負載作用點 的英文怎麼說

中文拼音 [fùzǎizuòyòngdiǎn]
負載作用點 英文
loading point
  • 負 : Ⅰ名詞1 （負擔） burden; load 2 （虧損） loss 3 （失敗） defeat Ⅱ動詞1 [書面語] （背） carry on th...
  • 載 : 載Ⅰ名詞（年） year : 一年半載 six to twelve months; six months to a year; 三年五載 three to five ...
  • 用 : Ⅰ動詞1 （使用） use; employ; apply 2 （多用於否定: 需要） need 3 （敬辭: 吃; 喝） eat; drink Ⅱ名...
  • 點 : Ⅰ名詞1 （液體的小滴） drop （of liquid） 2 （細小的痕跡） spot; dot; speck 3 （漢字的筆畫「、」）...
  • 負載 : [電學] load
  1. This thesis focuses on middleware - based load balancing supported by corba, and has made the following contributions : ( 1 ) based on the previous research, we give a method using resource utilization and harmonic mean performance to quantify the load of each node in the heterogeneous environment, which makes the loads comparable

    本文的主要研究內容就是基於corba中間件的負載均衡，具體的研究工作有以下幾點：探討了系統負載的衡量問題，借鑒前人的研究成果，採用以資源利用率和節點的調和性能平均值來綜合衡量系統負載的方法，量化了異構系統中各節點的性能，使得負載具有可比性。
  2. Based on the special load of the contactless system, this paper analyses and contrasts the principle and feature of the series and parallel resonance circuit. design the high frequency full - bridge series resonance converter and make the main circuit apply to the contactless electrical power deliver system and analyses the process of the main circuit in detail

    根據無接觸電能傳輸系統特殊的負載特性，詳細分析並對比了並聯和串聯逆變器的工作原理及電路特點，設計出應用於無接觸系統中的高頻全橋串聯諧振逆變器的拓撲結構，進而設計並製作了系統的主電路，詳細的分析了主電路的工作過程。
  3. But the grid voltage is different in many countries, so the research of an inverter, which can be used in many countries, will become a trend. a grid - connected inverter in grid - tied and off - grid modes has many advantages such as peak shaving to reduce the overall cost of power by generating during peak load hours in grid - tied mode, and standby generation to provide power during system outages until service can be restored in off - grid mode

    由於世界各國電網電壓的規格繁多，能夠研製出適合於多個國家電網電壓規格的逆變器將是未來發展的一種趨勢;獨立與並網雙模式運行的逆變器由於具有緩解電網用電緊張、減少發電站的發電量、在電網斷電時對負載起不間斷供電的作用等優點，也成為現在研究的一個熱點。
  4. By comparing and analyzing the advantages and disadvantages of three kinds of voltage reference circuits, type of current density ratio compensation 、 weak inversion type and type of poly gate work function, a cascode structure of type of current density ratio compensation is chosen to form the core of voltage reference circuit designed in this paper. applying the negative feedback technology, an output buffer and multiply by - 2 - circuits are designed, which improve the current driving capability

    然後通過比較和分析電流密度比補償型、弱反型工作型和多晶硅柵功函數差型三種帶隙電壓基準源電路結構的優缺點，確定了電流密度比補償型共源共柵結構作為本設計核心電路結構，運用負反饋技術設計了基準輸出緩沖電路、輸出電壓倍乘電路，改善了核心電路的帶負載能力和電流驅動能力。
  5. During this course, mathematic methodology and graphic tables got from the real emulating environment are employed to put my point of view through. i try to upgrade some of the function in this system by adding new ideas into the opening subsystem nqs, including load distributing and resource management among the machine group

