磨損機 的英文怎麼說

中文拼音 [mósǔnjī]
磨損機 英文
abrader
  • 磨 : 磨動詞1 （摩擦） rub; wear 2 （研磨） grind; mull; polish 3 （折磨） grind down; wear down [out]:...
  • 損 : Ⅰ動詞1 （減少） decrease; lose 2 （損害） harm; damage 3 [方言] （用尖刻的話挖苦人） speak sarcas...
  • 機 : machineengine
  • 磨損 : wear and tear; abrasive wear; abrase; abrade; detrition; wear; scuff; wear out; fray; battering; ...
  1. The research results show that, from the viewpoint of second phase morphologies, there exist quite differences between the grain - type materials ( such as wc / bcu brazing deposit material, wrs1000 and 1zt tungsten carbide strengthening overlaying material, as well as the wear - resistant material of polymer adhesive coating etc. ), and the aggregation - type as well as dispersion - type ones ( such as zg35simn, wrd - 1 and khc - k2 depositing material ) in the wear - resistance and sand slurry abrasion mechanism. the sand slurry abrasion mechanisms are brought forward, of new wear - resistant materials with the features of grain - type second phase morphologies

    研究發現，與聚合型、彌散型第二相的材料（如zg35simn 、 wrd ? 1和khc ? k2熔敷材料等）相比，顆粒型第二相的材料（如wc bcu釬焊熔敷耐磨材料、 wrs1000型耐磨材料、 1zt碳化鎢顆粒增強熔敷材料及ktc ? 1耐磨膠粘塗層材料等）在耐磨性能和磨損機理等方面均有不同，總結提出了以「顆粒型第二相」為特徵的耐磨新材料泥沙磨損機理。
  2. Wear mechanism of polycrystalline cubic boron nitride tools

    刀具的磨損機理
  3. Simultaneity the friction mechanism was investigated based on the surface morphology inspected by sem

    運用sem觀測磨損表面形貌，探討摩擦磨損機理。
  4. Research on abrasion mechanism of stellite ni60 coatings cladded by plasma arc

    60等離子弧熔覆層的磨損機理研究
  5. Standard test method for relative resistance to wear of unglazed ceramic tile by the taber abraser

    用泰伯磨損機測定未上釉瓷磚的相對耐磨力的標準試驗方法
  6. Fretting wear mechanism of plasma sprayed wc 18co coating

    塗層微動磨損機理的研究
  7. The method can be adopted to research micro dynamic behavior and changing of friction surface and to show mechanism of abrasive wear

    為研究摩擦表面上的微觀動態行為與變化，認識磨粒磨損機理，提供了一種基於微觀數值模擬的途徑和方法。
  8. And with the increased test time, the superiority of the low carbon high alloy steel was well illuminated. the worn surfaces of the three steels show that the mechanism of the low carbon high alloy steel is impact abrasion, the high manganese steel is impact - corrosion, and the medium carbon alloy steel is the heaviest impact - corrosion

    最後通過hitachi - x - 650掃描電子顯微鏡考察了低碳高合金鋼、高錳鋼和中碳合金鋼試樣的沖擊腐蝕磨損表面形貌，並用olympus光學顯微鏡進行了光學金相分析，對這三種鋼的磨損機理進行一定的探討。
  9. The progress in the research on the mechanical properties, mechanism of tribological wear, biological compatibility and microstructure of carbon fiber ( cf ) reinforced polyether - ether - ketone ( peek ) composite is reviewed in this paper

    摘要綜述了碳纖維增強聚醚醚酮（ peek ）復合材料在機械力學性能、摩擦磨損機理、生物相容性、微觀結構等方面的研究進展。
  10. The seal has worn and the machine is losing oil

    密封處已經磨損，機器漏油了。
  11. In order to study the slurry erosion properties of the particle reinforced polyurethane composites, a slurry erosion test apparatus was designed and manufactured based on the considerations of comparison between the present slurry erosion apparatuses and cost factor. the slurry erosion test apparatus proved to stable and reliable through tests, and it can be applied to material selection and erosion mechanism research

