等膨脹性線 的英文怎麼說

中文拼音 [děngpéngzhàngxìngxiàn]
等膨脹性線 英文
isodeme
  • 等 : Ⅰ量詞1 （等級） class; grade; rank 2 （種; 類） kind; sort; type Ⅱ形容詞（程度或數量上相同） equa...
  • 膨 : 動詞（物體的長度或體積增加） expand; swell
  • 脹 : 動詞1. （膨脹） expand; dilate; inflate 2. （脹大） swell; distend; bloat
  • 性 : Ⅰ名詞1 （性格） nature; character; disposition 2 （性能; 性質） property; quality 3 （性別） sex ...
  • 線 : 名詞1 （用絲、棉、金屬等製成的細長的東西） thread; string; wire 2 [數學] （一個點任意移動所構成的...
  • 膨脹 : expand; swell; dilate; inflate; puff; bulge; inflation; expansion; dilatation; buckling; swelling...
  1. The imported transparent glaze fired at lower temperature was analysed semi - quantitatively by adopting emission spectroscope. the stripping of lead and cadmium from this transparent glaze fired at lower temperature in ceramic product was determined by atomic absorption spectroscope. the effect of chemical composition on the stripping of lead and cadmium was analysed. upon the author s opinion, the overproof lead stripping from the imported transparent glaze fired at lower temperature can only be settled by adopting lead - free glaze instead of adopting low - lead prescription. the author succeeded in developing an excellent lead - free transparent glaze fired at the lower temperature of 1000 1050. the success is based on an inquiry into the feasibility of using such new agents of fusion as li2o and sro in replacement of pbo ; and on a study of the effects of the contents of sio2 ， al2o3 ， b2o3and other metallic oxides on such performances of glaze as coefficient of linear expansion, fusion temperature and transparency. it is also based on an analysis of coefficient of linear expansion of blank and glaze on an analysis of coefficient of linear expansion of blank and glaze on their correlation ; and on a study of technology for preparing glaze

    採用發射光譜儀對進口低溫透明釉進行半定量分析，並用原子吸收光譜儀測定其陶瓷製品的鉛、鎘的溶出量，分析化學成分對鉛、鎘溶出量的影響.結果表明，進口低溫透明釉採用低鉛配方不能解決鉛溶出量的超標問題，只有採用無鉛釉才能解決.探討用氧化鋰和氧化鍶等新型熔劑完全代替氧化鉛的工藝，研究釉料中氧化硅、氧化鋁、氧化硼和各種金屬氧化物的含量，對釉的線膨脹系數、熔融溫度和透明度等性能的影響.分析坯料、釉料的線膨脹系數及其相互關系和釉料制備的工藝，研製出優質的1000 1050低溫無鉛透明釉
  2. The software takes visual basic6. 0 as work flat, adopting activex technique, transfers autocad2000 painting orders from the exterior of vb through programme method. it is a re - exploitation software to design bellows expansion joints. the software adopts ejma, the current international widespread trade standard, as mathematics model

    波紋膨脹節是安裝在金屬管線上起熱補償、柔性連接等作用的管道連接構件，本文以visualbasic6 . 0作為操作平臺，採用activex技術，通過編程手段從vb外部調用autocad2000軟體中的繪圖命令，二次開發軟體，以目前國際上行業中普遍採用的ejma標準作為數學模型，編輯波紋膨脹節設計軟體。
  3. Because lung cancer cells may have some special hormone ( heterologous hormone ), and antigen enzyme, the role of these substances in the operation of bone joints, a result of bone and joint swelling pain, often involving the tibia, recife, ulnar and radial and bone and joints, often terminal expansion toes were clubbed fingers, x - ray radiography examination showed periosteal proliferation

    由於肺癌細胞可產生某些特殊的內分泌激素（異源性激素） 、抗原和酶，這些物質運轉作用於骨關節部位，而致骨關節腫脹疼痛，常累及脛、腓、尺、橈等骨及關節，指趾末端往往膨大呈杵狀指， x線攝片檢查可見骨膜增生。
  4. The crystallization and melting behavior of mellocene - catalized branched and linear polyethylenes of low molecular weight was studied. it was found that the crystalline lattice of branched polyethylene is larger than that of linear polyethylene because of the existence of branched chains. the melting behavior of branched polyethylene is similar to that of linear polyethylene since the branched chains can not enter the lattice. however, the crystalline behavior of low molecular weight branched polyethylene is the same as that of high molecular weight linear polyethylene, but different with that of low molecular weigh linear polyethylene. kinetics theory analysis evidenced that the transition temperature of growth regime of the branched polyethylene is about 20 lower than that of linear polyethylene with the same molecular weight. it may be attributed to the existence of short branched chains

