直線尺寸 的英文怎麼說

中文拼音 [zhíxiànchǐcùn]
直線尺寸 英文
linear dimension
  • 直 : Ⅰ形容詞1 （成直線的; 硬挺的） straight; stiff 2 （跟地面垂直的; 從上到下的; 從前到后的） erect; v...
  • 線 : 名詞1 （用絲、棉、金屬等製成的細長的東西） thread; string; wire 2 [數學] （一個點任意移動所構成的...
  • 尺 : 尺名詞[音樂] （中國民族音樂音階上的一級 樂譜上用做記音符號 參看「工尺」） a note of the scale in ...
  • 寸 : Ⅰ量詞（長度單位） cun a unit of length （=1/3 decimetre）Ⅱ形容詞（極短或極小） very little; very ...
  • 直線 : 1. （不彎曲的線） straight line2. （急劇的） steep; sharp
  1. The system can display in 3d the robots with higher quality graphics on pc by adopting the solid model technology, and modify the model of robots according to the size given by users, so that the parametric modeling is realized under interactive mode. it realizes the graphics simulation of robots in kinematics in both articulatory space and cartesian space, and it also realizes the animated simulation of trajectory of linear interpolation in point - to - point mode. the movement of robots can be realized by graphics teaching or programming

    該系統採用實體造型，能在微機上顯示較高質量的機器人的三維圖形，可以按照用戶給出的尺寸修改模型，在交互方式下，實現機器人的參數化造型；系統能夠在關節空間和笛卡爾空間中進行運動學的圖形模擬，能進行點到點直線插補軌跡的動畫顯示，機器人的動作可以示教再現，也可以由程序設定。
  2. Therefore, the method of screen spreading is presented herein with the following basic feature : taking the surface of the perpendicular line at the end of the distortion and bottom as the datum plane, move the controlling point of every distortion part to the datum plane with the principle of changeless of geometry size, and then the spreading is formed

    為此提出一種屏幕展開方法，此方法的基本要點是，以扭曲面末端垂直線和底部起坡線所在的平面為基準面，將扭曲面各分塊的控制點按幾何尺寸不變的原則搬到基準面，即可形成展開圖。
  3. Disigning coolant channel on the firebox of liquid rocket engine to loxodrome ( equal - angle helix ) groove can improve firebox coolant capability greatly. because the width dimension of loxodrome groove is narrow and the depth is deep, some machining methods are incapable, such as end - milling or electrochemistry. according to the peculiarities, a cnc disk - cutter - milling method which is composed of five motion axes with four simultaneously interpolated ones is researched. because most firebox generatrix is composed of complex curves, it is very difficult to get cnc cutting program with manual means. in order to deal with the problem, the loxodrome mathematics model is studied, and an auto - programming software system is developed. the software system can generate cnc cutting program of loxodrome on many kinds of turned surface. the constriction - distension segment of firebox is the most representative workpiece. the sharp changing of its generatrix slope makes loxodrome milling difficult. with the theory analyzing and practice cutting experiment, some applied techniques, which include milling mode and direction, choosing cutter diameter and cutting start point setting, are developed. adopting the technology above, tens regular workpiece have been manufacturing. the two - year manufacture practice has confirmed the validity and feasibility of developed loxodrome coolant channel milling method. the developed technology is also worth to be referenced to other similar workpiece

