流形系數 的英文怎麼說

中文拼音 [liúxíngxìshǔ]
流形系數 英文
flow shape factor
  • 流 : Ⅰ動1 （液體移動; 流動） flow 2 （移動不定） drift; move; wander 3 （流傳; 傳播） spread 4 （向壞...
  • 系 : 系動詞（打結; 扣） tie; fasten; do up; button up
  • 數 : 數副詞（屢次） frequently; repeatedly
  • 系數 : [數學] coefficient; ratio; modulus; quotient; factor
  1. In conclusion, it is primarily described that the expectable social and economical benefits of this mis are great, and the design can be fulfilled smoothly. the difficulty of this thesis is : not only think about the coordination each other synthetically on workers, equipments, technologies, data and user ' s priorities, different project and different continuation day, but also must ensure that it is agility, controllable and safe when the data be transmitted on internet or intranet

    本管理信息系統強調是針對無形的數據信息產品（ gis等海量數據）的生產管理信息系統，不是單純的統計計算，還要實施嚴密的控制，除需要綜合考慮人員、設備、技能技術、權限、工程、工期在計劃調度統計方面的協調性外，還需要強調海量數據信息產品的原始數據、半成品、成品在網路上流動的靈活性、可控制性和安全性。
  2. Based on the relative independence of mathematical cover and physical grid, and considering the action of truely existent various equilibrant force in system for system balance, a method of simulation for excavation unloading using numerical manifold method in geotechnical engineering is proposed

    摘要基於數值流形方法數學覆蓋與物理網格的相對獨立性，考慮任一時刻體系中真實存在的各平衡力項對體系平衡的作用，提出用數值流形方法模擬巖土工程開挖卸荷的方法。
  3. The paper described the building process of model that can identify the shock - absorber parameter of landing gear and at the same times optimize performance of system. in this paper, there are also some debate, it include identifying parameter which can not be measured, such as the air polytropic exponent and the orifice discharge coefficient of shock - absorber

    本文利用復合形優化演算法建立了起落架緩沖系統參數識別與系統優化模型，對緩沖器空氣壓縮多變指數和油孔流量系數等不可測參數的識別和著陸、滑跑載荷多目標優化問題進行了討論。
  4. Specially, based on risk - metric and factor variables, the author discusses multi - factor asset pricing model. in theoretical analysis, the author attempts to release the assumption of index ' s random walk, proves a portfolio selection model suitable for the linear index level moreover, based on assets un - exchangeable, the author brings forward asset pricing models for b - shares, h - shares and non - circulated - shares. the author also brings forward multi - factor asset pricing model based on risk - metric indices, such as coefficient of beta, standard variance, standard semi - variance, average absolute deviation, value at risk, and factor variables, such as circulated market equity, exchange ratio, short - term historical return

    在理論分析時，作者嘗試放鬆指數水平滿足隨機遊走過程的假設，推導出指數水平呈線性趨勢的資產組合選擇模型；此外，作者基於資產不可交易這一假設，提出了b股、 h股和非流通股等情形的資產定價模型，並基於系數、標準差、標準半方差、平均絕對離差和風險價值等風險度量指標以及流通市值、換手率、短期歷史收益率等因素變量提出了四因素資產定價模型。
  5. Then the judging method is proposed, and the proposed method can consider the stress history and viscosity shear strength of soft soil. in this paper, a fem program dpfbm1. 0 ( double plastic foundation beam method ( version 1. 0 ) ) is established. with this program, the influence of some parameters on foundation excavation is fully studied, the parameters include : compression modulus, cohesive strength, angle of internal ficiction, effective angle of internal friction, the embedded length of the wall and building load

    針對當前國內外彈性地基梁法存在的缺陷，基於對軟土流變性的研究，採取了剪應力判斷彈塑性狀態，以改進和完善基坑工程彈性地基梁法，推導了彈性狀態下地基反力系數的近似解，提出了採用剪應力組合判斷土彈簧彈塑性狀態的方法，編制了相應的彈塑性共同變形法分析程序dpfbm1 . 0 （ doubleplasticfoundationbeammethod （ version1 . 0 ） ） ，並採用該程序分析了壓縮模量、粘聚力、內摩擦角等參數變化對基坑工程的影響。
  6. In this paper we study the single - species chemostat model with time dilay. based on [ 8 ], we analyze the hopf bifurcation of the system which take the diluton as a parameter, and we obtain that under the conditon of the existence of positive equilibrium and if the dilution is too big or too small, the system will appear hopf bifurcation

