膠接強度 的英文怎麼說

中文拼音 [jiāojiēqiángdù]
膠接強度 英文
bonding strength
  • 膠 : Ⅰ名詞1 （某些具有黏性的物質） glue; gum 2 （橡膠） rubber 3 （姓氏） a surname Ⅱ動詞（用膠粘） st...
  • 接 : Ⅰ動詞1 （靠近;接觸） come into contact with; come close to 2 （連接; 使連接） connect; join; put ...
  • 強 : 強形容詞（強硬不屈;固執） stubborn; unyielding
  • 度 : 度動詞[書面語] （推測; 估計） surmise; estimate
  1. The juncture of between two boards of the flume box was agglomerated ( ) with stickiness first. then the top and the bottom board of the box were tighten with bolts

    水槽式加熱器箱體兩板間的連接首先用粘補膠粘接，然後在箱體的四周用螺絲連接，確保機械強度和密封性能。
  2. Gummed tape - testing methods for adhesive strength

    膠帶.粘接強度試驗方法
  3. The sort, material composite, structure properties and conduction mechanisms of eca ( electrical conductive adhesive ) were discussed in this paper. then three types of ega specimens were designed and made, on which temperature cycles test from - 55 ? to + 125 ? and thermal aging at + 125 ? were carried out. changes of the adhesive strength, eca ' s bulk resistance and contact resistance under the environment stress were summarized and a detailed evaluation on these specimens was given

    本文在全面闡述導電膠的分類組成、物理結構、導電機理的基礎上，設計並製作了三批導電膠樣品，通過對樣品進行長時間的- 55 ? ? + 125溫度循環和125高溫存儲試驗，總結了導電膠粘接強度、體電阻和接觸電阻在環境應力下的變化規律，對三類樣品的長期可靠性做出了全面的評價，並結合導電膠電阻率和「穿流閾值」的計算機模擬，給出了提高導電膠可靠性和電導率的建議，介紹了國內外在高電導率高可靠性導電膠研製方面的一些最新進展。
  4. The tea waste powder with different sizes as an additive was used to urea - formaldehyde ( uf ) resin, and the effects of the tea waste powder sizes and amount on the free formaldehyde content of uf resin, the formaldehyde emission, and hood strength of uf resin hooded plywood were studied in this paper

    摘要將不同顆粒度的茶葉廢料粉添加到脲醛樹脂膠中，研究了茶葉廢料的顆粒度、加入量等對脲醛樹脂膠黏劑的游離甲醛含量、黏接膠合板的甲醛釋放量及膠合強度的影響。
  5. The experimental results indicated that the tea waste powder as an additive to uf resin could reduce its free formaldehyde content and reduce the formaldehyde emission of uf resin bonded plywood ; the tea waste powder with much less size was easily mixed with uf resin and acted much more effective ; the tea waste as an additive to uf resin in a proper amount did nut decrease the bond strength of plywood

    實驗結果表明，茶葉廢料作為填料添加到脲醛樹脂膠黏劑中，能夠降低其游離甲醛含量以及其黏接膠合板的甲醛釋放量；茶葉廢料顆粒度越小，與脲醛樹脂混合性越好，消除甲醛效果越顯著；茶葉廢料的適量加入不會降低膠合板膠合強度。
  6. This paper mainly discussed the optimization design of two - stage star - type gear transmission system. it covered the two sides : one - stage gear transmission and two - stage gear transmission. on the basis of their analysis and research, the mathematic models are created which include the objective functions of minimum volume and minimum center distance, the constraints of contact strength, bend strength and scuffing strength

    本文主要研究了航空發動機星型齒輪傳動系統的優化設計，對單級齒輪傳動和兩級星型傳動都進行了深入的分析和探討，分別以系統體積最小和中心距最小為目標函數，以齒輪的接觸強度、彎曲強度、膠合強度等為約束條件，建立了完整的數學模型。
  7. Analysis of bonding strength of two room - temperature - curing wood adhesives

    兩種常溫固化木材膠粘劑膠接強度分析
  8. Aim at the influence that different material of the adhesive boned joint and the different surface processing method connect the strength, we chose the surface processing method that spray sand to remove the rust add wreath oxygen to prepare draw the paint when construction operation

    針對膠接接頭的不同材質及不同表面處理方式對膠接強度的影響，我們通過分析選擇了在膠接時應用噴砂除銹+環氧預塗的表面處理方式。
  9. Abstract : this paper researches into the complex adhesive ， which was mainly made by the soy protein isolate ( spi ) and polyvinyl alcohol or polyvinyl acetate. different composition of protein and polymers can perform different characters, together with other ingredients. the factors, which are related to the first adhesive strength and adhesive strength, are mainly studied and discussed. the first adhesive strength of the complex adhesive is related to the content of spi, and the adhesive strength is related to the content of the complex adhesive. on the basis of the researching, we can make the plant fibre box for food in the future

