流動改進劑 的英文怎麼說

中文拼音 [liúdònggǎijìn]
流動改進劑 英文
flow improvers
  • : Ⅰ動1 (液體移動; 流動) flow 2 (移動不定) drift; move; wander 3 (流傳; 傳播) spread 4 (向壞...
  • : Ⅰ動詞1 (改變) change; transform 2 (修改) revise; alter; modify 3 (改正) rectify; correct 4 ...
  • : 進構詞成分。
  • : Ⅰ名詞1 (藥劑; 制劑) a pharmaceutical or other chemical preparation 2 (某些有化學作用的物品) a...
  • 流動 : 1. (液體或氣體移動) flow; run; circulate 2. (經常變換位置) going from place to place; on the move; mobile
  • 改進 : improve; make better; better; mend; improvement; perfection; melioration
  1. Powder materials can be made into even granules customer needs without adding any bonding anent when they run througnh the machine. as density of granules are larger, no any afterward process is needed so as to reduce technological process, reduce granulation cost and powder pollution and improve labor environment as well

    粉體物料經本設備,無需添加任何粘結即可直接製成用戶所需的均勻顆粒產品,顆粒密度大,城無需再行后續加工處理,減少了工藝程,不僅降低了造粒成本,並且減少了粉塵污染,善工人的勞環境。
  2. Tao feng changzhou chemical company located in the jiangsu international plastics city, is in changzhou city, the river additives ltd. and jurong city tao reagent production plant product sales window, the major products : toluene, pure benzene, xylene, n - octanol, ethyl acetate, acetic acid small fat, silicone oil, aniline, poly - succinimide, benzene triazole derivatives, isopropanolamine, ethanolamine, alkylation two aniline, scale inhibitor, promoting agents, antioxidants, ppd, defoamer, metal deactivator, hx - 3308 scale and corrosion inhibitor, hx03 - 12 diesel flow improver, parathion octyl - zinc chloride bridge acid, chlorine bridge anhydride, chlorobenzene, double - dicyclopentadiene, norbornene anhydride

    常州濤峰化工有限公司座落在江蘇國際塑化城,是常州市夏溪助有限公司和句容市龍濤試廠生產的產品的銷售窗口,主要經營產品:甲苯、純苯、二甲苯、辛醇、乙酸乙脂、乙酸丁脂、硅油、二苯胺、雙聚丁二酰亞胺、苯三唑衍生物、異丙醇胺、乙醇胺、烷基二苯胺、防垢、促、抗氧、降凝、消泡、金屬鈍化、 hx - 3308阻垢緩蝕、 hx03 - 12柴油流動改進劑、硫磷丁辛基鋅鹽、氯橋酸、氯橋酸酐、氯苯、雙聚環戊二烯、降冰片烯二酸酐等。
  3. Based on the principles of designs of self - compacting and light aggregate concrete mix, sclc of lc30 - lc50 was developed by using absolute volume method. the main factors affecting the workability of sclc were studied by adopting the modified l - 800 fluidity instrument. the results indicate that the key techniques insuring good workability of sclc are about 30 % first - grade fly ash, about 50 % volume sand ratio, 2 % ~ 6 % dosages of silicon fume and compounded superplasticicizers with viscous ingredient

    採用l - 800儀,研究了影響lc40自密實輕骨料高性能混凝土工作性的主要因素,結果表明:粉煤灰摻量保持30左右,硅灰摻量為2 6 ,體積砂率為50左右和摻加具有粘塑組分的復合高效減水是保證sclc拌合物具有較好工作性的關鍵。
  4. This paper is based on summarizing and analyzing the correlative work. it introduces the speed of the uniform flow closing to the dynamical field in the factual cloud to the answer of the probability equation of the catalyst particle remains in the cloud of nucleation layer, ameliorates the answer of the equation which does n ' t consider the uniform flow evidently

    本論文在總結分析已有相關工作的基礎上,對催化粒子在雲中核化層存留概率方程解中,引入了和實際雲中力場相近的均速度,明顯了過去不考慮均的概率方程解。
  5. The experimental results of the flow characteristics of the mmc heat sink indicate that the critical reynolds number signifying the transition from laminar flow to turbulent flow is in advance ; under the same experimental conditions, the variation in entrance direction of the microchannel inlet and outlet has little effect on the microchannel ; the experimental values of the friction factor of the de - ionized water in a microchannel agree well with those calculated using the theoretical laminar formula ; furthermore, a comparison of the experimental results and simulation results shows that navier - stokes equation and rng - turbulence model can be used to model the laminar and turbulence flow regions in a microchannel ; meanwhile, the correlations of the flow resistance in the turbulent flow regions for the de - ionized water as the working fluids are obtained from experiments

