頻率補償 的英文怎麼說

中文拼音 [bīnlǜbǔcháng]
頻率補償 英文
frequency compe ation
  • 頻 : Ⅰ形容詞（次數多） frequent Ⅱ副詞（屢次） frequently; repeatedly Ⅲ名詞1 [物理學] （物體每秒鐘振動...
  • 率 : 率名詞（比值） rate; ratio; proportion
  • 補 : Ⅰ動詞1 （修理; 修補） repair; mend; patch 2 （補充; 補足;填補） fill up; add supplement; supply; ...
  • 償 : 動詞1. （歸還; 抵補） repay; compensate for 2. （滿足） meet; fulfil
  • 頻率 : frequency; rate
  • 補償 : compensate; make up; make up for; make it up to sb. ; make sth. good; compensation; offset
  1. Fourthly, according with the analyzing of flow measurement, we research the main problems needed to be solve in the process of measurement, such as analysis and measurement of the internal resistance, selection of excitation frequency, stable signal datum mark and restraining common mode interference, restraining for serial mode interference and working frequency interference ; transporting and shielding the flow signal, constant current excitation and magnetic field equalizing, flow measuring

    第四，根據對流量測量問題分析的，深入研究了設計過程中需要解決的主要問題。如內阻分析與測量;勵磁頻率的選擇;穩定信號基準點與抑制共模干擾;串模干擾與工頻干擾抑制;流量信號傳輸與屏蔽;恆流勵磁與磁場補償;流量測量點的選擇等。
  2. Analysed the frequence compensation and noise response of the op amps extent

    對電路的頻率補償和噪聲性能進行了一定的分析。
  3. Can technology traits are analyzed, and can technology is applied on the power factor dynamic compensation system. on the basis of analyzing thoroughly the theories and techniques, software module of power factor dynamic compensation system are classed and their time - period is analyzed. the techniques of real time sampling idle current and generating compensation current are simulated with software

    在分析電網的頻率特性和功率因素動態補償系統的性能特點基礎上，對功率因素動態補償系統的軟體功能模塊進行了層次劃分和時序特點分析；對無功電流實時檢測、無功補償電流的產生等技術實現了軟體的模擬。
  4. Secondly, according to the character of this kind of harmonic, the solutions of power filter are deeply analyzed and an optimized topology for series connected hybrid power filter is obtained. by pwm technique, midfrequency transformer and the principle of the magnetomotive force ( mmf ) compensation, the problem to the transfer of the low - frequency harmonic power compensatory signal in the series apf is solved, in technique

    其次，針對acem系統特有的「電源諧波」特性，深入分析了濾波器方案，得到了一種適用於acem系統諧波抑制的串聯混合型有源電力濾波器優化拓撲結構，並採用了pwm調制技術、中頻注入變壓器和磁勢補償原理有效地解決了串聯apf中低頻諧波功率補償信號傳輸的難題。
  5. This text divides into five chapters altogether : chapter one in the introduction, have introduced the common sensor of displacement, has pointed out the fine characteristic of hall ' s sensor, put forward the basic task ; chapter two have introduced the basic operation principle of hall ' s component ; chapter three introduce hall temperature performance, electromagnetic characteristic, zero error, frequency characteristic and these parameter commonly used compensation method and hall simple application of component ; chapter four having recommended the measurement principle of the feedback servo mechanism, systematic implementation method, the experimental result has appeared, structure the mathematics model, and has analysed the error ; chapter five have pointed out the developing direction in the future while looking forward to

    本文共分為五章：第一章緒論中，介紹了常見的位移傳感器，指出了霍爾傳感器的優良特性，提出了基本任務；第二章介紹了霍爾元件的基本工作原理；第三章介紹了霍爾元件的溫度性能、電磁特性、零位誤差、頻率特性以及這些參數常用的補償方法和霍爾元件的簡單應用；第四章介紹了反饋隨動機構的測量原理，系統的實現方法，給出了實驗結果，構建了數學模型，並對誤差進行了分析；第五章展望中指出了今後的發展方向。
  6. From the result we get the following conclusion : for narrow - band signal, the effect of the method based on fft is best. for wide - band signal, when snr is up to certain degree ( higher than - 7db or so ), the curves of square error of modified methods are more obvious and closer to crb. for an echo composed of more than one frequency or direction, space - frequency distribution could show more direct information of frequency and direction, which is more advantaged to make precise judge and estimation for doa of echo

