氟化乙烯 的英文怎麼說

中文拼音 [fúhuàyǐxī]
氟化乙烯 英文
ethylene fluoride
  • 烯 : 名詞[化學] （有機化合物的一類） alkene; olefince
  • 氟化 : [化學] flroration; fluoridize; flrorinate; fluoridate
  1. Fep insulated wire with glass or asbestos braid

    氟化乙烯丙烯絕緣玻璃或石棉編織線
  2. This product had strong property of separation and recovery of organic dissolvent and vapour, such as ether, ketone, alcohol, thf, dichlorotetra, chlorolform, narkosid, carbon disulfide disulphide, carbon, benzol, gasoline oil, etc

    對醚類、酮類、醇類、四氫呋喃、二氯四烷、三氯甲烷、三氯乙烯、二硫化碳、苯、甲苯、甲酰、汽油及含汞、含氟烴類有機溶劑和有機蒸氣有很強的分離、回收性能。
  3. Using bf3 - et2o as a catalyst, the title compound was synthesized from allyl alcohol and epichlorohydrin by a series reaction included addition and cyclization

    烯丙醇和環氧氯丙烷在三氟化硼乙醚絡合物的催化作用下進行加成和環化反應制得標題化合物。
  4. First, rubber sponge balls are mainly synthesized with silicone rubber. in addition, tubular membrane is dominatingly made of polyvinylidene fluoride ( pvdf ) with the integrated production technology and the membrane is tested with self - made leak hunting device

    首先，以硅橡膠為主要原料合成生產了海綿橡膠球；另外，以聚偏氟乙烯（ pvdf ）為主要原料用管式膜一體化技術生產了管式膜，並通過自行設計的檢漏裝置對管式膜進行檢測。
  5. Though costly, polyvinylidene fluoride ( pvdf ) has excellent thermal and chemical stability

    聚偏氟乙烯（ pvdf ）雖然價格昂貴，但熱穩定性和化學穩定性很好。
  6. Stainless steel shaft bearings coated with nickel - reinforced ptfe for perfect stem guiding and smooth closing

    不銹鋼軸軸承外層塗敷鎳強化聚四氟乙烯，用於完善閥桿導向和平滑關閉。
  7. Function of compensation lead cable which used for thermocouple is to prolong cold end of thermocouple, and composing system for measuring temperature by connecting with temperature meter. adopting high - quality import teflon insulation and sheath advanced technologic production chain, makes products owning good performance of resistance to high low temperature acidproof anticorrosive antiaging long - term using in oil, etc. normal working temperature is - 40 275

    熱電偶用補償導線電纜的作用是來延伸熱電偶的冷端，與測溫儀連接構成測溫系統，產品選用進口優質聚四氟乙烯絕緣和護套，並採用先進擠出設備新工藝流水生產線，具有耐高溫低溫，耐酸堿，防腐，耐老化等優異性能，可浸入油水中長期使用，正常工作溫度- 40 275 。
  8. In this article, the bellcore method was used to prepare polymer electrolyte membrane based on pvdf - hfp, and polymer electrolyte membranes under different conditions were prepared by changing sorts of solvents 、 ratio of dbp and solvent. effects of ratio of plasticizer and solvent on the liquid uptake 、 sem 、 mechanism capability 、 ionic conductivity 、 electrochemical stability window of polymer electrolyte membrane were also studied. through optimizing the preparation technics, the integrated effects of additives such as pc 、 ec 、 dbp and nanophase al2o3 on the ionic conductivity 、 liquid uptake were studied

    本文以聚偏氟乙烯-六氟丙烯共聚物pvdf - hfp為基質，採用bellcore制膜法制備了pvdf - hfp聚合物電解質膜，通過改變增塑劑dbp的含量、溶劑的種類及溶劑的含量制備了不同條件下的聚合物電解質膜，分別研究了增塑劑含量、溶劑含量等對聚合物電解質膜的吸液率、表面形貌、機械性能、離子電導率、電化學穩定窗口等的影響;對制備工藝進行了優化，研究了各種添加劑如pc 、 ec 、 dbp及納米al2o3對聚合物電解質膜的離子電導率、吸液率等性能的綜合影響。
  9. Standard specification for copolymers of vinylidene fluoride with other fluorinated monomers

