鍋爐構造 的英文怎麼說

中文拼音 [guōlúgòuzào]
鍋爐構造 英文
boiler construction
  • 鍋 : 名詞1. （炊事用具） pan; pot 2. （裝液體加熱用的器具） boiler; cauldron3. （某些器物上像鍋的部分） bowl （of a pipe, etc. ）
  • 構 : Ⅰ動詞1 （構造; 組合） construct; form; compose 2 （結成） fabricate; make up 3 （建造; 架屋） bui...
  • 造 : Ⅰ動詞1 （做; 製作） make; build; create; produce 2 （假編） cook up; fabricate; concoct 3 [書面語...
  • 鍋爐 : boiler; furnace
  • 構造 : structure; construction; constructional detail; tectonic; structural; makeup; anatomy; constituti...
  1. This paper describes the structure, technical features and technical requirements of manufacture of a gasification stove with four contraposition burners on side walls, expatiates on its manufacturing process, key techniques and quality guarantee measures such as barrel formation, machining, assembly welding, heat treatment, subassembly secondary machining and precision detection

    摘要氣化爐是煤化工的核心設備，大慶油田金屬結構廠與哈爾濱鍋爐廠合作，為某大型石化企業製造了一臺側壁4個燒嘴對置式新型氣化爐，該氣化爐是目前國內同類產品中最大的氣化爐。
  2. The experimentation of cool and hot diagnosis reflected the structure and disposal of combustor, slag bonding and smirch of hearth are the main factors of hearth ' s outlet overheat and output of boiler decline

    冷、熱態診斷試驗反映出爐膛結焦、粘污及燃燒器的結構和布置等因素是造成爐膛出口煙溫偏高，鍋爐出力下降的主要因素。
  3. This article aims at the boiler ' s problems in operation : 1 ) under nominal load, the smoke temperature at the outlet of hearth reaches 1200, far more exceeds 1050 the original designed temperature. this will always result in slag inside boiler and the temperature of overheater ' s pipe superheat, so that boiler cannot take nominal load and all these influence boiler ' s nomal operation heavily, 2 ) this article also studied the reason why the assistant oil becoming necessary when coal changes. during the nomal operation, many factors ( makeup of combustor and its disposal, smirch and encrust of water wall, excessive air coefficient, temperature of primary air, coal type and density of coal dust ) can deviate the designed working conditions, then affect the boiler ' s nomal operation

    本文針對該鍋爐在實際運行中存在的問題：在額定負荷下，爐膛出口超溫、低溫段過熱器前煙溫高達936 ，遠遠超過815的設計值；噴燃器四周水冷壁結焦嚴重，過熱器管壁溫度超標，無法帶上額定負荷；甚至有時因燃煤質量的變化，必須投油助燃的嚴重情況進行了分析研究。在實際生產過程中，燃燒器的結構、布置，水冷壁的粘污、結垢，過剩空氣系數、一次風溫、煤種及其濃度變化等許多因素都會偏離鍋爐的設計工況，從而影響爐內的傳熱和燃燒，造成爐膛出口超溫、水冷壁結渣等問題。
  4. These appointed examiners, categorised into boiler inspectors and air receiver inspectors, carry out inspections and testings of any pressure equipment subject to registration and are responsible for scrutinising documents on design, construction, quality of fabrication and issuing certificates of fitness

    這些委任檢驗師分為鍋爐檢驗師和空氣容器檢驗師兩種。他們為須登記的壓力器具進行檢驗及測試，並負責審查有關設計、構造及裝配質素的文件，以及簽發效能良好證明書。
  5. Considering special form of the boiler frame, the reconstruction and enforcement method, in addition dynamic analysis are given by particular steps : establishment of the model of boiler steel frame, determination of earthquake loads and distribution form, and anti - side force system for the frame to model and analyze, involving loads on the frame and above it, earthquake loads, damping, sway control installation, hanging bar and plate beam

    考慮鍋爐構架鋼結構的特殊形式，研究並提出了電站鍋爐鋼結構改造加固研究方法，及動力分析的具體步驟：建立了鍋爐鋼結構動力分析模型、地震荷載分析方法、建立了鍋爐鋼結構布置型式、及整個鍋爐鋼構架抗側力體系模擬分析方法。具體包括：鋼構架本體及構架上荷載、地震載荷與阻尼系數確定、制晃裝置確定、吊桿與大板梁簡化。
  6. The reform scheme of no. 1 boiler in fengtai company is confirmed on the basis of cold / hot tests, theoretical discussions and calculations. in the process of field retrofit, it is indicated in the operation of the improved furnace that without the change of furnace structure, the transform of the burner angle has shrunk the tangential diameter and prevented flames burning on furnace walls, and the burning state of furnace has been bettered, simultaneously, lowering the slagging wi in furnace, thus laying sol id foundation for the safe and economic operation of generating units. wuyanrong ( power plant thermal power engineering ) directed by prof

