通路線圈 的英文怎麼說

中文拼音 [tōnglùxiànjuān]
通路線圈 英文
closed coil
  • 通 : 通量詞（用於動作）
  • 路 : 1 （道路） road; way; path 2 （路程） journey; distance 3 （途徑; 門路） way; means 4 （條理） se...
  • 線 : 名詞1 （用絲、棉、金屬等製成的細長的東西） thread; string; wire 2 [數學] （一個點任意移動所構成的...
  • 圈 : 圈名詞1. （養豬羊等牲畜的建築） pen; fold; sty 2. （姓氏） a surname
  • 通路 : thoroughfare; highway; highroad; route; viae; lead; outlet; approach; passage; gangway; access; c...
  • 線圈 : [電學] coil
  1. It is, after all, well within the greater london conurbation, usually taken to be the area enclosed by the m25 london orbital motorway, which is on average about twenty miles from central london

    畢竟，這完全在大倫敦都市圈以內，通常是被m25號倫敦環線高速公路圍繞的區域，那裡平均起來距倫敦市中心大約二十英里。
  2. Based on 3 - d seismic well and logging data, mainly by means of advanced seismic theories of reservoirs prediction and other corelational multidisciplinary, an extensive and indepth studying on the tight sandstone reservoir with fracture of the second part of the xujiahe formation in west sichuan depression has been carried out. a series of theoretical viewpoints and research fruition are concluded as follows :. 1 on the basis of analysis of the regional and local structure characteristics and evolution, a conclusion comes in to being : inchoate and nowadays structure traps and the match model between structure and fracturation system are the main factors in controlling the formation of effective traps

    本文綜合利用三維地震、鉆井、巖心、測井資料，採用地震儲層預測方法為主線的多學科綜合研究思路對川西坳陷上三疊統須家河組二段緻密裂縫性砂巖儲層進行了較為廣泛、深入的研究和探索，取得以下一系列理論認識和研究成果： 1 、通過區域及局部構造特徵及構造演化史分析，認為古今構造圈閉、構造與斷裂系統配置關系是控制有效圈閉形成的主要因素。
  3. Using loading coils properly spaced in the line, the transmission distance for telephone reaches from new york to denver

    在電話線路中的適當位置使用加感線圈，從而延長了電話傳輸距離，實現了紐約到丹佛的有線通信。
  4. Undergraduate sports city is located in the center that the first radiate encircles shenzhen urban district, distance downtown makes an appointment with 15 kilometers, circumjacent area makes a road net not only concentrated, have 4 quick ways and 1 is passed in the orbit traffic line that build, more continuous and ceaseless immortal mountain, timbal mountain makes a natural green protective screen, the dragon mouth reservoir of overflow of green jade heave brings infinite lease of life

    大學生體育城地處深圳市區第一輻射圈的中心，距離市中心區約15公里，周邊區域不僅交通道路網密集，有4條快速路和1條在建的軌道交通線通過，更有連綿不斷的神仙嶺、銅鼓嶺構成一道天然的綠色屏障，碧波蕩漾的龍口水庫帶來無限的生氣。
  5. Eddy - current sensor conversion circuit consist amplification circuit, band - pass filter circuit, demodulation circuit, differentiation phase and data sampling circuit. these circuits are used to convert the test signal of eddy - current sensor to discrete signal tend to process. the microprocessor system that formed of dsp chip is used to data fitting of test system, data displaying and data communicating with personal computer, etc. the interference questions of hardware design and the measure of eliminating interference signal in the subject are introduced in the last of this chapter

