預定轉速 的英文怎麼說

中文拼音 [yùdìngzhuǎnsù]
預定轉速 英文
desired speed
  • 預 : Ⅰ副詞（預先; 事先） in advance; beforehand Ⅱ動詞（參與） take part in
  • 定 : Ⅰ形容詞1 （平靜; 穩定） calm; stable 2 （已經確定的; 不改變的） fixed; settled; established Ⅱ動詞...
  • 轉 : 轉構詞成分。
  • 速 : Ⅰ形容詞（迅速; 快） fast; rapid; quick; speedy Ⅱ名詞1 （速度） speed; velocity 2 （姓氏） a surna...
  • 預定 : 1. （預先規定或約定） fix in advance; predetermine; schedule 2. [計算機] reserve
  • 轉速 : speed; revolution; rotation rate; speed of revolution; rotating speed; rotational speed轉速指示器...
  1. Angle contact ball bearing can be subject to both radial and axial load, it also can be subject to pure axial load, its axial load capacity is depend on the contact angle and increased accordingly. it can be used for high speed and high precision application dueto high limit speed and pre - adjustable rigidity

    角接觸球軸承可同時承受徑向載荷和軸向載荷，也可以承受純軸向載荷，其軸向載荷能力由接觸角決定，並隨接觸角增大而增大，且極限轉速較高，剛性大還可預調，適用於高速、高精度場合。
  2. At first we improve the methods of iris image preprocessing, including an efficient arithmetic of evaluation iris images, an improving method of locating iris, calibrating iris image by the translation of coordinate and the circular shift of code, a eatimate of the background illumination by bicubic spline, and the image enhancement by the dual tree complex wavelet transform. next we designed the recognition arithmetic based on the location of the local maxima of the wavelet transform modulus. in the thesis lots of simulation are performed by means of matlab and visual c + +

    首先改進了虹膜預處理方法，實現了一種快速高效的虹膜質量評價演算法;設計了一種改進的兩步虹膜定位演算法，準確的定位了虹膜的內外邊界;利用坐標轉換和編碼的循環移位實現了對虹膜圖像的配準;利用雙三次樣條函數擬合虹膜圖像背景，去除了非均勻光照對虹膜識別的影響;使用二分樹復數小波方法增強了虹膜圖像的對比度;在識別演算法方面，本文設計了一種「基於小波模極值點位置的虹膜識別演算法」 。
  3. Miraball is a powerful advertising tool, making use of the persistence of vision. when a row or several rows of ultra brighter wide angle led spins at 2000 - 2200rpm, the built - in cpu commands the led dots light up or go out at a very accurate pre - programmed sequence, the user ' s desired texts and wild miraculously appear and float inside a crystal - like ball to catch all eyes

    二：魔球是一實用新型的消費前沿動態廣告信息的發布媒體，內置微電腦晶元處理經個人電腦預先編輯后存於記憶體內的圖信息后，按非常精確的時序不斷點亮和熄滅，在一列或數更高速旋轉廣角發光二級管列陣中特定的點，在人眼視覺暫留作用下，用戶想要的圖文就會神奇地浮現在球體內360度的視覺空間中。
  4. Centrifugal clutch 18 is provided to mechanically couple power source 12 to work device 14 as the speed of input 15 of work device 14 increases to a predetermined speed wherein the need for the torque and speed conversion provided by non - grounded multi - stage transmission 22 become less necessary

