載入狀態 的英文怎麼說
中文拼音 [zǎirùzhuàngtài]
載入狀態
英文
loaded state- 載 : 載Ⅰ名詞(年) year : 一年半載 six to twelve months; six months to a year; 三年五載 three to five ...
- 入 : Ⅰ動詞1 (進來或進去) enter 2 (參加) join; be admitted into; become a member of 3 (合乎) conf...
- 狀 : Ⅰ名詞1 (形狀) form; shape 2 (情況) state; condition; situation; circumstances 3 (陳述事件或...
- 態 : 名詞1. (形狀; 狀態) form; condition; appearance 2. [物理學] (物質結構的狀態或階段) state 3. [語言學] (一種語法范疇) voice
- 載入 : load
- 狀態 : status; state; condition; state of affairs: (病的)危險狀態 critical condition; 戰爭狀態 state o...
-
First, the theory of fretting wear and studies on fretting fatigue were introduced and the parametric method was used in the process of creating the model of dovetail joints in ug software. the elastic contact problem is analyzed in finite element method ( fem ) and is used to the parameters " distribution and contact stress of the joint are obtained on the base of ansys code. with the effect factor of load frequency, the prediction method of fretting fatigue life of dovetail joint under low and high / low cycle complex load is proposed
本文介紹了微動損傷的機理和微動疲勞壽命的研究方法;利用ug軟體對燕尾榫聯接結構創建了參數化實體模型;基於ansys軟體平臺求解彈性接觸問題,獲得了榫聯接結構接觸應力及接觸狀態量的分佈;在已有微動疲勞壽命預測模型的基礎上,引入載荷頻率影響因子,對低周、高低周復合載荷作用下的燕尾榫聯接結構進行了微動疲勞壽命的預測,與試驗結果對比表明採用本文提出的方法預測榫聯接結構的微動疲勞壽命是有效的。This text expanded the magnetoelastic stability issue of current - carrying component from coil, pole piece to thin current - carrying plates, and used special function to differentiate the critical state of losing magnetoelastic steady, the number value of getting the relevant parameter is solved. the text derives and provides the magnetoelastic movement equation of thin current - carrying plates, the geometry equations and the physics equations, the expression formula of lorent ’ s force, electro dynamics equation through the theory at first
本文將載流構件磁彈性穩定問題由線圈、桿件拓展到載流薄板,並引入特殊函數判別磁彈性穩定問題的失穩臨界狀態,得到了相關參量的數值關系。首先通過理論推導給出了載流薄板的磁彈性動力學方程,幾何與物理方程,洛侖茲力的表達式,電動力學方程。Empty affect refers to the frequency at empty electrical motors from lock - in normal circumstances to activate the pulse frequency
空載牽入頻率是指步進電機在空載情況下能夠從鎖定狀態正常啟動的脈沖頻率。S opened the door of the study and had disappeared before he had recovered from the painful and profound revery into which his thwarted vengeance had plunged him. the clock of the invalides struck one when the carriage which conveyed madame de morcerf away rolled on the pavement of the champs - elys es, and made monte cristo raise his head
復仇變成了泡影,使他陷入一種痛苦難受的恍惚狀態中去,在他還沒有從這種恍惚狀態中醒來,美塞苔絲已打開書房的門出去了,當馬車載著馬爾塞夫夫人在香榭麗舍大道上駛去的時候,殘廢軍人院鐘敲響了半夜一點的鐘聲鐘聲使基督山抬起頭來。The study in the paper starts with beam distortions, and it treats the plastic deformation area as pure bending sect, rest of the beam as rigid bodies. according to different shapes of the external tendons, it divides into three structural forms familiar in projects, that is the beams with no deviator, with a deviator and with two deviators, and studies the relation between the deformation of the external prestressing tendons and that of the beams, and derives the formulas of the ultimate stress increment of external tendons. in the formulas, the ultimate angle corresponding to half of the plastic deformation area is considered as a variable parameter