    對歧管式單通道熱沉特性的研究結果表明,微通道內態由層向紊轉變的臨界雷諾數提前;體的出口方向對熱沉總壓降造成的影響很小;摩擦系數的實驗值與理論值較接近;數值模擬結果能夠與實驗值較好吻合;並由實驗給出了紊阻力的實驗關聯式。此外,選用十二烷基硫酸鈉( sodiumdodecylsulphate , sds )以及烷基多糖苷( alkylpolyglycoside , apg )作為減阻添加,研究了表面活性添加對微通道特性的影響。
  6. At the same time, experimental study on boiling heat transfer by changing mass flow of refrigerant, mass flow of water, and inlet temperature of water was also finished. and then the performance of miniature evaporator was estimated

    本文完成了液單相、兩相熱平衡實驗和阻力特性實驗,研究了製冷在管內的壓降;同時行了微型蒸發器沸騰實驗,通過變製冷質量量、水的質量量、水的口溫度等,實現了對微型蒸發器的性能評價。
  7. The properties of cn thin films such as their morphology, component, crystal structure and the bonding structure and the relation between those properties and the gas - phase reaction parameters were discussed, showing that the deposition of p - c3n4 thin film is the compete result of various reaction processes in the dynamics balance conditions ; the process of cn films depo sition is diagnosed in situ through the optical emission spectra technique, the effects of experimental parameters on the concentration of the precursors and the gas - phase reactions in the plasma have been obtained ; the main reaction precursors for film deposition identified ; the relation between the characteristics of cn thin films and the reaction process in the plasma is analyzed. the cn thin films deposition under different substrate temperatures in high pressure pe - pld shows that the si atom of the substrate has participated the cn films growth process, based on this the growth mode of cn thin films on the si substrate is proposed. the further experiment of cn thin films deposition on si substrate scratched by diamond as well as covered with fe catalyzer has been attempted, which indicates that changing the dynamics conditions of the surface reaction can alter the growth characteristic of the cn thin films and can enhance obviously the films growth rate

    採用pld技術行了碳氮化合物薄膜沉積,得到了含氮量為21at的cn薄膜;研究了襯底溫度和反應氣體壓強對薄膜結構特性的影響,給出了cn薄膜中n含量較小、 sp ~ 3鍵合結構成分較少和薄膜中僅含有局域cn晶體的原因;引入脈沖輝光放電等離子體增強pld的氣相反應,給出了提高薄膜晶態sp ~ 3鍵合結構成分和薄膜的含n量可行性途徑;應用pe - cvd技術以ch _ 4 + n _ 2為反應氣體並引入輔助氣體h _ 2 ,得到了含n量為56at的晶態cn薄膜;探討了cn薄膜形貌、成分、晶體結構、價鍵狀態等特性及其與氣體壓強和放電電的關系,證明了- c _ 3n _ 4薄膜沉積為滿足力學平衡條件的各種反應過程的競爭結果;採用光學發射譜技術對cn薄膜生長過程行了實時診斷,得到了實驗參量對等離子體中活性粒子相對濃度和氣相反應過程的影響規律,給出了cn薄膜沉積的主要反應前驅物,揭示了cn薄膜特性和等離子體內反應過程之間的聯系;採用高氣壓pe - pld技術研究了不同襯底溫度條件下cn化合物薄膜的結構特性,揭示了si原子對薄膜生長過程的影響,給出了si基表面碳氮薄膜的生長模式;在金剛石研磨和催化fe處理的si襯底上行cn薄膜沉積,證明了通過控制材料表面力學條件可以變碳氮薄膜結構特性,並可顯著提高晶態碳氮材料的生長速率。
  8. Lofi lubricant oil flow improver

    潤滑油流動改進劑
  9. According to the production practice to produced - 35 ( superscript # ) diesel fuels with added low temperature fluidity improver through the years, the effect of the different low freezing diesel composition on susceptibility of low temperature fluidity improver are described, and their mechanism is discussed