    在文[ 8 ]的基礎上，以模型中的流量為參數進行了hopf分支分析。得出了在正平衡點存在的條件下，當流量較大或較小時，系統的正平衡點附近會產生hopf分支，並應用中心流形和規范形理論給出了分支方向及分支周期解穩定性的計算公式。
  7. In chapter four, according to the analysis on the boundary theory and velocity field of main fluid zone of two - phase fluid pumps, the parameter equations of vane ' s modular curve of centrifugal pump are given, which contact the boundary " layer and eular theory of two - phase fluid pump by the fixing angel of vane as variable and leading into the velocity coefficient a. the results show that, in designing process of vane ' s modular curve of centrifugal pump, the determination of the total shape and parameters relates the flow properties of two - phase fluid and output ability of pump, or the design of the modular curve of centrifugal pump is the kernel of hydraulic design

    第四章依據固液兩相流泵的邊界層理論及對主流區速度場的分析，給出了離心泵葉片型線的參數方程；它是以葉片安裝角為參變數，以引入的速度系數k _ v作為中間因子，將兩相流泵的邊界層理論和歐拉理論聯系起來? ?它說明了這樣一個事實，在離心泵葉片型線的設計過程中，它的整個形態或參數的確定都關繫到兩相流體的流動特性和泵的輸出能力，或者說，離心泵型線的設計是其水力設計的核心。
  8. When catchment area, average channel gradient and catchment shape factor of designed culvert or bridge are known, a user can be convenient to get local parameters c, e and b from standard contour charts and easy to calculate flood flow just by a calculator. design period of flood flow is enormously shortened as well as a high precision. estimated flood flow through culvert or small bridge by new calculation model is generally less than by traditional methods, so that much cost is cut down a s reducing the span of culvert or small bridge

    以75000km ~ 2的川中丘陵地區為試點研究區，繪制了該地區新模型的參數等值線圖，率定了不同設計頻率的改正系數，使設計者只需在地形圖上獲取集水面積，河道平均坡降和流域形狀系數，在參數等值線圖上查得橋涵所在地的相應參數，使用計算器即可迅速計算出設計流量，大大縮短了設計周期，且精度較高，設計的洪水流量一般低於傳統方法，從而可減小橋涵跨徑，節省投資。
  9. We first set up the hiberarchy of the nmm ’ s visualization and focus on the study of pem ’ s visual process. then the coupling equation of pem is deduced and a rapid algorithm for solutions of bordered tridiagonal linear equations is put forward. in the last of the thesis, elementary system of deformation geometry unified for manifold ’ s structure is studied primarily via the idea of unified modeling and some theoretic results for analytical visualization are given out under the system of frenet frame of arbitrary parameters

    文章結合nmm的基本原理和特點，研究了nmm可視化的有關理論和方法;文章首先建立了nmm可視化的層次結構，重點對面素單元法（ pem ）的可視化過程進行了細致研究，推導出了pem的耦合方程，然後給出加邊三對角方程組的一種快速求解演算法，最後還從統一建模的思想對統一于流形結構變形幾何的基本體系進行了初步研究，得到了任意參數形式下frenet標架體系的若干適用於解析可視化的理論結果。
  10. The effects of the fabrication conditions on the crystal structure, grain size, micromorphology and electrochemical performance of these materials have been studied in depth. the reaction mechanism of the low - heating solid - state reaction method has also been investigated. in addition, a novel electrochemical method ( rpg method ) based on the concept of " ratio of potentio - galvano - charge capacity " has been for the first time developed to determine the diffusion coefficient of lithium - ion within insertion - host materials on the basis of the spherical diffusion model