    將液體火箭發動機燃燒室的冷卻通道設計為斜航線（等傾角螺旋線）槽形，可以大幅度改善燃燒室的冷卻性能.斜航線冷卻槽的槽寬尺寸較小而槽深尺寸較大，所以無法使用棒銑刀銑削、電化學等加工方式.針對這些特點，提出了五軸控制、四軸聯動的數控片銑刀銑削加工方法.由於燃燒室外表面的母線輪廓復雜，手工編制數控加工程序難度大.為了解決數控加工程序的編制問題，研究了斜航線的數學模型，開發了自動編程軟體系統.使用該系統，可以生成多種母線輪廓回轉體外表面上的斜航線數控加工程序.燃燒室收斂-擴張段的母線斜率變化大，加工難度大，是斜航線冷卻通道加工的最典型工件.經過理論分析和實際切削實驗，研究了針對該類型工件的片銑刀直徑選擇、銑削方式和方向、刀具調整和起刀點的設置等多項實際的加工方案.採用上述的一系列技術，已經成功地加工了數十個合格工件.經過兩年多的實際生產過程應用，驗證了所開發的斜航線冷卻通道加工方法的正確性和可行性.這些加工技術的研製成功，對其他相似類型零件的加工亦具有參考意義
  4. Series full - auto pipe expander with drawing device and program interface is used with extruding machine. it is also used solitarily, while expanding pipes, the machine adopts translation, the action is steady and corret, it does not damage pipe materical, the machine adoptes double - infrared heating oven type, each oven is equipped with heating cire, the shaping method adopts expanding - end shaping, the size of pipe mouth is correct. on its panel, there is a transfer swith of expanding solvent type pipe socket ( straigh port ) and expanding sealloop type pipe socket ( rport ). the choice of expanding pipe type is very convenient, the technologocal adaptability is strong, its main electric control elements are all imported. the syetem charecteristics are steady and reliable

    配有與主機配套的接料牽引裝置和相應的程序介面，既能與擠管主機聯線使用，又可以作單機使用；擴管時管材的移動均採用平移方式，動作平穩準確而且不易損傷管材；這種機型採用紅外線加熱方式且為雙加熱爐型，每個加熱爐都配有中心加熱爐芯；成型方式均採用擴管頭定型方式，管口成型尺寸準確；該機型在控制面板上設有擴溶劑型承介面（直口）和擴彈性密封圈型承介面（ r口）的轉換開關，擴管方式選擇十分方便，工藝適應性強；主要的電器控制元件均採用進口元件，系統性能穩定可靠。
  5. Figure 7 : tail or crescent bond is the shape of the thermosonic bond on the substrate ( ball bond is on dimensions are shown in the box to the right of the figure

    月牙形焊接（熱超聲焊的末端）的尺寸和形狀直接與引線直徑和毛細管的幾何形狀有關。
  6. Figure 6 : drawing3 showing wedge bonding operation on the second bond, at the substrate bondinger. figure 7 : tail or crescent bond is the shape of the thermosonic bond on the substrate ( ball bond is onthe die side )

    月牙形焊接（熱超聲焊的末端）的尺寸和形狀直接與引線直徑和毛細管的幾何形狀有關。
  7. Standard guide for dimensional coordination of rectilinear building parts and systems

    直線建築構件及系統的尺寸協調規格
  8. Adopt transfiequency motor to control speed, processing speed fast and high processing efficiency ; adopt double straight line rolling glide and double ball screw rod transmission system guarantee the processing size s veracity and stability. upper chamfer angle can automatic rise and fall so its have easy handling, compact structure the minimum width of the glass can be 127mm

    加工速度快，效率高雙直線導軌和雙絲桿傳動系統確保了加工尺寸的準確性和穩定性，上倒角自動升降的先進性，使其具備操作方便結構簡潔等特點。
  9. The position and size of the monochromator, focusing curvature radii and tilting angles of the germanium focusing monochromator under different different take - off angle, size and divergency of the second collimator and intensity loss due to the use of it were determined. the neutron flux at different wavelength, under different reflection and take - off angle of the monochromator and divergency of the first collimator, were given. the simulation on the aperture used for limiting beam size in front of the sample showed that, smaller the size of the aperture and further the distance from the aperture to the sample, greater the loss of the intensity and more serious the spread of the beam along vertical direction at the sample position which makes the practical sampling volume greater than expected

    用蒙特卡羅模擬方法對中子應力衍射譜儀的設計方案進行了優化研究，提出了一系列可供參考的數據：確定了單色器的位置、尺寸、垂直聚焦單色器在不同起飛角下的聚焦曲率半徑和傾角；討論了第二準直器的尺寸和發散，以及使用第二準直器造成的強度損失；給出了在不同單色器反射面、起飛角、中子波長和第一準直器發散度的情況下樣品處的中子注量率，以及多種組合情況下譜儀的解析度曲線；對限束方孔的尺寸、距離樣品遠近對強度損失和測量中的影響做了深入研究。
  10. The influences of stator ' s teeth on vibrating modal of the linear standing wave usm are discussed in this paper, in which eigenfrequency and wave - shape are analyzed while the position and geometry dimension of stator ' s teeth are changed, and it can give some advice on design for standing wave linear ultrasonic motor