    硬體電路的設計主要分三大部分來實現：激勵源電路部分，由分頻電路和頻率合成電路組成，產生頻率穩定的激勵信號以確保檢測任務的正常進行；傳感器變換電路部分，由放大電路、濾波電路、檢波電路、鑒相電路和數據採集電路組成，主要將電渦流傳感器檢測線圈檢測到的信號變換成只含有被測信息的離散信號，易於后續電路處理；由dsp晶元構成的微處理系統，主要完成檢測系統的數據擬合、顯示及與主機通信等功能。
  6. The problem about neutral - point - grounding mode is an all - around technical problem which associated with not only power system reliability ， insulation coordination ， electromagnetic interference ， but assault safety 。 in china ， the neutral grounding modes of the 10kv net involved of none grounding, grounding by arc suppressing coils, resistance grounding or reactance grounding in the past 。 with the development of civic power network ， low resistance grounding mode was used to restrain the over voltage, particularly in guangzhou, shanghai ， beijing ， and zhuhai etc. it was reported that the over - voltage level of low resistance grounding mode is lower than that of arc suppressing coil mode, but the operation carried out the other way 。 at substations in guangzhou and shanghai it was found that the low resistance grounding mode is successful 。 but in some areas ， such as zhuhai ， substations grounding with low resistance revealed some problems ， including power supply reliability rapidly dropping ， transmitting line often tripping ； and person safety being threatened 。 so interiorly the grounding mode selection of the 10kv network was disputed, which mainly focused on the fault form of 10kv net grounding, the apply area of suppressing arcing coil grounding mode, power supply reliability level of the two modes, person safety, communication interfere and the workload of maintenance

    爭議點主要是在10kv電網接地故障的形式、消弧線圈接地的應用范圍、兩種運行方式供電可靠性的高低、人身安全、通訊干擾和運行維護工作量等諸多方面。 11 17本論文就是針對以電纜為主的城區10kv電網中性點接地方式的選擇問題進行研究。論文首先對10kv電網的中性點運行各種方式進行分析，比較各方式的特點，然後以重慶儲奇門變電站10kv電網的實際參數來建立數值計算模型，在考慮了電網接地電容電流變化、中性點電阻取值大小、接地點接地電阻值變化等多種影響因素的情況下，對中性點經消弧線圈接地和經小電阻接地方式下電網的過電壓水平和接地點短路電流大小進行了數值計算，其計算結果與電科院所作現場試驗進行了比較。
  7. The bias magnetic field of the bias coil driven by bias current and small signal test current, results in the induced signal of the control coil. the terminal voltage of the control coil is detected by the test circuit. then the signal containing the information of rotor displacement is obtained, from which we can get the dc voltage signal proportional to the rotor displacement through half - wave rectification circuit and low pass circuit. this dc signal is put into a pid controller to get the control signal of the rotor displacement

    偏置測試電路向偏置線圈輸入偏置電流和小信號測試電流，兩者產生的偏置磁場在控制線圈產生感應信號，檢測電路檢測控制線圈端電壓並提取含有轉子位移信息的電壓信號，該信號經半波整流電路和低通濾波電路后得到與轉子位移成正比例的直流信號，再由pid控制器轉換為轉子位移的控制信號，最後控制信號輸入功放電路產生控制電流，實現閉環控制。
  8. Under windows nt and labview development environment, using the linear fit module, exponential fit module > general polynomial fit module of labview to design a method for fitting the experiment data, the results of curve fitting indicate that the purpose of general polynomial fitting is better than the rest. separating the equivalent input impedance of magnetostrictive transducers without stimulate current from input impedance of it with stimulate loop based on the results of curve fitting, and determining the syntony frequency and electric simulation network parameters of magnetostrictive transducers by this input impedance. finally, with labview network functions, realizing magnetostrictive transducer electric simulation system based on web server and discussing a scheme for this system network by datasocket. the method of this paper can more accurately determine the syntony frequency and electric simulation network parameters of magnetostrictive transducers than the testing method of syntony & anti - syntony. at the same time, discussing virtual instrument measurement system and how to realize magnetostrictive transducer electric simulation network system by labview network functions of network virtual instrument measurement development environment

