焊接鋼梁 的英文怎麼說

中文拼音 [hànjiēgāngliáng]
焊接鋼梁 英文
welded steel beam
  • 焊 : 動詞（用熔化的金屬修補金屬器物或使金屬工件連接起來） weld; solder
  • 接 : Ⅰ動詞1 （靠近;接觸） come into contact with; come close to 2 （連接; 使連接） connect; join; put ...
  • 鋼 : 鋼名詞（鐵和碳的合金） steel
  • 梁 : 名詞1 （屋架中架在柱子上的長木） beam 2 （通常也指檁） purlin 3 （橋） bridge4 （物體中間條狀隆起...
  • 焊接 : weld; welding; soldering; seal; sealing; sealing-in; shutting together
  1. The main frame is welded structural steel to which are bolted the channel iron lift support beams

    主要框架是焊接結構鋼，其中以螺栓渠道鐵升降機來固定橫梁。
  2. In addition to, the fatigue crack between web and upper flange of welded steel crane beam on heavy duty service was discussed, and based on long - term observation and research, the author classified fatigue crack into bearing type and middle type crack along the horizontal direction. the causation, distributive law and mechanism of the crack were analyzed, and the precautions to take and the measures to remedy crack were presented. the main defacts including damage, crack, erosion and aging in structures, especially in concrete structure were introduced ; the defact mechanism was analyzed and the precautions to take were also given

    另外，作者對重級工作制焊接鋼吊車梁腹板與上翼緣連接焊縫的縱向水平疲勞裂縫進行了長期的觀察和研究，根據疲勞裂縫產生的不同機理，將其分為支點裂縫和肋間裂縫，並討論了兩類裂縫產生的原因、分佈規律、機理以及防治的措施；對工程中經常遇到的結構構件，尤其混凝土構件的幾種主要病害（損傷、裂縫、腐蝕與老化）進行了機理分析並提出了防治措施。
  3. The system is composed with concrete filled cold - formed square steel tube column, the beam with two cold formed c type steel welded together back to back, the slab with profiled - steel and concrete, the beam and the slab joined into composite steel - concrete beam. they all together make up of the bearing members. and the house also includes the light economical - energy sources heatproof walls

    該體系是以冷彎薄壁方鋼管混凝土為柱、冷彎薄壁c型鋼背靠背高頻焊接組成工字型梁、壓型鋼板上現澆築混凝土組成組合樓板並與梁一起構成組合梁作為承重構件，以輕質節能保溫型墻體作為圍護結構組成。
  4. The steel construction is made up of roof beam, post, purlin, roofing and wall, adopt the automatic production line to weld and take shape in the factory, construction site spend high - strength bolted joint reduce weld work load, make progress and quality receive the complete assurance

    鋼結構由梁、柱、檁條、屋面和墻體組成，工廠內採用自動化生產線焊接成形，施工現場用高強螺栓連接，減少了焊接工作量，使進度和質量得到完全保證。
  5. Presently it is widely used in ship building, bridges, high - rise building etc steel structure welding

    目前已廣泛應用在造船業、橋梁、高層建築等鋼結構的焊接中。
  6. In this thesis, four types of steel beam - rectangular cfst column connections, including normal welded flange plate ( wfp ) connection, bolted flange plate ( bfp ) connection, stiffened end plate ( sep ) connection and double split - tee plate ( dst ) connection, were designed based on the configuration of steel frame connection. total 8 models, 2 models of each kind of connections were tested under low - reversed cyclic loading at the end of cfst columns. the relationships between force and displacement at the end of columns, the relationships between the moment and rotation of the joints, degradations of strength and stiffness, ductility, failure mechanism and failure characteristics of these four connections under different axial - compression ratios were presented

    本文借鑒鋼框架節點構造，設計了四種類型矩形鋼管混凝土柱與鋼梁連接節點，包括常規栓焊（ wfp ）節點、翼緣全螺栓連接（ bfp ）節點、雙t板連接（ dst ）節點以及加勁端板連接（ sep ）節點，進行了四類節點8個模型試件在柱端低周反復荷載作用下的抗震性能試驗研究，比較了不同軸壓比下節點的滯回性能、強度與剛度退化、延性、破壞機理與破壞特徵，主要結論有： 1 、節點的位移滯回曲線與轉角滯回曲線為塊型分佈，沒有或略有捏攏現象，耗能能力強； 2 、軸壓比對節點滯回曲線有顯著影響，全部節點都有顯著的剛度退化； 3 、位移與轉角骨架曲線在峰值荷載後有較長的水平或下降段，具有良好的延性性能； 4 、從整體抗震性能上看，翼緣全螺栓連接節點、雙t板連接與加勁端板連接節點都優于常規栓焊節點，可在實際工程中加以推廣。
  7. Ceramic welding backups are used for one - sided welding of steel and aluminum alloy with any thickness, instead of two sided welding in shipbuilding industry, marine industry, and heavy mechanical industry. the products are stuitable for the most kinds of welding process such as gmaw, saw, fcaw and seg even with high electric current to produce a satisfactory back bead formation

    陶瓷焊接墊是用作鋼鐵或鋁合金單面焊雙面成型的支撐件，可替代效率低下的雙面焊工藝，被廣泛應用於造船，橋梁和重型機械等工業領域的各種焊接（ gmaw ， saw ， fcaw和seg ）甚至高電流場合
  8. And it investigates the appearance condition ( including joint, crack, eroding, corrosion, braking pole device rupture, crane - girder ' s gnawing railway and so on ) of the whole crane - girder system on the spot, at the same time, it also actually examines the stress of the beam, chemical ingredient, distortion and railway excursion, etc. through sampling, and based on the actually examined results, it checks and calculates the carrying capacity of crane - girder system. then, based on the investigating on the spot and the calculated result, it discusses the mechanism of fatigue failure of the upper part of welded steel crane - girder, analyses the reason of steel crane - girder in the high - frequency emerging the fatigue crack, institutes the strengthened method of damaged steel crane - girder of accurate packing up workshop of the primary mill plant. finally, it presents some advice and suggestions for the repairing and strengthening method of fatigue crack of upper part of steel crane - girder in the high - frequency