    離心式離合器18設為隨著工作裝置14的輸入15的速度增加到預定速度時將動力源12與工作裝置14機械連接，此時逐漸不再需要非搭鐵多級變速器22提供的扭矩和速度轉換。
  5. This text completely and systematically studies the status and the development of the pyrolysis and the fluidization of biomass, which distill the bio - oil in the domestic and international area, as well as the existing problems. this thesis primarily include following aspects : ( l ), by experimenting and measuring the energy ( heat value ) and the content of c, h, n chemical element of right 20 kinds of common biomass, on the base of the experimental result, and respectively established the biomass energy predict experiment formula with the element of h and c is from change, and passed the ro. os examination, which provides the basis and convenience for flash pyrolysis fluidization device energy to convert the rate to compute with biomass energy utilization calculation ; ( 2 ), proceeded the tg and dtg experimentation equal velocity ( 10 ? / min, 20 ? / min, 40 ? / min, 60 ? / min ) heating and constant temperature heating by studying on eight kinds of biomass samples, according to the experimental data and arrhenius formula, we established the dynamics model of pyrolysis of, then, using the goast - redfern and p function, we also solved the dynamics parameters and analyze out every kind of biomass ' s frequency factor and parameters of activation energy, and established the every kind of dynamics model of pyrolysis of biomass, all of these provide the theories and basis to make sure the reactor ' s flash pyrolysis work temperature scope design and the describing of pyrolysis reactor dynamics ; ( 3 ), in order to study and ascertain the process of heat completely getting to pyrolysis time of varied size biomass particles, we observed and measured the ratio of length and diameter ( l / d ) with the varied biomass through electron microscope, we concluded the l / d ratios usually is from 5. 0 to 6. 0, the average is 5. 3 ; ( 4 ), we studied the process of biomass transiting and the theory of complete pyrolysis time with the theory of complicated heat field, we got the time ( t ) of the varied size biomass particles arriving to complete pyrolysis, and we knew that the complete pyrolysis time and the time which get to the biggest production ratio are identical, all of these studies provide the theory base for design and forecasting the flash pyrolysis reactor solid state resort time ; ( 5 ), according to the above experiment result, synthesize to make use of the engineering the mechanics, engineering the material, machine the design to learn the principle, deduce, establish the theory of rotation cone flash pyrolysis reactor material resort time ( t ) and reasonable rotation velocity ( or frequency ) relation theory ; and ( 6 ), we gave the reactor ' s smallest cone angle certain, reactor cone wall strength design theory, the reactor production ability theory, the power design method and the critical rotation velocity theory

    本文較全面、系統地綜述了國內外生物質熱解液化制取生物燃油技術研究發展現狀及存在的問題，主要研究內容有： （ 1 ）實驗、測定了20種常見生物質的能量（發熱量）和c 、 h 、 n元素含量，根據實驗結果分別建立了以h和c為自變量的生物質能量預測經驗公式，並通過r _ （ 0 . 05 ）檢驗；為閃速熱解液化裝置能量轉化率計算和生物質能量利用率計算提供了依據和方便； （ 2 ）選擇了8種生物質試樣作了等加熱速率（ 10 min 、 20 min 、 40 min 、 60 min ）和恆溫加熱的tg和dtg實驗，根據實驗數據和阿倫尼烏斯公式建立了生物質熱解反應動力學微分方程，並採用goast - redfem積分法和p函數對其動力學參數進行了求解，解析出各種生物質的頻率因子和活化能參數，進而建立了各種生物質的熱解動力學模型，為科學確定反應器的閃速熱解工作溫度范圍及熱解反應動力學描述，提供了理論和依據； （ 3 ）為研究和確定不同尺度的生物質顆粒中心達到全熱解的時間，在體視顯微鏡下對不同粒度的生物質顆粒的長徑比進行了實驗觀察和測定，得出生物質的長徑比（ l d ）一般在5 . 0 6 . 0之間，平均為5 . 3的結果； （ 4 ）採用復雜溫度場傳熱學理論對生物質傳熱過程及充分熱解時間理論進行了研究，解析推導出了不同尺寸生物質顆粒中心溫度達到充分熱解溫度的時間（ t ） ，得出了理論推導的充分熱解時間與最大產油率的熱解時間相一致的結果，為閃速熱解反應器固相滯留時間設計和預測提供了理論依據； （ 5 ）根據上述實驗結果，綜合運用工程力學、工程材料、機械設計學原理，推導、建立了轉錐式閃速熱解反應器物料滯留時間（ ）與轉速（或頻率）合理匹配理論； （ 6 ）提出了轉錐式閃速熱解反應器的最小錐角設計、錐壁強度設計、生產能力設計理論和功率計算方法及臨界轉速理論等。
  6. The dynamics behaviors of the flexible jeffcott rotor system supported by unsteady short dynamic bearing are investigated. based on nonlinear unsteady - state dynamic n - oil film force model described by three functions the local stability of the periodic solutions with the controlling parameters, rotational speed ratio, imbalance amount, damping ratio and viscidity, are predicted by using the floquet multiplier. it is found that the period doubling bifurcation is caused by a certain imbalance amount and the hopf bifurcation is created by the lost stability of the oil - film