    摘要本文對一類直線型駐波超聲電機振子的振動模態進行了系統的分析，討論了定子齒的位置、幾何尺寸對直線型超聲電機的固有頻率、振型的影響，為該類駐波型直線超聲電機的設計提供了理論依據。
  11. The results indicated that the dimension, shape and purity of base material could meet the functional demand of solid lubricant ; the thermal decomposition temperature of ptfe resin exceeds 400 c, but organic and inorganic packing filler added in ptfe made the water absorption rate of composite material increased, melting temperature and decomposition temperature decreased, in the meanwhile oxidative decomposition reaction was accompanied ; polar groups such as c = o, c - o - c and so on in the carbon fiber surface is advantageous to increase compatibility with other components and interlayer shearing strength ; uniform design experimental method could help to find the relationship between formula and frictional property by relatively small tests. the developing trend of each formula ' s friction coefficient could be showed by fitting curve ; the friction coefficient with no copper powder or graphite in formula was relatively big. this fact showed that copper powder and graphite should be used cooperatively ; it was found that when the ratio of copper powder to graphite by weight is 15 : 60, 30 : 30 - 40 and 60 : 15 - 30 respectively, the friction coefficient was relatively small. the degree of crystallinity of pure ptfe reached maximum by air cooling and the abrasion loss also reached maximum among three ones ; at the same time, the abrasion loss of solid lubricant sample was also the biggest among three ones ; when solid lubricant matched with 45 # steel axle or gcrl5 steel axle, lubricant transfer film could be formed on metal surface, thus direct contact between the surface of metal friction pair rings was reduced. their working life was elongated extremely ; there was mainly much graphite, a little ptff, moo3, feso4, cus and so on in lubricant transfer film

    試驗結果表明：所選原料的尺寸、形狀及純度可滿足固體潤滑劑的性能要求；聚四氟乙烯樹脂熱分解溫度超過400 ，但在ptfe中加入無機填料會使復合材料吸水率提高，熔融溫度及分解溫度降低，且伴有氧化分解反應；碳纖維表面含有c = o及c - o - c等極性基團，有利於提高其與其它組分的相容性，提高層間剪切強度；均勻設計試驗方法能夠用較少的試驗次數找出配方與摩擦性能間的關系，擬合曲線基本能表示各配方的摩擦系數發展趨勢；配方中不加銅粉或不加石墨，其摩擦系數均較高，說明銅粉和石墨應該配合使用；當銅粉15份、石墨60份時，銅粉30份、石墨30 - 40份時，銅粉60 、石墨15 - 30份時，摩擦系數均具有較低值；純聚四氟乙烯樹脂在空氣冷卻時結晶度最大，磨損量也是三者中最大的；同時，固體潤滑劑試樣在空氣冷卻時的磨損量也是三者中最大的：不論是固體潤滑劑與45 #鋼軸配副或是固體潤滑劑鑲嵌入銅套后與gcr15鋼軸配副，在金屬表面均可形成潤滑轉移膜，從而減少金屬摩擦副表面間的直接接觸，大大延長其使用壽命;轉移膜中主要含有較多的石墨、少量聚四氟乙烯、 moo 。
  12. The main results show that : ( 1 ) the mechanism of laser bending is very different from that in bending with hard tools. ( 2 ) the bending angle is varied along scanning direction, and there is a deformation wave in the process. ( 3 ) the effects of sheet length on bending can be neglected while the length is more than 10 times of thickness. ( 4 ) the sheet width has much higher influence on the bending process

    分析發現：激光彎曲成形時板料的應力狀態與機械折彎時有根本不同；當激光束沿直線單向掃描時，板料兩端的彎曲角度不同；板料的長度大於10倍板厚或5倍光斑尺寸時，板長對彎曲角度的影響不再顯著；沿掃描方向，距離光斑中心3倍光斑尺寸以外的區域，仍然對彎曲變形量產生影響。
  13. Design engineers now selecting pmbldc motors over conventional dc or induction motor drives for the following reasons : 1 ) the absence of brushes results in an essentially maintenance free operation and eliminates the undesirable effects of commutation such as sparks, brush - loss, radio - frequency interference, etc. 2 ) the low inertia of the rotor enhances the quality of the mechanical response of the motor, shortening the acceleration and deceleration time. 3 ) utilizing rare - earth permanent magnet materials with high coercive force results in substantially higher efficiency than their counterpart with brushes of the same size. 4 ) because of the absence of commutation segments, the stator construction is simple