    經過實驗驗證表明，該沖蝕磨損試驗機供漿穩定，磨損數據重現性較好，是較為可靠的研究漿體沖蝕磨損的試驗裝置，適合於進行耐磨材料對比選擇以及漿體沖蝕磨損機理的研究。
  12. 3. calculating the portion and area of different wear form made by wear methenism with a coding method based on the margin element. and judging the action degree of wear methanism. 4

    運用一種基於邊素的圖像輪廓編碼方法，應用圖像外圍輪廓的編碼法計算出不同磨損機製造成的磨痕形狀所佔的面積及在整個磨損主體中所佔比重，判斷磨損圖像不同磨損機制的作用程度。
  13. In order to discuss the friction and wear mechanisms of mos2 nanoparticles, it was analyzed that the chemical status of elements existed on the rubbed surface by x - ray photoelectron spectroscope, and it was observed that the surface topography of wear zone by scanning electron microscope

    通過x射線光電子能譜儀（ xps ）分析磨痕表面元素的化學狀態，掃描電子顯微鏡（ sem ）對磨痕的表面形貌進行分析，從而總結了納米二硫化鉬在n46機械油中的摩擦磨損機理。
  14. Wear mechanism of compound sic tool for austenitic manganese steel cutting

    刀具切削高錳鋼的磨損機制
  15. Wear mechanism of cubic boron nitride tool in cutting austenitic manganese steel

    聚晶立方氮化硼刀具切削高錳鋼的磨損機制
  16. In this paper, based on the wear theory, the wear mechanism and the main disable forms are discussed. the more appropriate archard wear calculation model is selected. the cam ' s wear model in view of the influence of surface topography is established

    本文以磨損理論為基礎探討了內燃機凸輪挺柱的磨損機理及主要失效形式，選擇了比較合適的archard磨損計算模型，建立了考慮表面形貌的凸輪磨損計算模型，得到凸輪磨損的數值模擬模型。
  17. This paper made three contrast experiments on changing fan ' s inlet, analyzed the preventing erosion theory of each experiment and the improvement degree of the erosion of fan ' s impeller and vanes

    論文對改造風機進氣箱減磨的方法進行了三個對比實驗，分析了不同方法所採用的防磨損機理以及對風機葉輪葉片磨損的改善程度。
  18. The effects of heat treatment on dry friction and tribological properties under water lubricating are also studied elementarily

    本文還初步探討了熱處理對復合材料干摩擦磨損特性的影響及復合材料在水潤滑時的摩擦磨損特性及磨損機理。
  19. Results of the experiments showed that the wear mechanisms of the sintered steel included abrasive wear, adhesive wear and fatigue wear, and it was the abrasive wear most important. it was the sintered steel mixed by ni, mo that was the best on the wear resistance, because of the great lot of bainite ; the sintered steel quenched and low temperature tempered mixed by mo, w that was the best on the wear resistance, because of the rigidity of the steel was the highest

    實驗結果表明：本文中幾種燒結鋼的磨損機制均是由磨粒磨損、粘著磨損、和疲勞磨損共同作用的，且以磨粒磨損為主；在燒結態下，復合添加合金元素鎳、鉬的燒結鋼的耐磨性能最好，這是因為生成了大量的硬質相貝氏體；而淬火、低溫回火態下，則復合添加鉬、鎢的燒結鋼的耐磨性能最好，這是因為熱處理態下添加鉬、鎢的燒結鋼的硬度最高。
  20. The friction and wear behavior of dlc gradient film on tj6a14v alloy substrate sliding against ultra - high molecular weight polyethylene was investigated by comparing with that of ti6a14v alloy against the same counterpart under the same testing conditions

    研究了dlc梯度薄膜材料與uhmwpe組成的摩擦副的生物摩擦學性能，探討了摩擦磨損機理。 ti6a14v基dlc梯度薄膜材料具有較好的減摩特性和耐磨損特性。
分享友人
分享到 Line

分享到臉書