機器對象 的英文怎麼說

中文拼音 [jīqìduìxiàng]
機器對象 英文
machine object
  • 機 : machineengine
  • 器 : 名詞1. （器具） implement; utensil; ware 2. （器官） organ 3. （度量; 才能） capacity; talent 4. （姓氏） a surname
  • 對 : Ⅰ動詞1 （回答） answer; reply 2 （對待; 對付） treat; cope with; counter 3 （朝; 向; 面對） be tr...
  • 機器 : 1. （用來轉換或利用機械能的機構） machine; machinery; engine 2. （引申為機構） apparatus; organ
  1. The studying object in this paper is leg mechanism of biped walking robot, whose single leg is basing on stewart plat

    本文研究的對象是單腿基於stewart平臺的兩足並聯步行機器人腿機構。
  2. Fsmail adopts and implements the asynchronous event driven mechanism, with all those network i / o operations in the server working under the non - blocking style ; accomplishes object - oriented heap with the dynamic array, adapted to any type of data ; adopts the multi - queue scheduling mechanism based on a fsm, easily to fulfill the extentions of delivery funtions ; fulfills the non - blocking domain name resolvement mechanism and the caching of the resolved results ; implements the non - blocking user database management and the caching of the user data recently accessed ; uses the unified memory pool management, avoiding the memory leakage and improving the performance of the fsmail server ; lastly, implements the log management server based on the c / s mode, eliminating the inconsistency of the logging metadata and being adapted to any kind of application logging

    Fsmail採用並實現了異步事件驅動機制，所有網路i o的實現使用了非阻塞方式；以動態數組實現了基於面向對象的堆隊列，屏蔽了堆數據的非一致性；使用了基於有限狀態機的多隊列郵件調度機制，為后續版本的擴展性提供了良好的介面機制；服務器內部實現了非阻塞的域名解析機制，並實現域名地址緩存；實現了非阻塞的用戶數據庫管理模塊，並實現用戶數據緩存；使用了統一的內存池管理機制，既防止了內存泄漏，又提高了服務器的性能；最後，還實現了基於c s模式的日誌管理服務器，屏蔽了日誌數據元的非一致性。
  3. Here we study the method of using com subassembly and ole automation technology to solve the integrate problem. this technology can fulfill the task of data ' s sharing and conversion, supporting the synchronization of space decision reasoning analysis and space information manipulation, realizing the seamless integration. the paper based on solving the evaluation of land using problem, by anglicizing the deficiency of gis ' s space decision and the merit of egis

    這里我作了用com技術及其統一數據傳輸機制和ole自動化功能進行es和gis集成的研究：其中，將es作為控制器， gis作為自動化對象連接起來，能很好地完成數據的轉換與共享，支持空間決策推理分析和空間信息操作的同步進行，本文由此重點討論了com及ole自動化技術。
  4. Concentri fetlock needed in ttvgt structure, and is useful for ttvgt macwi and applitalon de the analsis of the tt - vgt structure, the drict eqwt for m position h are ehabiished, for on alh won methed, a wtc appidac for the inare ~ acemen analysis of 7 - celled meded tetiahedid vgtm is propoed

    本課題以變幾何桁架宏-微機器人為主要研究對象，對機器人的位置分析、運動學、實現避開障礙物的軌跡規劃、智能控制及其系統設計開發等進行了較全面、深入的研究。
  5. For these aims, preliminary research has been carried and dcm - wv software package has been developed : the definition of waveform information object ( include haemodynamics waveform and electrocardiogram ) has been accomplished. that is the first step to fulfil dicom - support of waveform equipment

    為達到這一目的，在pc機上開發了dcm - wv軟體包，對波形類儀器的dicom支持做了初步研究：完成波形的信息對象定義，這是解決波形類儀器支持dicom標準的第一步。
  6. The design is to simulate the process of human. it can adjust the parameters of illation machine ; adopt different recognition strategies according to different states and circumstances with which the recognition object deals. at the same time, it should consider each recognition performance aim

    該識別器的設計是模仿人識別字元的行為過程，它可以根據識別對象所處的不同狀態和不同環境，調整推理機的參數和採用不同的識別策略以及選擇不同的反饋結構。
  7. Moreover, the interlingua of icent is also improved. it enhances the representation of context information for english generation. in summary, we construct a model of chinese context ccm, and study temporal information of chinese events, sub

    在今後的研究工作中，我們將對漢語篇章語言現象及其分析方法繼續進行深入的研究，進一步擴大適用語料范圍，提高漢英機器翻譯譯文的質量。
  8. By examining the new generation condutive polymer material 3 ， 4 ? polyethylene dioxythiophene ( pedt ), this paper investigated the edt monomer synthetic path and the optimum filming conditions of the compound pedt. based on this research, i also discussed the manufacturing processes and the related principles of the solid tantalum capacitors, when replacing the conventional inorganic material mno2 with the pedt as the negative pole

