燒成效率 的英文怎麼說

中文拼音 [shāochéngxiàolǜ]
燒成效率 英文
firing efficiency
  • 燒 : Ⅰ動詞1 （使東西著火） burn 2 （加熱或接觸某些化學藥品、放射性物質等使物體起變化） cook; bake; hea...
  • 成 : Ⅰ動詞1 （完成; 成功） accomplish; succeed 2 （成為; 變為） become; turn into 3 （成全） help comp...
  • 效 : Ⅰ名詞（效果; 功用） effect; efficiency; result Ⅱ動詞1 （仿效） imitate; follow the example of 2 ...
  • 率 : 率名詞（比值） rate; ratio; proportion
  • 燒成 : baking
  • 效率 : productiveness; efficiency; productivity; workpiece ratio
  1. Meanwhile in the condition of high temperature, water vapors can participate in combustion. water gas reaction will happen, which will reduce carbon particle in flame, and reform combustion performance, so improve combustion efficiency. the article developed a kind of technology of water injection into intake ports for 4135g diesel engine, meanwhile designed a suit of water injection system

    同時在高溫條件下，水蒸汽參與燃燒，部分水分子與未完全燃燒的熾熱的炭粒發生水煤氣反應，形成可燃性氣體，從而減少了火焰中的炭粒，提高了油的燃燒程度，改善了燃燒狀況，提高了油的燃燒效率。
  2. How to improve the combustion efficiency and utilize energy sources rationally has been a very important subject in industrial production

    提高燃燒效率，合理利用能源，已經成為工業生產中的一個重大課題。
  3. Aiming at such problems in combustion system of homemade middle and miniature boiler, as a complex system with the character of dead zone, time variation, serious non - linearity, large time delay, coupling and a lot of disturbance, this paper presents a new set of optimal control resources. by using well - matched control method on system, stable automatic running is realized. having the serious divulgence coals difference a lot from each other in character, instability of chemistry, value of lowest emission of heat, home - made boiler controller is not at all ideal. instead of traditional model that controls the ratio based on proportional control or with the correct signal of the amount of oxygen, this paper, combined with intellect control theory - - fuzzy control and self - optimizing concept, propounded a kind of fuzzy self - optimizing controller to be used in air supplying system of the boiler, and expatiates on the idea of dividing the control process into two parts, dynamic and static to realize, thus meets the demand of homemade boiler economic running

    本設計針對國產中、小型電站鍋爐燃燒系統參數時變、嚴重非線性、干擾因素復雜、耦合嚴重、模型不易確定的特點，提出多變量協調控制方案，解決了系統可控性差，難以實現穩定自動運行的問題；在此基礎上，改變以往以煙氣含氧量控制送風的傳統模式，針對國產電站鍋爐設備主體及一、二次送風迴路泄露嚴重，煤種混雜、成分不穩定、燃燒發熱值低、燃燒效率不高等問題，應用智能控制理論中的模糊控制技術，結合自尋最優控制的思想，設計了一種模糊自尋優控制器，應用在電站鍋爐送風控制系統上，並闡述了動靜態兩種實現途徑，通過在線優化風煤配比，實現最佳經濟燃燒，切實保障了鍋爐的經濟運行。
  4. The burners of 220 t / h boiler in henan shenhuolv power plant were retrofitted by using the pulverized coal burners with stabilized - firing cavity and cutting down the distance between up - primary air and down - primary air etc. technologies, thus the boiler was successfully converted from originally designed burning high calorific value coal to low calorific value coal, the boiler could operate stably at 50 % load without oil - firing aid and the thermal efficiency of boiler reached 89 %

    摘要採用穩燃腔煤粉燃燒器並集中布置上、下一次風等技術對河南神火鋁電廠220t / h鍋爐燃燒器進行改造，成功地將該爐原設計燃用優質煤改燃為普通煤，並取得了改造后50 %負荷可無油穩定運行，鍋爐熱效率達到89 %的良好效果。
  5. If coreless melting furnace mainly for steel ， alloy steel ， cast iron ， and other ferrous metal materials and stainless steel ， copper ， aluminum ， zinc and other non - ferrous metal materials melting ， melting with high efficiency ， energy - saving ， metal components uniform ， burning less temperature or block ， simple operation ， easy to supporting the advantages of production lines

    中頻無芯熔煉爐主要用於鋼、合金鋼、鑄鐵等黑色金屬材料以及不銹鋼、銅、鋁、鋅等有色金屬材料的熔煉，具有融化效率高、節電、金屬成分均勻、燒損少、溫升塊、操作簡單、易於配套生產線等優點。
  6. The combustion - optimizing and automatic control system is being adopted on boiler no. 2 in jiaozuo power plant, successfully realizing the combustion optimizing control of said boiler under constant load and varying load conditions, the on - line combustion debugging test, and the monitoring analysis of operation economic behavior, making the said boiler always to be safe operation with highest efficiency, enhancing averagely the boiler efficiency to more than 0. 5 %, economic benefit being obvious