    本論文通過冷、熱態試驗，經過論證和計算，確定了豐泰公司~ # 1爐燃燒器的改造方案，並進行了現場改造，改造后實際運行狀況表明：在無法改變爐膛結構的情況下，改變燃燒器角度，縮小切圓直徑，使火焰不貼壁，改善了爐內燃燒工況，同時降低了鍋爐結渣的程度，為機組的安全經濟運行奠定了必要的技術基礎。
  7. The characteristics of the production are with the high dissociation of parts, complexity of structures, long period of manufacturing, and high cost. in addition the manufacture needs high demands to the resource planning, ability in equilibrium, control of cost, consignment on time and so on

    巴威公司的鍋爐產品是根據客戶要求製造的，其部件生產的離散性強、結構復雜、製造周期長，成本高，對資源計劃、能力均衡、成本控制、按期交貨等提出了很高的要求。
  8. On one hand one can inquire more comprehensive conditions of steel construction, industrial plant construction or of industrial boilers or on the other hand of refuse incineration plants, waste incineration plants, waste heat boilers in addition to bridge sanitation and steam boilers and steam generators, under the number + 49 203 44 98 - 314 at thyssen kloenne gmbh

    Thyssen kloenne gmbh是一家高級企業，該企業針對客戶需求製造專門的廢熱鍋爐、余熱鍋爐，橋梁整修，蒸氣鍋爐和蒸氣機，垃圾焚燒設備，工業設備製造，工業鍋爐，鋼結構。
  9. Wear resistant layer of cylinder and double - layer liner in catalyst creaking apparatus ( without or with tortoiseshell net can be used ), inner liner of carbon monoxide exhaust - heat boiler, pouring at site for furnace roof with high temperature of heating furnace of steel rolling, different forging furnace, resistance furnace, the prefabricated parts can also be made

    催化裂化裝置中的筒體耐磨層及雙層襯里， （無龜甲網和有龜甲網均可採用）及一氧化碳余熱鍋爐的內襯，也適用於軋鋼加熱爐、各種煅造爐、電阻爐的爐頂、爐墻、爐底高溫部位的現場澆注，可製成預制構件。
  10. The object to study in this paper is the electric heat reservoir boiler, which is used to supply heat water and bask for the resident population. the use of the system define the character of the output medium with the lower request on quality and parameter, at the same time, it ask the boiler should has the higher character on the respect of the cost, reliability, economy, and so on. hence, the paper carefully design and study the system for the choice and design of the boiler core heating componet, the lay of the heat exchanger, the working status of the heat reservoir equipment, the adjustment and control mode of to supply heat water. the study work mainly include underside some contents, forexample : 1. to confirm the heat medium parameter to adapt the requirements of the most of the heating equipments and to design the instruction of the boiler and heat reservoir as simple as possible

    圍繞上述原則，本文從電熱鍋爐核心加熱元件的選型及設計、換熱面的布置、蓄熱設備的運行工況、供熱的調節方式以及控制方法進行了較細致的研究和計算，具體研究工作有以下幾個方面： 1 .根據使用要求，確定適用於多數採暖設備的熱介質參數，設計在結構型式上盡可能簡單的鍋爐和蓄熱器； 2 .對製造加熱元件電熱管的各種材料進行了對比和分析、在結構尺寸上進行了仔細的分析和計算，根據實際使用條件給出合理的設計，使其具有較高的可靠性和使用壽命； 3 .對不同換熱面布置形式進行傳熱分析。
  11. Considering materials and constructions style the computation for state mechanics on beam and column, and connection are made

    研究了電站鍋爐鋼結構材料及構造特性，並對電站鍋爐鋼結構梁、柱等構件進行了靜力分析與典型連接計算。
  12. Structure amp; amp; performance of vacuum hot water boiler

    燃氣真空熱水鍋爐的構造特點及工作特性
  13. The optimal control system of economical combustion is simulated by computer. and the theory of economical combustion and the reasons causing low heat efficiency are discussed in the paper. the sub - optimal feedback control system is proposed in which oxygen setting is controlled by a fuzzy controller