    本文以新一代導電聚合物材料3 ， 4 ?聚乙烯二氧噻吩（ pedt ）為研究對象，研究了edt單體合成路線及聚合物pedt的最佳成膜條件，並以此為基礎，討論了以導電聚合物有機材料pedt取代傳統的無機材料mno2作陰極的固體鉭電解電容器的制備工藝及相關機理。
  9. Based on the " fangsheng - i " robot fish of harbin engineering university auv lab, at first the analysis of the relations of pectoral fin ' s attack angle and lift in vertical plane is done in this paper, using the robot fish ' s hydrodynamic results by the panel method ' s, then setting up the motion model in vertical plane is done. finally animation the robot fish ' s motion in horizontal plane is finished

    論文以哈爾濱工程大學軍用智能水下機器人國防重點實驗室的「仿生? 」號仿魚機器人為對象，利用面元法計算的仿魚機器人水動力結果，並分析了垂直面內胸鰭的攻角與升力的關系，建立了垂直面內的模型，根據軸變形模擬了仿魚機器人水平面內的直航和偏航。
  10. After analysising the theory and characteristics of the corba and mobile agent technologies, the paper brings forward firstly a kind of mobile agent architecture - coma, and gives the solution to coma ' s asynchronous transfer, concurrent control, naming, location and intelligence mechanism in detail. furthermore, aiming at making up the flaws of the application servers based on corba in distributed group environment and solving the problem of object ' s remotion on the corba server, the paper proposes a kind of corba architecture based on mobile agent - maorb, discusses naming and transparent transfer of mobile agent in a maorb system in detail, and gives a reasonable improvement method

    本文在分析了corba和移動agent這兩種分散式技術的運行原理及其特點之後，首先提出一種應用於協同環境下的移動agent體系結構coma ，並詳細給出了coma的異步遷移、並發控制、命名和尋址，智能化機制這幾個關鍵技術的解決方法。進而，為了彌補單純的利用corba技術來構建分散式集群環境中應用服務器的不足，解決corba服務端對象的可移動性問題，本文又提出了一種基於coma的corba體系結構maorb ，詳細討論了maorb系統中移動agent的命名和透明遷移以及corba和coma的結合度問題，並給出了合理的解決方案。
  11. Suction gas pressure goes up as the compressor run at the lower speed in the lower burthen, and this is beneficial to lower systems energy - consume. when the system is controlled by wvf, the discharge change of the evaporator is not linear ; the electronic expansion valve is adopted to regulate the system superheat degree, and the controlled object is parameter time varying, accordingly, the time varying controller should be adopted

    在負荷較小時，壓縮機採用低速運轉，吸氣壓力升高，這對系統降低能耗是有利的；變頻控制時，蒸發器製冷劑流量的變化並非線性；系統中採用電子膨脹閥進行過熱度控制，被控對象具有參數時變的特性，相應地宜採用變結構的控制器。
  12. The drive client is a native implementation, whereas the mdrive client slightly belabors com - correctness in using a class factory to create sink objects

    Drive客戶端是一個本機實現，而mdrive客戶端則由於使用類工廠創建接收器對象而需要較長時間對com進行正確性分析。
  13. A conforming implementation executing a well - formed program shall produce the same observable behavior as one of the possible execution sequences of the corresponding instance of the abstract machine with the same program and the same input

    當一個符合標準的實現執行一個完備的程序時，其產生的可觀察行為應該與該實現的抽象機器對應實例依據同一程序和同一輸出產生的可能執行序列之一相同。
  14. At the same time, we improved a two - stroke fueled engine 1e40fm into the one also using the direct injection of liquid petrol gas. the electronic control system is developed whose core is m68hc11 single - chip computer which is produced by motorola ltd., and matched by other electronically - controlled circuits

    開發了以motorola公司生產的8位增強單片機m68hc11為核心，配以相應的外部電路構成摩托車發動機單片機控制系統，並以一臺二沖程1e40fm型化油器式汽油機為對象，將其改造為汽油、電控氣體噴射兩用發動機。
  15. Aiming at the medium thickness slab caster in anshan isco, numerical simulations concerning fluid flow and free surface wave process of liquid steel in mold were conducted by using the cfx4. 4, a commercial software package for fluid flow analysis, in which the metallurgical functions of a submerged nozzle, specially the submerged nozzle with three holes, were investigated emphatically

