自轉矩 的英文怎麼說

中文拼音 [zìzhuǎnjǔ]
自轉矩 英文
self torque
  • 自 : Ⅰ代詞（自己） self; oneself; one s own Ⅱ副詞（自然;當然） certainly; of course; naturally; willin...
  • 轉 : 轉構詞成分。
  • 矩 : 名詞1. （畫直角或正方形、矩形用的曲尺） carpenter's square; square2. （法度; 規則） rules; regulations 3. [物理學] moment
  • 自轉 : revolve on its own axis; rotation; revolution; autorotation; windmilling; spin
  1. In this dissertation, through computer simulation, the problems of modeling, control and guidance of auvs are presented. the first part of this dissertation addresses the problem of dynamically modeling of auvs, and derives thrusters " two - dimension nonlinear dynamic model, which has axial flow speed and propeller rotational velocity as two state variables, voltage or current of motor as inputs, and thruster force and torque as output. the second part focuses on the nonlinear adaptive sliding mode control of auvs in diving plane and steering plane

    本論文系統研究了自主式水下航行器的建模、非線性自適應滑模控制、以及深度調整和水平面導引方法等問題，具體成果和創新點如下1 、根據流體力學理論，建立了螺旋槳推進器的動態模型，它以螺旋槳來流速度v _ p和螺旋槳轉速n為狀態變量，以電機施加轉矩為輸入，螺旋槳推力t和轉矩q為輸出。
  2. The torque motor received dc current signals from the electric control and applies torque to the single - piece armature and flapper which is supported on a torsion flexure

    力矩馬達接收來自電氣控制器的直流電信號並將力矩施於由轉矩撓曲支撐的整體式電樞及擋板。 ？
  3. Lack of orthogonality between a suspension(or centering)axis and the spin axis will then result in a drift-producing torque exerted on the gimbal.

    懸掛軸和自轉軸間的不垂直度將引起產生漂移作用在框架上的力矩。
  4. The experiment can obtain the driver and the torsion of the screw propeller of relative speed and is an important method to analyze the efficient part of push

    船模自航試驗可獲得對應航速螺旋槳推力和轉矩，是分析各種推進效率成分的重要手段。
  5. This research task used industrial controlling computer as the hardcore of the automatic testing system, and the other electrical parameters testing instrument were used as the subordinative equipment of the automatic testing system

    本研究課題採用工控機作為自動測試系統的核心控制設備，其他各種由單片機組成的電參數測試儀、電阻測試儀和轉矩轉速測試儀以及西門子變頻器等設備組成測試系統的從屬設備。
  6. For the bldcm which has a pseudo - sinusoidal back - emf waveform, this dissertation presents a svpwm control method using six discrete position signals for minimizing the torque ripple. the main aspects for the implementation of this method are analyzed, including the initial orientation of the voltage vector, reasonable choice of the impedance angle and the advance commutation angle, and estimation of the successive rotor positions

    針對反電動勢類似正弦的準正弦波反電動勢無刷直流電動機，本文提出一種基於六個離散位置信號的自同步svpwm （電壓空間矢量法）控制方法，用以削弱電磁轉矩脈動，分析了實現這種方法的主要控制環節，包括起動時電壓空間矢量的初始定位，阻抗角與電流超前角的合理選擇以及連續轉子位置的估計等。
  7. Furthermore, this dissertation also gives a comprehensive analysis and comparison to the torque ripple factor, torque - current ratio and other aspects for pseudo - sinusoidal emf bldcm drived by 120 conduction mode, 180 conduction mode and self - synchronous svpwm mode respectively. the simulation and the experimental results indicate that self - synchronous svpwm method is more effective for minimizing the torque ripple without any expense of the torque - current ratio when the crest width of the back - emf waveform is less than 107 electrical angles

    對準正弦波反電動勢無刷直流電動機在120導通方式、 180導通方式和自同步svpwm三種控制方式下的轉矩脈動系數、轉矩電流比等方面進行了全面的分析與比較，模擬研究和實驗結果表明，當反電動勢的平頂寬度小於107電角時，採用自同步svpwm控制方法可以在不損失轉矩電流比的基礎上，更有效地抑制電磁轉矩脈動。
  8. Promax tension ind corp has long sold and manufactured a variety of custo mized air shafts / air chucks / safety chucks, edge position control systems / epc, powder / air / disk brakes and clutches, ac / dc motor control systems, re - winding / un - winding systems, tension control systems, web inspection systems, automatic color register systems, servo - vector control systems, mmi interface and supervisory control and data acquisition ( scada ) systems and others such as slitting, winding, laminating, extruding, coating, and gravure printing machines, even other auxiliary devices etc. for webs such as paper, films, rubber, textiles and foils