    並對作業管理系統中目前很多研究機構還在開發的集群負載均衡技術、資源管理技術進行嘗試拓展，在闡明觀點的時候，作者使用了數學的表示方法、實際試驗圖表等輔助手段說明作者理解。
  6. This text has analysed load balancing method of existent especially lvs cluster system and recommended the net packet and netfilter ’ s frame structures in the linux operating system ; it has compared the cooperative - type - cluster with tradictional cluster in the net packets ’ queue ways and with active cluster in the load balancing dispatcher way, which has reflected the superiority of cooperation type cluster ; the three major parts of the cooperative - type - cluster have been designed and realized in this text, which includes sync packets ’ priority service for dmcs 、 “ priority and avoid sudden load unbalance ” dispatch way at the cooperation of nodal servers and director and active nodal server which ensure cluster normally running when cluster join or rduce node server ; the cooperative - type - cluster ’ s control frame controlled by homepage has been constructed ; the mulit - services cluster system has been realized ; this text has used the existing server pressure testing tools to test the cooperative - type - cluster and lvs cluster, then has comparaed and analysed the two

    本文分析了現有服務器集群特別是lvs集群系統的負載均衡方法，介紹了linux系統下的報文和netfilter的框架結構;將所提出的合作式集群與傳統集群在報文排隊方式上進行比較，與主動式集群在負載均衡調度方式上進行比較，體現了合作式集群的優越性;設計並實現了合作式集群體系結構的三大部分:針對分散式測控系統的加權服務、負載均衡器與節點服務器合作式「加權防突」負載調度、保證集群運行不受加減節點干擾的主動性真實服務器;構建了通過網頁界面控制合作式集群的控制框架;實現了一個可運行的合作式多服務集群系統，運用現有服務器壓力測試工具對合作式集群和lvs集群進行負載測試，並對測試結果進行比較分析，同時通過壓力測試實現加權服務。
  7. Flux position & error in flux magnitude and error in torque are used as fuzzy state variables. fuzzy logic is used for choosing the switching state. a fuzzy logic controller can choose the switching states according to a set of fuzzy rules based on both specialists " experience and knowledge, which improves the response performance of the system effectively during start - up and change in load

    作為本文的一個創新點，針對普通的直接轉矩控制在給定轉矩躍變時反應較慢的缺點，提出了一種模糊控制器，把磁鏈位置、磁鏈誤差和轉矩誤差作為模糊輸入變量，應用模糊邏輯來確定逆變器的開關狀態，該模糊控制器根據一套基於專家經驗和知識的模糊規則來選擇開關狀態，從而有效地提高了系統在啟動和負載突變時的響應速度。
  8. According to the fact that power factor of low voltage power networks is very low in china and field bus technology is developing in the world, in order to enhance power factor of low voltage power networks, on the basis of central transmitting and controlling information among every compensation equipment, the author of this dissertation studies systematically the design principles of power factor dynamic compensation system. based on analyzing structure of control system at present, the author of the dissertation puts forward a distributed completely and multi - layer structure framework based on field bus technology and builds a power factor intelligent dynamic compensation system. the functions of compensation unit, intelligent node, host computer, are presented

    根據目前低壓電網用電負載功率因數偏低和國內外現場總線技術的應用現狀，立足於提高交流電機的功率因數，基於將每個補償裝置進行集中監控、信息集中傳遞的思路，本文作者在分析現有的控制系統體系結構的基礎上，提出了基於現場總線技術的全分散式多層控制系統的體系結構，構建了功率因素智能動態補償系統；對補償執行單元子系統、智能節點子系統、上位機子系統三部分進行了功能分析。
  9. The thesis has done the widespread investigation and study to the domestic and foreign ’ s technologies of analogy low voltage and low power, and analyzes the principles of work, merts and shortcomings of these technologies, based on the absorption of these technologies, it designs a 1. 5v low power rail - to - rail cmos operational amplifier. when designing input stage, in order to enable the input common mode voltage range to achieve rail - to - rail, it does not use the traditional differential input pair, but use the nmos tube and the pmos tube parallel supplementary differential input pair to the structure, and uses the proportional current mirror technology to realize the constant transconductance of input stage. in the middle gain stage design, the current mirror load does not use the traditional standard cascode structure, but uses the low voltage, wide - swing casecode structure which is suitable to work in low voltage. when designing output stage, in order to enhance the efficiency, it uses the push - pull common source stage amplifier as the output stage, the output voltage swing basically reached rail - to - rail. the thesis changes the design of the traditional normal source based on the operational amplifier, uses the differential amplifier with current mirror load to design a normal current source. the normal current source provides the stable bias current and the bias voltage to the operational amplifier, so the stability of operational amplifier is guaranteed. the thesis uses the miller compensate technology with a adjusting zero resistance to compensate the operational amplifier