    摘要以鞍鋼中薄板坯連鑄機為對象，在商業軟體cfx4 . 4的平臺上對結晶器內鋼水流動和液面波動過程進行了數值模擬，重點研究了其所獨有的3孔浸入式水口的冶金功能。
  16. Firstly, the actuality and the development trend of software in marine engine room has been analysised, and then some problems of software in marine engine room are put forward in this paper, afer deep research to opc technology, a new opc - based framework system is put forward in this article ; then, the author has created model for opc server and designed it via using uml language, described the key function of it. furthermore the author has realized some key functions of opc server and offered some important steps ; in the end, based on the characteristic of the monitoring and alarming system in marine engine room, the author has put forward a new scheme of the whole system which is based on opc technology, furthermore the author has designed this system, discussed some methods through which the client side can call the server side easily, realized alarm and trend analysis functions

    本文首先分析了國內外船舶機艙軟體的發展及現狀，提出了目前船舶機艙軟體存在的問題，並在對opc技術深入研究之後，提出了以opc這種軟總線為基礎來搭建船舶機艙監測及報警系統的設計思路，然後，本文深入講述了opc技術的發展、技術規范、技術優勢以及它的實際應用等；選用uml統一建模語言對opc服務器對象進行了建模和設計，論述了opc服務器對象的關鍵功能機制，並通過vc實現了opc服務器的重要功能，給出了實現方法和主要的步驟；最後，結合船舶機艙監測及報警系統的特點，給出了基於opc的整個系統框架方案，並進行了系統設計，講述了客戶端對opc服務器對象的調用方法，實現報警和趨勢分析等主要功能。
  17. Cross - process communication requires a server object whose functionality is provided to callers outside its process, a client that makes calls on the server object, and a transportation mechanism to ferry the calls from one end to the other

    進程間通信需要具備以下條件：存在向進程外的調用方提供功能的服務器對象，存在對服務器對象進行調用的客戶端，並具有一個將調用從一端運送到另一端的傳輸機制。
  18. This subject combines object - oriented technology and abstracts the characteristic data of the simulator as the parameter control to encapsulate these abstract data into operational aircraft target according to object - oriented principle in order to realize c + + mechanism that have adopted, and construct the class that draws target of aircraft through data element, element parameterization, element attributes and the parameterizations of element attributes

    本課題採取結合面向對象技術，提取飛行模擬器的特徵數據作為參數控制，將這些抽象的數據依據面向對象原理封裝為可操作的飛行器對象，實現上採用c + +的類（ class ）機制，通過數據的圖元化、圖元的參數化、圖元的屬性化、圖元屬性的參數化構造飛行器對象繪制類。
  19. With prestressed rolling mill of the middle steelworks of taiyuan iron and steel limited group company as the researched object, this article analyze the existent questions and research the initial stress of prestressed rolling mill and computer control system, analyze the design thought of prestressed rolling mill and clarify the relationship between the dimensional precision of rolled material and the rigidity of base of rolling mill and the main method to increase the rigidity of base of rolling mill, analyze how to confirm the rigidity, sectional area of handle and post, and pretightening force, put forward the viewpoint that the key to assure great rigidity is to assure that the remnant initial stress is always positive during rolling, and develop intelligent control system with plc as the core on the basis of the former research to assure that the remnant initial stress is always positive during rolling

    本文以太鋼集團公司中型型鋼廠預應力軋機為對象，分析了該廠預應力軋機所存在的問題，對預應力軋機的預應力以及微機控制進行了系統研究；分析了預應力軋機的設計思路，闡明了軋材尺寸精度與軋機機座剛度的關系及提高軋機機座剛度的主要途徑；分析了預應力軋機設計過程中預應力軋機的剛度、預緊拉桿和機架立柱斷面積及預緊力的確定；提出了預應力軋機保證高剛度的關鍵就是「確保軋制過程中，殘余預應力始終大於零」的觀點；在前述研究的基礎上開發了以可編程邏輯控制器為核心的智能監控系統，以確保「軋制過程中，殘余預應力始終大於零」這個要求。
  20. It also designs the mechanism of realizing audio / video conference. in java runtime environment, a better method can be taken, this is to say, we expand the conception of jmfs " multiplexior ", getting the " audio mixer " object to manage the audio stream and getting the " video mixer " object and the " token click and preempt " control mechanism object to manage the video stream. at last this solution method gives afford the facts below : the quantities of persons who join the audio collaborate do not been restricted and people do not need a voice authority before they speak

    本文還對音頻視頻協作會議內部實現機制進行了重新設計改進，給出一種針對java運行環境的優化實現方法，它對jmf中的復用器對象的概念進行擴展，引入「混音器」處理音頻流、視頻復用器和「令牌控制機制」處理視頻流，提供了不限用戶數量和是否擁有發言權條件限制的音頻協作手段，也提供了用戶數量及發送權受限的視頻交流手段。
分享友人
分享到 Line

分享到臉書