熔劑石 的英文怎麼說

中文拼音 [róngjìdàn]
熔劑石 英文
flux stone
  • 熔 : 動詞（熔化） melt; fuse; smelt
  • 劑 : Ⅰ名詞1 （藥劑; 制劑） a pharmaceutical or other chemical preparation 2 （某些有化學作用的物品） a...
  • 石 : 石量詞（容量單位, 十斗為一石） dan, a unit of dry measure for grain （= l00 sheng）
  1. The technical requirements for the lost pattern made from the paraffin - stearin and the shell mould made from colloidal silica in the precision casting were introduced

    摘要介紹用石蠟硬脂酸低溫模料製作熔模，用硅溶膠作粘結劑製造模殼的工藝。
  2. C. application : it is used in making glassware - plate glass, wired glass, figured glass, hollow glass, foam glass and glass block as beer bottle, cups, vacuum flask, optical glass, fiberglass and so forth. its application is common in founding, smelting, fireproof material, cement and chemical industry

    用途：製造玻璃，耐火材料，冶煉矽鐵，冶金熔劑，陶瓷，研磨材料，鑄造，石英在建築中利用其有很強的抗酸性介質浸蝕能力，用來制取耐酸混凝土及耐酸砂漿。
  3. " ubridge brand " marble mostly to use in slagging powder with drug cover welding electrode. improve slag basicity, steady arc, increase surface strain. it also used on architecture industry

    粵橋牌大理石粉為白色或淺灰色礦粉，主要用於藥皮焊條等焊接材料的造渣造氣劑，可提高熔渣堿度穩
  4. Synthetic cryolites is mainly used as the flux in the aluminium electrolysing and the fillers of rubber, grinding wheel, the milk whiter agent of enamel glass - shaded and the flux of the non - iron metal, etc. its merits are adjustable molecular ratio, lower cost and good fluidity

    人造冰晶石可作電解氧化鋁的助熔劑，橡膠，砂輪的填充劑，搪瓷玻璃罩的增白劑及非鐵金屬的助溶劑等，它具有可調整的克分子傳導率，成本低，流動性好等優點
  5. The results indicated that the dimension, shape and purity of base material could meet the functional demand of solid lubricant ; the thermal decomposition temperature of ptfe resin exceeds 400 c, but organic and inorganic packing filler added in ptfe made the water absorption rate of composite material increased, melting temperature and decomposition temperature decreased, in the meanwhile oxidative decomposition reaction was accompanied ; polar groups such as c = o, c - o - c and so on in the carbon fiber surface is advantageous to increase compatibility with other components and interlayer shearing strength ; uniform design experimental method could help to find the relationship between formula and frictional property by relatively small tests. the developing trend of each formula ' s friction coefficient could be showed by fitting curve ; the friction coefficient with no copper powder or graphite in formula was relatively big. this fact showed that copper powder and graphite should be used cooperatively ; it was found that when the ratio of copper powder to graphite by weight is 15 : 60, 30 : 30 - 40 and 60 : 15 - 30 respectively, the friction coefficient was relatively small. the degree of crystallinity of pure ptfe reached maximum by air cooling and the abrasion loss also reached maximum among three ones ; at the same time, the abrasion loss of solid lubricant sample was also the biggest among three ones ; when solid lubricant matched with 45 # steel axle or gcrl5 steel axle, lubricant transfer film could be formed on metal surface, thus direct contact between the surface of metal friction pair rings was reduced. their working life was elongated extremely ; there was mainly much graphite, a little ptff, moo3, feso4, cus and so on in lubricant transfer film

    試驗結果表明：所選原料的尺寸、形狀及純度可滿足固體潤滑劑的性能要求；聚四氟乙烯樹脂熱分解溫度超過400 ，但在ptfe中加入無機填料會使復合材料吸水率提高，熔融溫度及分解溫度降低，且伴有氧化分解反應；碳纖維表面含有c = o及c - o - c等極性基團，有利於提高其與其它組分的相容性，提高層間剪切強度；均勻設計試驗方法能夠用較少的試驗次數找出配方與摩擦性能間的關系，擬合曲線基本能表示各配方的摩擦系數發展趨勢；配方中不加銅粉或不加石墨，其摩擦系數均較高，說明銅粉和石墨應該配合使用；當銅粉15份、石墨60份時，銅粉30份、石墨30 - 40份時，銅粉60 、石墨15 - 30份時，摩擦系數均具有較低值；純聚四氟乙烯樹脂在空氣冷卻時結晶度最大，磨損量也是三者中最大的；同時，固體潤滑劑試樣在空氣冷卻時的磨損量也是三者中最大的：不論是固體潤滑劑與45 #鋼軸配副或是固體潤滑劑鑲嵌入銅套后與gcr15鋼軸配副，在金屬表面均可形成潤滑轉移膜，從而減少金屬摩擦副表面間的直接接觸，大大延長其使用壽命;轉移膜中主要含有較多的石墨、少量聚四氟乙烯、 moo 。
  6. The conventional methods of the gemmology and the modern instruments of electronic probe, ultraviolet - visible spectrophotometer, fourier transform infrared spectrometer, cathodoluminescence spectrometer are used to research and analyse the flux - grown synthetic spinel and compare them with the natural spinels