    摘要根據多年來採用加入低溫生產- 35號低凝柴油的生產實踐,闡述了不同的柴油組分對柴油低溫感受性的影響,並對其原理行了探討。
  10. In this paper. flow properties of multistage fluidized - bed bioreactor with external circulation at a pilot scale is studied. according to characteristic analysis, the model of completely mixing reactor in series is introduced to characterize real reactor as a theoretical model. on the basis of analog computing analysis and discussion of theoretical model. by means of pulse tracer method, experiments on residence time distribution ( rtd ) have been done in different conditions including the change of tracer level, feeding flow rate and circulation flow rate. the result shows when the ratio of circulation flow rate and feeding flow rate amounts to at least 4, the flow properties of multistage fluidized - bed bioreactor with external circulation at a pilot scale is very close to the model of completely mixing reactor in series. an amendatory model has been established by the regression method

    作者首先在對反應器行特徵分析的基礎上,建立了描述中試規模多級外循環化床生物反應器特性的串級全混模型,並對理論模型行了模擬計算分析和討論,在此基礎上,作者分別在無循環和有循環(變示蹤用量、量和循環量)的條件下,利用脈沖示蹤法對一到五級串聯外循環化床反應器行了停留時間分佈實驗,結果表明,在循環量與量的比值達到大於等於4時,中試規模多級外循環化床反應器的特性接近串級全混模型,通過數據回歸擬合的方法,建立了中試規模一到五級串聯外循環化床反應器的模型。
  11. To improve the performance of ashp, an improved ashp system is presented. different from the original system, the new one can control the refrigerant flow rate by the sub - cooling of condenser and adjust the sup - heating of the compressor inlet vapor by the heater in accumulator. the simulation shows the new system not only has better dynamic characteristic of frost and defrost of ashp, but also has higher coefficient of performance

    善空氣源熱泵機組的結霜除霜態性能,提出了一種利用冷凝器過冷度來調節製冷量,在氣液分離器里增加電熱裝置保持壓縮機口過熱度的型系統,結果表明這種型系統不但可以善系統的運行性能,同時能善系統運行的經濟性,為機組的技術升級和產品更新提供了一個新的途徑。
  12. The reasons for higher oxidizer flow rate, lower fuel regression rate and lower motor performance in both hot firings are discussed. several necessary improvements for the test system are suggested. 6

    通過對兩臺發機試驗結果的分析,找出了試驗中氧化量偏高、燃料退移速率和發機性能偏低的原因,並提出了具體的措施。
  13. Alkaline zinc - manganese battery is widely used all over the world it has good performance of storage , low cost , stable discharge and convenience of carrying the sealing of the battery is a crucial factor to the performance of the battery due to the disadvantages of present sealants , leakage of electrolyte often happens what ’ s more , the sealing capability affects the performance of the battery the way to raise the sealing capability is to search for a good additive , which can improve the sealing capability through adding according to chemical principles , this article picks out ptfe and nylon66 as additive adding ptfe or nylon66 into the pitch can improve the sealing capability of the pitch at the same time , the temperature , the time , the amount of addictive , the way to drop temperature and the time of churning all should be considered by testing the constitutions , softening point , moving degree and length of needle of various pitch samples , we can compare the properties of different sealants can be studied by using of x - ray, the constitutions of the pitch can be indicated which can help us to explain these changes this article includes : testing the constitutions , soften point , moving viscosity and needle penetration of various pitches ; raising the sealing capability by adding ptfe nylon66 into the pitches ; testing the constitutions , soften point , moving viscosity and needle penetration of raised samples ; analyzing and discussing the basic principles of this method it is showed that soften point , moving viscosity and needle penetration of pitches are increased by adding ptfe nylon66 and the discharge time , initial voltage , capacity of battery with pitch raised by nylon66 are good and get to the requirement of gb t7 1 1 2 in a11 the method proposed in this article is available in practical industry use

    通過測定瀝青的軟化點、運粘度和針入度等指標參數來比較不同的添加及不同的添加條件對瀝青封口性能的影響。本論文的主要研究結果為:系統測試了多種瀝青樣品的組成、軟化點、運粘度、針入度;對市售瀝青分別添加聚四氟乙烯乳液、有機硅樹脂和尼龍66,制備了產品;對瀝青的組成、軟化點、運粘度、針入度行了測試和比較;使用瀝青組裝成電池並對電池行恆電放電測試、短路電測試和電池漏氣、漏液性能的測試;對瀝青的原理行了分析和討論。實驗結果表明:在瀝青中添加尼龍66和聚四氟乙烯乳液對瀝青的封口性能有明顯的提高;通過對工藝條件的不斷,目前的工藝條件已完全可以用於實際生產操作;以添加尼龍66的瀝青為封口組裝成的電池完全滿足堿錳電池生產的需要,且電池電容量、短路電等指標均達到gb t7112標準要求;本文提出的方案,通過驗證是一種效果好、實用性強的方法。
分享友人