    針對包鋼初軋廠精整車間鋼吊車樑上部區域出現裂縫這一問題，本文首先綜述了國內外關于焊接鋼吊車樑上部區域疲勞裂縫的研究現狀；其次對整個吊車梁系統的外觀情況（包括連接、裂縫、腐蝕、銹蝕、制動桿件斷裂、吊車啃軌等）進行了現場調查，抽樣實測了梁的應力、化學成分、變形及軌道偏移等，根據實測結果，對吊車梁系統的承載能力進行了驗算；然後，根據現場調查及計算結果，探討了焊接鋼吊車樑上部區域疲勞破壞的機理，分析了重級工作制鋼吊車梁出現疲勞裂縫的原因，制定了初軋廠精整車間破損鋼吊車梁的加固方案；最後就重級工作制鋼吊車樑上部區域出現疲勞裂縫的修復與加固方案提出了一些意見和建議。
  9. Stumps were inserted and welded between the two straddles so that the girders become an integrated arched girder

    變異拱高低跨連接處採用短柱焊接，形成一個完整的鋼拱梁。
  10. What welding methods do you use in connecting the plates, frames, and beams

    在焊接鋼板，肋骨，甲板橫梁時，你們用什麼焊接方法？
  11. Relatively little experimental studies are available on the ultimate strength of curved beams, 18 simple - supported welded beams subjected to a concentrated force at the mid - span are tested

    針對目前曲梁承載力方面的試驗資料比較缺乏，進行了18根焊接工字形水平鋼曲梁的極限承載力試驗。
  12. The system can simulate welding expert to help technicians to complete procedure parameter design, set down wps and save them. besides the mechanical property and chemical composition of low carbon & low alloy steel, the weldabiliry and the defect forming analysis of them have been given in the system. furthermore, the estimation of welding cost and welding procedure files management can be accomplished

    系統能模擬焊接領域專家輔助設計人員進行焊接工藝參數的設計，編制出wps並保存文件；能進行簡單的焊接成本估算；能實現鐵路、橋梁及其它鋼結構生產中常用的低碳及低合金鋼及其焊接材料的力學性能和化學成分的查詢；能進行母材焊接工藝性以及常見焊縫缺陷成因分析與對策等的咨詢；能對各工藝文件進行有效的管理，包括對圖片的管理，能實現簡便地查詢、靈活地調用等。
  13. Safe - fracture applicability of 14mnnbq steel for welded steel bridge components

    鋼用於焊接橋梁的防斷適用性
  14. The overhead traveling crane used at a cold strip mill factory is given to study the deformation, stress distribution and load capacity of the main girder with 3d - fea shell - to - solid submodel method

    以某冷軋帶鋼廠橋式起重機偏軌箱形梁為例，採用三維有限元法「板到體子模型」技術，比較分析了加強板2種焊接方式下主梁的變形、應力分佈和承載能力。
  15. Remarkable electricity consumption saving, especially suitable for welding of large - scale steel structure ( bridge, pipeline etc )

    節電優勢特別明顯，特別適用於大型鋼構工程（如橋梁，管道）等厚大鋼結構高性能焊接工藝
  16. Welded steel girder

    焊接鋼梁52
  17. The stress fields in misaligned welded joints, " t " type of plate welded joint, flanged beam and perpendicular flanged beam are calculated respectively, and their stress concentration factors formulation are obtained

    採用這兩類單元計算了錯位板接頭、 t型板接頭、工字梁焊接鋼結構和工字梁十字接頭的應力場，得到了相應的理論應力集中系數公式。
  18. Four groups of eight types of connection methods are suggested to be able to use for the joint of cold - formed rectangular tube - steel column and h - shaped beam by investigating the current research on the beam - to - column connection methods used at home and abroad, at the same time, a new type of connection is proposed in this article

    本文在對國內外冷彎矩形鋼管與焊接箱形鋼管節點型式研究的基礎上總結出四類八種適合於冷彎矩形鋼管柱與h型鋼梁連接的節點型式，並提出一種新型節點連接型式，分別給出了相關的設計規定和使用條件。
  19. Using the software of ansys, this thesis compares and analyzes the seismic behavior of the joint of cold - formed rectangular tube - steel column and h - shaped beam and the joint of welding box column and h - shaped beam, in order to research the influence for the cold forming process of the cold - formed rectangular tube - steel column

    利用大型通用有限元分析軟體，對冷彎矩形鋼管柱與h型鋼梁連接節點與焊接箱形鋼管柱與h型鋼梁連接節點的抗震性能進行對比分析，探討出冷彎矩形鋼管的特性對節點抗震性能的影響。
  20. The optimization problem of parameters, example hourglass coefficient, mesh size, jointing simulation and so on, which affect the result of crash simulation, is solved. the size and number projects of steel panel and square column, which make deceleration curve of sled reach the requirement, are found by simulation

    模擬分析研究成功地解決了影響碰撞模擬結果的「砂漏」系數、網格大小、焊接模擬參數等各種相關參數的優化處理問題，為臺車碰撞試驗中得到符合要求的臺車減速度曲線提供了鋼板或方形梁的最佳尺寸及組合方案。
分享友人
分享到 Line

分享到臉書