本文首先從梁極限狀態下的變形入手,將塑性鉸區看作純彎段,將塑性鉸以外的區域看作剛體,按照體外預應力筋的形狀不同,分工程中最常見的三種體外結構形式,即無轉向塊的直線型體外筋混凝土梁、具有一個轉向塊的單折線型梁和具有兩個轉向塊的雙折線型梁,研究體外預應力筋變形和梁體的變形間的關系,推導出以極限狀態下塑性鉸區之半對應的轉角為參數的計算體外預應力混凝土簡支梁以及連續梁的體外筋應力增量計算公式,並進一步求得梁的極限承載力。Some key issues in the modeling of a long span composite cable - stayed bridge are discussed such as cable tension, dead load, large deflection, concrete deck stiffness, concrete deck - steel girder connection, and boundary condition. some conclusion can drawn from the thesis : 1. the initial equilibrium configuration of the bridge is clarified in the thesis
本文深入討論大跨度結合梁斜拉橋"基準"有限元模型建立過程中的幾個關鍵問題並得到一些有意義的結論: 1 .明確斜拉橋在索初應力和恆載作用下的初始平衡構型? ?處于初始平衡狀態時的幾何位置,給出了其計算方法。In order to solve the default of the limited valid scope and discontinuity characteristic, introducing the state continuous conversion gene based on establishment of respective mathematics model for low and magnitude current scope, and integrate with them reasonably then having established the mathematics model of suitable whole scope and having solved present mathematics model existent problems
本文針對目前電弧爐負載數學模型存在的適用范圍有限、特性不連續等缺點,在建立了分別適合大、小電流區域運行特性的數學模型的基礎上,引入狀態連續轉換因子,將分別適合大、小電流區域運行特性的數學模型有機結合為一個整體,建立了適合全范圍的數學模型,解決了目前數學模型存在的問題。Thirdly, it simulated the pumping circuit & dividing circuit with the widely used software matlab / simulink. the displacement of the rod piston and the impact of hydraulic are analyzed in the different input flow ( frequency of pump ) and different reversing time. it found out the cause of hydraulic impact ( one - to - one incorrespondence between the response time of dividing circuit and the operation time of rod piston ), and gave some methods to weaken hydraulic impact. in the final part of the paper, the reliability of the theory analysis is further verified by the experiment of hydraulic system
首先在流變學原理的基礎上,深入分析混凝土在輸送管道內的流動狀態,得出混凝土泵的負載特性方程;然後根據功率鍵合圖的建模方法,建立泵送迴路和分配迴路的數學模型,並運用模擬軟體matlab simulink對泵送和分配迴路模型進行了模擬,分析了在不同的輸入流量(泵送頻率)和換向時間下,活塞桿的位移和系統的液壓沖擊情況,找到了引起液壓沖擊的根本原因(即分配迴路的響應時間(固定值)與活塞桿的運動時間(變化值)不相匹配) ,並提出了相應的改進方法。Abstract : based on the fuzzy mathematics, it establishes the rules of the fuzzy reliability design for the bolt - joint set, discusses the effect of pre - tighten force and the axial changing load on the set, and shows an example
文摘:將模糊數學理論引入可靠性設計中,考慮預緊力和軸向變載荷狀態的影響因素,建立螺栓聯接的模糊可靠性設計準則,並給出了設計實例。I had run out of undos so i loaded a previous stage and tried to cut the man and paste him over the messed up image ( not so well i must add ) and a bit later on i rubbed through certain areas with the eraser
我不得不拚命使用撤銷命令,使我能夠載入上一級的操作命令,把被我搞亂的男人的圖像恢復到原始狀態,並且用橡皮擦那些必要要擦的位置。Considering the similitude law for shaking table test, we study the test results and obtain some conclusions which are a ) generally, the silty soil in test box liquefies and the liquefied time has relation with the amplitude of acceleration, b ) when the intensity is on and above eight degree, the silty soil deposit will be liquefied dramatically, c ) the relationship of the pore water pressure is relevant to the cycle loading which represents when the cycle loading ranges from little to great, the relationship is represent as a concave curve, or else as a protruding curve and tends to stability. ( 3 ) based on the triaxial compression test and the resonant column test, some studies are made such as a ) the duncan - chang parameters of constitutive model, b ) the dynamic shear modulus ratio and c ) the damping ratio of the site soil deposits. in order to deal with the test data, a computer program is compiled
