力共同作用下的應力分佈，並就試驗結果與有限元分析結果進行對比分析。
  17. In this thesis the main work finished by author is in followings : firstly, in order to understand the influence of transfer girders at different heights on behaviors of frame structures under static loads, some examples were analyzed and were compared. the results indicate that compared with ordinary frame, the inner forces of the structures under the transfer girders doubly increase, while the increases of inner forces above transfer girders are smaller

    本文對高位轉換框支框架結構的受力性能進行了研究，完成的主要工作有: 1 .為了了解靜力荷載下轉換層設置位置對結構受力性能的影響，對高層框架結構在不同高度設置梁式轉換層時的受力及位移特點進行研究。
  18. In the light of the deficiency of the routine calculating method in the application of multi - curve style prestress steel bar in the large span structures, an applied program is written to calculate the loss of the prestress. fem is used to calculating the concrete stress of the frame beam under prestress load, in the process of which, many successful improvements have been made in the element division, load application and the treatment of the support restraint

    針對常規計算方法在大跨結構中預應力筋多波曲線配置應用中的不足，編制了計算預應力損失的應用程序；用fem計算了框架梁在預應力載荷作用下的混凝土應力，其間在單元劃分、載荷施加及支座約束處理上有成功的改進。
  19. 2. for frame supported double - short - pier shear wall under vertical loads, the non - noding area of transfer beams turns into a member of flexure and tension with small axial force, and bending stress dominates in the stress distribution on the cross - section. in the nodding area, the axial force increases while the bending effect is small

    2 、框支雙肢短肢剪力墻在豎向荷載作用下，轉換梁的非節點區為一拉彎構件，軸向拉力較小，截面的應力分佈以彎曲應力為主;在節點區，軸向拉力效應增大，而彎曲效應很小。
  20. To date, structure engineers still adopt designing method of frame - shear wall structure rather than considering common action of pier wall and transition beam and the problem of stress - distribution complication arises from here. this paper provides the research object which is a 13 - stories frame supported short pier shear wall structure with different pier strength coefficients and integrity coefficients, focus on stress distribution of two - short - pier shear wall and three - short - pier wall under vertical loads and horizontal loads. it also concludes variational rules of internal force of transition floors in this structure

    本文以具有不同整體性系數和肢強系數的13層框支短肢剪力墻結構為研究對象，運用ansys8 . 1有限元分析軟體，研究了雙肢墻、三肢墻和轉換梁等結構構件在豎向荷載與水平荷載作用下的應力分佈特點，總結了帶梁式轉換層的短肢剪力墻結構中轉換梁的內力隨著墻肢截面高度的變化規律，為框支短肢剪力墻結構的分析和設計提供了理論基礎。
分享友人
分享到 Line

分享到臉書