    本論文對國內外的模擬低電壓低功耗技術做了廣泛的調查研究，分析了這些技術的工作原理和優缺點，在吸收這些技術成果基礎上設計了一個1 . 5v低功耗軌至軌cmos運算放大器。在設計輸入級時，為了使輸入共模電壓范圍達到軌至軌，不是採用傳統的差動輸入結構，而是採用了nmos管和pmos管並聯的互補差動輸入對結構，並採用成比例的電流鏡技術實現了輸入級跨導的恆定;在中間增益級設計中，電流鏡負載並不是採用傳統的標準共源共柵結構，而是採用了適合在低壓工作的低壓寬擺幅共源共柵結構;在輸出級設計時，為了提高效率，採用了推挽共源級放大器作為輸出級，輸出電壓擺幅基本上達到了軌至軌;本論文改變傳統基準源基於運放的設計，採用了帶電流鏡負載的差分放大器設計了一個基準電流源，給運放提供穩定的偏置電流和偏置電壓，保證了運放的穩定性;並採用了帶調零電阻的密勒補償技術對運放進行頻率補償。
  10. The authour investigate the dosing conditions and effect of the pac to the huanghe water - source, which includes the following four parts : the selection of the pac ; the confirmation of dosing scheme and effect of the pac ; the research of application of potassium permanganate in combination with pac ; the research of the pac ' s modification and the modified effectiveness. the experiment is mainly carried out on the pilot system in the jieyuan water plan of tianjin. the results of the reseach include the following : l ) the pac from zunhua plant is selected as the better carbon for the source water of tianjin through the experiment ; 2 ) through the pilot experiment we conclude that the pac ' s best adding point is the mixing tank and the better dose is 10mg / l, on which the codmn of filtered water can be decreased to 40 % and the effluent have no problem of odour and color ; 3the adsorbing experiment show that pac mainly adsorb the organic matters which molecular wt., distribution between 500 and 3000, and can adsorb organic matters whose molecular wt., distribution are bigger than 6000 if the dose of it is adequent ; 4 ) pac together with potassium permanganate can remove the organic matter more effectively than each of them alone, and reduce the rising trend of turbidity of the flotation ' s effluent due to adding pac ; 5 ) the thesis made a research on the surface properties and the adsorbing capability of the modified carbon by oxidizer : the modified carbon with 20 % h2o2 can remove more organic pollutants than the untreated one by 12 % when we add a higher dose of coagulant ; 6 ) the modification of reduction and loading metal ions are also sttldied, and drow the following conclusions : the modified carbon with 5 % ammonia can enhance the organic matter ' s removal effectiveness by 10 % to the tianjin source water than the untreated one, and the modified one with loading metal ion remove the organic matters from the tianjin source water better ( 8 % ) than the untreated one due to the strong affinity betwween the humic acid and copper ion