    在windowsnt系統環境和labview虛擬儀器技術開發平臺下，首次利用labview中的直線擬合模塊、指數擬合模塊以及多項式擬合模塊，設計了一種對實驗所得數據進行曲線擬合的方法，對三種擬合方法進行了比較，曲線擬合結果表明，多項式擬合方法相對于其它兩種擬合方法效果更好；根據曲線擬合的結果可從帶激勵線圈的磁致伸縮換能器的輸入阻抗中分離出磁致伸縮換能器鐵芯在無激勵電流時機械振動形成的等效輸入阻抗，並由此輸入阻抗確定了磁致伸縮換能器的諧振頻率及其電氣模擬網路參數；最後通過labview提供的網路功能，實現了基於web服務器的磁致伸縮換能器電氣模擬虛擬儀器測試系統，並探討了通過datasocket技術實現該系統網路化的方案。
  9. Communication rules of the devices of surveillance and control system for expressway - part 2 : vehicle loop detector

    高速公路監控設施通信規程.第2部分:環形線圈車輛檢測器
  10. A measure of the induced voltage in a circuit caused by a magnetic flux and equal to the flux times the number of turns in the coil that surrounds it

    碰撞，匝鏈電路中由於磁通量而造成電伏減少的單位，等於穿過一載流線圈的磁通量與線圈匝數之積
  11. According to the actuality of the present research on ct, we bring forward a new design scheme based on the rogowski coil, in this design, the protection in short circuit failure and the measurement in normal condition are both fulfilled. it can also communicate with the computer through the communicating interface, sending the parameter of the system current and accepting the instruction

    本文在考察了國內外電流互感器發展現狀的基礎上，提出了一種基於rogowski線圈的電流互感器，該互感器具有正常電流的測量和短路故障時的保護功能，並且預留了與上位機的通訊介面，接受上位機的指令並向上傳送電網的電流參數。
  12. 1 ) the transformer leakage inductance will cause surge voltage across the switches. two clamp circuits are combined to solve this problem : lcd clamp circuit, in which the voltage across clamp capacitor is no reverse ; flyback clamp circuit, which consists of an additional flyback winding coupled with the boost inductor and a diode connected to the output terminal

    本文綜合了兩種箝位電路: 1 ） lcd箝位電路，箝位電容上電壓不反向; 2 ）通過增加一個與升壓電感耦合的反激線圈和一個連接到輸出電容的整流二極體，構成反激箝位電路。
  13. On - line monitoring of hvcb is the precondition of predicting maintenance, is the key element of reliable run, and is the important supplement to the traditional off - line preventive maintenance in fact, the faults are made by hvcb, no matter in number or in times, is over 60 % of total faults so it has determinative importance for improving the reliability of power supply and this can greatly decrease the capital waste used by - dating overhaul in this paper, the inspecting way of hvcb mechanism characteristic is discussed the concept of sub - circuit protector is presented, the scheme that we offered has been combined with sub - circuit integrality monitoring theory, to ensure that it has the two functions as a whole according the shut - off times at rated short circuit given by hvcb manufacturer, the electricity longevity loss can be calculated in each operation, and the remained longevity can be forecast too an indirect way for calculating main touch ' s temperature by using breaker shell temperature, air circumference temperature and breaker ' s heat resistance is improved in this paper, and main touch resistance can be calculated if providing the load current msp430, a new single chip microcomputer made by ti company, is engaged to develop the hardware system of the on - line monitoring device, and special problem brought by the lower supply voltage range of this chip is considered fully