    摘要採用常規的寶石學研究方法以及電子探針、紫外可見分光光度計、傅里葉變換紅外光譜儀和寶石陰極發光光譜儀等現代測試儀器，對助熔劑法合成尖晶石的寶石學特徵進行了全面分析，並與天然尖晶石進行了對比。
  7. The results showed that the melting ratio of silica flux decreases and the complete melting time prolongs with the size of silica flux and matte grade increasing, and the effect of the blowing air and oxygen enrichment is not remarkable in the high grade copper matte converting process

    對于高品位冰銅轉爐吹煉，鼓入氣體流量和氧濃度對石英熔劑熔化率影響不顯著；熔劑粒度和冰銅品位對熔化率影響顯著，並隨著熔劑粒度和冰銅品位的增加，熔劑熔化率降低，完全熔化時間延長。
  8. In this paper the formula, the technics, the dosage of the filler and the macromolecule coupling agent are studied which influence the technics condition, mechanical properties, structure configuration. also x - ray large angle diffraction, scan electron microscope, dta etc are used to analysis and test the properties of the pp / talc composites. conclusions as follows : 1

    本文系統地研究了復合體系配方、工藝方法、填料及偶聯劑用量對復合體系工藝條件、力學性能及結構形態的影響，同時利用廣角x射線衍射、掃描電鏡、 dta等對復合體系的性能進行了測試與分析，主要研究內容及結論如下： 1滑石粉的加入，雖然使pp的熔化時間增加，但是混煉能耗下降，有利於pp的加工；偶聯劑的加入，使pp的熔化時間增加，能耗略有降低，總體而言，對加工無不利影響。
  9. Several factors affecting the melting of silica flux, such as the size of silica flux, matte grade, blowing air and oxygen enrichment were discussed

    主要考察了熔劑粒度、冰銅品位、鼓入氣體流量和氧濃度對石英溶劑熔化的影響。
  10. They have excellent corrosion, thermal shock resistance and spalling resistance. they wide applications and can be used in key locations of thermal processing equipment such as bof, eaf, lf and so on. 2 alumina - magnesia - carbon brick made from high - purity bauxite or fused alumina and fused magnesia grain or high purity magnesia by pressing, resin - bond for thermal shock resistance

    1 ，鎂碳磚是不燒的耐火材料，經過摩擦壓磚機的成型以及乾燥處理后而成，它的主要原料是電熔鎂，高純鎂砂和高純石墨，結合劑為樹脂，鎂碳磚有良好的耐侵蝕性，熱震穩定性和抗剝落性，它已經被廣泛地用在鋼廠的轉爐電爐鋼包精煉鋼包等關鍵部位。
  11. The result of experiment showed that the reaction between ti and c is a thermodynamic course, when 2 wt % mg is added to melt, it can restrain the formation of fragility phase al3ti, and gained al matrix composite which contained tic reinforced particles only. because mg reacts with the forms a micro - high temperature field around the oxide around the graphite particles and the oxygen gas which is brought by the immersion bell, and the reaction gives out a lot of heat energy, thus forms many high micro - fields in melt, which prompt the reaction between the al and ti

    加入適量的mg （ 2wt ）可以抑制tic al復合材料中的脆性相al _ 3ti的產生，生成僅含tic的鋁基復合材料；由於活化劑鎂在體系中與石墨顆粒周圍的氧化物、以及外來的氧反應放熱，在熔體中形成微高溫區，促進al - ti反應，同時， al - ti反應也是放熱反應，因此體系中的內能急劇增大，促使al _ 3ti分解以及ti朝c顆粒擴散，縮短反應的孕育時間。
  12. The optimum mole ratio of flux to composition was found to be 6 : 4, which can restrain the formation of pyrochlore phase. it was revealed that b2o3 additive played an important role in increasing the size of single crystals. 4

