組態完成 的英文怎麼說

中文拼音 [tàiwánchéng]
組態完成 英文
configuration completed
  • : Ⅰ名詞1 (由不多的人員組成的單位) group 2 (姓氏) a surname Ⅱ動詞(組織) organize; form Ⅲ量詞(...
  • : 名詞1. (形狀; 狀態) form; condition; appearance 2. [物理學] (物質結構的狀態或階段) state 3. [語言學] (一種語法范疇) voice
  • : Ⅰ動詞1 (完成; 成功) accomplish; succeed 2 (成為; 變為) become; turn into 3 (成全) help comp...
  1. The basic thought of the csapfba algorithm is : the edge routers perform the state management per flow, and the edge routers differentiate between the marked flows and the non - marked flows, and the edge routers insert the relevant information into the packet header by using dynamic packet state ; the core routers divide the output link bandwidth into two parts in the light of the state information of the packet header by using class - based queueing, and the core routers allocate proportionally the bandwidth to the marked flows according to their service profiles and the current network load, and the core routers allocate the bandwidth to the non - marked flows according to the principle of max - min fairness, and the csapfba algorithm can adaptively dynamically adjust the bandwidth allocation between the marked flows and the non - marked flows

    本文在csfq演算法的基礎上,提出了一種核心無狀的自適應的比例公平帶寬分配csapfba ( core - statelessadaptiveproportionalfairbandwidthallocation )演算法。 csapfba演算法的基本思想是:在邊界路由器基於每個流的狀處理,將所有的流分標記流和非標記流兩種類型,採用dps技術將有關信息編碼進分頭;在核心路由器根據分頭中攜帶的狀信息採用cbq策略,將輸出鏈路帶寬分兩部分,對標記流根據當前的網路負荷按照服務規格比例地分配帶寬,對非標記流按照最大最小公平性原則分配帶寬,並且能自適應地動調整帶寬分配的比例。
  2. The agent system of a _ dids consists of four modules : monitor agent, state detection agent, intrusion detection agent and auto response agent. every agent works independently and together to accomplish intrusion detection

    A _ dids的代理體系由監控代理、狀檢測代理、入侵檢測代理和自動響應代理,代理之間各自獨立又相互協作,合作入侵檢測的任務。
  3. The feasibility of decomposition of transition firing sequence, the application of them in the detecting lfs and the reverse course of decomposition - synthesis are discussed. they provide theoretic basis for our algorithm in the field of petri net. supported by the above, two main part is included in the algorithm : at first, x is transacted according to the following method in order to get a set of xb named as basic vector of x which is the firing count vector of a directed path without circle if md is reached from m0 in the rg ( m0 )

    在變遷序列分解的指導思想下,我們的演算法主要通過以下兩步工作: ( 1 )首先對給出的已知條件中滿足狀方程的n維非負整數向量進行處理,得到一x的基礎向量x _ b ,使得在petri網的可達標識圖中,若存在一條由m _ o到m _ d的有向無環路,則x _ b為這樣的路上變遷引發序列的發生數向量。
  4. In may 2004, aggregation of swinhoes egret was found on the caiyu archipelagos along the southern coast of fujian province. based on the sighting records, school of life sciences of xiamen university and xiamen birdwatching society had organized a jointed research on the breeding ecology and conservation of swinhoes egret. the project was sponsored by the hsbc wetland management training programme and was done from may to december 2004

    2004年5月,在發現福建南部沿海的菜嶼列島上有黃嘴白鷺等水鳥集群以後,廈門大學生命科學學院資源鳥類學研究和廈門觀鳥協會在世界自然香港基金會匯豐濕地管理資金的支援下,於2004年5月至2004年12月黃嘴白鷺繁殖生與保護項目。
  5. Secondly, introducing the image analyzing technology with reference to the disadvantages of the traditional ferr - graph analysis technology, and with the combination of characteristic parameter optimizing filtration so as to raise a description method of debris micro - morphologic character. thirdly, with the application of mode recognition method, completing the process of debris auto - recognition based on the collected information of the debris configuration characteristics ; and conducting the diagnosis on the aero - engine wear faults according to the theory of particle tribology. fourthly, introducing information fusion technology to solve the problem that a single method can not collect enough fault premonitory information to conduct the wear fault diagnosis, hence to conduct the research and exploration in the field of comprehensive diagnosis on the aero - engine ' s multi - fault premonitory information