    從估計結果發現，對于窄帶回波信號，基於fft的方法估計性能大大優于其他方法；對于寬帶回波信號，在信噪比達到一定程度（高於約- 7db ）時，補償后的幾種估計法的性能改善均比較明顯，誤差曲線越來越接近crb曲線；對于回波中存在多頻率多方位的情況，空間?頻率分布圖能提供較為直觀的頻率及方位信息，因此應用空間?頻率估計法來進行方位估計，更有利於進一步對回波的具體方位進行準確判斷和估計。
  7. At first some modification is made in conventional beam forming of frequency domain, namely to estimate doa by arrays outputs on compensated spacial frequency points of echoes. then the cwt is utilized to signal processing in space - frequency domain for estimation of doa, and the corresponding modification is also made. in the dissertation, the computer simulations of doa estimation for both narrow - band and wide - band echoes are given, so do the necessary comparison among several methods and crb

    首先在傳統的頻域波束形成演算法的基礎上，提出對寬帶信號的頻率補償，也即對寬帶回波信號的各空間頻率根據時間頻率的差異進行相應補償，然後對各陣元輸出求和來得到方位估計；其次將連續小波變換引入到空間?頻率處理中，從而完成對目標方位的估計，並進行了相應地補償。
  8. Due to the short distance among the planes which fly in a group, the conventional low resolution radar can not distinguish them in both distance and azimuth ? if we use the technology of isar to resolve the difference among doppler frequency of the targets and obtain a fine resolution cross - cross image, we may separate them, but a long time of coherent processing is needed <, for the formation targets, it can be approximately divided to rigid body and nonrigid body, so for the formation targets, that can be regarded as rigid which has a relative position and an identical movement, can be approximately considered as a large target, and be compensated by translational phase with the rule of minimum entropy, but for the most those cannot accord with the approximation of rigid, being the doppler - frequency of the aim is linear changed, by the relax method with short data, increases the resolving performance of multiple target to the aim in the frequency domain, since cross - range resolution is based on the accumulative time, so it is greatly improve the resolution to formation targets by the instant cross - range image which produced by radon - wigner transformation

    低分辨isan成像及干涉技術應用研究一因此直接無法分辨編隊目標的架數，我們借鑒isar的技術，通過較長時間的相干積累，在多普勒頻域上對目標進行分辨。而對于編隊目標，可分為近似剛性的多目標和非剛性的多目標，所以對于可以近似為剛體的編隊目標相對位置固定，運動方式一致，可以近似看作一個大目標，採用最小墑準則對平動相位的進行補償，但是大多數並不滿足剛體近似的編隊目標，由於目標在相干積累時間的多普勒頻率近似呈線性變化，通過對較短數據利用relax的時頻分析方法，提高了頻率域上目標分辨的性能。由於橫向解析度取塊于橫向積累時間，所以利用radnwigner變換得到瞬時的一維橫向距離像大大提高了對編隊目標的分辨，對模擬和實測數據的大量分析結果表明此方法的有效性和可行。
  9. This paper introduces a power controlling system for electrosurgical generator based on thyristor, and proposes a power compensating method to maintain the output power invariable when the ac voltage fluctuates

    介紹了基於可控硅整流電路的高頻電刀控制系統，並針對該類型電刀的輸出功率隨電網電壓波動而發生漂移的問題，採用了一種功率補償的方法，實現輸出功率在不同的電網電壓的波動下保持恆定。
  10. This paper introduces a power controlling system for electrosurgical generator baaed on thyristor, and proposes a power compensating method to maintain the output power invariable when the ac voltage fluctuates

    摘要介紹了基於可控硅整流電路的高頻電刀控制系統，並針對該類型電刀的輸出功率隨電網電壓波動而發生漂移的問題，採用了一種功率補償的方法，實現輸出功率在不同的電網電壓的波動下保持恆定。
  11. A new bit rate control strategy with both global pre - allocation and local segmentation ( glas ) for low bit rate application is proposed. first, it allots bit date to every frame in advance according to possessive rate of buffer, and then distribute different quantization parameters according conctete detail. by means of this method, buffer is controlled more particularly. and the quality of decoded image is improved, the traditional video image coding method, that is to say, the intraframe coding based on dct and the interframe prediction coding based on motion compensation, is not suitable for low bit rate compression and aside from this, the encoder is too complicated