    摘要焦作電廠2號爐採用燃燒優化與自動控制系統，成功地實現了鍋爐定負荷和變負荷過程的燃燒優化控制、鍋爐在線燃燒調整試驗和運行經濟監測分析，使鍋爐時刻在最高效率下安全運行，鍋爐效率平均提高0 . 5 %以上，經濟效益顯著。
  7. The security that the boiler burns depends on the stability of flame mainly, in order to avoid the emergence of the explosive incident of the boiler, the coal powder must be burnt steadily in the stove, if it is unstable to burn, temperature field is not even in the stove, light to cause thermal efficiency of boiler reduce greatly, cause to waste, heavy and easy to is it produce stove serious consequence to present

    鍋爐燃燒的安全性主要取決於火焰的穩定性，為了避免鍋爐爆炸事件的發生，爐內煤粉必須穩定燃燒，如果燃燒不穩定，爐內溫度場不均勻，輕則導致鍋爐的熱效率極大地降低，造成浪費，重則容易出現爆爐等嚴重後果。
  8. Moreover, it has been pointed out that the hydrogen engine used in ? cylinder injection with high pressure can increase volumetric efficiency and compression ratio, - therefore, the performance indexes in this engine, such as output power, thermal efficiency, range of thickness of mixture with normal operation and nox emission, can be improved, and it is possible for the engine to realize rapid combustion of thin mixture, so abnormal combustion, such as backfire, pre ? ignition, can be controlled effectively

    指出了採用內部混合氣形成方式且高壓噴射的氫發動機，有利於提高充氣效率和壓縮比，從而改善發動機的動力性和經濟性；有利於擴展發動機正常工作的濃度范圍；並且有利於實現稀薄混合氣快速燃燒，從而可以有效地抑制早燃、回火及爆燃等異常燃燒和no _ x排放量。試驗指出了發動機的點火正時、噴射正時及噴氫量對發動機的性能、異常燃燒、 no _ x排放量有很大影響。
  9. Great difference in pressure for two flow made pressure wave system and it help to extend the delay time for gas in chamber, which increases combustion effusion. second, to increase combustion effusion, the inlet temperature of air and gas should be enhanced in the range of heat releasing in chemical reaction. third, the first work condition is unburned absolutely and the second work condition is burnt in shear layer of inlet and the end of down wall zone in straight segment

    對于壓力差很大的兩股氣流，所形成的壓縮波系的結構可以增加燃氣駐留時間，提高燃燒穩定性;為了提高擴散燃燒的效率，在保證能放熱的化學反應溫度范圍之內，應適當提高燃氣及空氣的來流入口溫度;燃氣噴嘴應居於燃燒室軸線上，是改進超音速燃燒室結構的一種思路。
  10. With fast development of our country " s gas industry and air ' s increasingly serious contamination in city, using gas instead of coal and supplying energy in high efficiency and cleanliness has become necessary way in city. there are different problems in the current heating ( air conditioning ) systems. in the cogeneration system, heat and power affect each other, heating - pump heating ( aie conditioning ) system can not satisfy the peak load very well, the cost of gas fuel in boilor heating sestem is so high. the high generating efficiency of the diesel - engine two - sourse heating ( air conditioning ) systems is limited in range of 100kw - 1000kw, the heating scope is so limited. combined cycle of two sourse heating ( air conditioning ) system is most suitable selection to buesness community with big scope my paper aim at this syetem ' s primary question when it is applied in our country - - - - bringing project into execution and technology economy feasibility and off - design performence, combined with a certain demonstrating project in beijing buesness community, going along with calculating and analyzing, drawing out some efficient datas and conclusions, based on this, bringing out primary alements affecting combined cycle of two sourse heating ( air conditioning ) system " economics

    熱電聯產系統熱電相互牽連，熱泵供暖（空調）系統不容易很好地滿足尖峰負荷，鍋爐供暖系統供熱中天然氣燃料構成的成本過高，內燃機雙源供暖（空調）系統的高發電效率僅限於100kw - 1000kw負荷范圍，供熱面積有限。對于大面積的商業園區、居民小區，燃燒天然氣的燃氣-蒸汽聯合循環雙源供暖（空調）系統是最佳選擇之一。本論文針對該系統在我國應用時的主要問題- - -方案的技術實施與技術經濟可行性，結合北京某一商業園區示範工程，進行了系統的計算與分析，得到了有效的數據與結論，在此基礎上，提出影響聯合循環雙源供暖（空調）系統經濟性的主要因素，並進行敏感性分析，得出有益的結論；最後通過各種供暖方案的比較分析回答了某些人對該系統的疑慮和不解，並指出系統的優化方向。
  11. The optimal control system of economical combustion is simulated by computer. and the theory of economical combustion and the reasons causing low heat efficiency are discussed in the paper. the sub - optimal feedback control system is proposed in which oxygen setting is controlled by a fuzzy controller

