短梁 的英文怎麼說

中文拼音 [duǎnliáng]
短梁 英文
fork beam
  • : Ⅰ形容詞(空間、時間兩端之間的距離小) short; brief Ⅱ動詞(缺少; 欠) lack; owe Ⅲ名詞1 (缺點) we...
  • : 名詞1 (屋架中架在柱子上的長木) beam 2 (通常也指檁) purlin 3 (橋) bridge4 (物體中間條狀隆起...
  1. It can be seen from the results that the control beam had good plastic property in the static failure experiment after two million fatigue loading circles. all specimens with corroded main bars were failure under the fatigue loads within one million fatigue circles. fatigue lifespan of reinforced concrete beam was sharply shortened after main bars corroded in it and the beam was destroyed bristly without any prediction

    試驗結果表明,振動測試不能夠對銹蝕鋼筋混凝土的疲勞破壞做出可靠的預測;對比在經過200萬次疲勞循環加載后的靜力試驗中仍表現出良好的延性破壞特徵;銹蝕在100萬次疲勞循環內均因主筋疲勞斷裂而破壞;主筋銹蝕使得的疲勞壽命急劇縮;發生脆性破壞而沒有徵兆。
  2. Corbels, deep beams and pile caps are included basically in non - flexural elements, the calculative theory of which is relatively complicated, and its calculative method of which is not consistent

    牛腿與深、樁帽基本上屬于非受彎構件,其計算理論相對復雜、計算方法也不盡一致。
  3. For reinforcement concrete corbel with the shear span to depth ratio ( a / ho ) less than 1, has its performance of mechanics that is close to cantilever deep beams, it is an important kind of components in architectural structure which sustains roof trusses, brackets, tray " beams, frame " beams, wall " beams and crane " beams

    剪跨比a h _ 0 1的鋼筋混凝土牛腿,其受力性能接近於懸臂深,在建築結構中是支承屋架、屋面、托架、托架、框架、墻和吊車等的重要構件。
  4. 4. the relation between re - bars strains and cycle index n is obvious. the larger the is, the shorter the n is, and the relation of them is inverse ratio

    ( 4 )鋼筋應變與試件的循環次數n之間有規律性,應變越大,疲勞壽命越,兩者成反比關系。
  5. Americans generally use either the short ton or the kip in their stress calculations.

    美國人在橋的應力計算中通常用噸,或者用千鎊。
  6. After several years efforts, our company have set up the cooperation relations with many domestic and foreign companies. at present, we mainly produces all kinds of automobile crossmember, spring hanger, stainless steel and other products

    通過幾年的努力公司與國內外多家公司開展了協作關系,現主要生產各種汽車橫、汽車板簧支架、不? ? ? 、鋁製品等產品。
  7. Study on short - beam interlaminar shear strength of glass - cloth epoxy laminates at low temperatures

    超低溫下層合板復合材料的短梁法層間剪切強度研究
  8. Stumps were inserted and welded between the two straddles so that the girders become an integrated arched girder

    變異拱高低跨連接處採用柱焊接,形成一個完整的鋼拱
  9. The method described in this paper may simulate real natural wind at the site of bridge using real wind velocity continuous records in short period and putting aside wind spectrum on the base of simulating merit or demerit, then buffeting response has been analysised

    本論文在分析了已有風場模擬方法優缺點的基礎上,沒有採用已有的風譜,僅用橋址處期的實際風速時程記錄,進而模擬該橋處的實際風場,從而分析橋的抖振響應。
  10. The bridge rotation construction craft is the efficient method especially in the gorge, cliff, or arduous landform for its simple erection equipment, short time limit, safe construction

    轉體施工工藝是在深山峽谷、懸崖陡壁、地形險峻的橋位上架設橋的有效方法。架設設備簡單,工期,施工安全方便,免去復雜的高空作業,質量可靠,投資省。
  11. The subject of investigation in the paper could make up the deficiency of the beams under loading combined antisymmetric end moments with transverse uniformly distributed load, and supported the reference for researchers and designers in the field

    本文還分析了影響受彎構件整體失穩的幾種主要因素,特別是通過大擾度理論分析了「縮」效應對整體穩定的影響,這一影響因素在一般的文獻中很少提及,從而使得這方面研究更加全面。
  12. Standard test method for short - beam strength of polymer matrix composite materials and their laminates

    聚合母體組合材料及其層壓製件的短梁強度的標準試驗方法
  13. Instead of the conventional node - node model, the spot - weld is modeled by a new short beam element introduced into between node and clement, which is subject to the tensile and shear forces

    新型焊接單元在有限元節點與單元之間引入短梁單元來模擬焊接關系,單元承受拉伸力和剪切力。
  14. Abstract : based on the systematic analysis of the shear behavior for r. c. beams, the tests of 11 simple supported beams under the top concentrated loads and the uniform loads are supplemented. the prime variable is shear span ratio, span depth ratio, horizontal web reinforcement ratio and vertical web reinforcement ratio. according to the test results, the working behavior, the prime shear failure modes, the effect of concrete and web reinforcement ( horizontal web reinforcement and vertical web reinforcement ) and other aspects of r. c. beams are analysed. the uniform calculation method for shear capacity of deep beams, short beams and shallow beams for practical is presented

    文摘:在對國內外鋼筋混凝土的受剪性能進行較系統分析的基礎上,補充了11根鋼筋混凝土簡支短梁在頂部集中荷載和均布荷載作用下的試驗,試驗的主要變化參數為剪跨比、跨高比、水平腹筋率和垂直腹筋率.根據試驗結果,對試驗的工作性能、主要的剪切破壞形態、混凝土項的抗剪作用、抗剪腹筋(包括水平腹筋、垂直腹筋)的作用等進行了較為深入的分析,提出了可適用鋼筋混凝土深短梁和淺相互協調的受剪承載力的統一計算方法
  15. In this paper, based on the test results of reinforced concrete deep beams, short beams and slender beams under flexture, the behavior and the ultimate moment of deep flexture members are discussed in detail. the calculating formulas for flexture bearing capacity and the design suggestion of reinforeed concrete deep flexural members are also given, and this may provide reference for the revision of p. r. c. design code

    結合我國混凝土結構設計規范修訂的需要,根據我國深短梁專題組的試驗結果,較詳細地分析了深受彎構件力臂變化的規律,提出了可與淺銜接的鋼筋混凝土深受彎構件的受彎承載力計算公式,為我國混凝土結構設計規范的修訂補充這方面的內容提供了依據
  16. Shear capacity of r c continuous short beams

    鋼筋混凝土連續短梁受剪承載力計算
  17. Test method for apparent horizontal shear strength of pultruded glass fiber reinforced plastic rods by the short - beam method

    拉擠玻璃纖維增強塑料桿表觀水平剪切強度短梁剪切試驗方法
  18. Test method for apparent horizontal shear strength of pultruded glass fiber reinforced plastic rods by the short beam method

    拉擠玻璃纖維增強塑料桿表觀水平剪切強度短梁剪切試驗方法
  19. Standard test method for apparent horizontal shear strength of pultruded reinforced plastic rods by the short - beam method

    短梁法測定擠拉制增強塑料棒表觀水平剪切強度的標準試驗方法
  20. Fibre reinforced plastic composites - determination of apparent interlaminar shear strength by short beam - method iso 14130 : 1997 ; german version en iso 14130 : 1997

    纖維增強塑料符合材料.用短梁法測定表面層間剪切強度
分享友人