    本文的實驗主要是在天津芥園水廠的中試系統上完成的，論文的成果和結論主要包括： 1 ）通過靜態實驗選定河北遵化活性炭廠生產的煤質炭為適合天津原水的炭種； 2 ）中試實驗確定粉末活性炭的較佳投加點為混合池投加，較佳投加量為10mg l ，此時可使濾后水的cod _ （ mn ）降低40 ，且可較好地控制濾后水的嗅味和色度； 3 ）初步確定粉末活性炭對原水中有機物的吸附主要集中在分子量在500 - 3000范圍內，投量增大時可吸附部分分子量大於6000的有機物4 ）中試實驗表明：粉末活性炭與高錳酸鉀聯用可取得較兩者單獨應用時對有機物更好的去除效果，且對因投加粉末活性炭而造成的氣浮出水濁度升高有一定的改善作用； 5 ）研究並初步確定氧化改性對粉末活性炭表面性質和有機物的去除效果的影響：粉末活性炭的氧化改性會使其表面的酸性官能團大量增強，表面極性增加；經20的過氧化氫改性的活性炭在增大混凝劑投加量（ fecl _ 3投量為15mg l ）時對有機物的總體去除效果較原活性炭提高12 ， 1次氯酸鈉改性活性炭對有機物的去除效果較原活性炭提高6 ； 6 ）研究並初步確定還原改性、負載金屬離子對原水中有機物的去除效果的影響：經5氨水改性的活性炭可提高天津源水中有機物的去除率達到10 ；負載銅離子后的活性炭可提高對腐殖酸類物質的去除能力，一般可提高8左右。
  11. It is difficult to replicate hinge moment accurately and rapidly because surplus torque affect dynamic performances of load simulator system badly with large intensity and continuous variation derived from variable velocity of rudder system

    這種干擾作用具有強度大、隨舵機速度不同連續變化的特點，它的存在嚴重影響了負載模擬器的動態性能，使得加載系統難以準確、快速地復現空氣動力鉸鏈力矩。
  12. Through study of match of the system with load, the paper suggested thin hole as damping parts which can make system working in optimal working site and efficiently converting wind energy to heat energy

    通過對系統與負載匹配的研究，提出採用薄壁孔元件作為阻尼元件可使系統始終工作在最佳工作點有效地將風能轉化為熱能。
  13. The multipath olsr protocol will calculate all of possible paths from the source node to destination node. then, it should select one of paths with less congestion nodes for the second path. the paper has designed an effective algorithm of load assigned, to avoid overwhelming some central nodes in the network

    多路徑將選擇一條擁塞程度更輕的路徑作為備用路徑，這樣可以減輕中間部分擁塞節點的處理負擔，將網路負載分配到全網所有節點，即達到負載均衡的效果;二是為了提供qos業務而改進的olsr約束路由協議。
  14. With the application background of the development of pbc dalian branch " disposal information s ervice system ", the decision supporting subsystem of dalian international cooperating group information system and china life insurance company dalian branch " estimate and planning of market the decision supporting system ", paper applies itself to resolve the above conflict and problem, in order to enhance the self - adaptive of dw system, to implement integration optimization within dw and measure the users compatibility, and to get a self - adaptive dw system. during the process, it uses dw technology, dw quality, corba structure and agent technology. the content is below : ( 1 ) in order to decrease the development cost, to improve the multiplexing of components and to realize load balance and distributional calculation in larger range, paper studies and realizes the self - adaptive architecture of dw with the corba technology, agent technology and java programming language. as a result, the dw architecture get the ability of initiative, permanence and intelligence

