耐磨能力 的英文怎麼說

中文拼音 [nàimónénglì]
耐磨能力 英文
abrasion resistance
  • 耐 : 動詞（受得住; 禁得起） be able to bear or endure
  • 磨 : 磨動詞1 （摩擦） rub; wear 2 （研磨） grind; mull; polish 3 （折磨） grind down; wear down [out]:...
  • 能 : 能名詞（姓氏） a surname
  • 力 : Ⅰ名1 （力量; 能力） power; strength; ability; capacity 2 [物理學] （改變物體運動狀態的作用） forc...
  • 耐磨 : abrasion resistant; anti friction; wear resistant; wear resisting; wearproof耐磨材料 high abrasiv...
  • 能力 : ability; capacity; capability
  1. Tumble abrasion of a fabric is highly dependent on the inherent fiber toughness.

    織物耐滾磨的能力與纖維固有韌度相關密切。
  2. The research results show that when the fly ash content is under 30 %, the strength of rcc can be increased but the effect is a little ; and with the fly ash content increased the dry shrinkage of the rcc reduced straightly, and the abrasion resistance and freeze resistance increased obviously. ( 3 ) fly ash can increase durability of the rcc and under the experiment condition, the perfect mixing content is 30 %

    試驗結果表明： （ 1 ）粉煤灰摻量小於30 %時能提高碾壓混凝土強度但影響度不大； （ 2 ）隨著粉煤灰摻量的增加，碾壓混凝土的干縮呈直線降低，且抗磨性和抗凍融能力明顯提高； （ 3 ）粉煤灰能有效提高碾壓混凝土的耐久性，且在試驗條件下的最佳摻量為30 % 。
  3. This product is the newest filming technique, the latest achievement of usa electronic magic, it utilizes decomposition principle of electronic material to form a positive negative ions film on the surface of car coating, which has high water repellency and makes the surface of coat has more than 95 % brightness of mirror surface, lt has preeminent performance on weathering resistance, ageing resistance, oxidation resistance static resistance and wear resistance, with the force of charged ions, this product can easy removes the dirt, water drop acid rain and grease on the surface of the film and perennially and effectively protect coat surface, lt is the fourth generation car beauty and protective product which replaces glaze sealing products

    本品屬于當今最新的鍍膜技術，屬美國電子工學魔法的最新成果，它利用電子物質的分解原理，在車漆表面生成持有高撥水性的正負離子覆膜，使漆面光亮度可達鏡面光澤的95 %以上，並具有超強的耐候性、抗老化、防氧化、防靜電、耐磨性極好的功能，它利用電離子的力量，可輕松彈去覆膜表面的污垢、水滴、酸雨、油脂等，平時只需清水沖洗，便可立即使之恢復離子效應，達到長期保護漆面的目的，是取代封釉的第四代汽車美容保護產品。
  4. Variation ratio of dimensional after water rinse, ultimate strength, neps and pile, tearing resistance, bursting strength, joint strength, commissure ' s swerve strength, fabric shift ( slip ), ventilate degree, elasticity ( resilient rate / deformation rate ), anti - water permeability ( hydrostatic pressure ), extension and resilience, abrasive resistance, gets wet the nature, hydroscopicity, stock ' s transverse ductility, fire resistance, antistatic

    水洗尺寸變化率（縮水） ，斷裂強力，起毛起球，撕破強力，彈子頂破強力，脹破強度接縫強力，縫口脫開程度，紗線滑移性能（滑脫） ，透氣量，彈性（回復率/變形率） ，抗滲水性（靜水壓） ，延伸及回復性，耐磨性，沾水性，吸水性，襪子橫向延伸，阻燃性能，抗靜電。
  5. The al matrix composites by reaction synthesis put up high mechanical behavior, well high - temperature properties and excellent wearing quality but the existent difficulties lie in that homogenizing method is not perfect, fundamental research to growth mechanism is absent and the concomitance compound come from reaction is difficult to eliminate at present

    反應合成的鋁基復合材料具有常溫力學性能高、高溫性能好和耐磨性突出的優點，而存在的主要研究難題則是整個材料均質化方法不理想、生長機制等基礎理論研究缺乏、反應伴生的化合物難以控制等。
  6. Adopt high quality alloy, stainless steel, ti, cr and other metal for driving parts, the wear - resistance, costive - resistance, thermo - resistance and pressure - resistance is highly increased. the service life is long