    亞乙烯氟化物與其它氟化物單體的共聚物標準規范
  10. The degrees of crystallinity of pure ptfe under the different conditions of water cooling, air cooling and furnace - varying cooling were made comparison by xrd. the thermal stability of pure ptfe and solid lubricant was analyzed by dsc - tg ; the composition and valence state of elements in the surface of carbon fiber, solid lubricant before and after friction test and lubricant transfer film were characterized by xps ; the frictional property of solid lubricant was tested by pin and disk test rig. the frictional wear property of solid lubricant between embedded bearing sleeve and steel axle friction pair ring was tested by special simulate test machine, the hardness of solid lubricant was tested by pm ; the compression strength of solid lubricant was tested by material test machine

    用sem表徵原料微觀結構、摩擦表面及潤滑轉移膜表面形貌：用xrd進行原料物相分析，及比較水冷卻、空氣冷卻、隨爐冷卻三種工藝條件下的純聚四氟乙烯樹脂的結晶度；用dsc - tg分析純聚四氟乙烯樹脂及固體潤滑劑的熱穩定性；用xps表徵碳纖維表面、固體潤滑劑摩擦前後表面、潤滑轉移膜表面的元素組成、價態變化；用銷盤式摩擦磨損試驗機對固體潤滑劑進行摩擦性能測試；採用專用的臺架模擬試驗機對固體潤滑劑鑲嵌軸承套與鋼軸摩擦副間的摩擦磨損性能進行測定；用萊次偏光顯微鏡（ pm ）測試固體潤滑劑的硬度；用材料試驗機測試固體潤滑劑的抗壓強度等。
  11. After looking up a large amount of native and foreign information, the materials used in the experiment were as follows : ptfe base, graphite filler, molybdenum disulfide filler, copper powder filler, carbon fiber and so on. the experimental method is that the formula was designed according to uniform experimental method, the relationship between formula and frictional property was found with spline function and then the representative test points were chosen from fitting curve to make verification test for optimization. the preparative technique of solid lubricant is cold - press sintering method

    經過查閱大量國內外文獻資料后確定原料為：聚四氟乙烯樹脂為基體，加入石墨、二硫化鉬、銅粉、碳纖維等填料；試驗方法為：根據均勻試驗方法設計配方，用樣條函數找出配方與摩擦性能的關系，然後在擬合曲線上選取具有代表性的試驗點進行驗證試驗，達到優化的目的；制備工藝：冷壓燒結法制備固體潤滑劑。
  12. The results indicated that the dimension, shape and purity of base material could meet the functional demand of solid lubricant ; the thermal decomposition temperature of ptfe resin exceeds 400 c, but organic and inorganic packing filler added in ptfe made the water absorption rate of composite material increased, melting temperature and decomposition temperature decreased, in the meanwhile oxidative decomposition reaction was accompanied ; polar groups such as c = o, c - o - c and so on in the carbon fiber surface is advantageous to increase compatibility with other components and interlayer shearing strength ; uniform design experimental method could help to find the relationship between formula and frictional property by relatively small tests. the developing trend of each formula ' s friction coefficient could be showed by fitting curve ; the friction coefficient with no copper powder or graphite in formula was relatively big. this fact showed that copper powder and graphite should be used cooperatively ; it was found that when the ratio of copper powder to graphite by weight is 15 : 60, 30 : 30 - 40 and 60 : 15 - 30 respectively, the friction coefficient was relatively small. the degree of crystallinity of pure ptfe reached maximum by air cooling and the abrasion loss also reached maximum among three ones ; at the same time, the abrasion loss of solid lubricant sample was also the biggest among three ones ; when solid lubricant matched with 45 # steel axle or gcrl5 steel axle, lubricant transfer film could be formed on metal surface, thus direct contact between the surface of metal friction pair rings was reduced. their working life was elongated extremely ; there was mainly much graphite, a little ptff, moo3, feso4, cus and so on in lubricant transfer film