    高壓斷路器所造成的事故無論是在次數，還是在事故所造成的停電時間上都占據總量60以上。因此，及時了解斷路器的工作狀態對提高供電可靠性有決定性意義；並可以大大減少盲目定期檢修帶來的資金浪費。本文論述了斷路器機械特性參數監測方法；提出了二次迴路保護器的概念，並將跳、合閘線圈完整性監視和二次迴路保護結合起來，給出具有完整性監視功能的二次迴路保護器實現方案；根據斷路器生產廠家提供的斷路器額定短路電流分斷次數，計算每次分閘對應的觸頭電壽命損耗，預測觸頭電壽命；提出根據斷路器殼體溫度和斷路器周圍空氣溫度結合斷路器熱阻來計算斷路器主觸頭穩態溫升的方法，並根據此時的負荷電流間接計算主觸頭迴路的電阻；在硬體電路設計上，採用美國ti公司最新推出的一種功能強大的單片機msp430 ，並充分考慮該晶元的適用電壓范圍給設計帶來的特殊問題；在通信模塊的設計中，解決了不同工作電壓晶元之間的介面問題，並給出了直接聯接的接線方案。
  14. In order to fulfill the protection more effectively in the short circuit failure, a new method based on the varying rate of the system current is developed. in order to get the virtual value of the system current, considering the characteristic of the rogowski coil output, a new integral method based on software is adopted and the traditional integrator is omitted

    為更好地實現短路電流的保護，本文針對rogowski線圈測量電流的特點，結合對短路電流變化規律的分析，提出了一種基於電流變化率判斷短路發生的新型判據，並通過模擬實驗對本文理論部分進行了初步的驗證。
  15. The finite element method ( fe '. i ) is adopted to analyze the effects of the numbers of coil turns, current intensity and current frequency upon the rate of joule heat generation in details. the thermo - radiation analytical countermeasures of various types are adopted to carry out the numerical analysis of the effects of the crucible with different shapes and sizes and the blind holes with different depths opened in the tops of crucibles as well as coil positions upon the thermal field distribution whereby solving the main problem of field the thermo - field design of the induction - heating sic crystal growth system. a new combination idea of the thermo - field design obtained by means of the united design of the thermo - insulator and blind holes has been presented

    採用有限元分析方法對線圈匝數、電流強度、電流頻率等對焦耳熱產生速率的影響進行了詳細的分析討論；採用不同的熱輻射分析策略，對不同坩堝形狀、坩堝頂部開設不同深度的盲孔以及線圈的位置等對熱場分佈的影響進行了數值分析，解決了感應加熱碳化硅晶體生長系統熱場設計的主要問題，提出了通過絕熱層與盲孔的聯合設計獲得所需熱場設計的思路，給出了根據軸向溫度梯度的波動對線圈位置實行動態調節以控制熱場的理論依據。
  16. By deenergizing of coil, control air moves the single - acting cylinder to the stop position through the pipe named “ supply ”, the double check valve ( pos. no. 72 - 2 ), the 3 - way magnet valve ( pos. no. 77, lower frame ) and the 3 - way valve ( pos. no. 78, lower frame )

    通過其線圈斷電，控制空氣移動單作用汽缸到停止位置通過supply管路，雙向截止閥72 - 2 ，三通電磁閥77下位和三通閥78 ，下位。
  17. By deenergizing of coil, the control air actuates the 3 - way valve ( pos. no. 29 through the pipe named “ supply ” and the 3 - way magnet valve ( pos. no. 73, right frame )

    由線圈的斷電，控制空氣促動三通閥29通過supply管路和三通電磁閥73右位。
  18. The shield is typically metal foil that is terminated to a pin connected to some low impedance point in the circuit

    屏蔽物通常為金屬線圈，該線圈被端接至連接到電路中某個低阻抗點的管腳上。
  19. 9. the reactor is soaked with epoxy and its coil is sealed by fiberglass cloth, the great mechanical stress caused by short circuit current in reactor will be carried by sealed material, so the reactor coil is provided with the feature of high endurance for short circuit current

    9 .由於電抗器採用浸漬環氧樹脂的無緯玻璃絲帶對線圈進行包封，在電抗器通過短路電流時所產生的巨大機械力由包封承受，從而使整個線圈具有極高的抗短路電流能力。
  20. Any combination ( usually adjustable ) of coils, capacitors, or resistors inserted in a transmission line or amplifier circuit to improve its frequency response

    任何一種由線圈、電容器或電阻組成的網路（通常是可調的） ，插入傳輸線或放大器電路中，用來改善頻率響應特性。
分享友人
分享到 Line

分享到臉書