( 2 )利用小型振動臺進行了k _ 0固結狀態下粉土的振動液化模擬研究,通過分析正弦荷載作用下的試驗資料,驗證了粉土的孔隙水壓力增長模式的合理性;從微分方程推導了基於土體振動臺模型試驗的相似律,並從模型實體、孔壓時程曲線和相似律等方面做出了分析,得出了如下結論:在小型振動臺試驗中,模型箱中的粉土都發生了液化,液化的時刻和輸入加速度幅值有關,而對頻率的變化不太敏感;粉土在相當於8 9度地震烈度的加速度幅值作用下可能產生嚴重的液化;孔壓的增長曲線形狀與施加的荷載有關:當施加荷載為由小到大的形式時,曲線形狀為上凹的曲線;當施加荷載為等幅的正弦荷載或荷載幅值由大到小時,曲線形狀為上凸的曲線,且逐漸趨于穩定。The exportation resistance of a device work device with what link after loading the resistance s the certain connections for should satisfying, in order to prevent mount to load the appearance produce the obvious influence. with each other connect to say to electronics equipments, for example after signal connect the enlarger, ex - class to connect class, only behind first - degree importation resistance before larger than first - degree exportation resistance 5 - 10 times are above, can think the resistance to match good ; connect the box come saying, electronics tube the machine should choose to use with for the enlarger its output to carry the mark to call the resistance the box for, but transistor enlarger then have noing this restrict, can take officing why resistance of equal or approximate box
一件器材的輸出阻抗和所連接的負載阻抗之間所應滿足的某種關系,以免接上負載后對器材本身的工作狀態產生明顯的影響。對電子設備互連來說,例如信號源連放大器,前級連后級,只要后一級的輸入阻抗大於前一級的輸出阻抗5 - 10倍以上,就可認為阻抗匹配良好對于放大器連接音箱來說,電子管機應選用與其輸出端標稱阻抗相等或接近的音箱,而晶體管放大器則無此限制,可以接任何阻抗的音箱。By analysing testing data, we do a study of relations between lateral swelling strain and water content, between lateral swelling strain and axial loading, and between swelling pressure and water content. 4
通過試驗資料整理分析,深入探討了膨脹巖的側向約束下軸向膨脹變形與含水率之間的關系、軸向膨脹變形與軸向荷載之間關系以及不同始末狀態膨脹壓力發展規律。Considering that the characteristics of our country ' s highway tunnels are always of long spans, tabular and of various geometry, by means of thorough analysis of the different problems existed in the design of support structures of the tunnels at present, this paper pays special attention to the two key problems, optimization method of form selection of structural section of the tunnel as well as the stability and bearing capacity of the support structures, in the design of the long and large tunnel on high - class highway, introduces the simplified complex - form optimum method in the structure optimization theory, discusses the optimum design model of lining section of highway tunnel with satisfying demands in building clearance, ventilation and load conditions, puts forward an optimization method of form selection of three different kinds of lining sectional forms ( i. e. single - center circle, three - center tabular circle and three - center sharp circle ), establishes a complete set of systematic optimum design the ory and method of long and large tunnel on high - class highway, develops the corresponding computer software used on the planned xuefeng mountain highway tunnel on shaoyang to huaihua expressway in hunan province for optimization of form selections of the structural sections, and obtains a series of relatively reasonable structural design parameters
本文針對我國公路隧道多為大跨度、扁平、幾何形狀呈多樣化的特點,通過深入分析目前隧道支護結構設計中存在的各種問題,抓住高等級公路長大隧道設計中隧道結構斷面的優化選型及隧道支護結構的穩定性與承載能力兩個核心問題,引入結構優化理論中的簡易復合形優化方法,深入探討了滿足建築限界、通風條件、受力狀態約束等條件下公路隧道襯砌斷面優化設計模型,提出了三種襯砌斷面形狀(單心圓、坦三心圓和尖三心圓)的優化選型方法,建立起一套完善的高等級公路長大隧道的系統優化設計理論與方法,並開發出相應的計算機程序,用於擬建的上海至瑞麗國道主幹線湖南省邵陽至懷化高速公路雪峰山長大高速公路隧道的結構斷面優化選型,得出了一系列較為合理的支護結構設計參數。