    本公司長久以來已經從事製造及銷售有關紙類，薄膜，膠片，紡織品，橡膠等薄片卷材的捲筒物控制糸統周邊設備，諸如氣漲軸，氣漲/安全夾頭，邊緣追蹤器裝置，磁粉/氣壓/碟式煞車器及離合器，交直流轉矩馬達控制系統，收放料車動系統，張力控制裝置，印刷機靜態觀測器，自動套色控制裝置，伺服向量控制系統，人機介面及監控系統及其他有關印刷，貼合，分條，復? ，塗布，上膠，押出，淋膜等產業機械
  9. Based on the basic analysis of the structure and power elements of the hybrid vehicle, this thesis presents a powertrain system with a metal pushing belt cvt, aiming to the development status and trend of the hybrid vehicle technology in our country. a rational control strategy and its work mode of this powertrain system are determined, and correlative parameters such as the engine power, the starting torque, and the differential ratio, the rated power and torque of the motor, and the ratio of the torque synthesizer are systematically designed for the changan star 6350b. at the same time, the design of these parameters is considered as the base of the simulation of the motor control system in next step

    在對混合動力汽車的結構型式和動力元件進行基礎性理論分析后，針對我國汽車技術發展現狀和混合動力汽車技術的發展趨勢，設計了一種基於金屬帶式無級自動變速器cvt混合動力汽車動力傳動系統方案，根據該傳動系統方案制定了比較合理的控制策略和工作模式，並針對長安之星6350b設計了發動機功率和起始轉矩、主減速比、電機的額定功率和轉矩、轉矩合成器速比等相關參數，為下一步的電機控制系統模擬實驗打下基礎。
  10. Combined with the peuliarity of pmsm, the pmsm starting - torque and starting - current are studied, analyze why we chose such a rotor ' s slot, at the same time, generalize how to calculate the resistance of the rotor

    第四部分結合永磁同步電動機的自身特點研究了樣機的起動轉矩和起動電流，並分析了樣機所選轉子槽形，同時得出永磁同步電動機< wp = 5 >轉子電阻的計算方法。
  11. This dissertation presents how to use the ultrasonic motor as an actuator to suppress the flutter of a two - dimensional airfoil section with a control surface. the ultrasonic motor, which features simple structure, high torque at low speed, small size, low weight and no electromagnetic contamination, is a promising actuator for the flutter suppression of small aircraft

    超聲電機以其結構簡單緊湊、轉矩/質量比大、低速大扭矩、直接驅動，動態響應快、斷電自鎖和不產生磁場且不受外界磁場干擾等優點，有望成為一種非常有前途的作動器，用於小型飛機的機翼顫振主動抑制。
  12. As compared with conventional electromagnetic motor, the ultrasonic motor possesses the following features : compactness in size, high - torque at a low - speed range, fast response, insensitive to magnetic fields, high holding torque when power is off and so on

    與傳統電機相比，它具有結構緊湊、低速高轉矩、響應快、不受磁場影響、斷電自鎖等優點，因而它適合應用於機器人、精確定位裝置、微型機械、航空航天器等方面。
  13. This second generation technology adds a converging diverging element to cybex dual axis technology s user defined path of motion. the versatility of this technology helps the everyday user or the serious trainer achieve greater results by delivering consistent torque throughout the range of motion to maximize the effect at the muscle, with less stress to the joint

    第二代雙軸技術于自我劃定的運動軌跡內加入聚合及分岔動作，使整個動作保持一致的轉矩，不單止能強化肌肉的鍛?效果，更可減低對關節的傷害，為每天進行訓練的用者和專業教練提供更勝一籌的鍛?效能
  14. In the simulation work, one 1. 5kw and one 18kw induction motors ? control system were simulated and two simplified control scheme were proposed. when developing the program in tms320f240 dsp, this paper solved two practical problems : the finite - length effect and dc bias effect. finally, sensorless control system based on adaptive filter theory are tested on the platform of 1. 5kw induction motor, the results show that the scheme ? performance is good

    在模擬過程中，針對1 . 5kw和18kw異步電機進行了模擬，並在此基礎上提出兩種簡化控制方式；在tms320f240的具體編程過程中，分別對自適應濾波器的有限字長效應、直流偏置效應等非理想因素進行了修正和補償；最後，在1 . 5kw微型異步電機上進行了轉矩閉環無速度傳感器實驗，實驗結果表明了演算法完全可以達到預期的目標。
  15. Taking dc motor test as an example, a creative idea of applications of some advanced signal processing tools, such as time - frequency analysis, wavelet, and instantaneous frequency ( if ) evaluation, in motor testing field is presented. the paper systematically summarizes basic theories of time - frequency analysis and wavelet transform based on which an in - depth research of effective if evaluation based on wavelet ridge and wavelet curve is carried out. in the end a fast t - n characteristic testing system with neither torque nor speed sensor is successfully developed