    本文的研究工作主要包括以下五個部分:首先,介紹航空發動機常見的磨損故障類型,研究磨損故障的失效機理,分析磨粒的產生機理、分類以及形特徵:其次,針對傳統鐵譜分析技術的缺點,引入圖像分析技術,再結合特徵參數優化篩選,形基於圖像的磨粒顯微形學特徵描述方法:然後,基於提取到的磨粒形特徵信息,應用模式識別方法磨粒自動識別,並根據顆粒摩擦學的基本原理進行航空發動機磨損故障的診斷與定位:再后,鑒于單一方法不能提取足夠的故障徵兆信息進行磨損故障診斷,本文引入信息融合技術,開展航空發動機多故障徵兆信息綜合診斷方法的研究與探索;最後,基於航空發動機滑油光譜分析與鐵譜分析數據,應用時序模型、灰色模型以及合模型進行磨損故障的預測方法研究。
  6. Article 8 a trade union shall mobilize and educate workers to approach work with the attitude of being the master, to care for state and enterprise property and observe labour discipline and shall urge and organize workers to conscientiously complete production and work assignments

    第八條工會動員和教育職工以主人翁度對待勞動,愛護國家和企業的財產,遵守勞動紀律,發動和織職工努力生產任務和工作任務。
  7. It is known that end - point driven and static configuration agent based adaptive methods can not apply to analyze extension, dynamic and complexity properties of large - scale video multicast applications. to solve this challenging problem, we develop a hierarchical adaptive architecture for large - scale layered video multicast ( halvm ) based on dynamic self - organized agent. halvm decomposes a large - scale video multicast system into a series of hierarchical sub - systems of small - scale

    該體系綜合了代理的動織協議和可伸縮性視頻轉換編碼技術,將復雜的大型視頻播應用系統的動自適應問題分解為層次化的小型視頻播應用子系統,由發送者、接收者和層次化代理分佈自適應功能,是一個擴展性能好、管理與控制效率高的自適應解決方案。
  8. This thesis focuses on the ingress process module of ctu, which translates c - 5 dcp format to rainier 4gs3. the specification analysis, architecture and logic design, functional simulation testbench design, synthesis report and testing result are discussed in this thesis. the research work mainly includes : the specification analysis and design requirements of ctu logic ; the architecture and logical design of ingress process module, which includes receive control fsm, send control fsm and cell position adjustment logic ; the performance improvement of ingress process module to receive and transmit data cell at the full line speed

    本論文的主要研究工作包括:通信協議轉換邏輯的功能分析和設計需求;通信協議轉換邏輯上行方向的系統分析及體系結構設計,包括上行接收狀機、發送狀機、信元內位元位置調整機制等的設計;通信協議轉換邏輯上行方向的線速設計,主要是上行接收的線速設計,要使用流水設計技術;提出了高速實現roundrobin調度策略的實現方法,並設計實現了桶式移位器和優先級編碼電路;應用bfm模擬模型設計了上行處理各模塊的模擬testbench ,了各級模塊的模塊模擬和系統集模擬。
  9. The system is consist of the main data processing board which is based onthe fpga device and fast ethernet phyceiver rtl8201l and a - law pcm data encoder and decorder chip msm7702 - 3, and the dial - up and display board which is based on mcu. the main board would carry out the core task of data processing, such as voice data packing and unpacking, the ethernet frame processing, protocol processing, call processing, etc. the dial - up and display board would carry out the task of display the ip address which is input by consumer and status of network during talk period from the main board, and so on. in the paper the system of lan ip telephone and the tcp / ip protocol is introduced firstly, then the fpga device is stated. after that the fpga - based hardware scheme is introduced in detail in chapter four

    系統以altera公司的acex1k系列的fpga和快速以太網控制器rtl8201l和語音編解碼晶元msm7702 - 3為核心構建了數據處理主板和以單片機為控制器的撥號顯示子板。數據處理主板的核心任務,包括語音數據處理、以太網幀處理、協議處理、呼叫處理等。撥號顯示子板則通話前的顯示用戶所撥過的ip地址,通話期間網路狀的顯示等等。
  10. In this paper, a condition monitoring system in flexible manufacturing is designed and built for the actual requirement, this system is based on integration notion, detailedly analyzing the monitored and controlled object. the parts that is intelligent module, rs485 bus and configuration software are exploited for completing data acquisition and processing. this paper mainly expounds the research direction and the method about condition monitoring technic in flexible manufacturing. the paper also introduces the system structure. features and functions of the mcgs configuration software

    本文針對某廠加工車間的實際需求,通過對被監控對象的詳細分析,採用智能模塊、 rs485總線和軟體來數據的採集與處理,基於集的觀念,設計並建造了一個柔性製造過程狀監控系統,該系統實現了模塊間、系統間以及信息的集
  11. The present study is supported by the project of national science foundation of china, " 3d dynamic imaging of brain electrical activity " and by the project of science foundation of hebei, " noninvasive measurement and functional imaging of brain tissue " we design a primary hardware system of 16 electrodes on the base of the model

    本論文的研究是在國家自然科學基金重點項目「腦內電活動的三維動像」和河北省自然科學基金項目「腦內織電阻抗特性的無損檢測與功能像」的資助下的。本文設計並實現了一個初步的基於物理模型的16電極eit硬體系統。
  12. And power loss analysis of srs and the layout design related to srs are very important to the proper design. with a small signal mathematic model of half - bridge converter, the relationship between performance of power supply and frequency domain characteristics of the system is analyzed. based on the above study and some simulation the system design is completed