    主要傳動部件均採用優質合金材料、不銹鋼材料、鈦材、鉻和其他表面合金製作，大大提高了耐磨損、耐腐蝕、耐高溫及耐壓能力，使該機具有較長的使用壽命。
  7. 4. hard maple : origin of north america and europe, wooden features : density 0. 49 - 0. 55g cm3, it is valued for its strength, beauty and resistance to wear. texture is fine with a uniform grain and a fairly clear white color. maple is best when left natural with a clear seal coating

    木材特徵：氣干密度0 . 49 - 0 . 55g cm3材質軟， ，強度，韌性適中結構均勻，紋理直，木材堅固，耐沖擊力切割，膠粘和磨光性能良好，耐腐耐磨性良好。
  8. The catena product is in the light of iso international criterion to design and make iso2858, pumpbody adopt metalline crust pad fluorine plastics inside, impeller and pump - cover all adopt metal embed part wrap fluorine plastics alloy outside to press. to make it possess superduper resist impact and eximious resist causticity, axis - envelop choose advanced outer - install form moire - pipe machine - airproof, airproof of oppositely abrade have silicon nitride chinaware f4 horniness alloy to choose. it has ratio of very high capability and price

    本系列產品按國際標準設計製造iso2858 ，泵體採用金屬外殼內襯氟塑料，葉輪及泵蓋均採用金屬嵌件外包氟塑料合金模壓成型，使其具有超強的抗沖擊能力又有卓越的耐腐蝕性能，軸封選用先進的外裝式波紋管機械密封，對磨的密封面有：碳化硅陶瓷四氟硬質合金可供選擇。
  9. Damping bearing is a kind of bearing with damping ring. it is not the same as traditional bearing not only on geometry but also on material. damping ring has many merits such as perfect abrasive resistance, good noise proof ability, good self - lubricating property, excellent resistance to impact and its life length is much longer

    該類軸承為帶阻尼環的推力軸承，在結構和材料上跳出傳統框架，陰尼環具有減振、抗噪、自潤滑、耐磨、耐沖擊等功能，是傳統推力止推軸承壽命的數倍。
  10. The anti - wearing property of chme steel is 15 percent to 35percent higher than zgmnl3, which is a widely used anti - wearing steel. the reason of the excellent mechanical properties and anti - wearing property of chme steel is that the heat treatment sturcture of chme steel is composed of tempered martensite, bainite, temper troostite, remaining austenite and carbonide

    磨面分析表明， chme鋼基體高強度，高硬度、良好的強韌性配合和碳化物硬質點的彌散分佈，磨痕細短淺小，擠塑變形區細小均勻，抵抗沖擊滑動累積塑性疲勞能力強，是其耐磨性比zgmn13高的原因。
  11. C. application : it is used in making glassware - plate glass, wired glass, figured glass, hollow glass, foam glass and glass block as beer bottle, cups, vacuum flask, optical glass, fiberglass and so forth. its application is common in founding, smelting, fireproof material, cement and chemical industry

    用途：製造玻璃，耐火材料，冶煉矽鐵，冶金熔劑，陶瓷，研磨材料，鑄造，石英在建築中利用其有很強的抗酸性介質浸蝕能力，用來制取耐酸混凝土及耐酸砂漿。
  12. Wear points of the die sections must be inserted for economical maintenance, replacement cost, and adjustability for stock variance

    所有模具入子耐磨的地方必須使用鑲嵌以方便經濟的維修，置換以及根據料厚的變化調整能力。
  13. The result shows that with the addition of rare earth elements, ultrasonic irradiation and magnetic field, the chemical component, surface configuration, microstructure and properties of electroless co - ni - b and co - fe - b alloy changes remarkably. such kind of change can be described as the followings. firstly the depositing speed of electroless alloy bath is raised while the polarizability and cathodic overpotential are reduced ; secondly the surface quality of the alloy coating and adhesion of the coating and matrix are improved ; thirdly in the coatings the content of the elements in the transient group increases, but the content of cobalt decreased ; fourthly the amorphous structure is transformed to microcrystal structure and polycrystal structure ; fifthly the microhardness and wear resistance of the coating are enhanced ; sixthly coercitive force is reduced, and magnetoconductivity of the coating is increased ; lastly the magnetic intensity of the coating increases with the addition of energy and light rare earth elements such as ce, la and decreases with the addition of heavy rare earth elements such as y. on the other side, when the alloy coatings passes through the heat treatment under the temperature of 250 or 500, their properties will change