    本論文主要關注小波分析在電機性能自動測試系統中的應用，針對傳統電機測試系統以及信號處理技術在電機測試領域中應用的不足，以直流電機為例，提出了將時頻分析、小波包變換以及基於小波脊的瞬時頻率提取方法應用到電機測試領域的新思路；較系統地總結了時頻分析和小波變換的基本理論，深入探討了基於小波脊線和小波曲線的瞬時頻率提取，並成功開發了基於正交小波包分析和基於小波脊線的瞬時頻率提取的無轉矩轉速傳感器的直流電機快速測試系統。
  16. After the mathematical model of asynchronous electromotor is build, the method of space voltage vector is taken to discuss the essential principle and structure, and arithmetic of direct torque control, and the application of circular magnetic chain self - operated control and the technology of sensor without velocity in direct torque frequency conversion timing are emphasized

    在建立異步電動機的數學模型之後，採用空間電壓矢量分析方法討論了直接轉矩控制的基本原理結構及其演算法，著重研究了圓形磁鏈自控制和無速度傳感器技術在直接轉矩變頻調速中的應用。
  17. In the researches about hexagon track, smith triggers are used, so is flux self - control. as to round track, the method of voltage vector selection is taken. we can select the proper voltage vector by the position and magnitude of stator flux as well as the magnitude of torque

    在六邊形磁鏈的研究中，本文主要是使用了施密特觸發器，通過磁鏈自控制單元來實現的；而對于圓形磁鏈的直接轉矩而言，則是利用了電壓矢量查表的方法，通過實時判斷磁鏈的區間和幅值、以及轉矩的大小，繼而從表格中選擇合適的電壓矢量。
  18. The gate - motor syste m of the elevator is also discussed in rough as the research background. this paper also does some work about the self - adaptation function in the dtc - system and brings forward self - adaptation - system on software according to the requests of the gate - motor system

    本論文以電梯門機系統作為應用背景，對其作了大致的介紹；並按照門機系統的工作要求，對帶有自學習功能的直接轉矩控制系統作了探討，並根據應用背景建立了相應的自適應系統。
  19. Aim at the dtc ' s blemish mentioned above and the direction of dtc technique development, the dissertation put great emphasis on the work as follows, with an eye to exalt dtc system function : ( 1 ) a new speed - flux observer of an induction motor is proposed to enhance the accuracy of flux observing, which is an adaptive closed - loop flux observer and different from the traditions. a new adaptive speed - observation - way is deduced out according to the popov ' s stability theories ; ( 2 ) to improve the performance of dtc at low speed operation, we have to exalt the accuracy of the stator flux estimation and a new way of bp neural network based on extended pidbp algorithm is given to estimate and tune the stator resistance of an induction motor to increase the accuracy of the stator flux estimation ; ( 3 ) digital signal processor is adopted to realize digital control. an device of direct torque control system is designed for experiment using tms320lf2407 chip produced by ti company ; ( 4 ) bring up a distributed direct torque control system based on sercos bus, sercos stand for serial real time communication system agreement which is most in keeping with synchronous with moderate motor control ; ( 5 ) the basic design frame of the hardware and software of the whole control system is given here and some concrete problem in the experiments is described here in detail

    針對上面提到的直接轉矩控制的缺陷和未來直接轉矩控制技術發展方向，本論文重點做了以下幾個方面的工作，目的在於提高dtc系統的綜合性能： （ 1 ）提出一種新型的速度磁鏈觀測器，新型的速度磁鏈觀測器採用自適應閉環磁鏈觀測器代替傳統的積分器從而提高磁鏈觀測的精度，並且根據popov超穩定性理論推導出轉速的新型自適應收斂律； （ 2 ）改善系統的低速運行性能，主要從提高低速時對定子磁鏈的估計精度入手，提出了一種提高定子磁鏈觀測精度的新思路? ?利用基於bp網路增廣pidbp學習演算法來實時在線地修正定子電阻參數； （ 3 ）採用數字信號處理器dsp實現系統全數字化硬體控制，結合ti公司生產的tms320lf2407晶元，設計了直接轉矩控制系統的實驗裝置； （ 4 ）提出了基於sercos總線網路化分散式的直接轉矩控制系統， sercos （ serialrealtimecommunicationsystem ）是目前最適合同步和協調控制的串列實時通信協議； （ 5 ）基本勾勒出整個控制系統的硬體和軟體設計基本框架，詳細描述一些實驗中的具體的細節問題。
  20. Third, since the positioning torque electrical motors, precision and error accumulation

    三步進電機的自定位轉矩精度及誤差累積？
分享友人
分享到 Line

分享到臉書