    文中在給出了結合單繞自驅動方案的對稱半橋變換器穩原理分析、同步整流管損耗分析暨選擇原則、同步整流管相關電路的布局設計后,建立了對稱半橋變換器的小信號數學模型,分析了電源系統時域性能指標與頻域特性之間的聯系,在此基礎上了系統的設計。
  13. The model of fujian power grid and models of generators, excitation systems, governor systems and loads are established, the tested excitation system models of large hydro and thermal units, the model of wind turbine are established as well in this paper with pss / e, a new software imported from pti of u. s. a. recently. some key points are proposed on data convertion from psasp and bpa to pss / e. the transient and dynamic characteristics between separate excitation system and transformer - fed excitation ( self excitation ) system are compared with pss / e

    本文了pss e的福建省電力系統的基本框架以及發電機、勵磁系統、調速系統、負荷的數學模型和參數,實現了大型水、火電廠發電機勵磁系統實測模型和風電機的pss e建模,提出了pss e與bpa 、 psasp數據互轉的部分要點,比較了福建電力系統現有大型水、火電廠發電機它勵與自並勵勵磁方式的動和暫性能的差別。
  14. It shows that the parallel implementation of the program is successive, a speedup 6. 33 performed on 8 nodes was obtained, and a very large mrci calculation with 5. 8 10 ^ 8 csf has been carried out on 12 nodes

    測試表明,程序的?行化基本上達到了預期的結果, 8個結點的加速比達到6 . 33 ,在12個結點上功地了5 . 8億自旋匹配的超大規模mrci計算。
  15. The government has organized experts to work out the report on the impact of the three gorges project on the ecology and environment, and countermeasures, and has approved the environmental impact statement of the three gorges project

    中國政府織有關專家了《長江三峽工程生與環境影響及對策的論證報告》 ,批準了《三峽工程環境影響報告書》 。
  16. According to the standard of can agreement the message agreement for the system has been designed. whose design thinking and its realizing way of the three kernel parts ( can kard ^ can oriented object and field communicatioan interface moudule ) in the system have been given. it is applied by the oriented subject technigue, and through the analyses of ststic characteristic, and dynamic characteristic of the equipment, the configuration tool category has been gotten to complete the configuration to equipment

    系統通過傳輸介質把監控中心和現場通信介面模塊掛接在can總線上,一個控制器局域網路,從而實現對各種在線通信電源設備的分散控制、統一管理;根據can協議的規范設計了系統的通信協議,給出了系統中三大核心部分( can適配卡、 can中繼器和現場通信介面模塊)的設計思路和實現方式,並給出了相關硬體電路的結構框圖以及軟體設計流程圖;運用面向對象技術,通過對設備的靜特徵和動特徵的分析,得到其工具- -類,對設備的
  17. Reports to management team customer to have a better picture of our current position help them to make further adjustments. allocation, market rate, new government regulations, etc

    以積極的度匯報管理小和客戶、並攜助對西安市場的進一步調整
  18. Reports to management team and customer to have a better picture of our current position and help them to make further adjustments. allocation, market rate, new government regulations, etc

    以積極的度匯報管理小和客戶,並攜助對西安市場的進一步調整
  19. Realized monitoring and controlling system implemented by the mcs - 51 system, realized data monitoring and process controlling implemented by the optical fiber sensor and intelligent instrument, realized operation station implemented by the ipc, realized data displaying, mmi, supervising of whole craftwork and control system and report forms printing implemented by the kingview 6. 03 software in the ipc. the ipc mis realizes management of hair - oil, browsing, inquiring and parameter setup and so on using microsoft vc 6. 0 and sql server2000 software. after the research and study, we implemented the serial communication between the ipc and mcs - 51 by advanced dde technology

    上位機採用功能強大、操作簡便的kingview6 . 03軟體進行過程數據顯示、人機界面操作和對整個工藝、控制系統的管理和報表列印等功能;上位機管理系統採用流行的microsoftvc6 . 0和sqlserver2000軟體進行編程,對發油開票管理、巡測、發油記錄瀏覽、統計查詢、參數設置、系統設置等功能;研究與設計了上位機與下位機之間的通訊系統,採用先進的dde (動數據交換)通訊技術實現上位機與下位機之間的串口通信。
  20. This suit of algorithm constitutes two parts : one is the bandwidth allocation algorithm against t - cont, which is executed in olt ; the other is the bandwidth utilization algorithm against t - cont, which is executed in onu

    該套演算法由兩大部分:一是olt端針對t - cont的帶寬分配演算法,其功能是依據各個t - cont的擁塞報告,結合網路整體負載狀四種類型帶寬在不同類型、不同擁塞狀的t - cont之間的分配;一是onu端針對t - cont的填充演算法。
分享友人