    研究了非穩態動載短軸承支撐的jeffcott柔性轉子系統的動力特性，基於可用三個函數表示動態油膜的非穩態非線性油膜力模型，將轉速比、不平衡量、阻尼比、粘度作為控制參數，利用floquet乘子預測周期解的局部穩定性，發現倍周期分叉是由一定量的不平衡引起的，而hopf分叉是由油膜失穩造成的。
  7. We discuss the influence on the flux and torque when the multi - voltage space vector is applied on the motor. then the strategy of producing hexagon flux or circle flux is proposed. it is believed that, in order to control the torque optimally in dtc system, the stator current needs to be observed predictably

    論文在闡述異步電動機的直接轉矩控制原理的基礎上，詳細分析了多電壓空間矢量對磁鏈和轉矩的影響，給出了六邊形磁鏈和圓形磁鏈以及定子電流預測的設計方法，提出了一種新的轉速環控制方法。
  8. The direct analysis method has more efficient than the line programming for the shakedown analysis of contact surface layer, therefore, the mentality of shakedown analysis of contact surface layer was introduced based on the direct analysis method as follows : first, the direct method for shakedown analysis was presented and its application to a two - dimensional rolling / sliding contact problem was demonstrated. the direct method consists of operator split technique, which transforms the elastic - plastic problem into a purely elastic problem and a residual problem with prescribed eigenstrains, and an incremental projection method to determine the eigenstrain

    這些方法各有創新，其特點是計算速度快、收斂性好及精度可靠，計算規模避免了彈塑性隨動強化分析的非線性的影響，並使彈塑性問題轉化為殘余問題和線彈性問題，適用於滾動、滾滑及滑動接觸失效分析，從而有效地解決了接觸體安定性分析與裂紋萌生壽命預測的實際問題，也是本文對表面強化接觸失效的安定分析成為可能。
  9. At the case of cam - follower system at high speed, the inertia of kinetic components is bound to increase to a leap compared with the system at low speed, the elastic deformation of these components will affect the precision of the driven parts at special position, so the dynamic departure is inevitable

    當凸輪機構的運轉速度較高時，系統中運動構件的慣性力劇增，所產生的構件彈性變形的影響將導致工作端運動規律偏離預定的要求，產生不容忽視的動態運動偏差。因此，高速凸輪機構的研究正日益受到廣泛關注。
  10. Socket function mainly realizes setting up and initializing service unit socket, initializing service unit and service unit serial and so on. bind funcion primarily binds local address and port for the socket. listen function is to evaluate the max length of server ’ s listening queue. connect function and accept function set aside rate ahead, infrom user ’ s request of establishing virtual circuit to suna, cooperate with suna to establish the connection between client and server, return the result. we make use of three handshake with data protocol and virtual circuit mode, in this way, when we translate data, we can look up communication course according to virtual circuit number, at the same time, there aren ’ t source ip address and port, end ip address and port in the head of data package, the speed of translating data advances in a certain extent. send function and recv function is to send data collaborating with suna, and copy data from the receiving queue of socket to user ’ s buffer. close function cooperate

    Socket （ ）函數實現創建、初始化服務元套接字，初始化服務元及服務元序列等。 bind （ ）函數為套接字綁定本地地址和埠號。 connect （ ）和accept （ ）函數主要是根據用戶要求預留帶寬，將用戶的建立虛電路請求轉達給服務元網路體系，協作服務元網路體系採用捎帶數據的三次握手協議建立虛電路，並告訴用戶處理結果，一方面，捎帶數據的三次握手協議在一定程度上可提高數據傳輸速度;另一方面，採用虛電路方式，使得數據通信可直接根據虛電路號查找相應的通信進程，而且數據包的包頭中省去了源ip地址、埠號和目的ip地址、埠號，提高了數據傳輸速率。
  11. According to the theory of developing viscous crude with screw pump and combined with the reservoir characteristic and oil property, fault block 70 is developed reasonably and effectively through a series of corollary technique including chemical pre - processing in the formation, viscosity decrease in the well bore, down - hole anchoring of screw pump, optimized design of screw pump, reasonable determination of the turning rate of screw pump, frequency alternating control, heat exchange and viscosity decrease in well head, monitoring of screw pump