    研究了金屬茂催化的低分子量支化聚乙烯和線性聚乙烯的結晶及熔融行為，發現支化聚乙烯的結構與線性聚乙烯相同為正交結構，但晶格略有膨脹.支鏈的存在對熔融行為影響不大，兩種聚乙烯的熔點均隨結晶溫度的升高而非線性增加，表現出低分子量樣品的共同特徵.但支鏈的存在對結晶行為卻有很大的影響，主要是由於支鏈的存在降低了晶體的結晶速率從而影響結晶過程，使得低分子量的支化聚乙烯的結晶行為與高分子量線性聚乙烯的結晶行為相似而與低分子量的線性聚乙烯不同.動力學分析表明，低分子量的支化聚乙烯的結晶生長方式的轉變溫度比同等分子量的線性聚乙烯降低了約20
  5. Several materials with large coefficient of expansion were selected to make packaging components, and it was found that the packaging materials have good temperature sensitivity and compatibility with optical fibers. experimental accuracy and repetition of fbg temperature sensitivity and compensation were discussed. have selected several materials which has bigger coefficient of expansion to do packaging components, have made many temperature experiments, there have not flaws, such as aging, crackle, absciss layer, packaging materials have good temperature sensitivity and compatibility with optical fiber ; have designed the simple and practical packaging components, have performed a serials of experiments about accuracy and repetition of fbg wave - length, have obtained the first step conclusion ; have analyzed the result and made comparison between the result of different experiment, have summarized the best packaging effect and several rules to reduce mistskes

    本文所做的主要工作包括以下幾個內容：一、選取了常見的熱膨脹系數大的材料製作封裝元件，經過多次一80到80反復測試，封裝元件沒有出現老化開裂、封裝裂紋、空洞、離層等缺陷，封裝材料具有良好的溫敏穩定性及復用性，與光纖相容性較好；二、對光纖光柵進行簡單、實用的封裝處理，就封裝效果的優劣性、波長測量的準確度、重復性和封裝時產生的波長損失等方面進行了一系列的實驗，得出了初步的結論；三、對溫敏和溫度補償式封裝的實驗數據進行了詳細的分析和對比，從數字上對溫變過程中光纖光柵中心波長的改變及溫變曲線進行了定量的分析，在大量實驗數據分析結果的基礎上，總結出哪種材料封裝效果更好，以及如何有效的減小實驗誤差。
  6. Since 1950s, changjiang water resources commission as well as other scientific research units have carried out engineering geological reconnaissance for large - scale cross structures and the whole route, meantime, researched special subjects, such as special soils ( expansive soil, loess ), the canal section in coal mining area, regional structure stability, sandy soil liquefaction etc

    自20世紀50年代迄今，長江水利委員會及其它科研設計單位對中線工程全線及大型交叉建築物進行了工程地質勘察，同時對特殊類土（膨脹土、黃土） 、渠線過煤礦區、區域構造穩定性、砂土液化等專題進行了研究。
  7. The results demonstrate that the theory predicted values of compression, bulk modulus, linear expansion, and thermal expansive coefficient of compressed solids are very agreement with the corresponding experimental data. in summary, the error with respect to theory prediction and its causes are pro bably analyzed in detail. the discussion suggests that the function of the phenomenological short - distance repulsive force constant a ( v ) and approximation for anderson - griineisen parameter 5t ( v ) proposed in this paper are valid and applicable in high pressures ( up to loogpa ) and high temperatures ( from debye temperature 0d to melting temperature tm ) for many types of solids

    在本文最後一節，為了驗證固體在等壓過程中anderson grhneisen參量乓與體積膨脹的唯象假設：乓久w兀的有效性，及由此假設而推導出來的等壓態方程的廣泛應用性，本論文主要針對十六種堿金屬鹵化物、三種堿性氧化物、三種硅酸鹽礦物質的線膨脹八n 、體積熱膨脹v vo （ n 、熱膨脹系數a （ n 、體積彈性模量肘d等隨溫度的變化作了理論上的預測，且與相應的實驗數據作了比較與分析
  8. It analyses the causes to bright image movement, studies principle to compensate image movement, conforms project to compensate image movement, and designs framework to compensate image movement in the article ; to analyze and design configuration of the scanning mirror, to select matters of mirror and its support structures on the principle of consistent line expansion coefficient ; to ascertain type of moment electromotor by most rotating angle speed and most rotating moment which are required by loads in the period to take pictures, as well as by figuration size of electromotor ; to design retarder according as the electromotor parameters ; to design and optimize lightweighted mirror shapes, because the mirror is key part ; to design flexure support structure, to analyze static and dynamic characteristics of the support structure by name of patran program for validating desig n rationality ; to study function of the scanning mirror electric control system ; to test precision of the system, the results indicate the rationality of design of the scanning mirror system