    文摘:對大豆分離蛋白?聚乙烯醇、大豆分離蛋白?白乳膠復合膠粘劑進行了研究，採用不同混合比例及添加其他助劑，得到較好性能和可生物降解的復合膠粘劑，為製造一次性植物纖維快餐盒打下基礎.主要研究了影響這種復合膠粘劑粘接木塊的初粘力（剪切和拉伸強度）和粘接強度的因素，實驗表明： 9 . 2 %濃度的大豆分離蛋白的初粘力（剪切和拉伸強度）優於10 %濃度的聚乙烯醇膠和33 %濃度的白乳膠；大豆分離蛋白復合膠粘劑的初粘力主要與大豆分離蛋白含量有關，其最終粘接強度與膠液固含量正相關
  10. The antiablation of silicone rubber liner can be improved both by changing the structure of unvulcanized rubber and adding antiablative fillers, and the bond strength between propellant charge and the liner would be increased largely by coating the primer liquid on the charge surface

    硅橡膠包覆層中填料的粒徑對硅橡膠的補強效果十分重要；可從改變生膠結構、添加耐燒蝕填料兩方面來改善硅橡膠包覆層的耐燒蝕性；在推進劑藥柱表面上塗覆底塗液可以大幅提高硅橡膠包覆層與推進劑的粘接強度。
  11. The homopolymer white emulsion, which is a emulsified adhesive, is the metastable state of polymer particles after dispersing in water. it has stable adhesion, high adhesive strength, strong initial adherence, and quick drying speed. the emulsion is easy to dilute and hard to burn

    均聚白乳膠，系水乳型粘合劑，是聚合物微粒分散於水中的亞穩定體系，具有粘接性能好粘接強度高，初粘力大快乾無毒無異味無溶劑可稀釋不易燃等特點。
  12. In order to study the direct relation between oil - base drilling fluid performance and cement job quality, a new developed evaluation method ( artificial core method ) was adopted ; the effects of the oil - base drilling fluid system and its main components on the shear cementing strengths of the first and second interfaces in cementing operation were investigated ; and those of the different mix slurry ratios on the gel strength, initial set time, final set time of slurry and the compressive strength of bond cement were examined too

    摘要為了研究油基鉆井液性能和固井質量之間的直接關系，採用新建立的評價方法人工巖心法，考察了油基鉆井液體系及其主要組分對固井作業中第一、第二界面剪切膠結強度的影響規律，以及不同混漿比例下對水泥漿膠凝強度、初凝時間、終凝時間和水泥石抗壓強度的影響規律。
  13. The plastics and board adhesive is particularly for the bonding of the pvc wood grain decorated plastic plate and the plank or the fiber board of medium density, etc since it has high adhesive strength and strong adsorption power. the adhesive can be used for the adherence of paper and plastics also

    塑板膠，粘接強度大，吸附力強，不易脫膠翹邊，對pvc木紋裝飾塑片與木板中纖板等材料的復合粘貼具有獨特的粘接效果，亦可用於紙-塑粘合。
  14. Abstract : this paper introduces a new class f epoxy glass - cloth laminate. the synthesis of a epoxy adhesive and the production process were studied. the properties of the laminate were compared with those of some similar products abroad. the results show that the laminate has higher adhesive strength 、 resistivity in moist conditions 、 dielectric strength and mechanical strength in higher temperatures. it is applicable for electric equipments, especially those to run in higher moisture or higher temperature conditions

    文摘:本文介紹了最近開發成功的一種新型f級耐高溫層壓板，研究了環氧樹脂膠粘劑的合成，層壓板的製造工藝及其性能，並與國外同類產品進行了對比，結果表明，它具有粘接強度、浸水后絕緣電阻及耐電壓、高溫機械強度高等特性，可用作大型高壓電機、輸變電設備以及核電工程、低溫高真空工程中絕緣結構材料，尤其適用於高電壓、高溫、高機械強度的工作環境。
  15. As a new building material for reinforcement and strengthening, the supply and application of epoxy resin structural adhesive are more and more, but standard structural adhesive itself has the disadvantages such as worse working performance, low bond strength, brittleness, low elastic ratio. so it is necessary to modify the structural adhesive

    環氧樹脂建築結構膠作為一種加固修復的新型建築材料的需求量變得越來越大，應用的范圍也越來越廣，但目前環氧樹脂結構膠存在工作性能不好、粘接強度不高、脆性大、彈性模量較低等缺點，所以有必要對其進行改性研究。
  16. Tightsen uv adhesives can be used for bonding, sealing, encapsulating of glass, plastic etc. cure in seconds, when exposed to uv light soures, with high shear strength and excellent optical charactors

    泰盛uv膠系列產品使用方便、固化速度快、粘接強度高，具有良好的光學性能，可用於粘接、密封、固定和填充，適用基材廣泛，如玻璃、金屬、塑膠等。
  17. Adhesives for tiles - determination of tensile adhesion strength for cementitious adhesives

    瓷磚膠粘劑.混凝土膠粘劑粘接強度的測定
  18. Adhesives for tiles - determination of shear adhesion strength of reaction resin adhesives

    地磚膠粘劑.反應樹脂粘接劑的剪切粘接強度的測定
  19. The curing time of the modified pf resin and the adhesive strength and emission of formaldehyde of the plywood bonded with this modified pf resin was measured in this paper

    結果表明:紫膠改性酚醛膠的固化時間與普通酚醛膠接近，粘接膠合板的粘接強度達到類膠合板的要求，膠合板的甲醛釋放量降低。
  20. Physical testing of rubber - determination of rubber to metal bond strength - adhesion to rigid substrates - 90 peel method

    橡膠物理試驗.第a21部分:橡膠對金屬粘接強度測定.第1節:對硬物質粘接. 90度剝離方法
分享友人
分享到 Line

分享到臉書