    依據螺桿泵開采重油的理論，結合澤70斷塊稠油油藏的特點和原油物性，通過實施地層化學預處理、井筒降粘、螺桿泵井下錨定、螺桿泵優化設計、螺桿泵合理轉速的確定、變頻控制、井口換熱降粘、螺桿泵監測等一系列螺桿泵配套工藝技術，使澤70斷塊得以合理有效的開發。
  12. A fast non - iterative global motion estimation ( gme ) algorithm is disclosed for estimating the perspective transform global motion parameters from the motion vectors ( mv ) obtained from the block matching process that includes grouping a plurality of motion vectors in the input video stream into a predetermined number of groups of motion vectors, calculating a set of global motion parameters from each of the predetermined groups of the motion vector, and processing the set of global motion parameters generated from the calculation to obtain a final estimation

    本發明系關於一種快速非反覆式全域移動估測方法，以由區塊匹配程序中所獲得的移動向量去估測一透視轉換全域移動參數，其包含一分組步驟，將該輸入影像資料流中的多個移動向量區分成具有預定數目的移動向量之群組?一計算步驟，系依據每一群組中之移動向量，求取該等群組之全域移動向量參數值?一處理步驟，系處理計算步驟中所計算出的每一群組之群組全域移動向量參數值，以獲得一最後之全域移動向量。
  13. There will appear a very uneven flow field, and appear a very big velocity magnitude distribution and ash concentration distribution near back wall. thus, the velocity magnitude is far bigger than that of optimal design velocity magnitude, which will lead to serious wear and tear in metal face of heater. especially, because of curve structure in front of heat pipe air preheater, there is more serious wear and tear

    由於靠近豎井后墻面的煙氣流速很大，飛灰濃度也較大，斷面速度分佈的最大速度大於最佳設計速度的2 - 3倍，這樣將造成受熱面的嚴重磨損，特別是熱管空氣預熱器前端煙道的幾何結構有一定的轉角，更增加了磨損的程度。
  14. This system provides pulse signal and direction signal to step motor driver by computer ’ s controlling step motor control card, and makes motor and guage ’ s pointer rotate. computer gets the micro displacement measured by grating measuring system via rs232 serial port, and acquires guage ’ s image by high precison ccd camera, then processes the guage ’ s image by software, including pre - processing, graying, binarization, thinning and hough transform, so as to recognize the position of guage ’ s pointer, finally calculates all kinds of precision on basis of algorithm established by national detecting rules of gauges

    本系統通過計算機控制步進電機控制卡來給出步進電機驅動器需要的脈沖信號和方向信號，進而帶動電機驅動儀表指針轉動，計算機通過串口實時採集光柵測量系統的微位移信號，並且通過高精度ccd攝像機實時獲取表盤圖像數據，同時通過計算機軟體實現表盤圖像處理，包括預處理、灰度化、二值化、細化和hough變換等，最終快速識別出表盤指針的位置，並根據國家表類檢定規程所制定的演算法檢定出指針式儀表的各種精度。
  15. It can also determine the fault spot and reason. this technology has been used in some technological fields and proved efficient. it has promoted the revolution of maintance system and the historial protection is replaced by preventive maintenance. with this technology, we can improve the reliability of machine and decrease the maintance fee. recently, reserch has pick up a fervent pace in the area of fault diagnosis of electrical machines. the paper simply analyzes the fault reason of electrical machines, stressly describes and explores the methods of condition monitoring and fault diagnosis such as partial discharge, stator current, rotating speed, vibration etc. fault prognosis is now include diagnostic feature, reason, spot. prodigious improvement in signal processing hardware and software has made this possible. primarily, these techniques depend on locating specific harmonic components of the fault. these harmonic components are usually diffirent for diffirent types of faults. automated tools such as fuzzy logic based system is also simply presented in the paper