    本論文較系統地考察了低熱固相反應法合成鋰離子電池正極材料的可行性問題，研究了工藝條件對材料的晶體結構、晶粒尺寸、微觀形貌及電化學性能等的影響，探討了低熱固相反應的機理，並通過引進「恆壓-恆流充電容量比」的概念，給出了一種測定鋰離子嵌入脫出固相擴散系數的新方法。
  11. The main work is done with the help of model experiment. in the flood - relief experiment, the flood carrying capacity of spillway tunnel is checked. in the hydraulic experiment of the diversion power conduit system, the followings are studied : the flow condition and fluctuation in the surge chamber, the distribution of flow velocity before the rack in the surge shaft, the amplitude of stage in the quick gate bay etc. the test step, content and results of different proposals are introduced in details

    本項優化試驗研究的目的主要在於，通過泄洪系統整體水力學試驗，校核泄洪洞的泄流能力；通過發電引水系統整體水力學試驗，研究調壓井內水流流態和水位波動情況、調壓井內攔污柵前流速分佈情況；確定快速閘門井內水位波動幅度；試驗確定壓力管道水擊壓力穿井系數以及泄洪洞弧形門處的水壓力。
  12. In the part of orbit control, the main ideas in study is to define the nonlinear control system on a riemann manifold from the global viewpoint, and to build the intimate relation between the geometrical structure of state space and the state equation of nonlinear control system ; in the part of attitude control, the main ideas in study is to deduce mathematical model with good character based on global differential geometry ideas as well as li group and li algebra, moreover, to design corresponding control schemes

    在軌道控制部分，研究的主要思想是從整體化的觀點出發定義一種建立在riemann流形上的非線性控制系統，將狀態空間的幾何結構與控制系統的狀態方程建立直接的聯系。在姿態控制部分，研究的主要思想是以整體微分幾何方法為工具，以李群與李代數等數學理論為基礎，從數學角度建立具有良好性能的數學模型，並設計出相應的控制方法。
  13. Xquery is designed to work just as well accessing legacy data stores such as relational and object databases, and the resulting abstraction and complexity gives it a very different feel from that of popular xml repositories, which are often just collections of xml as plain files or in simple hash databases

    Xquery的設計考慮了訪問關系數據庫和對象數據庫這類遺留數據存儲，結果其抽象性和復雜性使其完全不同於流行的xml存儲庫，後者常常是純文本或者簡單的散列數據庫形式的xml集合。
  14. Deposits of foreign materials will change the sharp contours which govern its coefficient of discharge.

    雜質的淤積會改變決定流量系數的輪廓形狀。
  15. At the same time, when the thickness - diameter ratio was larger than 1, it has little influence on the discharge coefficient for the hole configuration, but when the thickness - diameter ratio was less than 1, the discharge coefficient of the hole with across arrangement is higher than that with sequence arrangement

    同時，在氣膜孔厚徑比大於1時，氣膜孔的排列形式對流量系數的影響不大，當厚徑比小於1時，叉排氣膜孔的流量系數要高於順排氣膜孔的流量系數。
  16. The measurements of discharge coefficients and pressure coefficients along the models with aspect ratios of 0. 5, 1. 0 and 2. 0 were carried out under various aerodynamic and geometric parameters ( reynolds numbers : 20000, 40000, 60000, 80000 ; suction rates : 0. 3, 0. 45 and 0. 6 ; rib angles : 45, 60, 90, 120 ; rib height - to - width ratio h / e : 1. 0 and 2. 0 ; film hole location : middle of ribs. upstream of ribs and downstream of ribs ). based on the abundant experimental data and figures, rules of discharge coefficients and pressure coefficients in dependence of geometric and aerodynamic parameters were given out

    根據實驗課題的要求，在寬高比分別為1 . 0 、 2 . 0和0 . 5的內流冷卻通道里，在不同的氣動和幾何參數（雷諾數re分別為20000 、 40000 、 60000 、 80000 ，出流比sr為0 . 3 、 0 . 45和0 . 6 ，肋角分別為45 、 60 、 90 、 120 ，肋高h e分別為1 . 0和2 . 0 ，孔位分別為肋中間、肋下游和肋上游）的情況下，對流量系數和壓力系數以及流場進行了實驗研究，獲得了大量的實驗數據和圖形，較為詳細地給出了流量系數和壓力系數隨不同氣動參數和幾何參數而變化的規律。
  17. On the other hand, the hydraulic performance of the hole, including flow rate coefficient and uniformity of flow rate, have been tested as standards to evaluate the quality of holes punched by laser drilling machine with much better results than that punched by mechanical drilling machine. the shape of holes taken by a microscope photograph can also give detail and well explanations for this test results