    現在的工程師們更為青睞永磁無刷直流電動機是因為以下幾點原因： （ 1 ）去除了電刷的永磁無刷直流電動機徹底地免除了維護而且消除了我們不希望的由於換向帶來的火花、電刷損耗以及無線電干擾等等； （ 2 ）低轉動慣量的轉子提高了電機機械響應的質量，從而縮短了電機加速和減速的時間； （ 3 ）高矯頑力稀土永磁材料的使用使得同樣尺寸的永磁無刷直流電動機比傳統的直流電動機效率高； （ 4 ）由於沒有機械換向部分定子的結構簡單了。
  14. Abstract : in this paper, the kinematically admissible velocity fields are established by using the metal flow patterns based on the experiments, and the configuration dimensions of billet and the curves of load - stroke in precision forging process for spur gear from solid billet are simulated on computer by upper bound method. the results acquired in the simulation are in good agreement with those obtained in the experiments

    文摘:本文利用有實驗根據的變形流動模式建立動可容速度場，利用上限法模擬用實心坯料精鍛直齒圓柱齒輪時坯料的外形尺寸變化和力?行程曲線，所得結果與實驗測定值很一致，可供沖擠精鍛工藝設計參考。
  15. The slope of a line is independent of the scales chosen to prepare the graph.

    直線的斜率與繪圖所選用的比例尺寸無關。
  16. The front part uses the bright color in the middle while darker color on the two sides. the upper part of the brighter color is wider than the lower part while the upper part of the darker color part is narrower than the lower part. the contrast of color and stripes leaves an vivid impression and overcome the shortcoming of the old machines - boring and monotonous

    Klk的外觀針對大屏幕液晶觸摸查詢一體機設計，其機身正面採用中間亮色兩側暗色，且亮色部分上寬下窄，暗色部分上窄下寬，這樣通過色彩和線條的鮮明對比，克服了同尺寸的klb等其他老機型，機身正面過寬且直上直下，臃腫呆板的缺陷。
  17. The tensile and compression experiment on bulk nanocrystalline ag prepared by igc method was carried on mt810 with different grain sizes and zwick 10tn2s machine at different strain rates under normal temperature respectively. the stain rate sensitivity m was found to be 0. 025, which was extremely lower than the ordinary values. also the work hardening exponent is very low

    本文從用惰性氣體蒸發冷凝和真空原位壓結法（ igc ）制備得到的直徑80mm ，厚度7 . 6mm的大尺寸納米晶金屬ag樣品上切割得到符合力學實驗要求的拉伸和壓縮試樣，在mts810和zwick精密力學測試機上分別精確測定了拉伸和壓縮應力?應變曲線與晶粒尺寸和應變速率的關系。
  18. Abstract : the design of later twist roll of roughing and intermediate mills, which are imported by maanshan iron and steel co., exist great bias. the reasonable size of twist bar diameter is gotten by theory analysis and calculation. so the problem of alternating motion of roll is resolved based on it

    文摘:馬鋼引進高線軋機粗中軋機后扭轉輥設計存在較大偏差，通過理論分析和計算，得出扭轉輥試棒直徑的合理尺寸，使用此值，從根本上解決了軋機的竄輥問題。
  19. The measurement of defect and the common image processing methods are realized, such as histograms showing, invert transform, fake - color transform and curve transform. 3

    設計並實現了x射線探傷圖像中缺陷尺寸的自動測量及一些常用的圖像處理演算法，如：灰度直方圖顯示、負像、偽彩色以及銳化等； 3
  20. Testing of mineral fibrous insulating materials ; determination of linear dimensions and bulk density, casings

    礦物纖維絕緣材料的檢驗.測定直線尺寸和體密度.管殼
分享友人
分享到 Line

分享到臉書