    本文從絕緣結構的故障機理入手，以絕緣結構故障的典型特徵? ?局部放電為研究對象，重點討論局部放電的在線監測方法、適用場合併比較它們的優缺點；在分析籠型異步電機轉子斷條在線監測的定子電流監測方法后，根據其缺陷，本文探討了溫升不平衡法、希爾伯特變換數字濾波、小波包分析法的原理及優點；以電機軸承、氣隙偏心等故障為研究對象，通過對電機振動和轉速頻率的檢測，診斷電機的故障類型；本文的重點工作是將人工智慧技術中的模糊技術應用於電機的狀態監測和故障診斷中，力求使電機故障診斷更接近人工智慧化；最後，本文對電機狀態監測和故障診斷系統進行了硬體和軟體初步設計，為實現預測維修提供了有效的技術手段。
  16. This paper focuses on a single - axis speed turntable, generally establishes mechanical and electrical systems in turntable, basing on domestic and abroad research and the acquirement of its predefined function and actual circumstance

    本文以單軸速率搖擺臺為研究對象，在綜述了國內外轉臺研究現狀的基礎上，根據轉臺預定的性能指標要求和實際情況，從總體上建立了轉臺的機械和電控系統。
  17. 2 ) temperature analysis of spindle bearings : using the basic theory of heat transfer, the paper founds the heat transfer model and derives the heat transfer resistance and heat transfer equations in spindle units. 3 ) running performance analysis of spindle bearings : the paper analyses the running performances with the influences of the friction heat, structure and application parameters through an example. 4 ) stiffness analysis and testing of spindle bearings : using hertz contact theory, the paper derives the stiffness formula, computes, analyzes and tests the stiffness through an example

    4xio 『 ，定壓預緊下，陶瓷球軸承的剛度大於全鋼軸承，而定位預緊下則相反； 5 ）一般，軸承中球的溫度最高，內圈次之，外圈溫度最低，但定壓預緊廠轉速達到一定值時，外圈溫度可能高於內圈； 6 ）主軸平動固有頻率和軸承徑向剛度的測量值與計算值基本一致，忽略w1 ） d的影響使測量值小於計算值，表明理論分析是正確的。
  18. Thereby the engine changes its speed to the rate corresponding to the rate set properly in advance

    因此主機轉變它的轉速到預先適當設定的相應比率值。
  19. According to the structure characteristics and motion rules of the new type nursing robot, the close loop control system of this new type nursing robot is designed and made with the virtual instrument developing software labwindows / cvi, mcu, piezoelectric ultrasonic motor and high precision optical incremental encoder, which can make the robot reset and rotate by the predefined tracks. at the same time, in order to make the nursing robots used more widely where intensity, precision and price are not high, another control system is designed with the step motor, virtual instrument developing software labwindows / cvi, multi - function daq card pci1711, linear power amplifier. in order to use the nursing robots in acupuncture therapy, a simple finger is designed

    在對其結構特點和運動規律分析的基礎上，本文以虛擬儀器編程語言labwindows / cvi為軟體開發工具，以單片機為控制核心，以超聲電機為驅動元件，以高精度光電編碼器作為速度和角位移檢測裝置，實現了機械臂的復位以及預定軌跡的閉環控制系統的開發;同時為適應一些強度不大、精度要求不高的應用場合，也為降低成本，簡化控制裝置，推動新型護理機械臂短期內應用推廣的需要，以目前應用較為廣泛、控制技術較為成熟的步進電機為驅動元件，用labwindows / cvi開發環境、 pci1711數據採集卡以及線性功率放大器開發了一套控制系統，實現了手臂的復位、勻速運動以及預定軌跡的控制系統;為推廣護理機器人在針灸理療中應用，設計了簡單的手指機構並利用labwindows / cvi開發環境，以及智能材料驅動器? ?層疊式壓電驅動器，進行了手指的抓取以及對驅動對象的轉動控制。
  20. It is found that when the ratio of frequency is less than 1, the equivalent stiffness will be increased with the rising of the rotational speed in the certain conditions

    研究表明:在一定安裝、潤滑和預緊條件下，當頻率比< 1時，軸承等效剛度隨著轉速的升高而升高。
分享友人
分享到 Line

分享到臉書