    結果顯示化學沉積co - ni - b 、 co - fe - b工藝在稀土元素（ ce 、 la 、 y 、 dy ） 、能量（超聲波、磁場）介入后，沉積過程、合金成分、鍍層形貌結構和性能都有顯著變化，表現在：鍍液的陰極極化過電位和極化度降低，沉積速度提高；鍍層的結合力、表面質量改善；鍍層中過渡族元素的含量增加，輕元素硼的含量降低，同時證實了稀土元素與過渡族元素共沉積的可能性；鍍層的顯微結構由非晶態向微晶和多晶態轉變；鍍層的顯微硬度與耐磨性提高，力學性能優化；鍍層的矯頑力降低；磁導率提高；鍍層的磁化強度在能量（超聲波、磁場）和輕稀土元素ce 、 la介入后提高，重稀土元素y介入后降低。
  14. Determining endurance life and load - carrying capacity of dry sold film lubricants falex method, method for

    乾性固態薄膜潤滑劑的耐久磨損壽命和承載能力的測定方法
  15. Mechanical performance, frost resistance and abrasion resistance of concrete with fly ash, air entraining agent and four kinds of inorganic salts including sodium sulfate, sodium nitrite, calcium nitrite and sodium chloride are mainly studied in this paper

    本文研究了在路面水泥混凝土中摻入粉煤灰、引氣劑和四種無機鹽（ na2so4 、 nano2 、 ca （ no2 ） 2和nacl ）后，混凝土的力學性能、抗鹽凍剝蝕能力和耐磨性等性能的變化規律。
  16. The results show that the composites were more wear resistant than the matrix, contributing to the " volume effect " and " size effect ", the wear resistance increases with the particle content and size. the composite shows better wear resistance than high chromium cast iron material especially in low load and fine abrasive test condition. the results also indicate that the composite strengthened by ageing treatment was more wear resistant than as - cast composite

    磨損試驗結果表明，鑄造碳化鎢顆粒增強cu - ni - mn合金基復合材料具有比較高的抗磨料磨損能力，而且其耐磨性隨著鑄造碳化鎢顆粒體積分數及尺寸的增大而提高，表現出了強烈的「體積效應」及「尺寸效應」 ，尤其是在低載荷、細磨料磨損條件下，復合材料表現出更好的而寸磨性，即使與高鉻鑄鐵（ cr28 ）相比也有很大程度的提高。
  17. This paper unfolds engineering disposition and theoretical research of negative temperature high performance concrete ( nthpc ) with the damage of many factors motivation, the project background based on qing - zang railway engineering, which is one of four - emphasized engineering during the tenth five - plan. due to the difference of environment of construction and service between nthpc and ordinary concrete, and therefore durability of nthpc is required to higher level. at a first, nthpc must avoid frozen damage at early age and possess anti - freezing property at later period, in order to meet engineering practicable application need, and this are two emphasized and difficult problems, as for nthpc ; by means of mechanism analysis about deicing - agent ingredient and anti - freezing at early period, adopting composite technique routine of mineral addition + anti - freezing element + water - reducer4 - air - entraining + anti - erosion of steel component etc, based on orthogonal experimental approach, fd - 1 composite functional admixtu re was manufactured, which has more property and orientation on qing - zang railway

    負溫混凝土由於和普通混凝土在施工環境及服役環境上存在的差異，因此表現為比普通混凝土更為較高的耐久性要求；負溫混凝土首先要避免早期的凍害以及具備長期抗凍性能，才能夠滿足工程實際應用的要求，這也是負溫混凝土必須解決的兩大技術關鍵；通過對目前常用防凍劑組分作用機理的分析研究及混凝土早期防凍機理探討，採用礦物外加劑+防凍組分+高效減水劑+引氣+阻銹組分功能復合的技術路線，通過正交試驗設計復配了適應青藏鐵路工程要求的專用多功能復合型外加劑fd - 1 ；並在此基礎上配製不同等級負溫高性能混凝土，開展一系列包括硫酸鹽侵蝕、氯離子滲透、抗凍融循環、收縮及耐磨性等耐久性能研究；通過對fd - 1組分和摻量的調整，優化負溫混凝土在施工特性、力學指標和耐久性三個方面的兼容、協調性。
  18. The 2014 aluminium alloy treated by 500 solution and 165 ageing has fine alloy phases distributing equably, higher mechanical properties, thus the wear resistance is improved

    經500固溶和165時效處理后，其合金相分佈細小、均勻，力學性能較高，磨損時，在出現了犁溝的同時，還存在粘著剝落坑，磨痕最淺，耐磨性提高。
  19. The milling head has adopted gear transmission

    導軌經淬火處理，有良好的耐磨能力。
  20. Insufficient resistance to adhesive wear will induce failure by galling or seizure in the event these components make contact

    如果沒有足夠的耐磨能力，一旦零件之間發生接觸，則可能因咬死或卡住而導致失效。
分享友人
分享到 Line

分享到臉書