    助熔劑和組分間的摩爾配比以6 ： 4為佳，能夠抑制焦綠石相的產生；此外，添加少量的b _ 2o _ 3作助熔劑有利於晶體的長大。
  13. Abstract : melting behavior of silica flux in the converting process of high grade copper matte was investigated

    文摘:研究了高品位銅冰銅轉爐吹煉石英熔劑熔化行為。
  14. The morphological features, the inclusion features, the ultraviolet - visible absorption spectrum, infrared spectrum and the cathodoluminescence features of the flux - grown synthetic spinel provide reliable evidence for identification

    助熔劑法合成尖晶石的晶體形貌特徵和包裹體特徵以及紫外可見吸收光譜、紅外光譜和陰極發光特徵為其鑒定提供了可靠的依據。
  15. In the course of selecting oxide additives material in the nickel - ferric spinel based inert anode, both the solubility in the cryolite molted salt of oxide additives and the whole thermodynamics action in electrolyte of oxide additives are discussed in this article, thus to have a comparatively reasonable selection of the nickel - ferric spinel based inert anode material

    在選擇鎳鐵尖晶石基惰性陽極材料氧化物添加劑過程中，不僅探討了氧化物添加劑在冰晶石熔鹽中的溶解度，而且還探討了氧化物添加劑在電解液中的整個熱力學行為，從而對鎳鐵尖晶石基惰性陽極材料做出了較為合理的選擇。
  16. The main ingredient in concrete, cement is made by heating limestone and clay until they fuse into a material called clinker, which is then ground up and mixed with various additives

    混凝土中的主要成分水泥的生產是通過加熱熔解石灰石和粘土，生成一種名為溶渣的物質，然後再對溶渣進行碾磨，並加入各種添加劑加以混合。
  17. It is made of fused magnesite and high purity flake graphite by adding metal composite antioxidant and phenolic resin as binder. it has the excellent properties of corrosion resistance, spalling resistance, resistance to oxidation and better thermal shock resistance. it can be used in all kinds of converters, eaf, refining ladles and common ladles. upon request, multiple lining - up designs of reasonable materials can be provided according to the working conditions of above mentioned furnaces

    採用電熔鎂砂、高純鱗片石墨為主要原料，添加金屬復合抗氧化劑，以酚醛樹脂為結合劑製成的製品具有優良的抗浸蝕性、抗剝落性、抗氧化性和良好的抗熱震性，適用於各種容量的轉爐、電爐、精煉鋼包及普通鋼包，本公司可根據用戶要求，針對上述4種熱工窯爐的具體使用條件提出爐襯的材質綜合砌築方案。
  18. In attempt to prepare and study the novel electrically conductive nanocomposites, with polyethylene ( pe ) served as the matrix, maleic anhydride grafted polyethylene ( gpe ) served as eg intercalates and expanded graphite ( eg ) served as a conductive filler, prepared gpe / eg, pe / gpe / eg electrically conductive composites via solution intercalation ( si ), direct melt mixing ( dmm ) and master batch melt mixing ( mmm ) methods. by means of testing conductivity and mechanical property, with the measures of tem, sem, om, xrd and dsc, studied the relationship between preparation method, material composition, and electrically conductive as well as mechanical property. the main outcomes never reported at home and abroad literature were obtained as follows : 1 the gpe / eg electrically conductive nanocomposites were prepared via si method

    本論文以制備和研究新型高分子導電納米復合材料為目的，以聚乙烯（ pe ）為基體，馬來酸酐接枝聚乙烯（ gpe ）為插層劑，膨脹石墨（ eg ）為導電填料，採用溶液插層（ si ）法、直接熔體混合（ dmm ）法和兩者相結合的熔體母料混合（ mmm ）法制備了gpe eg 、 pe gpe eg導電復合材料，通過電導率和力學性能測試，運用tem 、 sem 、 om 、 xrd和dsc等手段，研究了制備方法、材料組成、形態結構和導電性能及力學性能之間的關系，得到以下未見國內外文獻報道的研究結果： 1採用si法成功制備了gpe eg導電納米復合材料，其導電逾滲閥值（ _ c ）為1 . 59vol ，遠低於dmm法制得gpe eg常規復合材料的_ c （ 3 . 13vol ） 。
分享友人
分享到 Line

分享到臉書