    試驗結果表明：所選原料的尺寸、形狀及純度可滿足固體潤滑劑的性能要求；聚四氟乙烯樹脂熱分解溫度超過400 ，但在ptfe中加入無機填料會使復合材料吸水率提高，熔融溫度及分解溫度降低，且伴有氧化分解反應；碳纖維表面含有c = o及c - o - c等極性基團，有利於提高其與其它組分的相容性，提高層間剪切強度；均勻設計試驗方法能夠用較少的試驗次數找出配方與摩擦性能間的關系，擬合曲線基本能表示各配方的摩擦系數發展趨勢；配方中不加銅粉或不加石墨，其摩擦系數均較高，說明銅粉和石墨應該配合使用；當銅粉15份、石墨60份時，銅粉30份、石墨30 - 40份時，銅粉60 、石墨15 - 30份時，摩擦系數均具有較低值；純聚四氟乙烯樹脂在空氣冷卻時結晶度最大，磨損量也是三者中最大的；同時，固體潤滑劑試樣在空氣冷卻時的磨損量也是三者中最大的：不論是固體潤滑劑與45 #鋼軸配副或是固體潤滑劑鑲嵌入銅套后與gcr15鋼軸配副，在金屬表面均可形成潤滑轉移膜，從而減少金屬摩擦副表面間的直接接觸，大大延長其使用壽命;轉移膜中主要含有較多的石墨、少量聚四氟乙烯、 moo 。
  13. Opposite nip type line with rubber butterfly valve, metal hard seal eccentric butterfly valve, intensifying polytetrafluoro - ethylene soft ? sealing butterfly valve, low - load light type high temperature butterfly valve, fluorine - butterfly butterfly valve

    對夾式襯膠蝶閥，金屬硬密封偏心蝶閥，強化聚氟乙烯軟密封蝶閥，低負載輕型高溫蝶閥，襯氟蝶閥。
  14. The teflon compensator, may call the corrugated pipe, also called theinflation festival, it may use for to eliminate the pipeline, thevessel either the equipment and so on the expansion and contractionwhich causes because of the climatic change or because otheroriginally thus cause heat expansion or displacement ; as one kind ofslow shaker

    聚四氟乙烯補償器，可稱波紋管，又稱膨脹節，它可用來消除管道、容器或設備等因氣候變化而引起的伸縮或因其他原因而導致的熱膨脹或位移；作為一種緩振器。
  15. Ptfe is widely used in various production and life areas for its unique and indispensable function of insulation, corrosion resistivity, chalk resistance, microwave resistance, self - lubrication

    聚四氟乙烯以其獨特的、無可取代的絕緣、防腐蝕、耐老化、抗微波、自潤滑等優良性能而被廣泛應用於各個生產、生活領域。
  16. Fepb fluorated ethylene - propylene insulated wire with glass or asbestos brai

    氟化乙烯丙烯絕緣玻璃或石棉編織線
  17. Practice shows that rigid pvc equipment can be used under 60 by cooling water ; rigid pvc can be used instead of certain steel devices during the production of fluoride salt

    實際使用情況表明：在氟化鹽生產中，採用淋水冷卻的辦法可以使硬聚氟乙烯設備在高於60的條件下使用；可代替某些鋼制設備。
  18. In order to reduce the membrane ' s cost, we prepared the membrane by simultaneous radiation grafting of styrene onto teflon - polytetrafluorethylene films and subsequent sulfonated by the chlorosulfonic acid introducing the activity sulfonic acid grape into the grafting side chains of the polymer films

    在實驗中採用高能輻射技術，先將苯乙烯單體接枝到聚四氟乙烯聚合物基體上，后經氯磺酸磺化反應引入磺酸基團，合成了滿足燃料電池性能要求的質子交換膜。
  19. Standard specification for fep - fluorocarbon molding and extrusion materials

    Fep氟化乙丙烯模製和壓塑材料的標準規范
  20. Test method for stability of perchloroethylene with copper

    含銅全氟化乙烯穩定性試驗方法
分享友人
分享到 Line

分享到臉書