Plc, robot and cad / cam are called the three major pillars in the modem factory automation. plc, as the head of the three, has become the leading basic automatic equipment in the field of the industry control in the early 1980s " but as a matter of fact, plc being with the lack of friendly man machine interface, rnakes no close relationship between human and machineometimes it even can not be promoted and applied in some fields aiming at the situation mat those imported products are too expensive while domestic products are of rare famous brands, a plc man - machine interface - plc monitor is developedthis paper systemically introduces the developing procedure for the whole system, including how to design hardware and software system. especially emphasizing plc communication protocol. real time message accessing, lcd controller instruction set, definition of data construction for message & tag screens and how to display thern, assignment of internal resource of cpuealization in software among plc & manitor, file format defining a nd download of user data, etcplc monitor will compensate some weakpoints of plc, and extend the application rangeimultanneously enhance the performance of plc and increase the attached value of mechanical machines, undoubtedly it will see hight market prospect
針對人機界面進口產品的高昂價格和國產品牌稀少的這一現狀,研製開發了一種plc人機界面? plc監控器。本文系統地介紹了整個系統的開發過程,包括硬體系統、軟體系統的設計及實現,重點介紹了plc通信協議,監控器的基本工作原理以及期望實現的功能,監控器電源電路、 sram存儲器掉電保護電路、 cpu監控器電路、按鍵輸入電路的設計及按鍵狀態的讀入,時鐘信息的設定與讀取, cpu液晶顯示器指令系統,信息畫面及標簽數據結構的定義及顯示方法, cpu內部資源的分配,監控器與plc通信的軟體實現,文件格式的定義以及畫面數據的下載等。 plc監控器彌補了plc一些方面的不足,可以擴大plc的應用范圍,提升機械設備的檔次,增加設備的附加價值,具有一定的市場前景。Thermal analysis result was imported into structural model and point - point contact elements were used to simulate contact state of different material, and displacement and stress field of nozzle was calculated under thermal loading and working pressure
導入溫度場分析結果,並用點點接觸單元模擬不同材料之間的接觸狀態,計算了溫度和壓力載荷聯合作用下噴管的位移場和應力場。Flux position & error in flux magnitude and error in torque are used as fuzzy state variables. fuzzy logic is used for choosing the switching state. a fuzzy logic controller can choose the switching states according to a set of fuzzy rules based on both specialists " experience and knowledge, which improves the response performance of the system effectively during start - up and change in load
作為本文的一個創新點,針對普通的直接轉矩控制在給定轉矩躍變時反應較慢的缺點,提出了一種模糊控制器,把磁鏈位置、磁鏈誤差和轉矩誤差作為模糊輸入變量,應用模糊邏輯來確定逆變器的開關狀態,該模糊控制器根據一套基於專家經驗和知識的模糊規則來選擇開關狀態,從而有效地提高了系統在啟動和負載突變時的響應速度。In the actual cases, there are many motors often operate on low load with low power factor and low efficiency, also there are many motors operate on the magnetic flux saturate region with high energy consumption, a large mount of energy used by ac motors is wasted due to all of those factors
在實際運行中,許多電動機經常處在低效率、低功率因數的欠載運行狀態下,還有許多電機則是鐵芯磁通常進入飽和區的高能耗電機,這些因素均可導致大量電能的浪費。Malfunctioning detection and management system and escape system are installed for the safety of astronauts. before the spacecraft enters the orbit, the conditions of the rocket will be closely and constantly monitored. if fatal problem occurs, the systems will help the spacecraft to leave the danger zones
故障檢測處理系統和逃逸系統是為確保太空人的安全而設,其作用是在飛船入軌前,監測運載火箭狀態,若發生重大故障,使載有太空人的飛船安全地脫離危險區。Based on survey data from some researches, dead load model and vehicle load model are presented in this paper. it is quite evidence that dead load model is gaussian distribution, and vehicle load is non - gaussian distribution, which operates general traffic and rush hour traffic states
本文在國內外各種調查資料的基礎上,分別引入恆荷載模型及車輛荷載模型,其中恆荷載呈正態分佈:車輛荷載則為非正態分佈,並將其分為一般運行狀態及密集運行狀態兩種情況,分別建立服役期最大值分佈函數。分享友人