    它首先在總體上根據緩存器的佔有率給每幀預分配比特數，然後再根據具體細節給予不同的量化參數。使緩存器得到了更細致的控制，解碼圖像的質量有所改善。針對傳統的視頻圖像編碼方法，即幀內基於dct的編碼加幀間基於運動補償的預測編碼存在不適于低比特率壓縮，編碼器復雜等不足，討論了基於3 - ddct的xyz視頻圖像壓縮編碼方法，提出了3 - ddct系數的三維「 z 」形掃描方案，大大提高了編碼效率。
  12. The thesis has done the widespread investigation and study to the domestic and foreign ’ s technologies of analogy low voltage and low power, and analyzes the principles of work, merts and shortcomings of these technologies, based on the absorption of these technologies, it designs a 1. 5v low power rail - to - rail cmos operational amplifier. when designing input stage, in order to enable the input common mode voltage range to achieve rail - to - rail, it does not use the traditional differential input pair, but use the nmos tube and the pmos tube parallel supplementary differential input pair to the structure, and uses the proportional current mirror technology to realize the constant transconductance of input stage. in the middle gain stage design, the current mirror load does not use the traditional standard cascode structure, but uses the low voltage, wide - swing casecode structure which is suitable to work in low voltage. when designing output stage, in order to enhance the efficiency, it uses the push - pull common source stage amplifier as the output stage, the output voltage swing basically reached rail - to - rail. the thesis changes the design of the traditional normal source based on the operational amplifier, uses the differential amplifier with current mirror load to design a normal current source. the normal current source provides the stable bias current and the bias voltage to the operational amplifier, so the stability of operational amplifier is guaranteed. the thesis uses the miller compensate technology with a adjusting zero resistance to compensate the operational amplifier

    本論文對國內外的模擬低電壓低功耗技術做了廣泛的調查研究，分析了這些技術的工作原理和優缺點，在吸收這些技術成果基礎上設計了一個1 . 5v低功耗軌至軌cmos運算放大器。在設計輸入級時，為了使輸入共模電壓范圍達到軌至軌，不是採用傳統的差動輸入結構，而是採用了nmos管和pmos管並聯的互補差動輸入對結構，並採用成比例的電流鏡技術實現了輸入級跨導的恆定;在中間增益級設計中，電流鏡負載並不是採用傳統的標準共源共柵結構，而是採用了適合在低壓工作的低壓寬擺幅共源共柵結構;在輸出級設計時，為了提高效率，採用了推挽共源級放大器作為輸出級，輸出電壓擺幅基本上達到了軌至軌;本論文改變傳統基準源基於運放的設計，採用了帶電流鏡負載的差分放大器設計了一個基準電流源，給運放提供穩定的偏置電流和偏置電壓，保證了運放的穩定性;並採用了帶調零電阻的密勒補償技術對運放進行頻率補償。
  13. Battery is the only power source for portable equipment. in order to prolong the service time of these battery - operated equipments, ultra - low - power consumption is demanded. the main method that decreases the power losses is to higher the conversion efficiency and to lower the operating voltage

    開關變換器內包含了帶隙參考電壓源、誤差放大器、頻率補償電路、三角波產生電路、 pwm比較器以及數字邏輯控制電路，此晶元採用聯華電子公司0 . 6微米cmos工藝。
  14. Zero - pole frequency compensation

    零極點頻率補償
  15. In the first part, a new method of frequency compensate is presented in this thesis when there is only fast flower jammer

    一是系統僅受到快速跟蹤干擾的情況下，提出了一種新的頻率補償技術，利用多個跳頻點的數據來加快波束的收斂速度。
  16. ( 2 ) based on the mode of ultrasonic echo, this paper designs a frequency - dependent compensation filter to compensate the absorbed attenuation when the ultrasound transmits in a tissue

    （ 2 ）在建立超聲回波信號的數學模型的基礎上，設計了頻率補償濾波器。
  17. The programable unit of inspac is used first to work out the frequency compensating circuit adapted itself, the frequency band is extended. the application range of the manual sensor is extended

    首次使用isppac可編程器件製作自適應頻率補償電路，展寬了頻帶，拓寬了手持式傳感器的應用范圍。
  18. The combined motor vibration sensor which is held manually with double charge amplifier placed inside and with frequency compensating circuit is designed based on the existed press - electricity accelerator of vibration and the measuring vibration system of charge amplifier in the paper

    本文在現有振動壓電式加速度計、電荷放大器測振系統的基礎上，設計了手持式內置微型雙電荷放大器和頻率補償電路的一體化發動機振動傳感器。
  19. Using fourier transformation computational method, the fir filter was designed. the acceleration signal dynamic error was revised through the fft 、 ifft and frequency correction in the operating frequency scope. the signal processing had been realized on dsp, and the signal data was really recorded

    應用傅里葉變換的計算方法，並且完成了fir濾波器的設計，通過傅里葉正反變換和頻率補償實現工作頻率范圍內加速度信號動態誤差修正，在dsp上實現了信號處理，真實地記錄了信號數據。
  20. Harmonic tackling of low voltage grid and rational selection of reactive compensation equipment

    低壓變頻器的諧波治理和無功功率補償
分享友人
分享到 Line

分享到臉書