    對燃燒系統最優控制進行計算機模擬研究，分析了經濟燃燒的原理及造成鍋爐燃燒熱效率低的原因，構成了模糊控制含氧量給定值的閉環次尋優控制系統。
  12. The new drive system adopts gear drive instead of the traditional rubber belt transmission, therefore realizes optimum transmission of pumping unit by overcoming the disadvantages of the belt transmission

    該系統把傳統的抽油機膠帶傳動改變為齒輪硬性傳動，徹底克服了因膠帶傳動而造成的抽油機傳動效率低、電動機過載被燒毀，以及因慣性載荷造成抽油機的沖擊和振動等弊端，實現了傳動最優化。
  13. In this thesis, designing " a " furnace arch by applying momentum synthesis and applying the laminar coal supply device to improve the burning in furnace, the operation duty of chain boiler, the thermal efficiency of boiler, are studied, according to the problems of the irrationality on boiler proper frame and the disproportion on system disposition in the design and the operation of chain boiler

    本文根據鏈條鍋爐設計和運行中存在鍋爐本體結構上的不合理、系統布置上的不匹配等問題，研究了利用動量合成法設計「 」型火焰爐拱，以及利用分層給煤裝置來強化爐內燃燒，改善鏈條鍋爐運行工況，提高鍋爐熱效率。
  14. Otherwise it will decrease the flame burning efficiency, even cause the flame blowout or boiler explosion under unsteady burning conditions. so it is necessary to monitor the flame burning states

    燃燒不穩定，不僅會降低鍋爐熱效率，產生污染物和噪聲，而且在極端情況下會引起鍋爐爐膛滅火，如處理不當就會誘發爐膛爆燃，造成事故。
  15. Discussed taking advance condensation heat of water in waste fume. at the same time, the water can absorbed several pollutants in waste fume

    對比了不同空氣系數下，不同排煙溫度時的余熱回收溫度效率，探討了利用燃燒過程中生成水的冷凝熱及其對污染物的吸收作用。
  16. The simulations results show that the spoiler is available to make the fuel and the oxidizer coming from the former to stay in the cavity for a long time, to let the fuel and oxidizer mix and burn completely. since there is a high temperature zone forming by vortex in the middle of the motor, it required a restricted thermal protection. the plate with holes decreased the vortex function in the cavity, which could not promote the combustion efficiency, but to decrease temperature in the cavity and be benefit to thermal protection of the wall

    計算結果分析表明:擾流板可以使燃料和氧化劑在擾流腔內的滯留時間加長，促進燃料與氧化劑的摻混燃燒，提高燃燒效率，但由於渦流在發動機的中間部位形成了高溫燃燒區域，致使局部燃料和絕熱層燒蝕速率增大，加大了熱防護的難度;孔板結構減弱了擾流腔內迴流區的漩流作用，不能增加推進劑燃燒效率，但可以使擾流腔內的溫度降低，給壁面熱防護帶來好處。
  17. The feasibility of oxygen - enriched combustion in diesel engines was analysed in theory from aspects of heat release rate of fuels and combustion products

    通過對燃料燃燒的放熱效率及燃燒生成物進行分析，進而對柴油發動機富氧燃燒的可行性進行理論分析。
  18. The new concept of combustion in i. c. engines, hcci combustion mode, becomes the highlight of current researches for its outstanding advantages of low nox, pm emissions and high thermal efficiency. the control of auto - ignition time and heat release rate is the most difficult technical question in realizing hcci combustion

    為了實現內燃機的高效、清潔燃燒，國內外學者都把內燃機的新概念燃燒作為研究重點，尤其是hcci燃燒模式以其低nox 、 pm排放，高熱效率的突出優點成為當前研究的熱點。
  19. The outline of fiber ' s tip has very great influence on the coupling efficiency. it is reported, using the way of grinding and melting to form a microlens on the fiber ' s tip, can increase fiber ' s numerical aperture, reduce the ellipticity of laser, and improve coupling efficiency

    光纖端面的形狀對耦合效率有很大的影響，有文獻報道，採用拋磨燒熔等加工方法，可在光纖端面形成一個微透鏡，增大光纖的數值孔徑，對入射激光進行橢圓度校正，從而提高耦合效率。
  20. The mixing of air and fuel can be improved, d ) adding air distributary valve at exit of air - intake can increase the amount of air bifurcated into the dome region, so the value of combustion efficiency is increased, e ) increasing gas generator nozzle number can improve combustion characteristics in the dome region and produce good condition for combustion progress, f ) when the fuel streams are ejected into the second combustor with a angle, the combustion efficiency is increased, g ) when the speed of fuel streams increased, the intension and temperature of recirculation region is improved

    兩個進氣道在補燃室周向成180度布置，有利於增強燃氣同空氣的摻混； 4在進氣道出口增加空氣分流擋板，有利於增加進入頭部的空氣流量，提高燃燒效率； 5增加燃氣噴管數量能增強燃氣同空氣在頭部的燃燒效果，為燃燒的進行創造良好的條件； 6
分享友人
分享到 Line

分享到臉書