    對噴孔水力學性能的試驗研究表明，本文提出的用噴孔水力學性能指標（流量系數和流量變異系數）來評價微噴帶激光打孔機質量的方法是可行的，並證明微噴帶激光打孔機的質量明顯優于機械打孔的質量，用顯微鏡觀察噴孔的形狀的照片也同樣證明了這一點。
  18. ( 6 ) 3d integer model of spillway and frusta of brake are established and numerical computation of 3d viscous flow over spillway is completed. the influence of frusta of brake for design parameters such as shape of free surface, pressure on dam, flux coefficient is computed aim at type of frusta of brake and disposal on dam and compute result of different type of frusta and disposal model is compared

    6 ）通過建立溢流壩和閘墩的三維整體模型，完成了對三維過壩水流粘流場的數值計算，針對閘墩的型式及在壩面的布置計算了閘墩對水面線形狀、壩面壓力、流量系數等設計參數的影響，並將不同墩型與布置形式的計算結果進行比較。
  19. At the meantime, the rock mass may alternate between loading and unloading and it exists in certain kind of liquid, such as surface water, unconfined water, confined water etc for its intrinsic crannies. the practical rock mass concerned project must solve the key stability pr oblem after the understanding of the complicated mechanical characteristic and the deformation trends to guide the following project design and construction for the demand of security, economy, feasibility and validity. however, the intrinsic nonlinearness and complexity of the engineering rock mass become the main difficulty to predict the stability and deformation, the corresponding structure design must ensure enough safety with all the determinate or random force combination, so a model without the geometry distortion and constitutive equation warp is necessary to be built for the quantificational analysis of practical structure ' s stress, for the simulation of the real process and for the determinate evaluation system and optimization

    由於實際工程巖體其固有的非線性和復雜性，使得求解對應的諸如其穩定性、變形等問題面臨較大的困難，而有關的工程結構的設計必須保證該結構在外來因素的作用下具有足夠的安全度、經濟性和合理性，這必然要求對巖體及其工程結構的受力與變形有一套量化評判體系和優化技術，抓住實際工程問題的本質特徵並建立可行的符合幾何模擬、本構模擬、受力模擬、過程模擬四原則的求解模型，通過該模型的數值模擬成果來指導巖體工程的設計、施工及運營、管理；而巖體結構面的存在使得基於傳統連續介質力學理論的理論分析和數值模擬面臨巨大的挑戰，物理模擬的試驗周期和成本也大大增加，而巖土體工程問題則成為典型的數據有限、了解程度有限類問題，這類問題的解決需要綜合應用理論分析、經驗判斷、物理模擬和數值模擬等方法，數值模擬可以完成目前許多技術手段無法完成的實驗，如參數控制，復雜條件下的邊界條件的處理，同時數值模擬具有高可重復性，且數值模擬的成本和人力開銷等遠低於物理模擬，因此研究巖土體工程問題的流形元數值模擬方法是一項具有理論和實際工程應用價值的重要課題。
  20. Taking the hydrostatic equilibrium of axial force of pump dm360 as the example, this paper elaborates design calculation and dynamic - static characteristic analysis of hydrostatic bearing with twisting plate throttle, derives design parameters and formulas of bearing structure, discusses effects of various main factors ( oil viscosity, compressibility, distortion coefficient of twisting plate, pressure of oil source, and bearing clearance ) on dynamic characteristic, and obtains some conclusions about the application of hydrostatic bearing in engineering practice

    本文以dm360型泵軸向力的液體靜壓支承平衡為例，對扭板節流靜壓支承的設計計算和動靜態特性分析進行了較為詳盡的闡述，推導出支承結構的設計參數和公式，討論了各種主要因素（油液的粘度、油液的可壓縮性、扭板變形系數、供油壓力、支承間隙）對支承動態特性的影響，給出了一些結論。
分享友人
分享到 Line

分享到臉書