    鑒於此，本文以數據倉庫系統面臨的問題與矛盾為研究背景，以中國人民銀行大連資金清算中心清分信息服務系統、大連國際合作集團決策支持系統、中國人壽保險公司大連分公司營銷決策支持系統評估與規劃等三個項目為應用背景，以強化數據倉庫系統的自適應性、在數據倉庫系統中進行聚集優化和度量數據倉庫用戶適用度，得到一個自適應的數據倉庫系統為目的，利用數據倉庫技術、數據倉庫質量、 corba結構以及agent技術，重點研究了以下內容： （ 1 ）為達到降低軟體系統開發成本、提高組件重用性、在較大范圍內實現平衡負載與分佈運算的目的，賦予數據倉庫體系結構主動性、持久性、智能性的能力，本文利用corba技術、 agent技術與java編程語言，研究並實現了數據倉庫自適應體系結構。
  15. In the present paper, according to the characteristics of the dynamic running of the thermoelectric refrigerating devices and its components for the refrigerator is analyzed and the independent components " models are established. the entire model describing the working procedure of the refrigerating system is set up with the method of parameters coupling to combine the models of the refrigerating system, load, cabinet and air in the cabinet. the running characteristics of thermoelectric refrigerators on the effects of received current, load and ambient temperature are investigated using small - signal linearization method

    本文根據熱電製冷系統動態運行的特點，分析了電冰箱製冷系統及各個部件的熱物理過程，運用參數耦合的方法把製冷系統、負載、箱體及箱內空氣模型有機地結合在一起，建立了完整的製冷系統工作過程模型，用小階躍信號線性化法分析了電流、負載功率和環境溫度波動共同作用下的熱電製冷器工作特性。
  16. In the design, we adopt the microsoft windows 2000 advance server operating system and the system design that combines the server cluster and the san. nlb technology is used to realize the load balance of all the nodes in the server, and the layout of streaming media data preserved on the disk arrays is realized by coarse - grained striping. windows media technology is introduced to help the application of streaming media

    在此設計中採用了服務器集群與存儲區域網路（ san ）相結合的系統設計，採用microsoftwindows2000advanceserver操作系統，利用網路負載平衡技術（ nlb ）實現服務器集群內各節點的負載均衡，採用粗粒度數據條紋化對磁盤陣列上存儲的流媒體數據進行布局，並使用windowsmedia技術實現流媒體應用。
  17. Dividing the workload involves using db2s mln functionality to set up the database instance with four logical nodes

    工作負載的劃分涉及利用db2的mln功能給四個邏輯節點安裝數據庫實例。
  18. The preamplifier will drive a low impedance load without alteration in the signal, in fact it can be used as a current source driving a 0 impedance mixer junction without any distortion

    這個前級放大器能夠驅動一個低阻抗的負載而不會引起信號的變化，實際上它可以用作一個驅動零阻抗混合節點，而又不產生任何失真的電流源。
  19. By close study on the average temperature rise, temperature distribution, and tune constant of the class f resin dry type power transformer ' s high voltage and low voltage winding under self - cooling and wind - cooling mode, we find out the connection between the variation of the load and the items, mentioned above. the results of the experiments can be reference to both thermal design optimization of dry type power transformer and the revision of current standards. meanwhile, we develop the software, which can predict the overload ability of the dry type power transformer

    本文對f級樹脂澆注式乾式變壓器的高、低線圈的平均溫升，內部溫度分佈和時間常數在自冷和風冷，兩種冷卻方式下隨負載變化的規律進行了研究，得出了平均溫升、熱點溫升和時間常數隨負載變化的相互關系和有關計算用參數和公式，試驗結果可作為改進乾式電力變壓器的熱設計的依據和對現行標準進行修改的參考。
  20. The working condition of nylon shaft liner is determined by many factors, for example : the different formula, shaping technique, the design of shaft liner, installation method, loading features, running speed, lubricant condition, the working environment of shaft liner temperature, humidity and the influence of impurity, abrasion when working etc. so, when designing shaft liner, it is necessary to take consideration of all conditions

    鑄型尼軸套的許用工作情況是由很多因素決定的，例如不同配方和成型工藝所制得的材料物理機械性能，軸套的設計裝配方法，負載特點，運轉速度，潤滑情況，軸套的工作環境溫度濕度雜質的影響，工作時的摩擦條件，對磨材料的性能等。因此，在設計軸套時，應綜合考慮各個方面的因素。
分享友人
分享到 Line

分享到臉書