    本文通過分析像移產生原因、研究像移補償原理，確定像移補償方案，並根據像移補償原理設計補償機構；分析與設計掃描反射鏡系統結構，根據材料線膨脹系數一致原則，選擇反射鏡及其背部支撐的材料；由掃描反射鏡在擺掃周期內的最大擺掃角速度確定力矩電機的額定轉速，根據負載力矩確定電機的額定轉距，綜合電機外型尺寸等因素，確定執行元件? ?電機的型號；根據所選電機的參數指標，設計1 ： 6速比的減速器；利用patran軟體對掃描反射鏡系統中的關鍵件? ?反射鏡進行輕量化設計與優化；設計反射鏡柔性支撐結構，並通過軟體分析支撐結構的力學特性，驗證反射鏡柔性支撐結構設計的合理性；從原理上研究掃描反射鏡控制系統功能；進行系統精度測試，測試結果表明掃描反射鏡系統設計的合理性。
  9. During the research, we used the diffraction of x - ray. sem ( scanning electron microscope ), electron micro - probe, petrographic analysis, cements physical performance test, adiabatic test, concrete test and so on, also, we gave explanations to all kinds of expansion phenomenon

    本課題在研究過程中採用了x ?射線衍射掃描電子顯微鏡、電子探針、 x ?熒光分析、巖相分析、水泥物理性能試驗、絕熱試驗、混凝土試驗等手段，對各種膨脹現象作出了解釋。
  10. This paper analyses the problem of concrete cracking and leakage, and set up the model of the middle or low - strength steel slag anti - cracking and impermeable concrete ( acic ) on the base of the analysis. the four principles of water permeable resistance character, volume stability character, toughness and anti - chemical corroded character have been put forward for raw materials selection and durability design of acic, acic is designed by the theory of composite material and the theory of fiber - reinforced, and two series of acic, such as fly ash series and steel slag series, have been manufactured by means of mineral admixture, hybrid fiber and chemical admixture. hydrating heat, macro - mechanics quality, durability and microstructure of the acic have been researched

    本文對中低標號大體積混凝土滲透開裂問題進行了研究，從混凝土自身結構形成與經濟角度指出大摻量粉煤灰與膨脹劑復合配製大體積混凝土的問題所在，提出採用鋼渣微細礦粉配製中低標號防滲抗裂混凝土的思路，運用復合材料理論設計中低標號防滲抗裂混凝土，提出了低水化熱、抗滲性能、體積穩定性、韌性和抗沖磨性能是中低標號防滲抗裂混凝土材料選擇和耐久性設計的主要原則，採用鋼渣微細粉復合混雜纖維、化學外加劑的技術路線，配製了適合於深水等特殊環境中的大體積中低標號鋼渣系列防滲抗裂混凝土，對其進行水化特性、宏觀物理力學性能、耐久性和微觀結構研究。
  11. Which has high strength, good ductility, impact bearing, erode - bearing, besides, its linear expanding coefficient is almost equivalent to concrete, and it has excellent performance - price ratio etc. this paper is related to 8 rc - poles wrapped by gfrp ( sgfw430 ) and rc - poles are compressed axially, in order to analyze the influence of different stick layer over the pole ' s work performance and the influence between three type axial compress ratio ( 0, 0. 8, 1. 1 ) with one layer gfrp with the contrast poles about limit load - bearing capability, failure state, ductility, section stiffness, restrict losing owing to stress - difference

    其具有強度高，延性好；抗沖擊、耐腐蝕；線膨脹系數與混凝土接近；性能價格比高等多個特點。本文通過8根外包單向gfrp （ sgfw430 ）的rc組合柱，以及混凝土對比柱在軸心荷載作用下的試驗為基礎，具體詳細地分析柱子在粘貼不同層數的高性能玻璃纖維和在不同的軸壓比（ 0 、 0 . 8 、 1 . 1 ）下粘貼一層的高性能玻璃纖維后混凝土組合柱相對對比柱在極限承載能力、破壞形態、延性、截面剛度、應力差帶來的約束損失等方面的變化情況。
分享友人
分享到 Line

分享到臉書