    對燃燒系統最優控制進行計算機模擬研究，分析了經濟燃燒的原理及造成鍋爐燃燒熱效率低的原因，構成了模糊控制含氧量給定值的閉環次尋優控制系統。
  14. These results show that since the existent defects of combustion device structure and its hypothetical circle of contact, these make a poor primary and secondary wind rigidity in operation and a too big actual circle of contact. in addition, the coal used is extreme prone to burn and reside in boiler. under such a condition, the coal powder ignites earlier in a short time and short distance when it leave the jet - combustioning device, and splashes the water cooler, eventually this results in a burned coal residue in boiler

    針對宏偉熱電廠410t / h燃煤鍋爐嚴重結渣問題，對燃煤的結渣性、爐內溫度工況及空氣動力工況等進行實驗研究，由於燃燒器結構和假想切圓選擇的缺陷，使得鍋爐在正常運行時，一、二次風剛性較差，實際切圓過大，加上目前燃用煤質屬于極易燃、易結渣煤質，致使煤粉在離開噴燃器很短的時間、較短的距離內開始著火，並沖刷水冷壁，最終造成爐膛結渣。
  15. It ` s suitable for the bend and deformation of the metal plates and it can roll the round and arcshapes and the cone ones within its specified ranges. it has the function of prebending the plate at both ends. the two lower rollers are the driving ones and can make the horizontal movement ; and the upper is a driven one and can make the up and down movement. the moving manner includes the mechanical and industry, boilers, shipbuilding, metal structure, machine manufacture and other trades, especially for the roll the steel trunks with smaller diameter and longer length in power transmission and trandform and other trades

    該機適用於金屬板材的彎曲成型，可卷制圓形，弧形和一定范圍的錐形工作，並有板材端部預彎功能，本機型兩個下輥為主動輥並可水平移動，上輥為從動輥上下移動，移動形式有機械式和液壓式，傳動軸均採用萬向連軸器連接，它廣泛適應于石油化工鍋爐造船金屬結構及機械製造行業，特別適用於送變電行業等直徑較小長度較長鋼管桿的卷制
  16. Type of boilers, operation and maintenance of boilers, water treatment, structure of boilers, steam and other properties of boilers, etc

    鍋爐種類、鍋爐的操作及維修、水處理、鍋爐構造、蒸汽及鍋爐特性等
  17. In this paper, the control system of industrial boiler widely used in industrial production was studied. aiming at the nonlinear object of industrial boiler with instability parameter and difficult building math model, combining fuzzy control theory and neural networks theory, a adaptive controller built with compensatory fuzzy neural networks to control industrial boiler is proposed

    本文對于目前在工業生產中廣泛應用的工業鍋爐的控制系統進行了研究，針對工業鍋爐這種具有非線性、參數不穩定、難以建立精確的數學模型的控制對象，結合模糊控制理論和人工神經元網路理論，提出用補償模糊神經網路構造自適應控制器實現對工業鍋爐的過程式控制制。
  18. Choice of steel types for the metallic construction and boiler making for brittle fracture hazard prevention

    防止脆性斷裂危險用金屬結構鋼和鍋爐製造用鋼的類型選擇
  19. The paper creatives associativing the actual situation in the theory, analyzing the features of the market, the structure of the enterprises in the trade, the complicated elements fomation the boiler developments include policies, technology, cost, international trade etc. the marketing competitive strategies include the relation marketing strategy, the product combine strategy, as a result of the study based on the trade analysis theory, the marketing competition theory, the core competitive cability theory

    本文在理論上結合實際進行研究創新，圍繞壟斷市場市場營銷的研究，以壟斷市場理論分析了市場具體的特徵，市場形成的各種因素，分析了電站鍋爐、工業鍋爐行業的競爭態勢，同時分析在營銷中相關復雜的政策、技術、成本、國際貿易等等因素對于營銷過程和實際結果的影響。運用產業分析理論、核心競爭力理論，結合鍋爐製造行業分析構建其市場競爭戰略、市場競爭策略。
  20. The factory was founded in 1958. it is the largest - sized manufacturer with the longest history to produce industrial boiler and utility boiler in shanxi province and has strong technological force as well as high class of products. it is one of the major enterprise of the mechanical ministry in shanxi province, and also an owner of manufacturing licence of b - class boiler and - class and - class pressure container as well as designing

    太原鍋爐廠於1958年建廠，是山西省規模最大，歷史最久，技術力量最強，產品等級最高的工業鍋爐和電站鍋爐生產製造廠，是機構部和山西省的重點企業，持有b級鍋爐製造許可證和一二類壓力容器製造許可證及設計許可證。
分享友人
分享到 Line

分享到臉書